Reporting from Project Server
I dont know if i need to ask this question here or in the Access section. I
have an ODBC connection to the Project Server database so I can make reports
through Access. Access' limit of 255 fields per table is causing me some
trouble. for example, the MSP_VIEW_PROJ_PROJECTS_ENT table has well over 255
fields. Access only shows me the first 255 fields. how can I change that so I
can see all the fields in that table?
I have not tried this yet it may be a viable option. Have your DBA create a
view that pulls the key fields to this table and the specifi...Microsoft CRM 3.0 Installation 11-08-07
Good Day board,
Quick and to the point. I'm installing a trial copy of Microsoft CRM 3.0
that I got at a computer conference recently and I've gotten everything
to work in the System Requirements dialog except that it's telling me
that "The minimum required version is SQL Server 2000 SP4 (8.0.2026)".
Strange this is that I do believe that I have SQL Server 2005 installed
on the machine.
Any idea how to be absolutely sure of what version I have installed?
Have you choosed the right name of SQL server during installation set-
You have to make it sure if it is ...Outlook 0x800ccc0d error when Norton e-mail protect enabled: see hosts
This post is made to help others solve this issue, based on my
- Outlook works perfectly well when Norton Anti-Virus e-mail
protection is disabled
- Outlook cannot retrieve incoming messages when NAV e-mail protection
is enabled, message being: pop3 server not found, error 0x800ccc0d
This symptom, and possible solutions, are exactly the object of
Symantec support note:
Please read this note first ! The object of this post is to add
another possible solution to this problem.
NAV email protection sets up...Document Viewer installer error
I recently ran CHKDSK /F as this was prompted when I attempted to run defrag
etc. Since the chkdsk was run, when I turn my PC on, I receive the following
"document viewier - installed encountered an unexpected error - error code
2908". I click run, the same error just repeats and loops. The only was I can
remove it is to end task via task manager.
Any ideas how I can correct this error?
I was wondering if anyone knew of any web based email provder that I
could use that wont be bloked but the I.T Filer at my work. I require
use of emails during the day for personal use but work emails are
monitored. I have tired various sites i.e Hotmail, Yahoo, Gmail, lycos
etc but they are all blocked. Does anyone know of any that may not be
picked up buy the web filer.
It is difficult to answer because it depends on what your filter is and how
it is monitored. For instance, if it is actively monitored and somebody
found out you were accessing the site, then it coul...CSV Files and VLOOKUP error
Does anyone know why VLOOKUP and Compare formulas don't work o
information originating from a CSV file? I've tried copying an
pasting values only (to leave behind any formatting), but it doesn'
Through countless tests, I've narrowed it down to the CSV file bein
the only possible cause
Message posted from http://www.ExcelForum.com
Just a guess but the imported data may have leading or trailing spaces or
are numbers stored as text. You could use the formula =A1=D1 to see if you
get a true or false, where A1 is the lookup value and D1 ia the CVS valu...will CRM load on a 2003 server?
will CRM load on a 2003 server?
Microsoft CRM v1.2 supports Windows 2000/2003 Server.
>> Other Microsoft CRM Online Forum Resources:
>will CRM load on a 2003 server?
No problem. We just completed a 1.2 installation on a 2003 server, without
"Troy Hicks" <firstname.lastname@example.org> wrote in message
> will CRM load on a 2003 server?
CRM 1.2 will also load on Small business server 2003 as wel...Cannot open Outlook, keep getting Send error report of Microsoft.
We are having problems with Outlook 2003. Everytime we
try to open, we get this: Send error report to Microsoft.
Any ideas why? All windows and office update have been
...Uninstall of mappoint has caused errors with excel
I am running Office 2003 on the terminal server (windows 2003) and had a
copy of mappoint as well. This is a mapping program. We ininstalled
mappoint which has caused an error message with Excel and other office
products. The error says "Cd:\documents and
settings\administrator.ocrdc1\application data\microsoft\addins c:\Program
files\common files\microsoft shared\geography\mpoai9.dll is not a valid
add-in." I then click OK and excel opens up and everything is fine. The
problem is that we are using other programs as well such as Quickbooks that
export to excel and t...Unknown error from CFtpConnection::GetFile()...
