add a data label
How do i add a data label for my y-axis on a line graph created in word?
I presume the Word chart has been created with MS Chart? If so Double-click
to activate the edit mode for the chart, then choose Chart, Chart Options,
If the chart is an Excel Object then you use the same steps.
> How do i add a data label for my y-axis on a line graph created in word?
...Data Validation using List (But needs unique list in drop down lis
In sheet 1, column A is my title name while column B is person name.
Sheet 1 is my database where i do data entry in this.
In sheet 2, contains my query page. In cell A5, i uses data validation -
list, on this cell. Say in sheet 1 :
column A column B
XXXXXXX Mr A
YYYYYYYY Mr A
ZZZZZZZZ Mr A
AAAAAAA Mr B
WWWWW Mr C
DDDDDDD Mr C
But In sheet 2, cell A5, I saw in the drop down list as follows:
But i want to see this in cell A5 instead (Unique name that is) :
I have a macro set up to submit data from an entry point on one worksheet
into a database on the other. Basically, I enter the info on the first
worksheet, hit submit, and it transfers it to the second worksheet. My
question is, how do i make it skip to the next line on the second worksheet
so that it logs all the submits rather then overwriting the previous?
This will get you to the cell just below the last populated cell of column A:
(You could get this row into a ...Conditional format that higlights differing data on two worksheets
I have a workbook that contains a worksheet for a single week of any
given month and in the sheet I have an individual's time reported for
each day of the week. I have a second workbook that contains an
individual's time reported by each day for the entire month. I would
like to compare the two to determine if there is a mismatch and
highlight those cells.
The logic goes something like this:
(1) I need to match person A in column C of workbook1 to the same name
in column C in workbook2.
(2) I then need to match the date of the month on workbook 1 & 2 for
person A in step #1.
(3)...Skip blank or N/A in data analysis
I try to do data analysis (such as regression) to two
data columns X ~ Y. Under some condition, some of the Y
values are blank or (#N/A). When I do X-Y chart, those
points are ignored. However, when I select the same
columns to do regress or any other data analysis, I got
the error saying "Input range containing non-numeric
data". I don't want to put any number like 0 for those to
distort my result. I just want to ignore or skip those
N/A data. Is there a way I can do it without removing
those data? Because the N/A location depends on a
variable (a condition). I ...Cell selection
Can anyone tell me why, when I select a cell near the bottom of a page, 3-4
rows seem to be sected as well?
Thanks in advance
You are probably in Extend mode. Look at the bottom right of the Status
Bar, look for Extend, its location and wording depend on version. If it is
on press Esc or F8.
If this helps, please click the Yes button
> Can anyone tell me why, when I select a cell near the bottom of a page, 3-4
> rows seem to be sected as well?
> Thanks in advance
I am having this p...Migrating data from ACT to CRM (how to get at act! data)
I intend on using the DMF to migrate data to CRM. The question I have
is how do I get at the underlying database that ACT uses. I see the MS
excel file for ACT has table and field mappings but I need to do some
specialized SQL. I can't seem to figure out though how to get into the
SQL database where the ACT information is stored. How do I log into
From my days working with ACT, I thought the databse was built around
Microsoft Access. If indeed the databas is SQL then you should be able to
get your SQL DBA to grant you access to the SQL Database.
Rgds...Data Analysis Plus Add-In
My Data Analysis Plus add-in has disappeared. I had it
installed at one time, but now it is gone. I've
attempted to reinstall the add-in several times and
rebooted each time, but to no avail. Running XP Pro and
Office Pro software. Any ideas?
You probably have done this but .... have you looked at Tools/Addins .
there is a Browse button in case Excel cannot find it
~~ Message posted from http://www.ExcelTip.com
~~View and post usenet messages directly from http://www.ExcelForum.com
...How do you replace old data with new data without creating a new .
I have existing pivot tables and I want to replace the data source worksheet
with new data and the pivot tables update with the new information. I have
replace the data source but the pivot tables didn't update.
