Can you insert a picture into a specific cell?
Or do they only "float" on the page.
They float over the worksheet, but you can adjust the size so that it seems to
fit a cell exactly.
If you insert a picture, you can hold the alt-key down while you move/resize the
picture. When it gets close to the edge of a cell, it'll snap-to that edge.
> Or do they only "float" on the page.
...How to select series in chart?
I know I asked this question before, but (sigh) I cannot find the
answer now, when I need it of course.
How can I select a series in an Excel chart (XY Scatter) using the
keyboard, not the mouse?
The issue is: I have overlapping series, so it is difficult for me to
select a series by moving the mouse cursor to a point in one series and
right-clicking it, as I normally do.
Someone once mentioned a ctrl and/or shift key combination (I think)
that would allow me to select each series explicit in round-robin
fashion. That is what I am looking for again.
More generally, how could I have found...Linking a Chart with graphics to ppt
when I create a chart with scatters, which carry graphics like
and link this to Powerpoint, the graphics are shown there in a very low
quality with large pixels.
Any ideas how to improve this?
Thanks in advance,
...double clicking and draging a column in a chart to chg data
in Excel 2003, double clicking on a column in a chart and then dragging the
column up or down would change the data in a table upon which the chart
How does one do this in excel 2007?
That feature has been removed in 2007, there is no way to do it.
If this helps, click the Yes button.
"Tom of inns" wrote:
> in Excel 2003, double clicking on a column in a chart and then dragging the
> column up or down would change the data in a table upon which the chart
> How does one do this in excel 2007?
&g...chart MAcro to change on activecell
Here is the macro below.. The only problem is that the columns change every
month. so range (columns)keeps widening.... I have sorted it by selecting
range upto column N. so it is provided for all 12 months.
But now the "Grand total" column which is always the last column also gets
included..(.which shouldnt be included in the range for the chart)
Is there a way to modify this macro ?
Dim ThechartObj As ChartObject
Dim Thechart As Chart
Dim Userrow As Long
Dim CatTitles As Range
Dim SrcRange As Range
Dim SourceData As Range
If Sheets("summary").Ch...Multiple stacked bar charts
I have a project where i have to chart the compliance of three groups over a
number of months. So for each data set there is a Compliance#1 stacked upon
NonCompliance#1, then Compliance#2 stacked upon NonCompliance#2 and finally,
you guessed it, Compliance#3 stacked upon NonCompliance#3.
When i design a chart in excel it wants to place everything on top of each
other producing one column of six not the required three columns of two for
each week in the display. Can anyone point me i the right direction for
you can achieve this effect by having two layers in your x axis
the at...transparent areas in charts?
How do you create transparent areas in imbedded charts? (for Excel 2003).
When I click on "Format Chart area", then "Fill effects", there is a place
where you can change the transparency settings, but it is faded out and will
not work. Any Ideas?
You can make most elements totally transparent. Ignore the transparency
button, which is only for decoration. Instead, if you set an element's area
to none, the element will be transparent.
Jon Peltier, Microsoft Excel MVP
Tutorials and Custom Solutions
Peltier Technical Services, Inc. - http://PeltierTech....printing 2 charts on single page
Using Excel 2k, Win 2k
I was trying to print to line charts on a single page to demonstrate the
corelation between the two data sets.
I would like to print in portait mode with one chart on top of page and one
on bottom. Excel only seems to offer putting chart 2 on a separate page or
embedding it in chart one.
I am not very familiar with excel charting capabilites can anyone suggest a
...OWA jumping mouse
I have two computers on my network that are having an interesting
issue. When they are creating a message and typing away in the body of
the message, randomly when they hit a key, any key, they system will
act as if the mouse was clicked. If the mouse is over the send button,
it would have sent the email. If the mouse was over the start button,
the start menu would have come up. Where ever the mouse was left at,
it will act as if it was clicked.
It is very random but often. This only happens in OWA, not in outlook
or any other place. Both systems are running XP pro SP2 with IE 6 SP2.
...open two different Access reports
I was wondering if i can get some help here. I have two different reports
that i want to open when a user clicks a button to view the reports for
printing. Is there any way of popping them up at the same time in VBA?
Thank you in advance
>I was wondering if i can get some help here. I have two different reports
>that i want to open when a user clicks a button to view the reports for
>printing. Is there any way of popping them up at the same time in VBA?
>Thank you in advance
Yes. Call the DoCmd.OpenReport command twic...Joining text with a formula in cell #4
just to complete the thread...
I found the answer.
You have to change the format of the cell to custom 0.00"*"
this is the only way it will show only 2 decimal places
Thanks for the hel
Mustard Head's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=1630
View this thread: http://www.excelforum.com/showthread.php?threadid=27700
...IsOutLookClient() returns wrong value
IsOutLookClient() returns wrong value when both web client of crm and outlook
client are running on the same workstation
It looks like the same cookie(used for determining what client is running)
is used by the sessions of each client.
Look for "LightClient" in IsOutlookWorkstationClient() in global.js
Oeps...I seem to have made a wrong assumption...
Between the to clients IsOutlookClient() seems to work ok...
But in outlook client the IsOutlookClient() function gives false for
me...after I have opened a page from the Microsoft Crm folder structure...
On another workstation it...visual basic
I trying to retrieve values from a table to calculate the 14days average
value of a stock closing price. However, i encounter some problem as stated
beside the code as follows:
'Calculate the average value of a given value.
