routing issue #2
we have two routers,
one is attached to an ISA server which is used mainly for the internet
one is attached to the exchange server which is used solely for email
the exchange server is sending mail throo the ISA router server - how can i
make it use the
exchange router ? - the IP of the ISA router is showing in the email headers
I presume the default gateway of the Exchange server is the ISA router?
Therefore it will always route through it.
This is all theory, as I haven't got the time to test it at the moment:
Add another IP to your Exchange server, which DFG is the r...Detail Tax Collected and Tax Analysis report totals should match
The 'Detail Tax Collected' and 'Tax Analysis' report totals do not match. We
know the reasoning is that the 'Tax Analysis' report rounds the totals, which
causes the two reports to be off by just a few cents to sometimes a few
This post is a suggestion for Microsoft, and Microsoft responds to the
suggestions with the most votes. To vote for this suggestion, click the "I
Agree" button in the message pane. If you do not see the button, follow this
link to open the suggestion in the Microsoft Web-based Newsreader and then
click &...=?iso-8859-1?Q?=22microsoft_office_document_imaging=22_documents=3F?= #2
Is there a program available for Mac that can
read "microsoft office document imaging" documents?
I have a number of email attachements sent to me
with "filename.mdi" that I need to open
Can they be opened on a Mac running OS X?
...Budgets - Bills - Reports
I have a recurring bill that appears in my budget in the correct category –
with the monthly expense of $9.95 and M07 shows that it has budgeted $9.95 to
pay for that bill. When I look at that category in several reports, the
reports show that I have $0 set aside for that category, and that I am
overspent in that category by $9.95.
Can anyone help explain how/why budgets and bills seem to have a
relationship, but this relationship does not carry over into the actual
I have typed in all of my bills into the bills section. For simplicity, I
will only tal...Report by Sales Rep
RMS should have a report that lets you see the items a sales rep has sold
for a given time period.
Or does that already exist and I can't find it?
<email@example.com> wrote in message
> RMS should have a report that lets you see the items a sales rep has sold
> for a given time period.
> Or does that already exist and I can't find it?
"Rob" <rob@retail...User Access Reporting
Does anyone know of a better way to audit security for individual users that
the User Security report? Even with the options set to include Accessible
Items only, we're finding the report for a single user runs well over 100
pages. With that kind of bulk, both the generation and review of the reports
becomes a major endeavor.
We're currently using GP9, with plans to go to 10 this year.
Have you looked at the Rockton Software add-on called Security Auditor?
I think it will do everything you are looking for and more.
&q...Print button on Report form
Hi all :-) =20
Access 2007 Pro Plus, Vista Ultimate SP2
I am preparing a small app for a friend who is handicapped, and am =
trying to make things as simple as possible for them to use. I am trying =
to limit the number of functions and clicks necessary to accomplish =
tasks as much as possible, and would like to try an idea.
I want to add a small button on the report form that will print the =
report when clicked. I have done this on display forms to print as a =
report, but, not on a report form. In trying to add such a button to the =
report form in 2007 I am not being offered...Importing Leads 05-05-05
Is it possible to attach a note through the lead import process?
No this is not possible. You would have to write your own custome Lead
import utility to do this.
Microsoft CRM MVP
"astuartmills" <firstname.lastname@example.org> wrote in message
> Is it possible to attach a note through the lead import process?
Or, you could create a workflow rule that created a note whenever a new
lead was created. (You could modify the condition of the rule to
specify a ...how to insert chart for imported data in a report?
plz reply soon if you know
Please use the large white space under the subject to enter a detailed
question. It also helps to read some past threads that might pertain to your
question (whatever it is).
Microsoft Access MVP
"varsha from pilibhit" wrote:
> plz reply soon if you know
...Money Reports #3
I was wondering if anyone could tell me why MS Money counts credit card
payments from my checking account as income?? Does anyone know how I
can fix the problem?
In microsoft.public.money, jagpit wrote:
>I was wondering if anyone could tell me why MS Money counts credit card
>payments from my checking account as income?? Does anyone know how I
>can fix the problem?
Use a single Transfer transaction from bottom of the list under
SPECIAL. This assumes you are using "Advanced" register setting.
"jagpit" <email@example.com> wrote in message
news:11...Date format problem #2
Please suggest me the solution of my problem,
as i m handling data for 60,000 in no.Some body in data
entry has enter the date in a cell in gernal format e.g
20.03.2003 tht is 20th march 2003, i wnt to convert in the
date fomat,like 3/20/03.. i tried ..but i failed to tht
please suggest some alternative solution for tht..becoz it
is not possible to do it mannually
waiting for the response
Try using Data/Text to Columns. and assign the information as a date.
"Nishant" <firstname.lastname@example.org> wrote in message
news:090201c37ce0$1b...Pivot table sorting #2
I have a pivot table report for partnumber and values. This report is based
on a database containing details like
total value... etc.
In my report i would like to sort the table in descending order of total
value. I have tried advanced option by double clicking the total value
field and changing the autosorting option to descending(total). But i am
not getting the required result.
My version of excel is Microsoft office excel 2003.
Pivot table report is given below
...convert time into decimal #2
the formula above where E40 is the time now, and E44 is the time of 2 hours
ago. I want to return 2 instead of 2:00 PM. How do I do this? I do this
but it does not work (E40-E44)*24.
