I have one column with increasing standard time (hr:min:sec). I put a formula in the first cell of the first row of a second column to convert the same cell of the first column to a value of decimel based upon minutes. The result is correct in the first cell of the first line (row) where the the formula was placed in the second column, but when I copy the formula throughout the rows of the second column, the results shown are always the answer for the first line - even though when I klick on the cell the formula in the lower rows/cells shows it referring to the correct later time ...

What a pain in the neck to come back home after being away and not being able to access the newsgroups via my newsreader (http:// www.gmayor.com/MSNews.htm). Anyway ... <g> I have this formula in cell A16: ="Don't take today: " &+A15+1 I got it from googling for text and formulas in same cell. I've tried formatting cell as general and text but nothing comes out right. The result in A16 should say: Don't take today: Tue.Sep.14.2010 but instead it says: Don't take today: 40435 Can anyone advise how to fix this? Thanks! :oD On Mon, 30 Aug 2010 ...

Hello...I'm stumped.... I am entering a simple formula: =RIGHT(A2,2) in a cell. The sheet has data on it but not a whole lot going on. I have tried formatting the cell itself, the column, and the entire sheet a number of ways...however, the formula appears in the cell as =RIGHT(A2,2)...as if were a text entry...it won't actually just turn into a formula and do it's thing. Thanks in advance for response.... -- couriced ------------------------------------------------------------------------ couriced's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=...

This is probaby very simple, but I really don't know a lot aout formulars. When I have created formulas to work out the percentage of each sales type that we have, I then need to use this % as a part of another formula, Ie Sales type A is 50% of our overall sales "=sum(B1/B3)*100", I am am then trying use this 50% to apportion our wages bill to a sales type. When I create another formula "=sum(B10/B13)*the cell reference of the formula I previously calculated" it is throwing out the incorrect answer. Can anyone give me a simple answer to a very simple question a...

How can I get Excel to emulate Lotus 123 commands such as: print range, + - (formula) range, move information and calulatons. ...

Hi, guyz i know you can drag the formula accross the rows in that column t have that formula in effect in every cell. but i have some data lik 5000 rows then how to get that formula accross each cell, its painfu holding the mouse and dragging the formula accross the rows. please advise thanks in advance sorab -- Message posted from http://www.ExcelForum.com Hi after inserting this formula in the first row double click on the lower right corner of your cell selection -- Regards Frank Kabel Frankfurt, Germany > Hi, > guyz i know you can drag the formula accross the rows in that col...

Excel is one of the most spectacular apps ever created. But one feature I really need is mixed formatting of a string whose cell is a formula. By mixed formatting I mean, you know, making selected (as opposed to all) character(s) of the string bold, italic, a different color, sub- or superscripted, etc. In Excel 2002 you cannot do that in a formula cell (right?). In edit mode, the user would, say, press F9 to display the calc'ed string, selectively format it as usual, then cancel edit. Excel would save the formatting as a separate mask. What could be easier? The user would ...

Hi All, I know this is the wrong group, but there are so many sharp helpful experts here that I can't resist, sorry. Please direct me to the proper resources. About 3 days ago I lost the use of several hardware items. I have Vista Ult 32. Using "System Information" "System Summary" "Components" "Problem Devices", I get the following: _________________________________________________________________________________ SSTcorp CD/DVDW TS-H653L IDE\CDROMTSSTCORP_CD/DVDW_TS-H653L_______________0514____ \4&D4CB429&0&0.2.0 Fail...

I have a cell with a simple currency formula in it. I want to add a specific dollar amount to the formula result IF a single value from a group of 5 values appears in another cell. -- Thank you. John Q. Without more details, maybe something like: =A1+IF(OR(B1={"a","b","c","d","e"}),22,0) John Q wrote: > > I have a cell with a simple currency formula in it. I want to add a specific > dollar amount to the formula result IF a single value from a group of 5 > values appears in another cell. > -- > Thank you. John Q. -...

Hallo I use the Exchangeserver from the MS SB Server 2000 with outlook 2002 clients. No client is able to delegate tasks. Always appears the errormessage: You are not allowed to delegate tasks. Can somebody tell me, where I can define the rights to delegate tasks in MS Exchange Than Alex ...

I have two Windows XP professional computers on a microsoft peer network. If I access the network from a laptop whilst logged on to a user which doesn't exist on the PCs then I get a different result: - one PC asks me to logon - the other shows the folders on the shared drives but does not allow access to those folders I would like to change the second PC to request a logon. Anybody know how to do this? thanks DAvy "Davy" <me@removeallthistextchobham.org.uk> wrote in message news:Xns9D77B5D3BA014meremoveallthistextc@216.196.109.145... > I have...

Does anyone have a formula set up scorekeeping in Excel for the game Rummikub. We have tournaments and want to use the computer to keep track of scores, with minus scores added to the winners' scores. Thanks DocT ...

Hi, I have a spreadsheet Expense Journal designed for entering expenses in two currencies, one for Dollar and one for a local currency. It has two sections of rows, the top is for Dollar Expenses and uses no exchange figures because the spreadsheet converts everything to Dollars. This Dollar section has five columns: Date Project # Account # Description Dollar Amount In the blank spreadsheet that they start anew each quarter, there are only two rows setup for Dollar expenses because most of their expenses will be in Local currency. Below the Dollar secti...

if i want a cell reference to not increment when filling i put a dollar sign in front of it i noticed this does not work when you specify a range of cells eg ) $A1:$A20 although it is not an error when i fill in a formula it still increments the cell reference in each row but if i specify a single cell it does not. does anyone know the syntax for this, it's hard to word so i havent been able to find anything on google. thanks for your help! cheers, /sh You mean like this: =SUM($A$1:$A$20) ? -- HTH, RD --------------------------------------------------------------------------- P...