I'm having intermittent problems with CFtpConnection::GetFile()...
99% of the time GetFile() succeeds but occasionally it fails and returns
FALSE with a GetLastError of 0x2EFF (12031) which I can't find
Anyone know what this error means...? Where it is defined...?
A bit of searching on on the web seems to suggest; "The connection with the
server has been reset."
Can anyone confirm this...?
Andrew Kilgore wrote:
> Hi all,
> I'm having intermittent problems with CFtpConnection::GetFile()...
> 99%...Error 550 Relaying denied
I get this nearly every time I try to send information
using MS Outlook email. Any suggestions?
You probably need to turn on authentication to your outgoing server. You
can do so on the "Outgoing Server" tab for your mail account.
MVP - Outlook
*** Messages sent to my e-mail address will NOT be answered -- please
reply only to the newsgroup to preserve the message thread. ***
Dick Brenneke wrote:
> I get this nearly every time I try to send information
> using MS Outlook email. Any suggestions?
Th...learning Excel #3
I was considering learning Excel as an additional tool for my data analysis
Is it better to use data sets that I have previously used with SPSS and
apply the same analysis tools as in SPSS? For applying the appropriate
tools, I was considering using excel's online help.
The second option I have is to use some excel book for data analysis and
apply the techniques to data sets provided with the book.
...CRM and Outlook Integration 07-22-03
I haven't seen a whole lot of great documentation on this - so if someone
knows where some exists then please tell me - but I'm curious as to how
featured the Outlook/CRM integration is? I see there is an addin for Outlook
that gets installed, but it looks to me like it's nothing more than a
synchronization tool between Outlook and the SQL Server - am I right? It
looks like it syncs Contacts, Emails, Calendar dates, etc.
I've looked through the SDK documentation and I've browsed a couple posts,
but none really say outright in exactly what way does Outlook and CRM
...I cannot get Outlook to send/receive. Error says object not found
I just installed Outlook2007. I cannot get the send/receive to work. That is
when the error says Object not found. If I go to accounts and properties, I
run the two tests and they complete fine. What should I try next? Outlook
2007 is the only new program, all the rest are from Office 2003
IMK <IMK@discussions.microsoft.com> wrote:
> I just installed Outlook2007. I cannot get the send/receive to work.
> That is when the error says Object not found. If I go to accounts and
> properties, I run the two tests and they complete fine. What should I
> try next? Outlook 2007 is ...Installing Active Directory connector?
We are installing a 2003 exchange on a 2003 server in a
2000 domain. We also have a 5.5 sp4 machine running on
2000 sp 4, and once 2003 is installed, we are going to
move the mail boxes from the 5.5 machine. My question is,
do we have to install the active directory connector on
the 2000 Domain server, or could we install it on the
> We are installing a 2003 exchange on a 2003 server in a
> 2000 domain. We also have a 5.5 sp4 machine running on
> 2000 sp 4, and once 2003 is installed, we are going to
> move the mail boxes from the 5.5 machine. My q...number format with leading 0
Dose anyone know how to create a number format that would show a leading zero
for the numbers 0-9. That is, so that 1 would show as 01. I can do with a
text format but would like to retain the integrity of the number.
Does that help?
> Dose anyone know how to create a number format that would show a leading zero
> for the numbers 0-9. That is, so that 1 would show as 01. I can do with a
> text format but would like to retain the integrity...HOWTO: Customizing CRM
We would like to customize our CRM Opportunity form. We want to
include a OpportunityNumber field, which will be auto-generated when
the new opportunity is created, similar to auto-numbers for Contracts,
Cases, Articles, Quotes, etc. Is it possible and how do we go about
I've looked at CRM Deployment Manager. It's possible to create a
simple custom Attribute for particular object. But I couldn't figure
out how to make it an auto-generated number, like SQLServer
Identity... Could I just modify OpportunityBase table in MSCRM
database? Do I need to change METABASE databas...CRM menu is dim
The "CRM" menu pad in my Outlook client is dim (disabled). Does this mean my
CRM 3.0 client is not functional.
