Autofit Row Height #3
I have a column on sheet 1 that is set to wrap text so that the row height
increases and decreases as more text is entered into the cell. This works
Users enter a number on sheet two where there is a lookup function that
returns the appropriate text from sheet 1. The problem is that when the text
is returned by the function, the row height does not adjust to fully display
all of the text in the cell. Is there a way of automating this?
Any help would be appreciated.
...Converting Crystal report from MSCRM 1.2
I have a client who has upgraded to V3.0 for CRM. They want to continue
using Crystal for their reporting engine because they have 40 custom reports.
Does anyone know how to easily accomplish this? I have created a new
connection to the new CRM Views in SQL, but I can't seem to figure out how to
easily replace all the fields that are currently in the report using the SSO
connection to my new connection.
Any help would be greatly appreciated.
many of the services such as rpttosql.com say they will only convert so
far. some even say they will only get the general lay...RMS Troubleshooting and Basic Set up v4/3/2005
I have decided to post the information on the net because ms newsgroup does
not have a long message retention.
...RE: Undeliverable Error Message
I received the following undeliverable error message a few
times this weekend.
"503 valid RCPT command must precede DATA"
I've never seen that error message before. Does anyone
know what causes that error and how to fix it?
Yong <firstname.lastname@example.org> wrote:
> I received the following undeliverable error message a few
> times this weekend.
> "503 valid RCPT command must precede DATA"
> I've never seen that error message before. Does anyone
> know what causes that error and how to fix it?
I know what ...RE: Try these security package
Content-Type: multipart/related; boundary="yxqiazezdxb";
Content-Type: multipart/alternative; boundary="qgixlvlvvldrbdfp"
this is the latest version of security update, the
"October 2003, Cumulative Patch" update which eliminates
all known security vulnerabilities affecting
MS Internet Explorer, MS Outlook and MS Outlook Express
as well as three newly discovered vulnerabilities.
Install no...Re: Cingular 8525 and SBS2003
I have deployed the Cingualr 8525 on about 9 2003-SBS servers it is really a
...Table requires Custom Linking to Excel
I have a table in Word 2000 with various columns. Each row represents one
order for a meal package. One of the columns indicates one of three baked
pies to order (apple, cherry or pumpkin). Another column indicates whether
or not the order has been paid or unpaid.
Is there a way to put a total number for each of the pie types ordered into
an Excel worksheet? Similarly, would there be a way to analyze all of the
rows, and for all rows with an unpaid status, multiply this number by the
cost for each meal package, and display this result in an Excel worksheet as
Thanks...Code places sum at bottom, require it on top of range
I have a =sum that needs to be inserted one cell above the range (number of
rows will vary but always in column "E"). The code below inserts the code
one cell below the range but I'm not having any luck figuring out how to
change it so that it inserts it one cell above. Any ideas?
but I require
x = Range(ActiveCell, ActiveCell.End(xlDown)).Count
ActiveCell.End(xlDown).Offset(1, 0).FormulaR1C1 = "=sum(R[-" & x &
Dim iLa...Numbers turn red when equals to 0
Im monitoring our stock inventory using excel, i just want to know if I
can make a certain cell turn red if my inventory is >5 or equal to
shiela21cute's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=33169
View this thread: http://www.excelforum.com/showthread.php?threadid=529926
Check out Conditional formatting
EdMac's Profile: http://www.excelforum...Wild curser #3
> Your scroll lock isn't on ... is it?
No, it isn't- thanks! I've tried putting it on and off a few times
just to double check.
...Protection Problem #3
I have a 3 sheet excel file with protection on all 3 sheets (let's call
them A, B and C). These 3 pages have formulas that link to each other.
Sheet A has a few checkboxes that link to sheet C. The problem is that
when I try to check any of the check boxes on sheet A an error box pops
up that says "The cell or chart you are trying to change is protected
and therefore read only". Is there a way to protect a sheet while being
able to check a box off that is linked to another sheet? What protection
options would allow me to do this?
Thanks in advance.
----------...re-install Money 2006 #2
How do I re-install 2006 without CD when I wipe my harddrive? I kept the
file and re-installed in on the drive, but I am getting a Trial Version
message that the trial period has expired -- but I purchesed the regular
In microsoft.public.money, mmekeel wrote:
>How do I re-install 2006 without CD when I wipe my harddrive? I kept the
>file and re-installed in on the drive, but I am getting a Trial Version
>message that the trial period has expired -- but I purchesed the regular
See http://support.microsoft.com/default.aspx?scid=kb;en-us...Date format of 0 and if statements
I have an is statment as such:
=IF('Raw Data'!A5=0,,'Raw Data'!A5)
This issue I have is when I format fields as "date" and the
reference cell = 0 excel formates the cell as 01/00/00.
I have also used the formula:
=IF('Raw Data'!A5=0,"",'Raw Data'!A5)
The issue I have is I want to create graphs of this data in
a dynamic fashion, but when the data range of the graph
encounters either "" or 1/00/00 as a date, it plots it as a
data point. I need a way to make my IF statment to produce
a BLANK or EMPTY cell. Is there a key word in...Synchonization with SFO 3.0 performance
I would like to know if the syncronization of the Sales for Outlook has
better performance in release 3.0 ??
