Subscript Out of Range Error
The workbooks and macros used are being created in Excel 2007, but saved in the
I have a macro that the boss will use to enter employees and place the
names, date added, and count (sequential) into a worksheet. It loops in case
there is more than one name to be added.
NOTE: The boss will be in workbook(QA Master.xls)
Once the boss is through entering names, the macro will then loop and create
a workbook, copying the Workbook("QA Template.xls") and renaming it with the
employee name that was entered.
I don't know why, but I am getting the fol...Stationery error message
I'm using Windows 7 with WLM 2009 (Build 14.0.8089.0726).
When I create a new mail message, I get an error "Unable to create this
stationery". The new message window open fine, with no stationery showing.
After I send the message, I check the Sent message and it has the stationery
I use showing in it. If I send the message to myself, the message also has
the stationery I use showing in it.
The Software Tailor
Las Vegas USA
...Money 2006 error msg when closing
I got a problem which I wish you folks here can point me a direction to get
it be repaired:
My money 2006 file is approx 60mb now as it first started from money 98. I
upgraded the program almost every year (may have skipped either 2001 or
2002, just couldn't for sure). Everything runs fine until today. The problem
is that if I was working in the Monthly Report page and wanted to close
money program and do the backup (the program is set to backup when it
closes), then an error message would immediate pop-up saying that money has
encountered an internal problem and needs to close, th...How to handle errors in EXCEL?
How should we handle the exceptions/errors in the Excel?
I am using the following code, but during running it gave some errors.
I wanted that if the error occurs during running, it would be handled
What extra piece of code I add in order to handle the error?
Any suggestion will be appreciated.
I am getting the error like:
a. File not found
b. Object required.
'This module checks you are in archivelog mode, and aborts the entire
'if not. No point in trying to perform a hot backup unless you are.
strFileOut...Run-time error 4605
I'm getting the following error when I close a Word form:
Run-time error 4605
This method or property is not available because the document is a protected
Thanks for any suggestions!
Are there any macros in the document/(template from which it was created)?
Hope this helps.
Please reply to the newsgroup unless you wish to avail yourself of my
services on a paid consulting basis.
Doug Robbins - Word MVP, originally posted via msnews.microsoft.com
"Complibr" <Complibr@discussions.microsoft.com> wrote in message
news:D9951B6E-9511-405E-...compiler error on c-code with mfc.
fatal error C1189: #error : WINDOWS.H already included. MFC apps must
not #include <windows.h>
I have an existing C-based application. I need to add encoder card
support to this application. Encoder card Skd is vc++ based. Hence I
ported the c-code into VC++. I wrote a class for encoder card (.cpp)
and included <afxwin.h>. The class itself compiles fine though when I
make a reference of this c++ class in the main (c-code), I get the
In the project options, I force a c++ compilation by /TP.
If I dont force /TP, I get the following error,
fatal error C1189: #error ...Unhandled Error in CRM V3
I receive the error "Server Error in'/' Application" when I open CRM in the
The left navigation area is visible. The error message appears in the frame
in with e.g. the activities are shown.
How can I solve this problem?
How can I get the source for this problem?
Do I have to repair the CRM server?
The fact that the left nav area shows up and the error is on the right side
indicates the web site isn't talking to the database correctly. What does
the rest of the error message say, and what does the screen show if you have
dev errors turned off?...Outlook 2003 error message #9
I just loaded Office Outlook 2003. Operating system XP. When I open it an
error message appears.
C:\PROGRA~1\HOTBAR\bin\451~1.0\SBOLExt.dll COULD NOT BE INSTALLED OR LOADED
I tried detect and repair and that did not help.
PLEASE, I need help
"Alan" <Alan@discussions.microsoft.com> wrote in message =
>I just loaded Office Outlook 2003. Operating system XP. When I open it =
> error message appears.
