A little bug in my macro about time (excel 2007)

Hello,

I'm a senior computeruser from Belgium and I've made a macro where you can 
only see the time but there is a little bug in it.
That bug shows up when I use my macro for the second time in a other cell. 
When I used it for the second time, the cell where I used my macro for the 
first time changes into the same time of the cell where I used my macro for 
the second time.


This is how I made my macro: - I wrote in my formulebox --> =Nu()-Vandaag()
                                                                             
                          [translation --> =Now() - Today()]

                                                   - Then I clicked on the 
birdie where I put my formula in.

                                                   - Then I changed the 
notation to u:mm:ss

                                                   - Macro is ready

Everything worked except for that bug that mentioned earlier.

Can you help me?


Thanks in advance.

 

0
iso
9/17/2008 1:54:41 PM
excel 39879 articles. 2 followers. Follow

2 Replies
678 Views

Similar Articles

[PageSpeed] 9

Change your macro to not use a formula in the cell:

ActiveCell.Value = Time
ActiveCell.NumberFormat = "h:mm:ss"  ' or whatever format you like

HTH,
Bernie
MS Excel MVP


"�zg�r Arpaci" <da_cool_ozzyAThotmail.com> wrote in message 
news:e2%230zzMGJHA.2252@TK2MSFTNGP02.phx.gbl...
> Hello,
>
> I'm a senior computeruser from Belgium and I've made a macro where you can only see the time but 
> there is a little bug in it.
> That bug shows up when I use my macro for the second time in a other cell. When I used it for the 
> second time, the cell where I used my macro for the first time changes into the same time of the 
> cell where I used my macro for the second time.
>
>
> This is how I made my macro: - I wrote in my formulebox --> =Nu()-Vandaag()
>                                                                             [translation --> 
> =Now() - Today()]
>
>                                                   - Then I clicked on the birdie where I put my 
> formula in.
>
>                                                   - Then I changed the notation to u:mm:ss
>
>                                                   - Macro is ready
>
> Everything worked except for that bug that mentioned earlier.
>
> Can you help me?
>
>
> Thanks in advance.
>
>
> 


0
Bernie
9/17/2008 2:05:42 PM
Thanks it helped me really good.

"Bernie Deitrick" <deitbe @ consumer dot org> schreef in bericht 
news:Od4N35MGJHA.3664@TK2MSFTNGP05.phx.gbl...
> Change your macro to not use a formula in the cell:
>
> ActiveCell.Value = Time
> ActiveCell.NumberFormat = "h:mm:ss"  ' or whatever format you like
>
> HTH,
> Bernie
> MS Excel MVP
>
>
> "�zg�r Arpaci" <da_cool_ozzyAThotmail.com> wrote in message 
> news:e2%230zzMGJHA.2252@TK2MSFTNGP02.phx.gbl...
>> Hello,
>>
>> I'm a senior computeruser from Belgium and I've made a macro where you 
>> can only see the time but there is a little bug in it.
>> That bug shows up when I use my macro for the second time in a other 
>> cell. When I used it for the second time, the cell where I used my macro 
>> for the first time changes into the same time of the cell where I used my 
>> macro for the second time.
>>
>>
>> This is how I made my macro: - I wrote in my formulebox --> 
>> =Nu()-Vandaag()
>> 
>> [translation --> =Now() - Today()]
>>
>>                                                   - Then I clicked on the 
>> birdie where I put my formula in.
>>
>>                                                   - Then I changed the 
>> notation to u:mm:ss
>>
>>                                                   - Macro is ready
>>
>> Everything worked except for that bug that mentioned earlier.
>>
>> Can you help me?
>>
>>
>> Thanks in advance.
>>
>>
>>
>
> 
0
iso
9/20/2008 1:04:52 PM
Reply:

Similar Artilces:

Excel button problem
Hi All I have a macro that copies a worksheet in the active workbook and puts it into a new workbook - then formats it and deletes any buttons on the worksheet. On the first click on the button the macro works ok. On the second click, it fails because the all assigned macros on all buttons in the active workbook changed from "mba" to "book1!mba". Book 1 doesn't exists (wasn't opened, wasn't saved, doesn't have the macros). I've never experienced this problem before?? Can anyone help to solve this problem? FYI The macro to do this is c...

