data input in text box
We have a form which the operator enters data in a text box. Currently we
have a 'done' button on the form that the operator clicks to send the text
box info to a vba program. How can we send the text box info to the vba
program when the operator hits the enter key @ the end of the data entry for
the text box? TIA
In Christ's matchless name
ted & colleen
Use the control's AfterUpdate event.
Doug Steele, Microsoft Access MVP
(no e-mails, please!)
"ted" <n6trf@arr...Copy entire row where CellValue=0
I need to loop through the collumn and search for value that is more then 0.
When I find it I need to copy whole row and paste it 2-3 rows below the
table. I tried to select the collumn and search the selection but for some
reason I copy and paste only one row.
Thank you for any help.
as a starting point:
"OxanaB" <OxanaB@discussions.microsoft.com> schrieb im Newsbeitrag
> I need to loop through the collumn and search for value tha...Transferring over outlook data to new XP machine
How do I transfer over my old emails, address book to my
new XP machine? I have looked over the internet and found
nothing the tells me EXACTLY how to do this, any help
would be greatly appreciated.
If your using MS Outlook copy your .PST file across and import it into the new install.
>If your using MS Outlook copy your .PST file across and import it into the
No, don't import it. Simply use "File">"Open"
3290 Patterson Ave. SE, MS 1B3
Grand Rapids, MI 49512-1991
Brian.Tillman is the nam...SMTP Connectors #4
I have a problem with two Front-End servers in NLB. I have two connectors
with address space *, one connector with cost 10 the other with cost 20 for
connector availability purposes. Inbound mails are targeted to FrontEnd1,
outbound mails should go from FrontEnd2 (e.g. MX for FrontEnd1 cost is 10;
MX cost for FrontEnd2 is 20)
Connectors: FrontEnd1 - Address space * - cost 10 - bridgehead srv =
FrontEnd1; FrontEnd2 - Address space * - cost 20 - bridgehead srv =
If both servers are up and running and somehow some mail ends in queue on
FrontEnd2 it correctly crea...Parsing data from one spreadsheet into another format
The data that we dump out of one machine comes in like below.
%AT_1300 Bottoms|Conductivity| (Water Out) InputRange VDC1to5
%AT_1300 Bottoms|Conductivity| (Water Out) Custom_Range_Low 0.0
%AT_1300 Bottoms|Conductivity| (Water Out) Custom_Range_Hi 0.0
%AT_1300 Bottoms|Conductivity| (Water Out) MinScale 0.0
%AT_1300 Bottoms|Conductivity| (Water Out) MaxScale 20.0
%AT_1300 Bottoms|Conductivity| (Water Out) EngUnits mhos
%AT_1300 Bottoms|Conductivity| (Water Out) StepResponseTime 1.0
%AT_1300 Bottoms|Conductivity| (Water Out) DigFiltTimeCnst 0.016
And I need to convert this data to this f...Using part of a cell in a chart title
I have a chart which should get a title. However, this should be partly be
used from a cell e.g.
"counted with 5%"
5% should be taken from the cell and used in the title.
Is this possible?
Yes it's possible but all of the chart title needs to be in the cell. So you
may need to use a helper cell and concatenate text and value.
Andy Pope, Microsoft MVP - Excel
"Nicole" <Nicole@discussions.microsoft.com> wrote in message
news:5CB7A971-AA7F-4C34-BB42-7DC283AA2958@micro...Using expression builder object
I'm developing a wizzard in Access which builds import templates for various
data sources to a fixed set of tables. In step 3 the users must be able to
build an expression ; for instance Left([Fieldx],20) . Now I would like to
have a command button on my form which calls the Access expression builder to
allow the users to use this to build the expression. This expression will
then be stored in a text box linked to the templates table.
Anybody know how to call and use this object from VBA code?
I th...How to keep format when importing Excel into SQL.
Can anybody help me please?
When I import Excel file into SQL, a field that formated as 0000000000
(custom), loosing leading zeros. I tried to change data type in SQL after
importing. No luck.
I appretiate any help.
See if using IMEX=1 helps:
I tried this, but got an error: "The OLE DB provider
"Microsoft.Jet.OLEDB.4.0" has not been registered."
Thank you very much for looking into this.