> C:\PROGRA~1\HOTBAR\bin\451~1.0\SBOLExt.dll COULD NOT BE INSTALLED OR =
> I tried detect and re...FRx errors with emailing reports
A customer is receiving error messages when emailing FRx reports - they
don't seem to affect anything, the reports are sent and received via email
and FRx doesn't close but with every report that they send, they get the same
message. "Drill Down Viewer has encountered a problem and needs to close. We
are sorry for the inconvenience." DrillDown Viewer closes, FRx remains open.
We have checked all of the settings to enable email, everything seems to
be OK and the reports do get sent, just an annoyance having the message pop
up every time. Has anyone seen this before...How can I generate a user friendly error message when validating XML against a schema?
When validating xml against a schema, the most frequent error I get is
something like "The 'FOO' attribute has an invalid value according to its
data type. An
error occurred at , (25, 913)". That error message is not very user
friendly, so I'd like to extract the data in the failing node along with its
parent node data, and show that to the user.
Do you know a way to do this? I don't think there's any other information
about the error position than the line number and position.
Yes, line number and position is the only information that you have to...Corrupt hidden object in Inbox prevents Activesync to WM5 with 86000108 error?
I have an Exchange 2003sp2 and a Windows Mobile 5 device (Treo 750w)
and I am having trouble synching my Inbox, getting the famous error:
"Activesync encountered a problem on this server. Support Code:86000108"
Calendar, contacts and tasks are synched without a problem, and when I
change the settings to exclude the inbox, I do not recieve an error.
After going through quite a few troubleshooting attempts, I think I
may have a problem with an object in my Inbox that Activesync is choking
on. But, even after emptying the Inbox of all content that I can see,
I'm still ..."can not create " error message
We have been experiencing this error message on terminal
server 2003. This is never being a problem on windows 2000
server but since we have upgrade the system this has
started. microsoft has give a solution KB 305982. It works
but problem reoccurs ever now and then.
Please help to resolve this problem
...Filtered Mode Copying and pasting as value yield as error?
While in filtered mode copying cell that consists formula and converting
them into values yield as following error.
Copy and paste area are not same so error.
Is there any code or macro that can convert the cell consisting formula into
Note:- The cell is in Filtered mode.
I had the same problem and this macro worked for me,
Selection.PasteSpecial Paste:=xlPasteValues, O...UNICODE error
vc++ 6.0, win xp
i am building a project with _UNICODE and UNICODE included in my
preprocessor definitions under project setting.
however, i got compilation error when i tried to called a function
which accepts UNICODE string as parameters:
here's my code:
CString sXslHeader ( _T("xml-stylesheet") );
wcslen( m_sXslHeader ),
...Synchronizing Error [8004010F-501-8004010F-0]
When synchronizing Outlook 2003 only when Outlook opens, some users
are receiving the following error in their Sync Issues folders:
10:01:56 Synchronizer Version 11.0.5604
10:01:56 Synchronizing Mailbox 'username'
10:01:56 Synchronizing Hierarchy
10:01:57 Error synchronizing folder
10:01:57 The client operation failed.
10:01:57 Microsoft Exchange Server Information Store
10:01:57 For more information on this failure, click the URL below:
10:01:57 http://www.microsoft.com/support/prodredirect/outlook2000_us.asp?err=8004010f-501-8004010f...404 Error in OWA when accessing calendar items in public folders
We are running Exchange 2003 SP2 on Windows 2003 Server SP1. We have a
front-end/back-end configuration. OWA works well except when attempting to
access calendar items in public folders. In personal folders, this is not a
The public folder calendar appears correctly; however, opening a particular
calendar item results in a 404 error about 2/3 of the time. Sometimes it
opens properly. Refreshing the item window repeatedly will eventually bring
up the item.
This problem is not restricted to a particular user, browser or public
folder. Even with full owner permissions on t...Error on server 2003 with EasyPDF
I am getting a random error that stops the pdf program on our server. Has
anyone else had this issue?
