Lost Active Directory for Microsoft CRM 3.0
Hi, We recently had a server failure on our Domain Controller which was
unrecoverable and our backups for active directory failed to restore.
The CRM database and application are on a seperate server so is fully
intact. But we have lost the AD, which means no access.
My question is what is the best method if any to recover the CRM system?
I was hoping in version 3.0 this is possible as i know 1.2 was a nightmare
due to the security descriptors.
Am i able to reinstall and attach to existing database and apply CRM
You're in luck, this shouldn'...Too Many IF Statements Nesting Error (Excel Formula Loop w/o VBA)
Hello Excel Problem Gurus,
First of all, let me thank you in advance. I find it exemplary that
you all can devote time to helping others who are having issues with
their work. Hopefully one day I can be at a mentor level, and help
Hope you can help! I have an issue where I don't know how to write the
formula that I need without going over on the nesting. The current
formula that I have is as follows:
Data",IF(V7="Yes",&qu...Office 2003 on WinXP is receiving an error...
This operating is not presently configured to run this application.' This
nmessage keeps popping up after I install WInXP Sp2. Right after I install
office 2003, and I try to open MS word 2003, the above message appears. Can
anyone point me in the right direction?
Insert office cd>repair
"RodneyJ" <u58446@uwe> wrote in message news:a43130535cd3e@uwe...
> This operating is not presently configured to run this application.' This
> nmessage keeps popping up after I install WInXP Sp2. Right after I
> office 2003, and I t...Statistics Creation on SQL 2005
My db has "auto create statistics" on. For some reason, there are quite a
few indexes that don't have statistics.
What could be the cause?
Thanks in advance
Sorry about the bother. I got my answer.
"auto create statistics" proces only creates statistics if columns are found
in where clause.
> My db has "auto create statistics" on. For some reason, there are quite a
> few indexes that don't have statistics.
> What could be the cause?
> Thanks in advance
> My db has "auto...Showing 0 after decimal with ROUND
I'm using the ROUND function like this:
=ROUND(C29*(92%),1) &- ROUND(C29*(108%),1)
Unfortunately, if the numeral after the decimal is a 0, then it doesn't
display. How can I force a 0 to display after the decimal?
Format the cell as Number with 1 decimal place - it would appear to be
formatted as General.
Hope this helps.
On Dec 4, 1:44=A0pm, Libby <Li...@discussions.microsoft.com> wrote:
> I'm using the ROUND function like this:
> =3DROUND(C29*(92%),1) &- ROUND(C29*(108%),1)
> Unfortuna...Errors saving to network drive
When my users open an Excel spreadsheet located on a
network drive, make their changes, and then try to save
the spreadsheet, they get an error message saying "Your
changes could not be saved to Whateverfile.xls, but were
saved to XXXXXXXX ( 8 digit hex number ). Close the
existing document, then open the temporary document and
save it under a new name"
The users have been explicitly granted full rights,
including Delete and Modify, to the shared folder in
which the spreadsheet resides.
I have disabled their Symantec Antivirus realtime
protection for the time being.
This pr...Re-install Outlook 2002
I am trying to re-install Outlook 2002 for my palm pilot
after a crash. The installation will run until I get the
message - "another version is already installed and must
be uninstalled". The previous version was corrupt and I
was unable to uninstall it. Now when I go into the control
panel to add/remove the uninstall is no longer in the
...crm consultant needed asap
i am looking for a crm consultant who has a lot of experience with form customization, crm implimentation, heavy work flow, and activities. ideally someone in arizona but not required. telecommute will be considered for the right person. looking for someone for a possible 2 month (i am guessing here....) project. if you are available and have this experience please email me at email@example.com (remove the -). we are looking for someone to start like next week at the latest (this message was posted 08-08-2004).
This message was posted 8/4, not 8/8.
And I have some swamp land in f...CRM Outlook Client Configuration Wizard Problem
CRM 4.0 - Microsoft Outlook Client
We've Microsoft CRM 4.0 Server roll up 8 as well as CRM Outlook Client on
the same roll up version. Our Internal Web Access works without problems
users get to it and they're automatically authenticated. IFD Development is
the same way except they're prompt through a login page for their username
and password when they're coming from an external network.
Ever since we moved to a new facility users are experiencing problems
connecting to CRM using their outlook client, I have a test machine where I
have the CRM Outlook Client ins...Outlook 2007 Install gone wrong
We recently switched e-mail hosts and I successfully (mostly) switched over my company's accounts from a POP server to our new IMAP server.
But I'm trying to set up one more account and am running into issues. I put in all the same settings as for our other accounts, but it won't allow me to create or copy any sub-folders into the InBox folder for this account (it tells me it cannot and this is "probably due to a limitation of your imap server")...but I can do so for the other accounts on the same server.
Also, when I try to view the Imap Folders, it says "The...product key #4
I have a product key for microsoft office which I purchased for my pc
several months back. I am now trying to use that same product key to
register office on my mac (office was pre-installed). Where do I
enter in this product key in the mac office trial software in order
for me to get full access?
In article <firstname.lastname@example.org>,
> I have a product key for microsoft office which I purchased for my pc
> several months back. I am now trying to use that same product key to
> register office on my mac (office was pre...Congratulations! This has been a MEB-free newsgroup for 4 weeks.
We all deserve a pat on the back. This has been a MEB-free workplace
for over 4 weeks - practically the entire month of June.
