"grouping" a table to prevent change from users
I would like to group an entire table with a wdContentControlGroup type
of Content Control to prevent editing from users except in some
wdContentControlRichText type of Content Control.
I'm having problem in passing the right Range of the table.
If I use:
Set r = .Tables(1).Range
Set objcc = .ContentControls.Add(wdContentControlGroup, r)
an error "5224" "Wrong selection" arise.
If I use:
Set objcc = .ContentControls.Add(wdCo...Adding records to table from a form, with pre-populated values
I'm trying to construct a form that will let me translate pre-defined "base"
sentences to several languages. I have the following tables:
BaseTexts: ID, Text
Translations: BaseTextID, Language, Translation
but the Translations table only has records if a translation actually
exists. So I have a query that gets me all (BaseTextID, Text, Language)
triplets for which a translation is needed (Text <-> BaseTextID is 1-1
mapping, but users need to see the text itself in order to translate), and I
want to present a multiple-records form with 4...pivot from more than 65K lines: how?
What I am trying to do: have several excel files with data and want to
consolidate in a single file
What I did: tried to paste all the data in a single file and create a pivot
from there... the problem is that I can not copy after reaching 65K
Trying to create a pivot from *multiple* excel does not give me the
possibility to put in the layout the fields I want (as if I was using a
single sheet)... as it consolidates all the fields in the different
Any urgent help please?..
Do you have Access? If so then import all your excel sheets into a singl...Intelligent Pivot Table with Large Data Sets
Pivot Tables are great with small datasets.
Does anyone have suggestions of products that can datasource from a
ODBC source and manage large datasets (1M+ rows), visualizing the dat
in a crosstab/pivottable format ?
Unfortunately the underlying logic in the PivotTable/MSquery link isn'
too intelligent in that is always wants to read the whole darn databas
table before even presenting a field list. I assume this is due to th
abstraction of the data created by sticking MS/Query inbetween th
Excel pivot table service and the actual datasource?
Seems pretty simply from a conceptual POV:
1. ...2 pivot tables on one tab
Is it possible to put 2 Pivot tables on the same tab in my workbook?
Or does anyone have any ideas on what would be the best way to chart Capital
Pircahses? I have 5 coums and 4 rows. The rows are per division, and the
columns are for the disposal amount, gain or loss, book value, depreciation &
purchase price. I already have one pivot table in my report. Would this be
You can put multiple pivot tables onto a worksheet. If the second one is
based on the same data, select and copy the first, select a cell some
distance away, and paste it. Each pivot table...Need help with SQL tables
After running a security reconcile sa was no longer a user in GP. I received
the answer below about re-adding it, but I don't know how to add a userid in
to a table. I can't find anything on knowledgebase about this. We don't
have the SQL Enterprise Manager but use the SQL 2005 Management Studio
Can anyone help me? I just need to know the script that will add it to
"Therefore it will be just a matter of adding 'sa' USERID into the following
tables in DYNAMICS database as a minimum.
Once added, use ano...A save operation on table "PM_Transaction_Work" casused a sharing
When my user post a PM batch using VPN, the connection is broken and the
batch posting is interrupted. The status is "Table Updates Interrupted".
When I try to recover the batch through Batch Rocovery, it did not allow to.
saying that" Batch NOV INVOICES" failed to complete posting. Use Batch
Recovery window to complete the posting process. " (I am at the batch
recovery window already!!!!)
When I click "more" then I see the following: "A save operation on table
'PM_Transaction_WORK' caused a sharing error."
Further invest...Table object
There is a little table object that shows up on the top left of a table that
you can use to move the table to the left or right.
But I can't seem to figure out how to get that table object to appear. You
have to click around select the whole table/ deselect the table and then at
some point it appears.
How do you get it to appear so you can move the table? I am getting tired
of trying to randomly get it to appear.
Which version of Word? We support about 20...