Hi guys, Need some help with a formula please. Have tried myself and know that the answer is straightforward but going through a mental block! Col Q Col R A01 58 A01 62 P02 62 Both columns data starts in cell 14 and runs down to cell 10000. I need to count the entries in Column Q that = A01 ONLY IF Col R = 62. Then do the same for Q = A01 ONLY IF R = 58, and so on. The worksheet is a year-to-date file and will be updated weekly with many entries in both columns with varying values. Many thanks. Hi, =SUMPRODUCT((Q1:Q10000="A01")*(R1:R1000...

Hi all, Does anyone have an idea how I delete a task request from my inbox. When I try to delete the task request i get the outlook dialog box up, which states. "The task folder could not be found. Could not open the item. Try again." Any help with this would be appreciated. Thanks in advance. ...

Hi CRM Pros I have a prospective 3.0 customer. Basically they have a not too complex Excel sheet, that they would like to replace with CRM functionalty instead, in order to run it offline with automatic sync to the CRM server. I know that I can customize CRM 3.0 with extra fields on the oppertunity entity and with custom exchange rate and freight rate tables. But what are the possibilities in 3.0 of creating calculations to run automatically, e.g., tallying the sum of some of the custom fields, or for multiplying some of them together with the exhange rate from a separate table? These calcula...

I am trying to do a set of 3 counts between 1-100. Under 80 Between 80-90 and 90+. I have 2 formulas that are working and can't seem to figure the 3rd, could anyone help? 1st =COUNTIF(G4:K22,">89.99") 2nd =COUNTIF (G4:K22,"<79.99") It is the middle one that I am not able to figure out. count all -those two or =sumproduct((g4:k22>=80)*(f4:k22<90)) -- Don Guillett SalesAid Software donaldb@281.com "Barb" <anonymous@discussions.microsoft.com> wrote in message news:045801c3d85f$f193bdb0$a401280a@phx.gbl... > I am trying to do a set of...

Hi, I have my data set up the following way - the columns refer to th month and the rows are the different projects I'm tracking. Projec "A" has data in months Jan-Oct (10 values), while Project "B" has dat in months Jan, March, July, August & Sept (5 values)-the missing month are blank. Is there a way get the average of the last 4 values fo each project? Maybe using a count function? thank -- Message posted from http://www.ExcelForum.com Hi if your values are in A1:J1 use the following array formula (entered with CTRL+SHIFT+ENTER) =AVERAGE(OFFSET(J1,0,0,1,-...

In this small office I set up common resources/rooms as calendars in public folders. Users are Authors by default. When a User creates a meeting request in one of these calendars, and another User opens the item, it gets automatically added to that User's personal Calendar, even if they are not an invitee, even if they close it immediately without accept/decline/tentative. I realize this is probably expected behavior. I tried turning off "Process requests and responses" but it still happens. Is there any way of preventing this from happening, especially without impactin...

i am trying to do this:: =IF(J48<25,"",K48) just insert the info from I48 into K48 BUT =IF(J48>25) then add J48 info to I48 and place the total in K48. is this possible and how is it done =if(j48<25,"",if(j48>25,j48+i48)) -- y_not ------------------------------------------------------------------------ y_not's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=19947 View this thread: http://www.excelforum.com/showthread.php?threadid=394739 A formula can only enter values into the cell in which it resides, it cannot enter data int...

hi i am trying to check if a time value is greater that 2am and smaller than 2.30 am if it is put 1:59:30 in the cell if it the time value is smaller or bigger put cel value into cell i am using the formula below =IF(AND(C73>="02:00:00",C73<="02:30:00"),"01:59:30",C73) i am checking the formula with 02:01:00 (should put 1:59:30 ) actuall puts 02:01:00 i am checking the formula with 01:01:29(should put 01:01:29) actuall puts 01:01:29 but i can't get it working correctly any ideas thanks kevin By enclosing those times within quotes you are conve...

I am using an =Ave function in a formula to average quite a few cell values together. I add new information all the time; sometimes 5 or 6 new cells at a time. How can I append or up-date my formula to include these new cells with out have to type the new cells into the formula? When I make the cell that has the formula in it active/edit, all of the cells that are referenced in the formula have a highlight around them. Is there a key or key combination I can press while clicking on the cells I want to add to the formula? Thanks, john Hi see your post in Excel.misc -- Regards Frank ...

If I have several sheets, each with data for a particular year, how can I copy a chart from 1 year to all the others, making sure the data references are to the respective year? Duplicate the sheet that has the chart, then replace the data on the copied sheet. - Jon ------- Jon Peltier Peltier Technical Services, Inc. http://peltiertech.com/ On 3/23/2010 9:29 PM, Bobhoe wrote: > If I have several sheets, each with data for a particular year, how can I > copy a chart from 1 year to all the others, making sure the data references > are to the respective year? ...

I am trying to compare two cells to eachother and populate a third cell with the number that is the GREATER of the two. (IF f26 is greater than G34, populate m22 with value in f26; BUT if g34 is greater than f26, populate m22 with value in g34). Any suggestions? On Jan 13, 10:17=A0am, CrazyConfused <CrazyConfu...@discussions.microsoft.com> wrote: > I am trying to compare two cells to eachother and populate a third cell w= ith > the number that is the GREATER of the two. =A0(IF f26 is greater than G34= , > populate m22 with value in f26; BUT if g34 is greater than...