Run-time error ‘91’ object variable or With block variable not set
...safe mode only
my computer will only open in safe mode, i cannot even change it to safe
mode network and no internet .have run all kinds of checks and even went
back to settings for 3 days ago.
Maybe there are other newsgroups who are better for your question since this
is a newsgroup specific for Windows Live Messenger ;-)
And if you ask your question, you should give more infor like what kind of
operating system is running, which version, any errors and so on.
> my computer will only open in safe mode, i cannot even change it to safe
> mode n...Error Message when closing Outlook XP SP2!
Microsoft Outlook has encountered a problem and needs to close. We are sorry
for the inconvenience.
AppName: outlook.exe AppVer: 10.0.4510.0 ModName: mscorwks.dll
ModVer: 1.1.4322.573 Offset: 00052781
I have the error file if someone has a debugger of some sort!! Thanks! It is
called appcompat.txt.... Thanks!
...Clear outlook cach mode
Does there is any method to clear outlook cach mode by not go around to
client to rename or delete *.nk2 file as
I meant do not want to clear outlool cach mode by manual
the only other way is do it via a script - in a network, you can use a log
Diane Poremsky [MVP - Outlook]
Author, Teach Yourself Outlook 2003 in 24 Hours
Need Help with Common Tasks? http://www.outlook-tips.net/beginner/
Outlook 2007: http://www.slipstick.com/outlook/ol2007/
Outlook Tips by email:
email@example.com...error opening address book when adding an appointment
I have used Outlook 2000 before but when I loaded it on my new compouter that
runs Microsoft Vista I have been unable to add an apointment in the calendar.
I always get a message "An error occured when attempting to open the Windows
Adress Book. Unable to find the WAB DLL."
Excel and Word are working fine. I don't use Outlook for e-mail. And am
not trying to link the apointment with anyone else.
You are using Outlook 2000 in Internet Only Mode. It is not compatible with
Vista. You'll need to run one of the functional versions of Outlook.
...CHDKSK C: keeps returning error
running xp pro / sp3 / totally updated
a month or so ago, tried to run a chkdsk for C drive; as usual the computer
said it would be done at next boot.
but I keep getting an error message
"checking file system on c:
The type of the file system is NTFS
Cannot open volume for direct access
Windows has finished checking this disk ...
first of all, what would cause this? 2nd: why does it keep repeating every
bootup? 3rd: how to correct and get CHKDSK running again, or at least to
drop the error message?
"Torobi" <mishnu@velo...TWAIN error (TWCC_BUMMER)
I'm having a strange problem that has come up on a Windows XP Home
with SP2. It has a TWAIN scanner connected to USB. It comes up with
a TWAIN error (General failure. Source immediately unloaded.) This
error happens when the twain scanning applet is called from another
program. If I run the program at the command line it functions
perfectly. Nothing that I know of has been changed on the computer. I
tried System Restore to go back a few days, but that didn't fix the
problem. It seems to be a Windows issue with the way external
programs are run and the resources av...Chart Errors
I have created a chart using 100% stacked columns. I want my values to show
the % each value contributes to a total. I.E. Overage, Current Collections
and Total Goal. The chart looks great; however, whenever I update my current
collections, the percentage doesn't calculate correctly. The chart seems to
be adding all values together to come up with the percentage need and the
goal doesn't seem to shrink. Any ideas?
Are Overage, Current collections and Total Goal stacked on top of one
another. If so, the % calculated would be based on the total of all three.
"Scacci...Error message #2
We have created a custom attribute and inserted it on the Account Form. This
field is a text box with a 4000 character limit.
We have a specific account that when we add more than +-50 characters and
try to save we receive an error message stating that 'A record with these
values already exists. A duplicate record cannot be created. Select one or
more unique values or try again.'
No sub accounts are associated with this entity and this only occurs with a
Any ideas as to what could be the cause of the problem.