Hit the "Refresh Data" in the pivot table toolbar (looks like an exclamation
> I have existing pivot tables and I want to replace the data source worksheet
> with new data and the pivot tables update with the new information. I have
> replace the data source but the pivot tables didn't update.
So...Move Data From Vertical to Horizontal
How do I get my speadsheet to move from vertical meaning:
Name Type Hours
Bob Regular 80.00
Bob OT 10.00
To look like this:
Name Regular OT
Bob 80.00 10.00
If anyone can help PLEASE comment.
~~ Message posted from http://www.ExcelTip.com/
~~ View and post usenet messages directly from http://www.ExcelForum.com/
You can create a pivot table to summarize the data. There are some
instructions and links here:
For ...publisher: 4 Millions Domains data with Category
Successfull Internet and Direct Marketing products on
* NEW * DOMUS Domains Toolkit Fall 2004 - Unique on the Net
4 Millions "Whois" Domains data with Expiration Date and Category*.
Ultimate Version (October 2004) - Our best rate starts from US *$149*.
A wonderful tool for Internet and Direct Marketing.
Available in Basic, Advanced and Full Editions.
It contains a domain database with 4 millions *FRESH* October 2004
New records .com, .net, .org.
4 Gigabytes MS Excel data zipped on CD-Roms/Dvd. Compression 3:1.
MS Excel or Text tab del...Exporting global data from a DLL to an EXE
I have a "Win32 Application" and I must use some global data defined(and
initialized) in a DLL linked to the Application.
As suggested by MSDN,I have exported this global data from the DLL in this
- In the DLL, I have used the keyword DLLEXPORT
- In the EXE I have used the keyword DLLIMPORT
But when I run the EXE the application crashes!
The problem is that, in the EXE, the imported global data are all equal to
zero and the application doesn't see the initializationsdone in the DLL!
Does someone know where is the problem?
Thanks to All.
I don...How do you import data from one Excel document to another?
I work at a school and I'm trying to update their attendance reports from
hand written to excel, but I'm running into several problems. For one, I need
it to be able to calculate how many "Ab"s (absents) there are in the
worksheet (for the individual student's attendance page). And THEN, I need to
have the sum show up on a completely new document (for the overall attendance
report). Is that possible? I've fooled around with data importing and several
other things, but I'm just too new at this. If what I'm asking is possible,
can anyone he...Copy & Paste Data from Web into Excel
When I do the above & use Vlookup for numerical data the
numeric data is not recognised, although some data are in
another excel workbook. How can I sort the data from the
web so that I can do a proper vlookup
What looks like a numeric field is actually text.
This trick often works:
In an empty cell enter the value 1 and copy it
Select the offending numbers and use Edit/Paste Special->multiply
Delete the cell with the 1
remove CAPS in e-mail address
"Kelvin Pakaree" <firstname.lastname@example.org> wrote in mes...pie-charting non-numeric data
I would like to chart and graph responses to a survey that are non-numeric in
nature, such as a bar graph for "yes" and no" responses to a question. Or in
particular a pie chart that shows how many people picked option "P" vs. "K",
"J" or "N". For the pie chart I have a column of data cells, each containing
one of the four letters.
In short, how do I accomplish charting and/or graphing non-numeric responses?
So you have a column of Yes/No or P/K or J/N? Construct a pivot table of this range,
and you can produce counts of each value...Exract Data And Error Msg
Microsoft Excel cannot determine which row in your list or selection contains column labels which are required for this operation
I can’t figure out why:
The names of my Columns are as follows:
ITEM QTY DAYS TOTAL
I formatted them as Text. How do I make Excel know they are column labels and furthermore…
I am composing an invoice for my rental business. I have set up a sheet with all the items that I rent. The cost of each item is determined by the number of items time the number of days rented. I would like to extract, to a separate location,(sheet 2) only the items that we...Data Entry
I know that you can go to tools/options/edit to change the next cell after
you enter. I would like to go across the row instead of down the column.
