Can you insert a picture into a specific cell?
Or do they only "float" on the page.
They float over the worksheet, but you can adjust the size so that it seems to
fit a cell exactly.
If you insert a picture, you can hold the alt-key down while you move/resize the
picture. When it gets close to the edge of a cell, it'll snap-to that edge.
> Or do they only "float" on the page.
...Can't insert Char(1) into SQL Server from Stored Procedure
I am trying to insert a char(1) field into a table from an ASP.Net/C#
At first I was inserting rows into the table but none of the columns that I
was inserting the rows into were char(1) columns, they were mostly int and
Then I found out that there was one column in the list that was not supposed
to be an int column but instead it was supposed to be one of the char(1)
columns into the table.
So I replaced the int column in the list with the char(1) column and since
the value of the char(1) column resulted from a CheckBox ('Y...Can E-mail recipient policy be linked to the OU membership?
Running Exchange 2003 (mixed mode) and Windows 2003 server (Windows 2000
I'd like to create a e-mail recipient policy that is linked to the different
OU's that are created on the system.
Is it possible to link the policy to a specific OU or do I need to create
groups on the AD to control which recipients a policy applies to?
Yes, you can create a recipient policy that looks to just a specific OU. It
is done through LDAP queries. Here are some references to articles and
whitepapers that discuss how to work with recipient policies.
HO...Can't open 2005 data file after reinstalling Money 2005
I am experiencing a recurring problem. I have had to reinstall Windows XP
and MS Money 2005. I am now unable to open my previously converted 2005 file
or restore any backup version. I consistently get the following error
"Money cannot locate filename or cannot open it, possibly
because it is a read-only file, you do not have
permission to change it, or your disk drive is write-
protected. If you have chosen the correct file and it
cannot be accessed, you will need to click OK and then
Restore your most recent backup file."
Any help or thoughts would be greatly ap...Using mouse wheel in VB editor
Just tried using the mouse wheel to scroll within visual basic editor in
excel but it wont let me. How can I turn this feature on. I am using Excel
Thanks in advance.
This is a known problem with the latest MS mouse drivers. You
can either install version 4 of the drivers (current version is
5), or use FreeWheel, and freeware program at
Microsoft MVP - Excel
Pearson Software Consulting, LLC
"fullers" <firstname.lastname@example.org> wrote in message
ne...Send to certain person using specific email account
I send an email to a certain receipient but don't want to use the
default email account.
Is it possible that when I send to them (plain text) , that it will
choose the other account I want to use to send it? Please advise how I
set this up.
I do not believe that this can be achieved automatically through standard
use of Outlook as you need to manually specify the name of the account to
send from if different than the default.
However, it would be possible using the Outlook object model. An Addin would
need to be developed that monitored each mail item prior to sending. If the
d...can i download lxce serv.exe
want to open message lxce serv.exe using windows xp
...Use exchange from a trusted domain
I have domain a and domain b. Domain a is all set upp with exchange etc.
Domain b was bought, and they don't have exchange. I have trust between the
domains and file sharing and authentication are ok.
What we want to do is, make users on domain b and let them use the exchange
(on a seperate storage) on domain a.
The users on domain b must logon to domain b, but need to have mailbox on
Domain a are running on win2003 and exchange 2003. Domain are running on
win2003 with forest and domain ready for exchange.
thanks in advance,
Thi...Using Access 2003 on client to see Sharepoint 2007
Testing a Sharepoint environment and I can easily manipulate and run the
database from Access 2007, but when I try to use Access 2003 it wants me to
save the database to a location. The Access 2003 has the compatiblity pack,
but it seems to not work when I download it.
So the question is using Sharepoint 2007 and posting the Access 2007 format
to it, can a user go to the sharepoint site and use a 2003 Access database
that has the compatibility pack and open without having to download it?
Message posted via http://www.accessmonster.com
Send check for $500.00 to: David A Jenn...how many receivers i can add
i want to use outlook send 2000 thousands emails to 2000 peoples at the same
can i put them all in the recivers and send them at one time?
thank you for you help
...How Use ShellExecute with a CMemFile
I need to store files of various types (such as .doc, .xls, .jpg, .pdf,
..wmv, ...) in a database. Upon retrieval of such a file I have the file as
data in memory in a CMemFile. I need to then "display" the file in the
aproriate application. If I were to write the CMemFile to disk and create
an actual file I could then, of course, use ShellExecute() to launch , say
Word to display a .doc file.
However, I would much prefer to avoid the overhead of writing the data to an
actual file and then dealing with having to detect when the User is done and
cleaning up the file I had ...With and import tool can you change only item description?
Is there a way to change only the item description on a large quanity of
items. What about the extended description? Thanks for your help.
Use the MS SQL Data Import Tool by EMS. $65.00. The QSImport Tool available
to download from Microsoft will probably work but is not supported by
Kinnard L. Kohler
Business Machines Systems
6101 South Shackleford Road
Little Rock, AR 72204-8606
> Is there a way to change only the item description on a large quanity of
>...Can i use conditional formating on a cell when it contains a formula?
I am trying a "conditional formatting" on a cell that contains
formula, but it didn't work.
"If cell value is equal to 0 then font - white" This doesn't work,
If i use this condition on a cell without formula it works just fine.
sit's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=262
View this thread: http://www.excelforum.com/showthread.php?threadid=26784
are you sure your formula returns an exact zero?. Could you post the
formul...Can't configure Outlook Express
I had Outlook express set up for the Money newsgroup, but
somehow I lost it. Now I even forgot how to set it up
again. I always get the error message saying "server
cannot be found". The server name I typed in was
microsoft.public.money, and I am not sure what should I
type in here
Thanks for help
In microsoft.public.money, wj wrote:
>I had Outlook express set up for the Money newsgroup, but
>somehow I lost it. Now I even forgot how to set it up
>again. I always get the error message saying "server
>cannot be found". The server name I typed in was
&g...Using INDIRECT within functions
I learned a bit from JLathman in a previous post but tried to use the same
methodology with this formula (also learned from this Group to get the last
entered value in a column) without much luck.
