Merging Two Office Data Files
This is a multi-part message in MIME format.
Here is the situation:
I've a desktop and a laptop. Before I bought the laptop I was using MS =
Outlook on my desktop. Now that I'm using my laptop mostly, I would like =
to have my old emails from my desktop Outlook merged with the laptop =
Outlook emails. I don't want to replace the laptop outlook files with =
the desktop outlook files is the folder - C:\Documents and =
Settings\Laptop\Lo...Linking files 2 ways
I have a work book that is linked to another and vise versa.
Workbook A is where the input of data is made;
Workbook B has a link to the input from workbook A;
Workbook A retrieves the altered data back as a link.
Although this all works fine with both books open, I note that if I open
workbook A by itself, that the data it retrieves from Workbook B is not
updated . If However, both books are open, there's no problem. I thought
linked books were updated automatically if the Update remote references has
been selected?? But it appears that the second book is not updated until it
...OL2007 not move big files from outbox to sent
We have 2 computers with separate email accounts on Roadrunner. One machine
has XP with Outlook 2002-sp3 and works without any problems. The other has
Outlook 2007 on Vista and has problems sending files over a meg or so in
size. It seems to actually send the file but the file remains in the
outbox folder and does not move it to the sent folder. I say it "seems" to
send the file because some people complain of getting muliple copies and
others don't seem to get them at all. If I hit send again (not set up for
auto send) it seems to send the file again (why some ...AD Sync problem
One of my DC was disconnected from the network for quite a long time and
cannot be synchronized with AD anymore.
I have been trying to apply the http://support.microsoft.com/kb/325850/en-us
procedure to reset the machine account password.
After launching the command "netdom resetpwd /S: ....." I've got the
following error message :
"The machine account password for the local machine could not be reset.
Echec d'ouverture de session : unknown user or incorrect password. The
command failed to complete successfully."
ANy idea to help me ?
Man...Excel button problem
I have a macro that copies a worksheet in the active workbook and puts it
into a new workbook - then formats it and deletes any buttons on the
On the first click on the button the macro works ok.
On the second click, it fails because the all assigned macros on all buttons
in the active workbook changed from "mba" to "book1!mba". Book 1 doesn't
exists (wasn't opened, wasn't saved, doesn't have the macros).
I've never experienced this problem before??
Can anyone help to solve this problem?
The macro to do this is c...Excel 97 #9
Please can anyone help???
I have two columns in Excel 97. The first contains a list of statu
values eg. pending, or granted or withdrawn. The second contains date
eg.01/12/1997, 05/06/2003. I woudl like to know how to get all th
granted apps before 31/12/2003. Can anyone help please
Message posted from http://www.ExcelForum.com
theres many ways, but an easiest way would be to do a
sort. Highlight the 2 columns, click on data, then sort,
then sort by status, then by date. this should group them
all together. hope this helps...toe
>Please can anyo...Using Relative path for XML data file?
Is there a way to specify a relative path to an XML data file imported into
Excel 2003? I am writing a web app that generates report data as XML for the
user to download to their local machine. This data is to be consumed by an
Excel reporting spreadsheet, which contains display-formatted tables and
charts that are mapped to various data fields in an XML Map, which is in turn
linked to the xml data file they will download.
The idea is the user only needs to download the data for updates, not the
whole spreadsheet. However, since I cannot predict the path where the user
will store their...How to repair a .dll file in IE8
Several days ago I noticed in my Dependency Walker that the IESHIMS.dll files
has a yellow circle with a question mark on it. What does this mean and How
do I repair it?
OS: Windows Vista Home Premium
Browser Internet Explorer 8
See the History tab on that dialog.
A web search for ieshims.dll files will also help you find a solution for
"TW" <TW@discussions.microsoft.com> wrote in message
> Several days ago I noticed in my Dependency Walker that the IESHIMS....unsolicited entry in the folder "Temporary Internet Files"
I am working on a programme which browses web sites and runs under XP.