"Plamen Ratchev" wr...MS Money 95 data files
I hope that some one can answer this for me.
I have used MS Money 95 for years, and it works just fine for me on Windows
XP, however, I now have to reformat my hard drive, and have discovered that
I can nolonger find my original install disk. Will the latest versions of
Money still read the MS Money 95 data files. All that I have ever used the
program for is to track my investments, and am unlikely to do any different
in the future.
In microsoft.public.money, Stan Banner wrote:
>I hope that some one can answer this for me.
>I have used MS Money 95 for years, and...HELP! Need to export hourly sales data on POS (NOT RMS)
How can I export hourly sales data across a date range? For instance, I
want to show hourly sales for the month of October so I can graph it and
post it in our break room.
If I can't export hourly data, can I export daily sales?
The built-in reports don't address this data format.
This is a multi-part message in MIME format.
Mark, This should work for you. Keep in mind it takes up to 5-10 minutes to
load...adding name /creating field/query?
I can create an invoice_number field in a query using the primary
field ID from the main table as
but if ID say is 100, I cannot work out how to create
We aren't there. We can't see what you're looking at.
Where did "renewal_invoice_100" come from and what does it mean?
Please post the SQL statement of the query you are trying to use.
Microsoft Office/Access MVP
Microsoft IT Academy Program Mentor
http://micro...Sorting Data #5
Is there formula or anyway to be able sort the below data into a format that
I could create a pivot table on? I spend to many hours doing this every month.
Invoice #: 12345 Invoice Date: 1/16/1950 A/P Code: ABC
Due Date: 1/16/1950 Total Payable: $100.00 Reference: Freight:
Account #: 1234 Description: Name Reference 1 Amount: $100.00
Account #: 4321 Description: Name Reference 2 Amount: $100.00
Account #: 9876 Description: Name Reference 3 Amount: $100.00
Any help would be much appreciated!!
You need to show a Before and After version.
You still might not get any help, but your ...Importing leads and workflow
We are just implementing CRM and have a couple of lead lists that we
want to import (about 5000 records). The sales force would like calls
automatically scheduled when the list is imported and would only like
50 calls scheduled per week. I know that I can assign leads based on
various criteria to the correct salesperson. However, is there any way
that I can create the phone activities and only limit to 50 per week?
Does workflow look at the salesperson work schedule at all or will each
sales person have 1000 phone calls scheduled for 3 days from when I
There isn't anything in ...Filter recordset using query results
I have a form based on a query called [qry Quarterly Planning], it lists all
Itineraries on the system. On this form you can filter records by specifying
a Start and End Date for the [ReviewDate] and/or [Specialist]. It is a
subform on a main unbound form, lets call this Subform1. Along side this I
have another subform (Subform2) which displays ReviewDates that exist
against an Itinerary. In other words Subform1 has a start date of an
activity and if the activity lasts longer than 1 day, then the additional
dates are stored in Subform2 (ItineraryDates). Currently when I...How do I use traffic lights in excel
I am wanting to use traffic lights in excel that change colour based on the
result of a variance cell, ie if the result of the cell is 10 make the
traffic light green, if it is 20 make the traffic light amber, if the result
is 30 make the traffic light red. How do I do this?
Format>Conditional Formatting>Cell Value is:
Note: you can add up to 3 conditions(4 if you count default)
Gord Dibben Excel MVP
On Wed, 22 Dec 2004 16:35:03 -0800, Shorty <Shorty@discussions.microsoft.com>
>I am wanting to use traffic lights in excel that change colour based on the
&g...HELP! remote data not accessible msg
I have a use who is currently using a Bloomberg DDE add-
in. Whenever he attempts to activate the add-in to
retreive remote data, the system hangs. If I go to task
manager, I then see a message stating "Remote data not
accessible. To access this data Excel needs to open
another program.... I have searched the knowledge base
and didn't find much help. Does anyone have any ideas? I
am desperate!!!! We are currently using Excel 2003 in XP
...Newbie Question: Using Web Services
I've been trying to implement Infopath with CRM with no success. I've
tried the example, http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnmbscrm1_2/html/mbs_crminfopathcrmintegration.asp,
to no avail. I have followed the example to the letter, but find the
information about publishing the Web Service to the server to be
somewhat lacking. Admittedly, I am not a programmer, and I am
continually running into an error in line 54:
Has anyone else ...Upgrade CRM 4.0 Professional to CRM 4.0 Enterprise
When I enter the CRM license code in the Deployment Manager to upgrade to
Enterprise I get a message "The license code entered is not valid for
upgrade. Make sure you have entered the license code correctly, and then try
again". Do I have to reinstall CRM 4 to install Enterprise?
what is your current installation? Professional?
