Feb 28,2008 ---> 2008-2-28
Feb 1,2008 ---> 2008-2-1
"����" <firstname.lastname@example.org> wrote in message
> Feb 28,2008 ---> 2008-2-28
> Feb 1,2008 ---> 2008-2-1
See your other post
> Feb 28,2008 ---> 2008-2-28
> Feb 1,2008 ---> 2008-2-1
Highlight the cell, right click in the mouse, cell format, custom format and
> Fe...Calendar Formatting Date Range problem
I am trying to make a monthly calendar that our administrator can update
easily with new dates, and mail out. I've formatted the calendar and it
looks great as it is right now for the month of April. However, when I
choose "change date range" it reverts back to the original formatting and I
have to start all over.
I realize this is because I used a "design object". However, if I don't use
a design object, then I can't change the date ranges.
How do I change the date range on my calendar without losing all the
formatting changes I made? Thanks
T...Bank Rec void check date s/b same as GL void date
When voiding a check in the payables management module and the Void date and
Posting date are changed from the original check date, Bank reconciliation
should recognize that void date instead of the original check date as the
voided date. Please refer to Knowledgebase Article 857704 to see how Ban Rec
handles the date of a void check.
If a check is voided in Payables Mgmt on a different date than the original
date, and bank rec uses the original date trying to reconcile to the general
ledger is a problem because the adjusted bank book balance is different than
the GL balance becuase th...Can I set up a calendar lookup for date selection
Is it possible to lookup a calendar for date selection on a cell. I cannot
find any reference to it in the help.
try this url
"Tangoxray" <Tangoxray@discussions.microsoft.com> wrote in message
> Is it possible to lookup a calendar for date selection on a cell. I
> find any reference to it in the help.
...Can you automatically date stamp emails that you send out? #2
My emails need a date stamp on them as I send them. It does not appear that
you can do this..does someone have an idea to do this? Thanks
...Help Please- How to offset Date to correct column for Ageing
I have a stock ageing sheet for finished goods, which uses a vlookup table,
on entry of the Product code (last 3 Digits), this populates the next three
columns with description, FG cost and Quantity of product. the quantity of
product is entered again manually into the appropriate column, there are
five columns these are banded <3 Months 0%, 3 to 6 Months 25%, 6 to 9 months
50%, 9 to 12 Months 75% and > 1 Year 100%, the percentage is liability
What I would like to do is on entry of the product code as above the
quantity is automatically inserted into the correc...Copying dates between Excel documents
I have noticed that when I copy a date eg/ 23/02/04 (UK format) from on
Excel document to another the date becomes 22/02/00.
Has anyone comes across this, its really infuriating as I have t
redate everything again
Message posted from http://www.ExcelForum.com
XL has two date systems, the Windows default 1900 date system, in which
the 0-base date is 31 December 1899, and the MacXL default 1904 date
system, in which the 0-base date is 1 January 1904. The systems differ
by 4 years and a day.
To resolve your issue, make sure that both workbooks have the same date
system selected...Change Order date?
I have situation where we had to enter some orders into CRM like 3
weeks after the fact but there was no way to to back date them when
entering so that they fall into the proper months reports, etc. Any
help out there on how I can change the dates at the database level?
Look in the SalesOrderBase table.
"SteveT" <email@example.com> wrote in message
> I have situation where we had to enter some orders into CRM like 3
> weeks after the fact but there was no way to to back date them when
> entering ...Can't get Date Range to work from Form to Report
I've followed Allen Browne's directions very closely for creating a form for
a date range to limit results to that date range on a report and can not get
it to work for some reason. I've read many threads on this board which all
say the same thing and it seems to work for everyone else. :(
Here's what I have:
A form with two unbound text boxes called [txtDateBegin] and [txtDateEnd].
The form is called "frmDateRange" and the report is called "Sales Activity
Report". The two unbound text boxes are set to "Short Date" format which the
user ...Sorting List Control
Hello everyone, I am having a difficult time sorting a report type list
control. It has 3 columns. What I would like to do is that each time
a user clicks on a column, I would like to sort it on that column. I
hope that makes sense. Its much like the way the Windows Explorer
works in which when you click on the filename, it sorts it by filename,
and when you click it on type, it sorts it by type etc.
I was looking into the CHeaderCtrl gives me control over the header,
but I wasn't sure what to do after that.. :(
Take a look here for an example
http://www.codeproject.com/lis...Publisher 97 and date/time print
I am designing an office card using 1997 Publisher. No
matter what I do it prints day, month,year and time on
every page. I have checked background and there is no
text box even there to delete to stop this problem. How
can I find and delete?
This will be an option of your printer driver. Disable that option and your
trauma will be over.
...Dollar and date format
I have 2 questions related to formatting information that I have imported:
1)If I have a column that contains amounts such as 0000000427.99 and I want
to remove the decimal but keep the trailing cents, what is the best way to do
that for a whole column? example: 000000042799
2) I also have a date that has been imported as 3/9/2005 and I need to
remove the "/"'s and have the month and date format with zeros if needed such
as 03092005, what is the best way to accomplish this on a column.
For Question # 1 - Multiply by 100 :-)) Just kidding
For Question # ...Calculating dates & creating reports
I need to design a database that will calculate due dates for evaluations.
It will have 5 dates. 4 are calculated. These dates need to be on a form
along with the employee's name and other vital info. The user should be able
to enter that Start Date and have all the other dates calculate
automatically. There are approximately 55 employees! The first date (Start
Date) is entered by the user.
User enters Start Date: 2/01/07.
#2 Next Date is 91 days from 2/1/07, which calculates to 5/03/07.