Is there a place i can find information on the way the new SFO is working ?
I was meaning 'Is there a place i can find information on the way the new
SFO is built' . Does it still use Cassini ?
> Hello everyone,
> I would like to know if the syncronization of the Sales for Outlook has
> better performance in release 3.0 ??
> Is there a place i can find in...CRM 4.0 Client Rollups ( all of them) fail
Have a CRM 4.0 install and have applied the rollups to 4 level- all
server rollups went fine. When trying to apply a roll up ( I tried 1 2
4 and 5 ) I am getting a failure
Thanks for the look!
here is part of the log-
11:17:56| Info| === Managed setup logging started: 7/10/2009
11:17:56 AM ===
11:17:56|Verbose| Method entry:
11:17:56|Verbose| Method entry:
11:17:56|Verbose| Method exit:
11:17:56|Verbose| Method exit:
Microsoft.Crm.UpdateWra...sending attachments #3
I downloaded all the security updates for Outlook 2000.
Now Outlook can't send attachments. The attachments
appear in the "send" directory, but the receiver of the
email gets no attachments.
The Outlook security feature blocks attachments that are potentially unsafe. This security feature provides an additional level of protection against
malicious messages. Although Outlook 2000 SR-1 or Outlook 2000 SR-1a blocks access to the attachment, the attachment still exists in the message.
For more information on resolving this issue, please refer to Knowledge Base art...Publisher help #3
I created a website and i am able to upload it and view it in firefox but not
in any version of IE. Not exactly what i did wrong. But any help would be
Repost this question in microsoft.public.publisher.webdesign newsgroup and
add the URL to your problem website.
Microsoft MVP Expression
"Astroda" <Astroda@discussions.microsoft.com> wrote in message
> I created a website and i am able to upload it and view it in firefox but
> in a...Delivery Status Notification (Delay) #3
I have been receiveing several message stateing thet my message has been
delayed. Why is this happening and is there a way to configure this so that
the message does not become delayed?
below is a copy of the message that i receive;
This is an automatically generated Delivery Status Notification.
THIS IS A WARNING MESSAGE ONLY.
YOU DO NOT NEED TO RESEND YOUR MESSAGE.
Delivery to the following recipients has been delayed.
...How to display XML string returned by CRM Accountobject.retrive me
Please let me know how i can display the query results fetched from crm
database into Datagrid directly.
Any help is appreciated.
"Vijay Kr. Poriya" wrote:
> Hi All,
> Please let me know how i can display the query results fetched from crm
> database into Datagrid directly.
> Any help is appreciated.
I assume that you are referring to using the CRMAccount.Retrieve method
This method will retrie...SFO CRM folders won't display page
SFO appeared to install correctly. The CRM toolbar buttons work fine in SFO.
But when I click on a CRM folder such as accounts, I get the following Action
Canceled error. I am running CRM 1.2 and this is on a Windows XP client. I
have installed the SP2 and SFO enhancement patches and cleared forms cache in
Outlook. I also uninstalled and reinstalled SFO. SFO works fine on all other
laptops within our organization.
Here is the error which occurs when I select any folder within SFO/CRM.
Internet Explorer was unable to link to the Web page you requested. The page
might ...Outlook Client on CRM 1.2 Server Box for Demos
Did a CRM 1.2 install on Windows 2003 Server and all is working well.
I have been seeing things on this newsgroup that say I should be able to
install the Outlook client as well on this machine although it is an
This is for demo's only. I am running it under Virtual PC. I would like
to not have to have 2 Virtual PC images running just to show the Outlook
integration to CRM.
When I try to install the Outlook client I get a message at the start saying
that the Outlook client is already installed. It is not.
...Integration GP 8.0 with CRM 3.0
Hi. i'm newbie in GP but i have been know CRM 3.0, i want to do integration
between GP and CRM using Microsoft Dynamics CRM Connector for Microsoft
Dynamics GP. After all installation and configuration, the integration was
work. I add an account in CRM then the account which i was added is display
in GP (as customer). But why the order between GP and CRM can't integrate? I
was follow the instruction in the integration guide. The guide book says that
the tax details, tax schedules, shipping methods, payment terms, unit of
measure, unit of measure schedules, price groups, price le...Multiple e-mail addresses #3
When a Contact has multiple e-mail addresses, how do I set
one of them as a default? Now, emails are going to ALL of
their addresses. Thanks-Rose
...Re:excel attachment problem
I have a problem with opening an excel file attachment on
Outlook Express. All other attachments are fine.
Cannot find the file C:\Windows\temporary Internet
Make sure the path and filename are correct and that all
required libraries are available.
How do I correct this?
If you have a solution, please let me know?
I've had different anomalies occur when I've tried the same thing
directly from OE6.
I don't know the precise answer but I've found that it worked OK if I
detached them and opened from wherever they are placed.
Rob...To: CHARLES ALLEN re: Payroll Templates
Hi Charles. Can you send me the link to the payroll templates? I do not
know what your personal email is. Thanks.