Dim db As DAO.Database
Dim rst As DAO.Recordset
Dim varBookmark As Variant
Dim numAve, numDaysAvg As Double
Dim intA, intB, lngCount As Integer
Set db = CurrentDb
Set rst = db.OpenRecordset("SGX Individual Historical", dbOpenTable)
Do While Not rst.EOF
intA = 1
intB = 0
varBookmark = rst.Bookmark
n...changing values of one field based on another
How can I best change the values of one field in a table based on
values of another field of the same table. We have an existing table
of thousands of entries and I would like to use the following logic to
populate a new boolean field.
If field1 = "Done" Then BooleanFieldCompleted = True
I have some Excel VBA experience but limited Access. I dont want to
do this manually! Any assistance appreciated.
In general, you'd use an Update query. However, in this case I don't see why
you'd need such a field.
Why not just create a query with a computed field that returns True...Single click selects multiple cells
When clicking on a single cell multiple cells are selected. The one time
solution for this is to zoom in or out. This is problematic as 60% seems to
be the zoom that works most of the time but at this zoom level the cell
contents do not display. The time lost and the frustration that builds is
killing my productivity and office attitude. Please give all of us a permanet
This post is a suggestion for Microsoft, and Microsoft responds to the
suggestions with the most votes. To vote for this suggestion, click the "I
Agree" butt...Referencing cells across sheets
I've created a workbook with three sheets. The first three
columns of sheet 2 and sheet 3 are referenced to the first
three columns of sheet 1.
What I'd like to do, is set the workbook up so that if I
insert a row before, between or after referenced rows in
sheet one, a row will also be inserted, and referenced, in
the corresponding place on sheets 2 and 3. Does anyone
know how to do this?
Also, if no data is entered into a cell on sheet one, the
value shown in the corresponding cells of sheets '2'
and '3' is '0'. I need those cells to remain bla...Copying Data in a cell in one sheet to a cell in another sheet
I've run into a problem trying to copy data from a cell
in one sheet to another. I have a spreadsheet
called "rating" which contains a number of formula that
calculates a final number. I also have a spreadsheet
called "Final" that copies over the information
from "Rating". In "Final", I'm trying to copy a number
from "Rating" into a particular cell. I put in =Rating!
G89, but it won't work. When I press enter, a window
pops up "Update value:Rating". I press enter again and
in the cell where I want the number ...How to unlock locked cells by MACRO?!
I have locked Sheet and I need to change particular cells. But when my
macro wants to change it => ERROR :/
Is there any way to unprotect these particulary cells by macro and
change them? - after that action, of course, I want to lock them again.
Please help me, Pedro
Just unprotect the sheet, do the work, and reprotect the sheet. Kind of like:
'your code to change stuff
Petr N�me�ek wrote:
> I have locked Sheet and I need to change particular cells. But when m...How to add a button to restore all altered cells original values?
I want to add a reset button to an excel spreadsheet that will restore the
values of all changed cells to the original saved ones.
Any help would be appreciated.
this would require quite some VBA code as you somehow have to store the
original values for example on a separate hidden sheet
"Dawnybros" <Dawnybros@discussions.microsoft.com> schrieb im
> I want to add a reset button to an excel spreadsheet that will
> values of all ...Can i use conditional formating on a cell when it contains a formula?
I am trying a "conditional formatting" on a cell that contains
formula, but it didn't work.
"If cell value is equal to 0 then font - white" This doesn't work,
If i use this condition on a cell without formula it works just fine.
sit's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=262
View this thread: http://www.excelforum.com/showthread.php?threadid=26784
are you sure your formula returns an exact zero?. Could you post the
formul...How do I convert a concatenated value into a know value
I am trying to get the results of a multiple input table, which get
concatenated, read out as usable values
eg. If the concatenated values are for example *llbbt* , I need this t
be read as Simon, or *lbttd* must result in Fred etc...
I will attact the spreadsheet.
Attachment filename: book3.xls
Download attachment: http://www.excelforum.com/attachment.php?postid=54116
Message posted from http://www.ExcelForum.com
You are probably better off by describing your problem, most regulars won't
Peo Sjoblo...Cant read one instance of recurring appointment
The problem we're having is a little different that what I've seen
posted. A user randomly gets the message "Cant read one instance of
recurring appointment. close any open appointments and try again, or
recreate the appointment" several times a day. When you click OK the
same message appears several times. Outlook doesn't indicate which
recurring appointment is having the problem and the message just pops
up at various times even if the user isn't in the calendar. We've
deleted the Frmcache file and run the clean profile switch, but that
hasn't worked. Has an...Cell with large amount of data not showing all data
I'm running Excel 97. I have a cell with 358 words (1928 characters with
spaces). Word wrap is on for the cell. Only part of the text is displayed
even though the cell is big enough to show everything. If I make the cell
wider (wider than a page) more of the text shows but not everything. I tried
a new worksheet with the same text and had the same problem. Is this a known
issue with excel? Is there a solution?
Left to its own devices, excel will only show about 1000 characters in a cell.
But you can add some alt-enters (to force a new line within the cell) and see
more s...Value is BLANK
In a form i'm working on i've asked this question before and i'm unable to
locate the replies, but in one cell I have a date to be enter and in the
other cell it takes that date and add 5 days to the date to give me a due
date. But if no date is enter then I want to to remain blank insted giving me
Say that the date is to be entered into A1, then enter this formula into the
Please keep all correspondence within the Group, so all may benefit!
==================...Null value in form not trapped by beforeupdate event
I have a form in Access 2003 linked to a SQL Server 2005 table. When
I clear the value in a textbox (bound field is varchar and is
required), I want the before update event to run to tell the user the
value cannot be null.
When I press the tab button to move to the next field after clearing
the texbox, the before update event is not triggering and instead I'm
getting the following error:
You tried to assign the Null value to a variable that is not a Variant
data type. (Error 3162)
How can I prevent nulls before and this error from triggering?