I got the message following message after installing the 3.0 client for
"An error occurred loading Microsoft CRM functionality. Try restarting
Microsoft Outlook. Contact your system administrator if errors persist."
Many thanks for anybody who can help.
Most of the time, in my experience, this means that it cannot connect to the
Do you have a connection to the CRM server? Try browsing to
http://<yourcrmserver>/mscrmservices/20...Viewing group calendars in CRM
I was wondering if it is possible to view other
employees' activities and appointments in MS CRM? I know
this feature is available in Outlook 2002 and higher
through group schedules but I have a client running
Outlook 2000 wanting this cabability.
No, you can't. not sure if next version will have it. there is an
ISV, http://www.ssyh.com/products_ssyh_MSCRM_GrpCal.html that has
developed a group calender.
we have found this useful for those migrating from Goldmine.
I have this feature implemmented. If you are interested, contact me.
Vin�cius Pitta Lima de Ara�jo
&qu...How do I configure simple categories in the task application
I am using outlook 2003 at work and am thinking of using 2002 at home. I
want to simply configure the task view so that I can in one window look at my
tasks. Either filtering them so only one category shows, or by showing them
all and which category they belong to. Further I want to be able to check
off from this list similar to how you might flag messages in email etc.
Anyone familiar with how palm desktop works will know what I'm talking about.
If this is too much of a mouthfiul to explain then at least a link to a site
with helpful outlook howtos would be good. (Note- I hav...Reply To Email after installing CRM Outlook Client
After installing the CRM Outlook Client, when opening an email and selecting
REPLY, the current windows looses focus. I know this sounds minor but many
of our power users are in the habit of hitting REPLY and typing without even
looking at the screen. It is not until they look up do they realize that the
window no longer has focus thus everything they thought they typed now has to
Has anyone seen this and know of a quick fix?
Thanks in Advance
Have you resolved this?
I have the same problem, and it is VERY annoying.
"Kenneth Clebak&...Error 130
Hope someone can point me in the right direction.
OSX 10.63, MacOffice 2008 12.2.4
When I try to connect to the following news server ( that doesn't require a
user name or password ) I get the following error when attempting to
download the List of Newsgroups:
"Too many connections in your class - Could not receive the Newsgroup List -
ERROR 130 "
Any pointers much appreciated.
Using Msnews servers works fine.
Remove usual to reply direct.
On 4/27/10 10:49 PM, in article 59bb7979.-1@webcrossing.JaKIaxP2ac0,
"We...how do I add error bars to a 3D chart in excel?
The help states you can only add error bars to data series in 2D area. Is
there a way to add them to a 3D chart?
I would not have thought so. Obviously as it is not a built-in option
the only way would be a work around perhaps using dummy series.
Unfortunately you can create 3d combination charts.
Stick with the 2d view.
> The help states you can only add error bars to data series in 2D area. Is
> there a way to add them to a 3D chart?
Andy Pope, Microsoft MVP - Excel
I checked, and error bars are not offered for 3D ch...ERROR: 5.1.2 or other punctuation after the recipient's email address.
I am trying to send a email to a group address I created with 58 addresses
When I try to send the email to this group I get the following Error:
"5.1.2 or other punctuation after the recipient's email address. "
I have gone back to the original contact cards and made sure the addresses
were all legal.
I have re-created the list, same problem
I have re-booted, same thing.
Any thoughts out there?
My wife and I have MBP's and are both running MS Office for Mac's, Entourage
Both of us have messages cued up in the out boxes th...Inactive records in the "Look up records" dialogue (CRM 4.0)
Due to "dirty import data" I have a lot of duplicates in my CRM
system. These have all been deactivated (but not merged) until they
can be evaluated and deleted.
Unfortunately, when I use "Advanced find" and use account name as a
criteria, *all* accounts show up in the "Look up records" dialogue box
- regardless of status.
Is there any way to ensure only active accounts show up in this
On Dec 4, 2:29=A0am, "maria.elmv...@gmail.com" <maria.elmv...@gmail.com>
> Due to "dirty import data" I have a lot of duplicates...