#3 Six Month Date is 182 days from Start Date, which calculates
to 8/02...Report to Filter on Next Date Per File
I have a docketing report which reports any action due for a particular file.
Theses actions are future dates. A file can have multiple actions due.
Action 6/1/2010 Letter to Client
Action 6/9/2010 Payment Due
Action 12/10/2010 Status Check
Action 3/1/2011 Letter re Exam
Action 6/4/2011 Annuity Due
I need to write a report which will only give me the next action due. Using
my example the output would be like the following:
Action 6/1/2010 Letter to Client
Fil...Date sensitive cells
I am trying to create a contract management system and would like to input
all the relevant data into a spreadsheet. A month before a contract runs out
I would like all the data relevant to it to be highlighted or in some way
made obvious that the contract is coming to an end and needs the attention of
Can anyone help me with this?
Thankyou very much
Let's say that the expiration date of the contract is in cell B1, and you want all of row 1 to turn
red when you are within 30 days of that date.
Select row 1, the use format / Conditional formatting, select for...Home Page Content Item: Important Dates (repost)
I asked this question 3 days ago and have received no replies so I'm
repeating it. Perhaps the subject name I used: "Important Dates" was too
short or sounded like spam. In any case my experience on this board is that
even if no one has a solution, someone usually responds saying that he can't
reproduce the problem, or that it doesn't work for him either, or that the
poster misunderstands what this function is supposed to do. Not having
received any response at all, I beg your indulgence with this repost:
Money 2006. No Passport. XP Home SP2. P4 3.0 GHz. 1G...Getting local Time and date for the local computer(vista OS)
Hi I am working with Vista(one of a kind),
and have a MFC application and would like to add small code that will get
current time and date from the local compuetr.
i meet an example in MSDN :
but it looks too long for what i am looking, is there a 1 function API that
returns the Date and the time ?
thanks for your time
>Hi I am working with Vista(one of a kind),
>and have a MFC application and would like to add small code that will get
>current time and date from the local compuetr.
>i meet an example in MSDN...Formula For Monthly Date
I have a worksheet that has products listed that are on sale at different
times of the year. My question is what formula to use to get all Jan
products,codes,prices etc on to new worksheet, Feb on another worksheet etc.
Use Autofilter. See:
> I have a worksheet that has products listed that are on sale at different
> times of the year. My question is what formula to use to get all Jan
> products,codes,prices etc on to new worksheet, Feb on another works...day of the week and date formula
I am looking to write a formula that gives me the difference in hours
between a logged date and time and a closed date and time eg -27/11/2009
30/11/2009 10:34:20. Once I have this I need to calculate the working
hours used to resolve the issue. If the duration of the time includes a
weekend, a saturday would equate to 4 hours working and a sunday would be 0
hours working time, a week day equates to 11.5 hours working.
we need to know what hours during any day are considered working - ie, do
all hours...Date range in months from month and year fields
In our database we track consultants work dates in four seperate fields,
starting month, starting year, ending month, ending year.
Is there anyway to calculate the range of months they have worked with this
So if someone started March 2004 and ended July 2007 is there a formula to
calculate the 40 months they worked?
DateDiff("m",[starting month] & "/" & "01" & "/" & [starting year],[ending
month] & "/" & "01" & "/" & [ending year])
> In our da...problem with dates in csv file
I'm trying to save a .csv file at the moment, the person who I'
sending it to needs the dates in 1 column as dd-mmm-yy, eg 18-Sep-05
eg 09-Sep-05. When I save the file it always reverts the dates 09 o
below back to a single number, 9 etc.
I've tried copying the column into word, paste special as text
formatting the column in excel to text and pasting special back in a
text, it works ok but when I save and open the file it reverts back!
does anyone know how I could get around this?
I use the Outlook Notes program quite a bit. But, there are two problems I
have with it:
1. It sorts most recent to oldest -- is there any way to change the sort
order to alphabetical?
2. I'd like the default "note" size to be a little larger? Is this
I can answer part of this one. To make the note a little larger - Tools,
Options, Note Options, Size.
<EHPorter> wrote in message
> I use the Outlook Notes program quite a bit. But, there are two problems
> have wit...Large List Sorting
Have a problem. I'm developing an application which reading a large database
file (DBF) and displaying it in the list control. Because of the size of the
file (>15 MB, later it will be increased) I'm using a virtual list (owner
But now I need to sort data in the list. AFAIK to perfirm this I should read
the whole file. In this case my program starts several minutes!!! It doesn't
have to be like this [(C) Pink Floyd]...
Is there any methods to load a large amount of data as quickly as possible?
Or I just should humble, 'cause sorting of large amount of d...Can't open this item. The end date you entered occurs before the start date.
Everytime I open Outlook 2000 I get a calender pop-up. When I Dismiss it I
get a message such as the above and the next time I open Outlook it appears
again. I can't see it in the Calender unless I change the view to "By
category". I can't delete it or change the date in this view. I just keep
getting the above message (see subject line).
I tried /cleanreminders and the MS article about Daylight savings but
How do I get rid of this message?
I do have a Pocket PC and probably the error occured during a Sync (i have
different time zones).
...Sort House Numbers
How can I get excel to sort house numbers as I would like, i.e
1,2,2a,3,4,5,5a,5b, et. etc.
So far I've ailed miserably. Any help out there? TIA
You will have to separate the digits into a separate cell.
Extraction of a Group of Digits and Dashes, from postings by Harlan Grove
Extract the First Set of Digits (#DigitsFirstID)
David McRitchie, Microsoft MVP - Excel [site changed Nov. 2001]
My Excel Pages: http://www.mvps.org/dmcritchie/excel/excel.htm
Search Page: http://www.mvp...