The http download is as follows:
pServer = Isession -> GetHttpConnection(strServerName, nPort);
pFile = pServer->OpenRequest(CHttpConnection::HTTP_VERB_GET,
strObject, NULL, 1, NULL, NULL, dwHttpRequestFlags);
if(dwStatusCode == 200)
pFile -> QueryInfo(HTTP_QUERY_LAST_MODIFIED, &sysT);
status.lastMod = sysT;
if(DBlastMod == status.lastMod) //URL content has not changed
since the last visit
...New to excel
I'm new to Excel ( and to this forum :) ) and so I hope somebody may b
able to help me.
I've got 2 questions....
I've got a spreadsheet which takes data from one worksheet and uses i
to calculate data in a second worksheet using the following code
=IF('4th November 2005'!B19="","nothing here dude",IF(B19<'4th Novembe
2005'!B19,"UP",IF(B19='4th November 2005'!B19,"Same",IF(B19>'4t
The problem is, when I create a new worksheet I have...Looking for Excel Help
I'm a very novice Excel user and am looking for a little help with
creating a formula for a spreadsheet I'm creating for
my personal use. I would appreciate some
assistance if possible. Thanks in advance.
Message posted from http://www.ExcelForum.com/
Post a sample of what you want to do.
Your question is just a tad open ended <g>
Norman Harker MVP (Excel)
Excel and Word Function Lists (Classifications, Syntax and Arguments)
available free to good homes.
"DanB4105" <DanB4105.ywtpa@excelfor...Maximum file sizes
Is there a recommended maximum file size for Excel 2000.
PC spec 2Ghz P4 with 256 Mb
Any advice appreciated
Does Not Exist
have a look at
"Deus DNE" <firstname.lastname@example.org> schrieb im Newsbeitrag
> Is there a recommended maximum file size for Excel 2000.
> PC spec 2Ghz P4 with 256 Mb
> Any advice appreciated
> Does Not Exist
...find action on log file
I want to use outside tool to find who made some update on table in my
I know that there are many tools for this. But can they do it on simple
Roy Goldhammer (email@example.com) writes:
> I want to use outside tool to find who made some update on table in my
> I know that there are many tools for this. But can they do it on simple
> recovery model?
No. If you are using the simple recovery model, the contents of the
log is wasted away everyonce in a while.
Well, if the disk area has not been overwritten...File size #11
I have read the other discussions on file sizes but they do not seem to
address my problem.
I have an Excel file that is 12mb large with low-res jpegs in it. This file
also has merged cells to make it look pretty. Does Excel look at these merged
cells as graphics? Is this why they are too big? I have run a macro to make
sure that it goes to the last cell.
How can I get the file smaller?
How big are the graphics? If you remove them from the file, what is the size
of the file and what is the size of the graphic files?
To be sure you do not have extra formatting, if you open the file...Excel corrupts when asking to update vlookups
We are experiencing weird behavior with some Office 2K3 Excel spreadsheets
that contain lots of calculations, but no macros. On some pc’s Excel acts
normally, on others you get the error. I have a couple of screen shots
Any help is appreciated.
If desired, send your file to my address below. I will only look if:
1. You send a copy of this message on an inserted sheet
2. You give me the newsgroup and the subject line
3. You send a clear explanation of what you want
4. You send before/after examples and expected results.
Don Gu...Uninstall of mappoint has caused errors with excel
I am running Office 2003 on the terminal server (windows 2003) and had a
copy of mappoint as well. This is a mapping program. We ininstalled
mappoint which has caused an error message with Excel and other office
products. The error says "Cd:\documents and
settings\administrator.ocrdc1\application data\microsoft\addins c:\Program
files\common files\microsoft shared\geography\mpoai9.dll is not a valid
add-in." I then click OK and excel opens up and everything is fine. The
problem is that we are using other programs as well such as Quickbooks that
export to excel and t...CSV Files and VLOOKUP error
Does anyone know why VLOOKUP and Compare formulas don't work o
information originating from a CSV file? I've tried copying an
pasting values only (to leave behind any formatting), but it doesn'
Through countless tests, I've narrowed it down to the CSV file bein
the only possible cause
Message posted from http://www.ExcelForum.com
Just a guess but the imported data may have leading or trailing spaces or
are numbers stored as text. You could use the formula =A1=D1 to see if you
get a true or false, where A1 is the lookup value and D1 ia the CVS valu...learning Excel #3
I was considering learning Excel as an additional tool for my data analysis
Is it better to use data sets that I have previously used with SPSS and
apply the same analysis tools as in SPSS? For applying the appropriate
tools, I was considering using excel's online help.