On 7/04/10 2:14 PM, in article O4J9ajg1KHA.4832@TK2MSFTNGP04.phx.gbl,
"tshad"...Pivot Table Freezes
I have many pivot tables off a large database and they periodically freeze
when I refresh the data. Only solution is to crash out. Any ideas, comments,
solutions out there. The machine has been checked out OK. I work on a network
- checked out OK.
Maybe this is the problem:
XL2000: PivotTable Updated Slowly with OLAP Data Source
> I have many pivot tables off a large database and they periodically freeze
> when I refresh the data. Only solution is to crash out. Any ideas, comments,
> solutions out there....Copying fields from combo box to a table
I am creating a database for our Machine Maintence Report (access 2003).
I created a combo box from table1 and I want to have the selected fields
(i.e. Machine, Technician, Engineer etc...) in table1 to be copied in table2.
This table2 has the same fields Machine, Technician, Engineer plus the other
field that will be updated when the maintenance is done such as remarks,
issue and data readings.
Looking forward for your help.
If you really have a need to store this information in multiple tables, you
can use code in the After Update event of the combo box to push the valu...Find cell numbers in a table so I can multiply
Hello, I have a word document and in the documents header there is a table.
This table a has diferent number of cells in each row like:
Row one: 2 cells
Row two: 4 cells
Row three: 2 cells
Row four: 10 cells
Row five: 2 cells
What I wanted to do is multipy 3 cells together thats in row four and show
the total in the same row. I have a number in the 3rd cell that needs * by
the number in the fith cell that needs * by the number in the seventh cell
and totaled in the 9th cell. I know I have to select the ninth cell and
select table/formula then what?
I ...Pivot Table Data Ranges
I just upgraded to excel2000, and am finding out that
keyboard shortcuts used in 97 do not exist in 2000.
Does anyone know of a KEYBOARD shortcut to modify, expand
and or create data ranges in the dialog box for entering
the range for the pivot. I have many data 'lists' which
are added to each month, and when I want to update the
corresponding pivot table, I used to simply hit "shift" +
"end" + "down arrow" to automatically go to the last
populated cell in the list. In 2000, I either have to
enter in the cell addy's manually or use the mouse...SQL to get the lowest unique value from table
I'm looking for some SQL to get the lowest unique value in a table:
3 is the lowest unique value. I would need to return the ID.
"Lee" <email@example.com> wrote in message
> I'm looking for some SQL to get the lowest unique value in a table:
> ID BID
> 1 1
> 2 1
> 3 1
> 4 2
> 5 2
> 6 2
...Table calculations. Season from Date in Hunting Harvest Database.
I am trying to set up a hunting harvest database. I would like to add a
column to the original data table that automatically calculates the hunting
season, which is based on a specific harvest timeframe. Each harvest record
entry has a specific date. For example, when a record of a deer harvested
on 12-3-2007 is entered; I want the database to calculate that the date
occurred during the fall 2007 season. Thus, I want 2007 to be automatically
entered for this record in a separate column. However, our seasons last into
the new year, so if for example a record is entered of a ...Pivot Tables show zero balance
Hi - I have a pivot table....
I want to show customers that have an outstanding balance.
when i sort by month, i see everything, totals of who paid and who ha
not. I want to sort to see only who is outstanding.
How do I do this?
Sort by page = date of invoice (by month)
Rows = client name, then the tota
Message posted from http://www.ExcelForum.com
You could add a Status column to your data source, and calculate the
account status. For example, with customer names in column C and amounts
in column H:
=IF(SUMIF($C$2:$C$39,C2,$H$2:$H$39)>0,"Outstanding&...Updating two two tables based upon the response to questions in a subform
I'm trying to populate two tables based upon the results to questions on a
I have a form and one subform. The subform has a variable number of questions
related to the form. Each question is limited to either "Pass", "Fail", or
If the user should select "Fail" on a question, I want to add a record to a
table called "tblCARs" and a record to a table called "tbl CARLineItems".