Is there any way to make that selection just for a workbook, .
The change seems to be global until you change the preference again.
one way is to add this code in your sheet code
Private Sub Worksheet_Change(ByVal Target As Range)
play with it.
> I know that you can go to tools/options/edit to change the next cell after
> you enter. I would like to ...Import data from Money 2002 to Excel
I'd like to import some transactions history from Money
2002 into Excel. Does anybody know how I can do this?
In microsoft.public.money, Nick wrote:
>I'd like to import some transactions history from Money
>2002 into Excel. Does anybody know how I can do this?
Prepare a report in Money and right-click into it. You can copy and
paste or choose Export....
For more sophisticated information access, search Google for
...trouble changing data type
I am running MS Access 2007 on Windows XP Professional 2002 (SP2).
I need to change the data type of a single field in a table containing just
over 1.4M records in order to link it with another table and run a Make-Table
Query, but Access is telling me I do not have enough memory to change the
data type. I have 1GB of RAM and a Pentium 4, 2.79 GHz processor. Am I out
of luck based on the equiptment I am working with, or is there a way around
First backup your database. Next Compact and Repair.
Third add the new field datatype. C...data labels disappear from graph when i close the worksheet
I have added datalabels to a bar graph. But they go away when i close the
worksheet despite having saved the changes. Could any one elt me know why
this is happening?
...addressing envelope from data input form
I don't know where to start to try this.
I have the following fields that make up the entire address:
Fname2 Lname 2
City, State Zip
Is there any way to "push a button" on a form and have it print an envelope
for that record?
Thanks in advance for any help.
Posted via a free Usenet account from http://www.teranews.com
Have you thought of using an MS template as a starting point?
Dave Eliot wrote:
>I don't know where to start to try this.
>I have the following fields ...Time entered (and handled as data) in simple minutes and seconds.
Using Excel 2003.
How can I get Excel to display and handle entries for duration in minutes
and seconds only (without having to enter a 4'30" entry as 0:04:30)? I have
gotten as far as getting it to display as "04:30.0", but all I need is
single digit minutes (data on this spreadsheet will never go over 9:59) and
double digit seconds (and to be able to enter them simply as in "4:30"). I
couldn't find that as an option in the ones listed for time in the cell
format dialogue box. Right now I have to enter 0:04:30 in order to get it
to work right. Is t...Changing font size in data validation drop-down lists
In Excel 2003, I created the value list on a separate worksheet and labled
the range so I could use it in the data validation wizard on a different
The list is working fine; however, the font size in the drop-down list is
too small to comfortably read.
So far, I have tried:
Making the font in the list larger.
Formatting larger font size in the active cell with the drop-down button
And, creating the list on the same worksheet.
All three remedies have not increased the size of the font in the drop-down
Suggestions are welcome.
There is n...Filtering data by custom fields in pivot tables from Visual Report
I have recently upgraded to MS Project 2007 and like the visual reporting
feature, except I really need to filter and group the resulting pivot table
in Excel by custom fields. For example, for task usage, I cannot filter my
pivot table to show only the tasks that have costs > $0, thus my table ends
up showing too many lines and a lot of 0's. I would also like to group by
department/ function which I put in a custom text field. How do I do this?
I saw related posts about saving the file as an Access database and then
creating the pivot table by connecting to the datab...Combining Pivot Tables
I have a data set of around 100,000 rows which I have imported into
excel in two sheets (~50,000 rows each).
The data is not in a format that excel can easily parse into a pivot
table directly from the source - it requires some formulae in excel to
be able to use a pivot table.
I have used a pivot table on each of those sheets to summarise the
data, and that works fine.
However, I would like to be able to get a single summary pivot table
from the two sheets (or from the two pivot tables).
Is that possible, and if so, how do I go about it?