Have you entered trial version license keys ?
Current is Professional. I got the key from our MSDN subscription which
didn't indicate a trial license. I was able to install the Enterprise edition
on a test server using the same key w...McAfee 8.5.0i on access scan slows down MS Dynamics CRM web client
Our organization's McAfee 8.50i slows down MS Dynamics CRM v4 - on premise
web client considerabley when loading forms and data.
Besides completely disabling McAfee, does anyone know how to configure
McAfee (or configure CRM) to ignore CRM related form and data loads.
When disabling the oncaccess scan, or when disabling the scriptcan - it
improves lookups from 8-9 seconds to 4-5 seconds.
However, the organizatin policy is to have these enabled.
What to do?
We have the same behavior, and went we reported to Microsoft says that no
solution has, then we buy and install Microsoft Securi...[b]Can I download Excel data to a MS Access database?[/b]
I've built an Excel 2002 form that I want our internal customers to
access from our intranet, and use. Once completed, they will send it
to us as an e-mail attachment. I'd like to be able to open it, and
somehow download the data from the form into an MS Access 2002
database I've built (so that we don't have to rekey it into the
Is this possible or even feasible? Any and all help is appreciated.
Message sent via www.excelforums.com
in Access check 'File - Import External data'
"...Outlook freezes after sending one email after upgrading 4.0
We just upgraded from 3.0 to 4.0 this weekend. All client machines have had
the desktop client upgraded and 2 have the same issue. One is XP with Outlook
2003 and the other is Vista with Outlook 2007. Open opens and the CRM addin
initializes correctly. As soon as you compose and send an email, Outlook
locks up and you have to kill the process in task manager to close Outlook.
I've had the same problem and have tried all I can think of...how did you fix
> We just upgraded from 3.0 to 4.0 this weekend. All client machines have...CRM tools
I'm working with CRM, and i listening about many tools that i didn't
find. Example CRMDiag and more patches that repair a lot of knowed
errors and warrings. Anybody know an url to download them?
If you have any problems with your CRM deployment you can issue a support
call to Microsoft Dynamics. They will supply you with these tools if this is
needed to resolve the case.
Merijn van Mourik
> I'm working with CRM, and i listening about many tools that i didn't
> find. Example CRMDiag and mor...How do I merge cells with multiple data values?
I've tried highlighting the two cells which are in the same row. It
suggested that I format and align. Both of which I've tried. I keep getting
the same error message, "The selection contains multiple data values. Merging
into one cell will keep the upper-most data only." I need to make the cells
one with all my information. Is this possible?
Not knowing what you want to do, let me make a suggestion. Put all your
data into the first cell and leave the second cell empty. Select both
cells. Click on Format - Cells - Alignment tab. In the "Horizontal" b...Import from Eudora 6 to Outlook 2003
I am trying to import messages from Eudora 6 to Outlook 2003. I am receiving the error message "The mail folder could not be opened. If another application is using this file, please close and try again.
No other applications are running
Thanks for any help
see article 257354 of the microsoft knowledge base on
"Outlook Cannot Import Eudora Messages When Eudora Mail Is
Stored in a Non-Default Location"
>I am trying to import messages from Eudora 6 to Outlook
2003. I am receiving the error message ...Using Visio HTML output within frames
I want to include visio HTML output in a frame of another html file.
Unfortunately it is not working.
I understood the problem is in vml_*.htm files. It is due to, the
target arrtibute(pointing to _parent) in v:shapetype tag and
href attribute (pointing to #) in v:shape tag. These attributes should
point to "_top" and "<target-html-file>#" respectively inorder to work.
I want to change these options while saving .vsd as web page?
I would appreciate if you can help me in this regard.