The second option I have is to use some excel book for data analysis and
apply the techniques to data sets provided with the book.
...unable to paste Excel 2003 chart into Outlook 2003
(This was posted on "excel.charting" group.)
I have a user who's unable to paste an Excel 2003 chart into Outlook 2003
email message. In Outlook options, the checkbox is selected for "Use
Microsoft Office Word 2003 to edit e-mail messages".
When I tested this on my own computer running the same version of Office, if
the box is check, I have no problem pasting; if this box is cleared, I
cannot paste. But on his computer, it doesn't work regardless.
Thanks and regards,
...How do I Remove a Split from my Comments in Excel 2003? #2
I have set my current workbook to split/freeze the first column and first 2
rows. Now, when I add a comment to the second row (in any column) my comments
are cut off if I should scroll down.
I don't ever remember the behavior before. And I don't know what I've done
to enable it but it's really annoying.
How do turn this off ?
...How to automate increasing the form cache registry/file etc...
I want to roll out a batch file to make a number of tweaks to CRM
The body of it would go
REGEDIT /S Kerberosefix.reg
REGEDIT /S ForceFormreload.reg
REGEDIT /S OutlookFix.reg
It would also rename OSA.exe to OSA.bad
Remove OSA.exe From the startup menu
I need help finding a way to use my batch file to increase the Outlook
Form cache from the default 4MB to 50 MB.. This makes CRm more stable
and faster for communications. I dont want to manually do this, as it
time consuming, are my end users would not be reliable in doing it
I also want to make another batch file or button that...Business Portal should allow requisition to be added to issued PO
The printing of a PO changes the status of the PO from New to Released
(signifying the release of the PO to the vendor). Once a PO has been
released, it will not show as a PO you can add items to from business portal.
The current design of the product only allows you to add to POs with a status
of New. Adding an item to a Released PO should trigger a change order.
This post is a suggestion for Microsoft, and Microsoft responds to the
suggestions with the most votes. To vote for this suggestion, click the "I
Agree" button in the message pane. If you do not ...I need to print a word in PDF from excel.
In my excel Macro, I update several values and then open a word linked
with that excel. Finally what I need to do is to print that word to
PDF. I already have a PDF Printer, so I just need the code to do it.
Can anybody help me?
Thanks in advance.
Habilita la impresora predeterminada como la PDF y ya lo puedes imprimir a
al formato deseado
Tienes alg=FAn codigo para ello?
Desde el panel de impresoras asigno primero la que me interesa y despues
ejecuto mi macro desde el archivo excel asignando la instruccion sig:
midefaultes = a...How do I get Excell to sort dates that range from 1800 to 1900's
I have posted a cemetery survey on Excell spreadsheet. When I try to sort
the birth dates or death dates in ascending or descending order the range of
1900 dates will sort but the 1800 dates fall after the 1900 and will not
sort. Why? Is this inherit with this program?
The WinXL default dates start with 31 December 1899, so earlier "dates"
are interpreted as Text.
You can use helper columns and text functions (LEFT(),RIGHT(),MID()) to
put the Year, Month and Day in separate columns, then sort.
Take a look here for additional workarounds:
http://j-walk.com/ss/excel/files...q Emailing Excel Sheet With Outlook
I am trying to send a table from Excel within the body of an Outlook
(lastest versions) to be sent as a fax. Am able to do this, BUT when
the document prints out on the fax machine the formating is off (too
big for the sheet). I am flexible on changing the method I send it to
the fax machine, however it must be sent to the fax via macro. Below
is the code I am using.
Any help would be greatly appreciated.
Public Sub DoIt()
'On Error GoTo Handler
Dim EmailAddress(0 To 2) As String
Dim Count As Integer
Dim N As Integer
Dim sRec1(0) As String
Dim sRec2(0 To 1) As...