However, for every subsequent "Fail" response I want (need) to only add a
record to the table "tblCARLi...Web table to Excel...
Could someone help me exporting the tables from the following web-page
into excel ?
(use unicode encoding)
is this impossible ?
...MFC String-table in C# ?
maybe a bit OT for this newsgroup, but I know that people here use C#, too.
So, does anyone know how the MFC string-table technique map to C#/WinForm?
I initially thought about using an integer->string map in C#, but is there
some built-in mechanism to manage that?
"Giovanni Dicanio" <giovanniDOTdicanio@REMOVEMEgmail.com> ha scritto nel
> So, does anyone know how the MFC string-table technique map to C#/WinForm?
....after some web search, it seems that C# has a ResourceManager class ...Copying and Pasting Excel Tables into Word
We do our financials in Word, and copy and paste special as enhanced
metafiles the tables that we do in Excel. This works perfectly in Word 2003.
In 2007 however, when we past the table and print it, the table looks
different (letter spacing funny, not smooth). I have tried printing to five
different printers and it still happens.
I'd suggest a slightly different approach. If you insist on using enhanced
metafiles, try the following:
1. Select the range that you want to copy.
2. Instead of Copy, select the dropdown under Paste>As Picture>Copy as
3...State table lookup
I have a form for entering Customer data. When entering a new record,
I have a lookup combo box to validate the state that the user enters.
The combo box displays the state code and the state name. (ie. Ca and
California). The state code is the bound value and the state name is
the display value.
The only time I want to display the full state name is when the user
is entering data into the form. I want the state code to be displayed
on queries, forms, and reports.
Is there a way to do this ?
Thanks in advance
Create a table with 2 fields like this:
StateID Text (say...suppressing zeros in a textbox
I have a text box in a form linked to a numeric field.
Format is : # ##0;-# ##0;""
Which means the field is blank when value = zero.
Problem: when I click in the textbox, an "unwanted" zero shows up.
Does somebody knows code (or a format setting) to avoid this?
Michel Peeters wrote:
>I have a text box in a form linked to a numeric field.
>Format is : # ##0;-# ##0;""
>Which means the field is blank when value = zero.
>Problem: when I click in the textbox, an "unwanted" zero shows up.
>Does somebody knows code (or a format se...entering numbers that begin with zero
I often enter manufacturer model#'s into my spreadsheet. If they begin with
zero Excel automatically the zero. What can I do to change this?
On Sep 10, 1:15=A0pm, Shannon <Shan...@discussions.microsoft.com> wrote:
> I often enter manufacturer model#'s into my spreadsheet. =A0If they begin=
> zero Excel automatically the zero. =A0What can I do to change this?
You can format the cells to accept leading zero's. From the format
cells window, look for custom number formats, then in the Type field
0000 , with each zero representing the number of digits you w...Sizing Data Tables on a chart
When I have a data table attached to a chart and size the chart, the data
table does not size proportionately
...Problem inserting calculated pivot fields into Pivot Table (2007)
Working with Excel 2007 and a Pivot Table. Created a Calculated field. The
field shows in the Field List, but Excel will not let me drag the Calculated
field into the Pivot Table areas (other than into the Values area).
What am I doing wrong?
A calculated item or field, can ONLY be allocated to the data area.
It's position within the data area can be modified, but it cannot be
moved to any other area
> Working with Excel 2007 and a Pivot Table. Created a Calculated field. The
> field shows in the Field List, b...Inserting New rows into IV00108 Table
I am trying to insert new rows of data into the Iv0018 table I have another
table in SQL with tthe data but when i use DTS to append this data it will
not let me because of a null value being inserted in the DEX_row_Id column.
Is there a SQL script that will allow me to apend this data to this table
since the part numbers already exisits this is another pricelevel i am
adding. This is SQL 2000 and GP 9.0.
DEX_ROW_ID is an identity column so it will auto populate.
In DTS do not map a value for DEx_Row_ID (ignore it)