As Microsoft turns off it's usenet server and removes this newsgroup
from it's server, we have seen the last of Maurice Edward Brahier and as
this group continues to exist outside of Microsoft we will never again
see him post to this group. The fact that he has been a fraud and not a
real user of Windows 98 for many months if not years probably has
something to do with that.
His incoherent and rambling posts, written in a particularly obtuse form
...Office installation and Windows 7
I got a new computer today with Windows7. It is a 64bit system where I had 32
before. I tried to install my Office Professional 2007 and it would not
install. I got a message that Microsoft would check the problem and get back
to me, then another message that the program was shutting down. I am in
school and really need my Office. Is there a way around this so that I can
get it installed?
Doesnt make any difference, 64 / 32 bit.
Does your new PC have a Trial Version of Office & Activation Assistant that
you failed to uninstall first, then rebooted?
"Linda...cell contents revert to 0 when i click on the next cell
I put a number into a cell click on the next cell and the first cell reverts
to 0. If I format to number with 2 decimal places it will be ok but when I
try to take out decimal places it goes back to zero,
You haven't said what number you are trying to put into the cell, but I
suspect that the number is less than 0.5.
A quick test shows that if you set the cell to no decimal places then enter
a number less than 0.5 it is displayed 'rounded down' so it will show as
zero, if it's 0.5 or above it displays as 1.
If you need to put numbers less than 0.5 into youe c...Error loading XML into DataSet
When I try to load this xml file (see below) into an asp.net dataset
using the following code:
I get the following error:
"The same table (description) cannot be the child table in two nested
If I take out the anchor tag in the description it works fine,
however, I need the anchor tag in there. Does
anyone have any suggestions?
<?xml version="1.0" ?>
<link>http://liftoff.msf...SQL Server Connection Failed
Hi everybody, this is my scenario:
1. Windows Server 2008
2. WSS 3.0 + MOSS 2007
3. SQL Server 2008.
i'm having this problem: "Login failed for user 'sa'. Reason: An error
occurred while evaluating the password. [CLIENT: 22.214.171.124]".
in this momment i can't see any application from sharepoint. somebody knows
how can i do?
i don't change the sa password. i don't change anything in the sharepoint
configuration. since two days ago i'm having this problem. pls, is very
urgent, because i have to deliver this server the next monday to the...Configure Microsoft Dynamics CRM for Outlook
While trying to configure Ms CRM for outlook throws an error message HTTP
Status 401: Unauthorized.Can anyone put me out of this issue.
...Run time error 5 : HQClient
When I double click HQ Client I have message box "Run time error 5 : Invalid
procedure call or argument"
how should I do? I used RMS 2.0
This post is a suggestion for Microsoft, and Microsoft responds to the
suggestions with the most votes. To vote for this suggestion, click the "I
Agree" button in the message pane. If you do not see the button, follow this
link to open the suggestion in the Microsoft Web-based Newsreader and then
click "I Agree" in the message pane.
http://www.microsoft.com/Businesssolutions/Community/NewsGr...LNK2001 and LNK2019 errors with template class
This is a multi-part message in MIME format.
I have a smart pointer class that uses template functions that works =
fine under VC6 but it not linking under VS2005.
1>TestGridToolkitView.obj : error LNK2019: unresolved external symbol =
"void __cdecl PrismGCSmartPointer(class CPrismSmartPointer<class =
CDialog> &)" =
referenced in function "protected: __...Installed Font does not display in Word 2007
Only 6 of of 8 recently installed TTF fonts will display in Word 2007
Are the missing ones variants like Italic or Bold?
On Dec 25, 1:28=A0pm, GWHA <G...@discussions.microsoft.com> wrote:
> Only 6 of of 8 recently installed TTF fonts will display in Word 2007
...Removing spaces from text #4
I'm in excel and i have a bunch of text data that has an extra space at
the end of the text on the right hand side for each cell. Is there any
easy way to remove this space?
Use the TRIM() function.
"lj" <email@example.com> wrote in message news:firstname.lastname@example.org...
> I'm in excel and i have a bunch of text data that has an extra space at
> the end of the text on the right hand side for each cell. Is there any
> easy way to remove this space?
I tried using that function but the results st...on Writexml error
(Type your message here)
I have a XML file as a datasource. I read that file using dataset.readxml.Then in that dataset I make some changes. Now I want to write that changed dataset by overwriting the file that was created initially.
I someone please tell me how to do it.
From: ratnesh gupta
Posted by a user from .NET 247 (http://www.dotnet247.com/)
...Excel error 1706
Whenever I try to start excel on my computer it displays
an error message and it shuts itself down, any other
program from the office pack works properly, except for
the one I mentioned. I reinstalled it and it does the
exact same thing.
Thanks in advance.
...Error with Bold
Range(Cells(1, 1), Cells(1, 2)).Font.FontStyle = "Bold"
Take a look at the activesheet. I bet that range is bolded.
But if you want Recent to be the sheet with the change, add a couple of dots.
.Range(.Cells(1, 1), .Cells(1, 2)).Font.FontStyle = "Bold"
Without those dots, the range refers to the activesheet (if the code is in a
> What's wrong?
> With Worksheets("Recent")
> Range(Cells(1...ANN: Optimizing the Performance of Microsoft Dynamics CRM 3.0 white paper
the White Paper "Optimizing the Performance of Microsoft Dynamics CRM
3=2E0" is now available: