Looking for an excel function which can mirror opposite the data
There are 2 data sets is assumed running in A1 down, viz.:
From A1 down to A10, are showing a set of number: from 1 to 10
In the cell from B1 to B10, are showing from 10 to 1, which is decreasing
from 10 to 1.
My question: I want to know is there any excel formula which I can place in
B1 and pick A10's number; B2 pick A9's number and etc.
I know there is an easy way to do it, just type "=A10" in the cell of B1, but
it is quite difficult to do it when I have more than 200 number, e.g. A1 to
Thanks for your advice,
Message posted via OfficeKB...On-line services set up failed with "new & improved" Money update
Money 2005 Premium: with the mid-August unannounced update by Microsoft, I
lost my ability to go on-line. I reviewed the instructions inside Money and
tried to re-set the on-line service but I'm now in a loop that doesn't seem
to have any way to back out of it or to move forward successfully.
Instead of disabling the account first, which is listed in the long, weary
icon version of the update instructions, I went to set up online services and
now have the message "complete setup for online services" which apparently
will not work because I consistently get a message ...How to make Access 2007 Navigation pane invisible?
I have tried the Access Options. | Current Database | Navigation, uncheck
Display Navigation Pane, and the vertical "Navigation Pane" still displays
in a compiled .ade.
Something else yet?
"Dean Slindee" <firstname.lastname@example.org> wrote in message
>I have tried the Access Options. | Current Database | Navigation, uncheck
>Display Navigation Pane, and the vertical "Navigation Pane" still displays
>in a compiled .ade.
> Something else yet?
> Dean Slinde...Analysis Cubes
What are the minimum requirements for using the Excel Addin for Analysis
Cubes? Do you need to have GP installed to use the Excel AddIn? I have some
users that need to access GP data, but I donot want to have to install GP on
their Workstations, how do I do this? I am using GP version 8.0.
See below for the requirements:
1. Supported Operating Systems: Windows 2000 Server; Windows 2000 Service
Pack 2; Windows 2000 Service Pack 3; Windows 2000 Service Pack 4; Windows
Server 2003; Windows XP; Windows XP Service Pack 1
2. To use the add-in with Analysis Services 2005, the following compone...Writing to word 2007
I have a 2003 access database that writes data to text fields in a 2003 word
document, no problems,
I have now upgraded the database to 2007, and the same code although it
appears to run ok, does not actually update the word document fields, i also
tried converting the word document from 2003 to 2007. I data transfer using
code from within access
So no error message; it just doesn't seem top update, right. See this:
I do it with docvariables. Are you using docvariables? If so, read this:
http://w...Outlook 2007: "Cannot save free/busy information"
I have been getting the error message "Cannot save free/busy information"
from Outlook frequently these days. It started when we changed our
configuration from connecting to an Exchange server on the LAN to using a
proxy Exchange server that forwards (I imagine) to another Exchange server
on a different LAN.
I have my profile configured to deliver to a local PST file.
It seems that Outlook does successfully update free/busy info on the server
sometimes; the error message appears fairly randomly - e.g. sometimes when I
delete a meeting request, but not every time.
How do I prevent 2 files from opening up when I click on one file?
What two files are opening?
If it looks like:
Then you actually only have one workbook open--but you have two windows to that
single workbook opening.
Click on the window you don't want anymore and hit ctrl-w to close that window.
Then save the workbook.
If that's not it, maybe you have another workbook in a folder named XLStart.
Use windows start button and search for XLStart.
Then look in each of those folders for a workbook file (*.xls). Move it or
delete it if you'r...Cannot open Money Deluxe 2007
New laptop, successfully using Money, then now I cannot open it. Windows
keeps shutting it down. Tried running as admin. Tried uninstalling, then
In microsoft.public.money, Karen wrote:
>New laptop, successfully using Money, then now I cannot open it. Windows
>keeps shutting it down. Tried running as admin. Tried uninstalling, then
What OS? Is there an error message?