Excel 97 #9
Please can anyone help??? I have two columns in Excel 97. The first contains a list of statu values eg. pending, or granted or withdrawn. The second contains date eg.01/12/1997, 05/06/2003. I woudl like to know how to get all th granted apps before 31/12/2003. Can anyone help please -- Message posted from http://www.ExcelForum.com theres many ways, but an easiest way would be to do a sort. Highlight the 2 columns, click on data, then sort, then sort by status, then by date. this should group them all together. hope this helps...toe >-----Original Message----- >Please can anyo...

projecting the notes pages in PPT 2007
I want to project my notes pages to an on stage monitor in while my presentation (sans my notes) are projected behind me...I will run my notes from a second computer... How can I do it? Submitted via EggHeadCafe - Software Developer Portal of Choice C# : Image operations performer http://www.eggheadcafe.com/tutorials/aspnet/bbace980-2554-48d7-9421-73dc29ed3b21/c--image-operations-per.aspx Hi Fred See if Presenter View will do what you want with your set up: http://office.microsoft.com/en-us/powerpoint/HA100673831033.aspx?pid=CH100668261033 Lucy -- Lucy Thomson PowerPoint...

Stop My Documents from opening all the time?
Is there anyway to stop My Documents from opening everytimg I start a Windows Explorer session? I guess there's no future in trying to delete it, because so many products try to put stuff there. Right? Laurel wrote: > Is there anyway to stop My Documents from opening everytimg I start a > Windows Explorer session? > If you want Explorer to open somewhere else, simply modify the properties of the shortcut you're using to open it. All you need do is create/modify the target field of your Windows Explorer shortcut to point where you want it. Co...

Voice connector on Exchange server 2007.
Is there any functionality available in exchange server 2007 regarding voice connector? If not how can we create it? Thanks in advance. Ashwin Exchange 2007 has the "Universal Messaging" role which is intended for this purpose. Do you have a PBX? -- Ed Crowley MVP - Exchange "Protecting the world from PSTs and brick backups!" "Microsoft Exchange 2007 command shell" <MicrosoftExchange2007commandshell@discussions.microsoft.com> wrote in message news:FAE20A61-AD17-4218-90C2-9356CA90B2A0@microsoft.com... > Is there any functionality available in exch...

New to excel
Hi All, I'm new to Excel ( and to this forum :) ) and so I hope somebody may b able to help me. I've got 2 questions.... QUESTION 1 I've got a spreadsheet which takes data from one worksheet and uses i to calculate data in a second worksheet using the following code formula: =IF('4th November 2005'!B19="","nothing here dude",IF(B19<'4th Novembe 2005'!B19,"UP",IF(B19='4th November 2005'!B19,"Same",IF(B19>'4t November 2005'!B19,"DOWN")))) The problem is, when I create a new worksheet I have...

Looking for Excel Help
I'm a very novice Excel user and am looking for a little help with creating a formula for a spreadsheet I'm creating for my personal use. I would appreciate some assistance if possible. Thanks in advance. Dan --- Message posted from http://www.ExcelForum.com/ Hi Dan! Post a sample of what you want to do. Your question is just a tad open ended <g> -- Regards Norman Harker MVP (Excel) Sydney, Australia njharker@optusnet.com.au Excel and Word Function Lists (Classifications, Syntax and Arguments) available free to good homes. "DanB4105" <DanB4105.ywtpa@excelfor...

Excel corrupts when asking to update vlookups
We are experiencing weird behavior with some Office 2K3 Excel spreadsheets that contain lots of calculations, but no macros. On some pc’s Excel acts normally, on others you get the error. I have a couple of screen shots available. Any help is appreciated. If desired, send your file to my address below. I will only look if: 1. You send a copy of this message on an inserted sheet 2. You give me the newsgroup and the subject line 3. You send a clear explanation of what you want 4. You send before/after examples and expected results. -- Don Gu...

Uninstall of mappoint has caused errors with excel
Hi, I am running Office 2003 on the terminal server (windows 2003) and had a copy of mappoint as well. This is a mapping program. We ininstalled mappoint which has caused an error message with Excel and other office products. The error says "Cd:\documents and settings\administrator.ocrdc1\application data\microsoft\addins c:\Program files\common files\microsoft shared\geography\mpoai9.dll is not a valid add-in." I then click OK and excel opens up and everything is fine. The problem is that we are using other programs as well such as Quickbooks that export to excel and t...