The original formula was this with 2009 sheet being static:
Trying to make it dynamic I tried the following without success:
=LOOKUP(INDIRECT("2,1/(" & O1 & "!$H$3:$H$65536<>"")," & O1 &
Did I miss something or are...what printers can run Vista
just purchased a dell which came with Vista on it. now my printer (HP 5550
deskjet) won't print. I need to find a new printer that i can hook up to the
This is an Access newsgroup. We help with questions related to Microsoft
Access - the database application that is part of MS Office Professional.
"monroe" <email@example.com> wrote in message
> just purchased a dell which came with Vista on it. now my printer (HP
> deskjet) won't print. I need to...How to use count for calls per hour
I am trying to create a pivot table and chart that will show me the # of
calls per hour by day for a range of dates Aug 1 - Sept 19. My data looks
like this where each line is the date and time of the call:
How do I get a count of the # of the calls per hour by day?
8/1/08 12:48 AM
8/1/08 1:53 AM
8/1/08 2:36 AM
8/1/08 3:24 AM
8/1/08 3:37 AM
8/1/08 4:04 AM
8/1/08 4:44 AM
8/1/08 4:55 AM
8/1/08 4:58 AM
8/1/08 7:02 AM
8/1/08 7:28 AM
8/1/08 7:43 AM
8/1/08 7:47 AM
8/1/08 7:56 AM
8/1/08 7:58 AM
8/1/08 8:13 AM
8/1/08 8:33 AM
8/1/08 9:07 AM
8/1/08 10:28 AM
8/1/08 10:38 AM
8/1/08 10:44 AM
8/1/08 ...Recommendations Please: Software That Can Backup Outlook While It is Open/Running
As the subject says. There are lots of packages that will backup the pst,
etc. once Outloook is closed, but some products claim to do it while Outlook
is open. Any suggestions on products that actually do this and do it
properly? If the product can safely backup over the network to a server and
can do incremental/update backups throughout the day, I'd really like to
hear about it.
...How export all mailbox-enabled users from the GAL using Outlook?
We have a user which, for administrative reasons, needs to export all
mailbox-enabled users in the GAL now and then. They just need all the
names. Is there a straightforward way for them to do that?
We don't want to give them any special permissions and want to avoid
server scripting. Ideally, they should be able to export it to a CSV
file or any text file.
> We have a user which, for administrative reasons, needs to export all
> mailbox-enabled users in the GAL now and then. They just need all the
> names. Is there a straightforward way fo...Can not open PDFs
I'm using Outlook Express,when I receive e-mail with pdf
attachments I can not open or save the PDF files I can
see that the file is there but nothing happen.
Open the message in question. Is there a informational bar across the top
that states Outlook Express blocked access to the file? If yes, select Tool
> Options > Security tab and uncheck the second box from the top concerning
"Cesar Calderon" <firstname.lastname@example.org> wrote in message
> I'm using Outlook Express,...SQL 2008 running on a VM using all allocated memory
I've got a sql2008 server running on a VM. There's 9GB of physical RAM,
which 7GB have been allocated to SQL Server. But when i look at task manager,
i see that the SQL server is actually using all 7GB, which is pegging the
memory usage of the overal box at above 90% used. We're mostly a sql2005
shop, and none of those servers are doing this. I have sql2005 running on
VM's, someone actual servers as a named or default instance, and some even
clustered. None of them have this problem. Is this a normal thing with
sql2008 only? Any insight would be greatly appre...How can I sum only amounts that are in BOLD format within a column
I need to get a total from a worksheet that has hundreds of amounts in it.
However, I only need the total of the amounts that were marked with have BOLD
font. Please help me I don't have much experience with EXCEL.
Thank you very much!
W a n d a
try this for column D
x = Cells(Rows.Count, "d").End(xlUp).Row
For Each c In Range(Cells(2, 4), Cells(x, 4))
If c.Font.Bold Then mysum = mysum + c
"Wanda" <Wanda@discussions.microsoft.com> wrote in message
news:89A268A6-...Anyone use Promys CRM software integrated with GP Dynamics?
Our company is considering using Promys as a CRM to create quotes and
sales orders for the sales team. I am concerned about the integration
with GP and what the pitfalls may be. Is anyone here currently using
Promys with GP Dynamics?
...Can't use openURL or access internet on some locations
I have previously raised a question where openUrl threw an exception in
a specific office location. However the problem I have now is that the
application just freeze when I call openURL. It seems as it is waiting
This only happens at one company so far the company does have a proxy
but so do I at work and I have no problems.
I have also tried the Microsoft TEAR sample and it behaves the exact
same way, it says "Opening internet...Connection made" and then it just
stops. If I run it on my computer it gets the webpage and everything
I have tried to set t...Loading Text File to TextBox using LoadFromFile
I'm creating a form that allows the user to pick a txt file (dialog) and
then display the path and contents on the form. The code has been cobbled
together as I found the pieces that worked, so bear with. I got the file
picker working and displaying the file name on the form, but the file
contents won't display. I had a feeling the problem had to do with importing
a namespace (see the error in the code when I tried "Imports System.IO") or
with a missing reference.
Using Access 2003.
References: VB for Apps, MS Access 11 Obj Lib, OLE Auto, MS V...