Access Report 'Graphs' - Rendering Issues at time of load

I am running a function/report that completes the following:

1.  Modifies a temp table based on user selection (two variables - Easy)
2.  Modifies the temp table with summary line at end of table (summarizing
table data - Totals for Graphs)
3.  Render a report based on that table
4.  Render 6 graphs to show on the report

All should be good at this point.  Table is modified/updated with correct
detail information and summary line.  Report opens and queries the table
correctly (always). 

Issue:  Each Graph has a select statement based on each requirment (two items
only) and the report runs 95% of the time correctly (correctly meaning all
six graphs rendor).  However, the other 5%, one of the Graphs will NOT render
and reverts back to what ever the data was on the graph at time of
development (which is blank now).

This occurs mostly after i run two or three reports (and then the fourth time
one of the graphs will faulter). But, it happens more often when my users try
and run it.  I believe it is a timing issue based on memory usage but am not
sure.

Does anyone have any knowledge on this type of issue...????? Help!!!

Phx

0
phxpoolplayer
10/10/2007 12:18:56 AM
access.reports 4434 articles. 0 followers. Follow

3 Replies
645 Views

Similar Articles

[PageSpeed] 36

ACG Soft has some report tips on graphs that might fix your issue 

http://www.groupacg.com/

-- 
Duane Hookom
Microsoft Access MVP


"phxpoolplayer" wrote:

> I am running a function/report that completes the following:
> 
> 1.  Modifies a temp table based on user selection (two variables - Easy)
> 2.  Modifies the temp table with summary line at end of table (summarizing
> table data - Totals for Graphs)
> 3.  Render a report based on that table
> 4.  Render 6 graphs to show on the report
> 
> All should be good at this point.  Table is modified/updated with correct
> detail information and summary line.  Report opens and queries the table
> correctly (always). 
> 
> Issue:  Each Graph has a select statement based on each requirment (two items
> only) and the report runs 95% of the time correctly (correctly meaning all
> six graphs rendor).  However, the other 5%, one of the Graphs will NOT render
> and reverts back to what ever the data was on the graph at time of
> development (which is blank now).
> 
> This occurs mostly after i run two or three reports (and then the fourth time
> one of the graphs will faulter). But, it happens more often when my users try
> and run it.  I believe it is a timing issue based on memory usage but am not
> sure.
> 
> Does anyone have any knowledge on this type of issue...????? Help!!!
> 
> Phx
> 
> 
0
Utf
10/10/2007 9:36:01 PM
Duane Hookom wrote:
>ACG Soft has some report tips on graphs that might fix your issue 
>
>http://www.groupacg.com/
>
>> I am running a function/report that completes the following:
>> 
>[quoted text clipped - 22 lines]
>> 
>> Phx
Thanks Duane, unfortunately I do not see a solution to my issue on this site.
My issue is not with printing, it is with rendering (timing of) graphs
utilizing a dataset.  I don't believe an add-in will help this issue.

Thanks for your help.

Phx

-- 
Message posted via http://www.accessmonster.com

0
phxpoolplayer
10/10/2007 10:46:50 PM
Duane,  This worked like a charm.  Thank you so much for solving this
'maddening' issue for me.  

Phx

Duane Hookom wrote:
>I was expecting you to find the free tip/code that resolves some timing 
>issues by requerying the chart object. 
>
>From the ACG Soft site:
>==========================
>Add the following Visual Basic code to the On Print event of the section of 
>the report that contains the Graph object.
>
>    On Error Resume Next
>    Dim objGraph As Object
>    Set objGraph = Me!TheNameOfYourGraph.Object
>    objGraph.Refresh
>    DoEvents
>    Set objGraph = Nothing
>========================== 
>> >ACG Soft has some report tips on graphs that might fix your issue 
>> >
>[quoted text clipped - 12 lines]
>> 
>> Phx

-- 
Message posted via AccessMonster.com
http://www.accessmonster.com/Uwe/Forums.aspx/access-reports/200710/1

0
phxpoolplayer
10/11/2007 4:34:24 PM
Reply:

Similar Artilces:

Business Portal Error-SQL server does not exist or access denied
Hi, We are running business portal 4.0 for one of our customer. It was running correctly, however, they have changed the SQL server port (previously it was set as default 1433). After that the business portal becomes very slow and while creating a new request (purchase requisition) if we open the item pop up; it is showing exception "SQL Server does not exist or access denied...." Can any body tell me how can I provide the new port number to business portal connection to the database. Thanks and Regards, Waliullah, Thanks for using the newsgroups. I have a...

What's happened to the findfirst function in Access 2010?
I have a working Access 2007 Application which is now failing miserably in 2010. It hinges on location the first available working document in a table runing the following VBA code: With Me.Recordset .FindFirst "([fld1] + [fld2]) = 0" If .NoMatch Then .FindLast "([fdl1] + [fld2]) <> 0" Exit Sub End If .... FURTHER PROCESSING ... What must I do to correct this? Go through a record by record search? End With In 2007, this works correctly, stopping at the appropriate record (approc. rec 1385 in the recordset...

open two different Access reports
Hi, I was wondering if i can get some help here. I have two different reports that i want to open when a user clicks a button to view the reports for printing. Is there any way of popping them up at the same time in VBA? Thank you in advance Associates wrote: >Hi, > >I was wondering if i can get some help here. I have two different reports >that i want to open when a user clicks a button to view the reports for >printing. Is there any way of popping them up at the same time in VBA? > >Thank you in advance Yes. Call the DoCmd.OpenReport command twic...

Sort by Credit Card Type on EDC Detail Report
What do I have to do to get my EDC Detail Report to show different credit card types, like Visa, MC or Amex. Now under Tender Type, it just shows Credit card...well...I kinda knew that. How do I fix it? add tender types for each credit card type rather than just "credit card". then z out. all transactions after this change will reflect what you want in the reports. "tl" <tl@discussions.microsoft.com> wrote in message news:A54EEC95-208C-4962-A089-84B22A67632A@microsoft.com... > What do I have to do to get my EDC Detail Report to show different credit >...

Access 2007 and Vista code problem
I am developing a database on a XP SP2 machine. On a form I have created some buttons with event procedures that run 2 queries and open a form. I sent the db to someone running Access 2007 on a Vista machine and nothing happens when she clicks the buttons and there are no messages. I know nothing about Vista so thanks in advance for any help. Tim Might be a reference problem, have them open the open a code window and click tools references. See what says missing and tell them what should be there, Add it and it should work. Duff "Tim Reid" <TimReid@discussions.micr...

Using Access 2003 on client to see Sharepoint 2007
Testing a Sharepoint environment and I can easily manipulate and run the database from Access 2007, but when I try to use Access 2003 it wants me to save the database to a location. The Access 2003 has the compatiblity pack, but it seems to not work when I download it. So the question is using Sharepoint 2007 and posting the Access 2007 format to it, can a user go to the sharepoint site and use a 2003 Access database that has the compatibility pack and open without having to download it? -- Message posted via http://www.accessmonster.com Send check for $500.00 to: David A Jenn...

Input to custom reports
Hello, I'd like to be able to input values to a custom report like the Year. Is there any way to package a custom report and provide input to it? Every year the user has to go into the custom report and change the Year restriction. Alternatively, (this is a payroll report), is there any global variable or some other back door that I can use to get the current year in a custom report? Given the report writer may not be the ticket what would the recommendation be to create custom reports that require input? VB.NET? -- Russ Using VBA you can allow for input in the custom reports. B...

running reports from MS CRM prompt for username and password
Senario: When running a report from Microsoft CRM client it prompts for username and password. When given it's runs the report correct question: if MS CRM 3 is configured correctly is it normal that when trying to generate a report in MS CRM prompt for username and password? No, ideally it should pass the users AD credentials to the reporting IIS server (single sign on). If you were to close the browser and run a different report does it still prompt for credentials? I've noticed this does also depend on the hostname. For instance if the reporting server uses a differe...

VCard issue #2
This is a weird problem, but when I send a vcard to someone, it shows up in my sent items as a vcf file, and has a vcard icon on it, but when the recipient gets the VCard, it shows up as msg file, with an envelope icon as the attachment. When I open it, nothing is there - it's empty. I can't find anything regarding this problem on google or MS's website. Anybody have any ideas? Is it a problem with Outlook? Do I need to do a detect and repair, a reinstallation? Thanks for your help! Does the same happen when you send a message to yourself? Is he/she able to see it w...

question about Time
How to make the time result for example if it�s ( 1:01 ) or higher shows only as ( 1:00 ) and if it�s Lower like ( 0:59 ) or less it will show the same result in this case ( 0:59 ) Any idea & suggestions. Thanks, almufadda@hotmail.com ------------------------------------------------ ~~ Message posted from http://www.ExcelTip.com/ ~~View and post usenet messages directly from http://www.ExcelForum.com/ Using Ron deBruin's google addin and asking for subject round time, I get http://tinyurl.com/wgua -- Don Guillett SalesAid Software donaldb@281.com "saud" <saud.xgc4...

Time Clock Systems
Does anyone have a recommendation for a time clock system that integrates well with GP? On Oct 5, 10:20 am, kcd <k...@discussions.microsoft.com> wrote: > Does anyone have a recommendation for a time clock system that integrates > well with GP? We just implemented Time Matrix by Business Computers (www.business- computers.com) and are very happy with it. We implemented quickly the hardware wasn't propietary or complicated so we were able to source our own stuff. Troy I can speak highly of Unitime's time and attendance system. They are a relatively low cost solution t...

compact database in VBA access 2007
Hello, I have recently upgrade to office 2007 from office 2003. To compact a database from within the database itself, I used the follwing code. Unfortunately it no longer works in access 2007. Is there some similar code that will work? Public Function FncCompactTheCurrentDB() CommandBars("Menu Bar"). _ Controls("Tools"). _ Controls("Database utilities"). _ Controls("Compact and repair database..."). _ accDoDefaultAction End Function Thank You, SL On Thu, 28 Jan 2010 17:34:01 -0800, SL <SL@discussions.microsoft....

Short time vs short date
In my form I have a fldOutOfRoom which the user inputs a short time into the field, i.e, 0900. I have the following code in the open event of another form called frmRNnotes: If DateDiff("h", Forms!frmPtDemographicNew!frmVisitNewEdit.Form!OutOfRoom, Now) >= 1 Then Me.cmdRNnotesEdit.Visible = False This code gives the RN one hour to complete a note and then he/she can no longer edit the note. What I want to know is the Short Time format going to let the cmdRNnotesEdit button be visible everyday within one hour of the of the original time? That is, is the short time just a tim...

Merge code issues with Publisher 2003
It seems whenever the data source is altered, the merge code fields have to be reinserted in the Publisher document. Is this normal? The data source starts in Excel and is then saved as a .txt file to retain number formatting on final merge. ...

Report to show Item Class Distribution Amounts
We would like to create a report, using Crystal Reports, that would show the following: dollar amount break down of the Sales Distribution accounts (COGS and Sales) per item class based on a date range. What is the most accurate way of going about this? We could only think of this method: (in short) sum the Ext Price based on SOP30300.CSLSINDX and SLSINDX and hope it matches the SOP10102 summed distribution amounts. Any advice would be appreciated. Thanks in advance. With the SLSINDX you would use the Extended Price and the CSLSINDX you would use Extended Cost. You would probably ...

LDAP Write access?
My ldap server allows Write access to entries - and a few clients now support this. Any plugins available for Outlook to allow this too? Thanks None that I'm aware of. -- Diane Poremsky [MVP - Outlook] Author, Teach Yourself Outlook 2003 in 24 Hours Need Help with Common Tasks? http://www.outlook-tips.net/beginner/ Outlook 2007: http://www.slipstick.com/outlook/ol2007/ Outlook Tips by email: dailytips-subscribe-request@lists.outlooktips.net Subscribe to Exchange Messaging Outlook newsletter: EMO-NEWSLETTER-SUBSCRIBE-REQUEST@PEACH.EASE.LSOFT.COM Outlook Tips: http://www.outlook...

Some Excel formatting functions taking a long time to work #2
Excel 2000 SP3 When I use some formatting functions for the first time in a session, such as bold, increasing font size etc, it takes up to 30 seconds to work. Meantime Excel is locked up until it completes that formatting call. I suspect faulty DLL? Has anyone experienced this? How to fix (other than a complete re- install) ? Any advice appreciated. Piri On Nov 5, 8:39=A0am, Piri <wiremu.pare...@hotmail.com> wrote: > Excel 2000 SP3 > When I use some formatting functions for the first time in a > session, such as bold, increasing font size etc, it takes =A0up to 30 > secon...

Adding a word to the end of other words at the same time
I was wondering if there was a way to add a word to the end or beginning of multiple other words in Excel. Example; say I have these 3 words.... Alpha Beta Tera Now I want to add LLC to the end of each word but I want to change them all at the same time. Like Alpha LLC Beta LLC Tera LLC Is there a way to do that? Phil Its Excel 2003 try Sub addtexttoend() For Each c In Selection c.Value = c & " xxx" Next End Sub -- Don Guillett SalesAid Software donaldb@281.com "phil" <ptukey@charter.net> wrote in message news:1125340358.873337.4240@g44g2000cwa.googlegroup...

MS Access 2007 code not running
I have created a brand new database in Access 2007 and linked some VB code to run on Form_Load. This code worked perfect with no problems the day I created it. Now today I opened the same form and it is not running the Form_Load code anymore (and yes it is still there, I did not delete it). I got frustrated so I copied and pasted the code to Form_Current and several On_Change events and set breakpoints at the beginning of all the events just to see if it was the Form_Load that was not triggering, but NO events are triggering my VB code. Any ideas? See this page: http://accessjunkie.com/fa...

unable to grant existing user access to TEST company
Set up test company using live company data; ran the script referenced in CustomerSource article ID#871973; can grant and remove user access in all other companies; ran grantsql 9.2; the dexsql log shows the user already has access probably because of using the other company data for the test; I can set up a new user and grant them access, existing users who already have access can view the company...but, I cannot figure out how to grant access to the TEST company to an existing user. The error popup reads "The user could not be added to one or more databases." Dynamics 9.0,...

isinteg reports configuring tstmgr failed : ecBadVersion
we have lost our mail after NAV did it's worst. have performed eseutil /p and /d as suggested elsewhere now get error from isinteg help please Update - have now sorted this thanks ...

Accessing another user's calendar OL2000/OL2003/Ex2000
Here's the situation: Running Exchange2000, v 6.0, sp4. Users are on XP/OL2003 or NT/OL2000. (we're in the process of upgrading all of the workstations to XP.) VIP user is on XP/OL2003. He can access his calendar just fine on his workstation. His secretary and other office admin type people are still on NT/OL2000. They have reviewer or editor rights to his calendar. They try to access his calendar by chosing File/Open/Other User's Folder... and put in his name and calendar. When they do this, the process hangs. In Task Manager, Outlook is "Running." End the Outloo...

Crystal Report Launch 2
(sorry to repost this thread, but this was too old and I got no respones!) Can anyone explain this better? I can't find any documentation about this.........and techknowledge seems to be useless: http://www.greatplains.com/TechKnowledge/techknowledge.asp?print=true&id=28987&code=7842 can anyone show an example? I tried looking at the url of a report (almost a mile long!) and I indeed saw the paramters I put, but when I try to reopen that url in another browser I get this error: Unable to connect: incorrect log on parameters. File 7c433cc1d949d16.rpt. any help would be greatly ...

Speedometer style graph
Anybody know how to make a dial type (speedometer style) graph. Jon Peltier has detailed instructions here: http://peltiertech.com/Excel/Charts/SpeedometerXP.html Just be aware that you're in for a great learning experience! However, if you're not in the mood for a learning experience..... I followed Jon's instructions and created an easily adaptable SpeedOmeter chart that I can make available to you. Is that something you can work with? *********** Regards, Ron XL2002, WinXP "GlenLeedberg@gmail.com" wrote: > Anybody know how to make a dial type (speedometer ...

DLLs being loaded for all applications
I get the following warning at system startup: "Custom dynamic link libraries are being loaded for every application. The system administrator should review the list of libraries to ensure they are related to trusted applications." How do I review the list of libraries and how do I eliminate any that should be removed? ...