I need a macro
I would like a macro to do the following: I would place the the cursor in any cell and this macro would give me the average of all the entries to the left if the selected cell. EX: I place the cursor in cell M12. I want this macro on display in cell M12 the average of all the values from Col C12 to Col L12. Note that there may NOT be entries in all the cells in that range. Also the start point would always be col C .Thanks You can do this easily with a worksheet_selection event in the sheet module but you would probably want to restrict to a certain range or columns and rows or it woul...

Over Time Pay rate 1.51?
Its that time of year again, Audit time. The auditors have come across a very strange problem it seems that around October of last year random employees have had there OT pay rates increased to 1.51 (instead of the standard 1.50), I cant for the life of me figure out how this has come to be. Has anyone come across this problem before? And is there something I can do to fix or prevent this from reoccurring? It’s just not feasible to check each employee every week before payroll. Im certain that the employees were setup correctly initially. Thanks I have seen this and have not been ab...

learning Excel #3
Hi, I was considering learning Excel as an additional tool for my data analysis work. Is it better to use data sets that I have previously used with SPSS and apply the same analysis tools as in SPSS? For applying the appropriate tools, I was considering using excel's online help. The second option I have is to use some excel book for data analysis and apply the techniques to data sets provided with the book. Any suggestions????? regards Metal ...

unable to paste Excel 2003 chart into Outlook 2003
(This was posted on "excel.charting" group.) I have a user who's unable to paste an Excel 2003 chart into Outlook 2003 email message. In Outlook options, the checkbox is selected for "Use Microsoft Office Word 2003 to edit e-mail messages". When I tested this on my own computer running the same version of Office, if the box is check, I have no problem pasting; if this box is cleared, I cannot paste. But on his computer, it doesn't work regardless. Thanks and regards, TL ...

How do I Remove a Split from my Comments in Excel 2003? #2
I have set my current workbook to split/freeze the first column and first 2 rows. Now, when I add a comment to the second row (in any column) my comments are cut off if I should scroll down. I don't ever remember the behavior before. And I don't know what I've done to enable it but it's really annoying. How do turn this off ? ...

Show date, time & day of week in one cell
Can I show the date, time and day of week in one cell. I have: 09/03/07 8:30 AM in one cell using the format (Format/Cells/Custom): [$-409]mm/dd/yy h:mm AM/PM;@ Excel refuses to accept ddd for Mon or dddd Monday at the end of the format I want it to read: 09/03/07 8:30 AM Monday in 1 cell. I have Excel 2003. One way: mm/dd/yy h:mm AM/PM dddd;@ In article <Xns99B8A3CAF9130pencilunlistedcom@208.49.82.220>, Burp <burp@beep.comINVALID> wrote: > Can I show the date, time and day of week in one cell. > > I have: > 09/03/07 8:30 AM > in one cell using the for...

How to set "licence" for Access 2007 database?
Hi I developed an Access 2007 db to a client. Now I want to make a year based licence for that database that the client must pay if they want to continue using the database after year. It must be so that database cannot be used after this date. How I can accomplish this? Thanks! On Mon, 12 Apr 2010 13:14:17 -0700 (PDT), Sandroid <santeri.virtanen@gmail.com> wrote: >Hi > >I developed an Access 2007 db to a client. Now I want to make a year >based licence for that database that the client must pay if they want >to continue using the database after year. It mu...

mail queues for long on Exchange 2000 server time before being sent
I have a situation where all outgoing mail sits in a queues on the Exchange 2000 server (one per domain) for about 45 minutes before being sent. The queues in question have a status of ready. There are also other queues of that are retries (mostly NDRs from junk mail). We are only a small company and the amount of mail is not great. What might Exchange be waiting for before sending this mail? Is there something I can tweak to make it send mail sooner? Thanks for any help, Angus. Angus, Where does the mail go after it leaves your Exchange server, does it go to a smarthost/isp or d...