...comapring 2 seperate workbook
HELP!!! Is there any way you can compare 2 workbooks. for example,
would be looking for a match (of values) from single columb o
workbook 'a' to values of single columb from workbook 'b'. When eve
there is a match between these two, maybe I can write it on ne
workbook?(automatically). Or if there is any other tricks, please le
me know. (I am sick of comparing it maually and when there is a match
I am cutting and pasting to new workbook)
Message posted from http://www.ExcelForum.com
as a starting point have a look at:
http://www.cpearson.com/excel/duplicat.htm#Ex...CRM 1.2 SBS 2003 Can not install exchange email router
Logged on as domain admin throughout.
Installed CRM successfully, followed install instructions, did not install
to local host installed web to a hostheader of "companyweb" port 80.
during Exchange email router setup I get an error when specifying CRM
server and web - "one or more os the MS CRM servers you listed is invalid or
you do not have administrator priveleges on that server...."
server name: sbssrb01
If I go into IIS can not open CRM web get - http Error 403 - Forbidden:
Access is denied.
All services are on 1 server "sbssrv01&qu...arrow keys #2
To move from cell to cell, I used my arrow and enter
keys. They no longer work in Excel. I have to click on
each cell to get there. Do you know how to fix it?
What happens when you use the arrow key? Check if your scroll lock is on or
you have something under tools>options>transition
"Shirley Smith" <email@example.com> wrote in message
> To move from cell to cell, I used my arrow and enter
> keys. They no longer work in Excel. I have to click on
> eac...pie charts #9
How do I surpress the numbers from showing on a pie chart and just show labels?
Select the pie, not the whole chart, and right click it, select Format Data
Series ..., Data Labels tab, and select from there.
(there's no email, no snail mail, but somewhere should be gmail in my addy)
"Sara" <Sara@discussions.microsoft.com> wrote in message
> How do I surpress the numbers from showing on a pie chart and just show
...Inbound email statistics/reports/monitoring
I'm looking for a way to monitor my exchange server's inbound email so that
I can get a list of the biggest spammers. At the moment I am getting spammed
by 10K+ undeliverable messages a day so I want to figure out who the more
persistant servers are and block future messages. With this much activity on
my server I am worried that it is degrading the performance.
I know most of you would tell me to RTFM but I think this is the quickest
way for me to get help while I work on other issues.
Thanks for your help,
What version of Exchange? If you're not running Exchange ...Workflow not working 06-09-05
The workflow we have created has suddenly stopped working. In the event
viewer I get an error stating the user does not have a license. I have
concluded that since the person who created the workflow rule no longer has a
license, the workflow is not working. However, I do not wan that person to
have license, he no longer uses CRM and we need the license for another user.
Is the way to assign workflow rules? Or some other workaround for this?
To solve this I went into the database and changed the user context field in
the worklfow tables.
> The work...any one have a clue how to sync 2 copies of outlook
laptop and desktop I want to sync up the outlook on both.
Have a look at www.slipstick.com/outlook/sync.htm or at my signature for a
Synchronize and backup Outlook
...Custom Format #9
Done a bit of Googling but no luck so far...
What I need to do is create a Custom cell format for the following:
Where the x's are any letter and the #'s are numbers. For example, if the user inputs:
The Cell will automatically be formatted as:
Can this be done?
Not by using number format. (Number format works with numbers--not text.)
But maybe you could use a helper cell to translate it:
Upper(LEFT(A1,6))&RIGHT(REPT("0",8)&MID(A1,SEARCH("-",A1)+1,2...Report printout is not WYSIWYG
I have a favorite report setup to printout my current months checking account
register. This is the only report I ever print. Every time I print it, it's
like pulling the handle on a slot machine...I never know what I'm going to
I skinny up the columns so I can print it portrait mode, sometimes it works
flawlessly, others I have to print, and then adjust the columns to get it to
fit, and then print again. Today, I did all of the above and it still prints
Where are the settings for this report kept? More importantly, why are they
...Close button on Crystal Reports page
When an ASP.Net application produces an embedded Crystal Report, if the
Crystal Report is in fullscreen mode is there a way to put an Close button on
the Crystal Report so that when the button is clicked the Crystal Report will
close and the application screen behind it that called it can be visible
...Joining Win 7 to SBS 2003
I've joined a windows 7 professional 64 bit client to an SBS 2003
Premium server...it joined fine, as far as can be seen, except for 2
- The User Account Control window pops up on each login showing, "Do
you want to allow the following program to make changes to this
computer" and the program is, "Windows Small Business Server 2003 with
Service Pack 1" I've tried clicking "YES" several times and each
reboot brings up the same question.
- Offline files doesn't seem to be setup. I've had this issue before
when joining computers...Oulook & 2 exchanges (!)
Quick question I hope
We have two sites, different domains, two Exchange servers, vpn
connection between them (not set up yet)Is it possible to set up outlook
so that it read mail from both domains?
Use two profiles.
Milly Staples [MVP - Outlook]
Post all replies to the group to keep the discussion intact. All
unsolicited mail sent to my personal account will be deleted without
After furious head scratching, Stormy asked:
| Quick question I hope
| We have two sites, different domains, two Exchange servers, vpn
| connection between them (not set up yet)Is it possible to s...