Were you successfully using Money on that new laptop? Did the
problem occur recently? You might want to consider a system restore
point from before the pr...Number of wsheets in an excel workbook???
hey guys, how many wsheets does one excel workbook have? I need to have
about 66 - is that possible?
mariasa's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=31726
View this thread: http://www.excelforum.com/showthread.php?threadid=521656
I have created a workbook with more sheets in it that that. obviously
depending on the amount of data on each sheet your workbook could be
getting quite large and possibly unmanageable! I guess you will have to
try it! D...moving text from a word document to excel
I'm moving a large amount of text from word documents to an excel
spreedsheet, and I have a few questions:
1. When I copy/paste text from the document to the spreedsheet, the text
will sometimes expand the cell very large. How can I keep all the cells the
2. When I click on a cell that has text in it to read it, sometimes it will
only show the text in a long downwards column, whereas other times it shows
it as a big 'blurb' to the right side (which makes it easier to read). How
can I set it up so it is not in a long column?
3. How can I insert cells without h...Excel-Multiple Cells Being Hi-lited
Sometimes when I'm setting up a worksheet and I left-click in a cell,
multiple cells in the same column are hi-lited. After it happens the first
time, it continues as I move through the worksheet, reducing my ability to
get work done considerably. After some trial and error, it seems to occur
when I've been adding and/or deleting columns and/or rows, after a header has
been installed. I can move throughout the worksheet using the arrow keys,
but it is a time consuming and cumbersome technique. I think the version I'm
using is Office Professional 2007 (file extensi...where do office 2000 (including excel of course) service packs go
where do office 2000 (including excel of course) service
packs go. I don't know why they don't give you the option
of downloading and saving them before installing the
various program updates and service packs. This way
whenever I do a fresh reformat of my computer, i need to
spend hours getting all the updates again off of the
internet, where as if I could save thme, I would just have
to re-install. Any help would be appreciated
Don't know about Office 2000......never used it, but Office Download center
offers you the choice of installing or saving to install file to disk....memory problem of Excel 2003 copy & paste
I am using Excel 2003 for some project.
I am having 2GB C drive harddisk space.
After a while, the Excel begins to be extremely slow in copy and
It takes about half an hour to copy and paste just a few cells...
I've consulted people. It seems a memory problem.
But I cannot close my windows and kill the processes, because I am
running long-running (overnight) jobs...
I cannot reboot either.
Is there a way to clean the memory and let Excel 2003 clipboard
function properly without rebooting or killing my 4 long-running
p.s. I am sure this is an is...in creating a pie chart in excel 2007
How many rows or columns of data can the pie chart plot
I once tried 360 cells and got a wonderful Moiré pattern
Why not just experiment with 1, 2, 3 dozen and see for yourself if the
result is acceptable ?
Microsoft Excel MVP
"bsalohcin" <email@example.com> wrote in message
> How many rows or columns of data can the pie chart plot
According to MS:-
Data series in one chart 255 (max limit)
Data points in a...How can I line up 2 columns with similar information?
I have 2 columns with names in each and I'd like to line them up next to each
I think we'll need more information, Kathy. I don't understand what you're
trying to do. Can you give exactly what's up?
"Kathy" <Kathy@discussions.microsoft.com> wrote in message
>I have 2 columns with names in each and I'd like to line them up next to
Column A has employee number, Column B has the same employee numbers but has
addi...One Record Per Page Printing-Access 2007
Report for daily appointments for senior transportation drivers. Report is
grouped by Driver. Keep together is selected.
Detail band: Keep together-Yes; Force New Page-Before Section; Can
Grow-Yes; Can Shrink-Yes
Goal: Report generated so each driver has his/her own appointments.
Orientation: Landscape, paper size 8.5 x 14, column width: 13.5729"; column
When previewing in Print Preview one record per page is appearing rather
than all appointments for a driver for a given date. I have the bands as
narrow as I can make them. I am missing somethi...Drop line on only one data point in series
Is it possible to add a drop line to only one data point in a series? If so,
how? I believe attaching an autoshape line to a single data point would also
meet my needs. I would like to be able to have a single data point marked
with a line that doesn't require repositioning every time I add new points to
the end of the series, which is daily. Any ideas?
An autoshape would move anytime a heavy truck drove by. You could add custom
negative error bars to the series, where the range containing the values
contained zero for each point except for the one you want the drop line for.
Easie...How do I make a particular column required in Excel? #2
Our NPO is creating a reimbursement chart in Excel. We're trying to make it
so that if employees do not fill in one particular column entitled
"Projects," they will get an error or will be unable to have a final sum
Is there any way I can make this particular column required so that if it is
not filled in, the chart will not complete properly?
Thank you in advance for any advice or help--I'm a bit of a novice to this!
...Excel Events Conflict with VB and C# AddIns
I have two com addins running in Excel. One is written in VB and the
other in C#. Both addins are interested in the Workbookopen event.
When the event is triggered the c# code captures the event but the VB
code does not. If i disable the c# addin then the vb code works. Looks
like the c# addin is somehow blocking the vb events.
Anyone know how to fix this?
There is only one WorkbookOpen event, so once one add-in hooks it, there
is nothing for the other one to hook.
If you are hooking the WorkbookOpen event in your add-ins, this is
likely your problem.
You may need...cannot get BCM to work on Office Enterprise 2007 and Windows 7
I have Windows 7 and Office enterprise 2007 and tried to install BCM 2007 and
got it installed then opened Outlook and said it could not setup database. Is
BCM 2007 compatible with Enterprise and Windows 7. Is there a work around?
...Formatting detail section w/two lines
HELP, I'm trying to create the below in a report, but when I align the
"title" field below the "name" field and the "background" field is more than
one line, the "title" is no longer directly underneath the name. Is there
anyway to accomplish this?
Thanks for your expertise!
A couple of things to try.
1- Size Backgroundbigger than two lines and set Can Shrik to No.
2- Combine Name and Title into a single text box and set Can Grow to Yes.
=[Name] & Chr(13) & C...I need a list of command line switches for Microsoft WORD.
I am using a Shell command to execute Microsoft WORD 2003. I need to halt
execution of VBA code until WORD finishes it's task. Is there a command line
switch for WORD to cause it to pause the VBA function until it is finished?
Is there a VBA command to pause execution of code until WORD finishes? Thanks.
I am pretty sure the answer to your specific question is "No". If you tell
us exactly what you are doing, including from where the Shell command is
being executed, maybe we can suggest another way that will overcome the
Hope this helps.
Please r...Portrait only printing in Excel
I have an interesting problem. I have a workstation (Dell
Pentium IV XP PRO) that has Office 2k on it. When I/we
try to print to a networked printer, the document will
only print in portrait no matter what changes I make to
page settings or printer settings. We are on Active
Directory, so as long as the documents are submitted from
a different computer, it will print fine. Any suggestions?
This could be a complete waste of your time, but the first thing I'd try is to
reinstall the printer driver.
(maybe even get a fresh driver from the printer manufacturer's web site???)
Howa...VBA & Excel
I don't know a lot about VBA.
I need to make an Exe file with VB to give 3 buttons each button starts an
excel work book (book1, book2,book3). I am thinking of a form that appears
on the screen.
When the "Exit" button is cliked it will make an other copy of the 3 excel
files on another folder (say: d:\data) for example (like a back up copy).
Can any one help
You can not make exe files with VBA. If you can use VB5 or VB6 instead then
adapt the VBA code from
http://www.erlandsendata...center text when conditional format applied
Textbox control on Access 2007 form lost its centered alignment when
conditional formatting is applied. This did not happen in previous versions
I tried using format painter to apply conditional formats from a control
created in an earlier version, but this failed. The control created in the
earlier version then lost it's centering after saving in Access 2007.
Interesting. I tried to replicate this behaviour but failed, it all worked
as it should.
Try revisiting your form after applying the conditional formatting and
resetting the text box to center text.