how do I add error bars to a 3D chart in excel?
The help states you can only add error bars to data series in 2D area. Is there a way to add them to a 3D chart? Hi, I would not have thought so. Obviously as it is not a built-in option the only way would be a work around perhaps using dummy series. Unfortunately you can create 3d combination charts. Stick with the 2d view. Cheers Andy elahe wrote: > The help states you can only add error bars to data series in 2D area. Is > there a way to add them to a 3D chart? -- Andy Pope, Microsoft MVP - Excel http://www.andypope.info I checked, and error bars are not offered for 3D ch...

outlook 2007 e-mail
how do you stop e-mails from automatically downloading when you open outlook 2007. i would like to be able to open outlook 2007 and have it wait for me to select 'receive' before downloading e-mails to my system. i know there is a way to do it in outlook 2003 but i do not remember how to do it there and i cannot find how to do it in outlook 2007. -- emerson Uncheck the option to send/receive at a specific interval. --=81 Milly Staples [MVP - Outlook] Post all replies to the group to keep the discussion intact. All unsolicited mail sent to my personal account will be deleted w...

Exchange 2007 Content Conversion/Encoiding issue.
Hello I have an Exchange 2007 RTM box running in a Windows 2003 only domain. When we scan a document from our Dell 1815n multifunction and have the output emailed, the document shows up as encoded garble instead of an attached document. A message header from a bad email is below. When we scan a document from the same device and send it to a mailbox that still lives on our last remaining Exchange 2003 server, the output from the scanner is attached as a PDF document normally. Any ideas? Thanks Michael Buckley Header from email recieved to Exchange 2007: (server names and I...

I need to print a word in PDF from excel.
Hi, In my excel Macro, I update several values and then open a word linked with that excel. Finally what I need to do is to print that word to PDF. I already have a PDF Printer, so I just need the code to do it. Can anybody help me? Thanks in advance. Gast=F3n. Habilita la impresora predeterminada como la PDF y ya lo puedes imprimir a al formato deseado Gracias Francisco,=20 Tienes alg=FAn codigo para ello? gracias Repitiendo: Desde el panel de impresoras asigno primero la que me interesa y despues ejecuto mi macro desde el archivo excel asignando la instruccion sig: midefaultes = a...

Problem with named range for a large spreadsheet in Excel 2007
Hello, I am trying to generate a large Excel spreadsheet apprx. 10000 rows and 40 columns. I am generating defined name section in the Workbook.xml part of the XLSM package. Here is a sample entry from that section <definedName name="_._44802_._0_._0_._0_._top_line" localSheetId="0" hidden="1">Sheet1!$B$2</definedName> Although the generation goes fine, I can not open the spreadsheet as the Excel throws an error message saying the package is corrupt. But this is not the case if the spreadsheet is small say, 200 rows by 10 columns. ...

q Emailing Excel Sheet With Outlook
I am trying to send a table from Excel within the body of an Outlook (lastest versions) to be sent as a fax. Am able to do this, BUT when the document prints out on the fax machine the formating is off (too big for the sheet). I am flexible on changing the method I send it to the fax machine, however it must be sent to the fax via macro. Below is the code I am using. Any help would be greatly appreciated. David Public Sub DoIt() 'On Error GoTo Handler Dim EmailAddress(0 To 2) As String Dim Count As Integer Dim N As Integer Dim sRec1(0) As String Dim sRec2(0 To 1) As...

Excel VBA
When you select the autofilter, the drop down list is created from the unique data in that column. Is there any way to customize this list, so the changes are permanent? For instance, I might have in one(1) column the following 4 row entries: red, blue, green (all are single cell entries) red, blue red blue, green I want my autofilter drop down list to read: red instead of red, blue, green blue red, blue green red blue, green (like normal) If I chose red from the drop down list...

Outlook 2007 throws an error that it cannot receive email
Office 2007 Ultimate, Outlook 2007 (12.06514.5000) SP2. After sitting idle overnight Outlook 2007 throws an error that it cannot receive email. Closing Outlook 2007 and restarting it resolves this issue. Outlook/Office 2003 on my main PC does not exhibit this behavior. I've confirmed and re-confirmed my email client settings with earthlink.net and the problem does not appear to be there. Again, it seems to be with Outlook 2007 but only on this one PC (hp 180t Windows 7 Ultimate 64-bit). I did uninstall my Original Office 2007 Professional and re-installed Office 2007 Ultimate...