Mail Enabled Public Folders #4
We use Public folders for e-mailing our clients (Blood Bank) Exchange 2003
SP1 W2k3 server, Outlook 2003 clients SP2, WinXP SP2. I have a folder for
each blood type and each folder is mail enabled. We have contacts posted in
each folder, there are so many contacts in some of the types that we put them
in Distribution Lists. For each type there is a master DL with other DL's
alphabetically to get around the 100 object max. The problem is I can no
longer send to the master distribution list or any of the sub category DL's.
I can send a message to the public folder and read it...Backup mail server deliver for given mail domain
I have two completely independent exchange servers running in two
physically different locations. In my case I have an MX record that
states #1 should be the primary mail handler for a domain and #2 the
My problem is that some people use #2 as their main server and whenever
they send mail to an address that #2 is the backup for, it doesn't get
sent to the #1 server, but rather delivered locally. Is there a way
that I can configure #2 to first try to deliver the mail to the primary
mail server for that domain?
I hope this is clear.
Exchange will never lookup DNS if mail ...sending and recieving e-mails
How do I determine my incoming e-mail server type, incoming mail server, and
outgoing e-mail server for the e-mail of firstname.lastname@example.org, and if that
e-mail is not compatible then for the e-mail email@example.com? I have gone
to both sites and cannot find this information.
"cam54901" <firstname.lastname@example.org> wrote in message
> How do I determine...Send mail to ISP
Is there away of telling exchange if the user does not
exist internally send mail to isp.
curious as to why the ISP? :)
"Andrew Biggs" <email@example.com> wrote in message
> Is there away of telling exchange if the user does not
> exist internally send mail to isp.
creat a new recipinet policy other than the default one or the one you
created. then in the properties you have to add ur smtp domain address as
advancedautotrends.com then there is an option to uncheck "this exchange is
resposiable for all mail deliv...SMTP not delivering mail after POP3 connector downloads mail
I am stuck. SBS 2003 sp1. The POP3 connector is downloading email from our
ISP accounts. The mail is placed into the '...POP3\Incoming Mail' folder
(verified by turning off SMTP). Once SMTP is turned back on, the mail
doesn't get delivered to the mail boxes...instead it ends up in the
'...POP3\Failed Mail' folder.
(I followed KB: 885685 for troubleshooting and verified that SMTP seems to
be the problem)
Event Viewer gives me these errors:
ID 1060: An SMTP server does not exist locally or is not properly
configured. Ensure that the Simple Mail Transfer Protocol (...sending mail from 2 email addresses
I have successfully got our exchange 2003 system to pull in mail for
Users have email addresses at both domains. Can Outlook2003 be configured
send mail from "EITHER" of the domains or does the Primary address in the
recipient policy always rule.
The primary address rules.
So much so that some people created a 'choosefrom' application for this
Alternatively, you could create a second mailbox for the second domain
and have them use OWA for the second client (which would need ...How do I get my mail from OE6?
I just bought the Microsoft Office 2003 bundle. I want to get my mail from
my Windows 98 computer. It's all backed up and on a CD but I can't seem to
import it to the Outlook 2003.
Can someone send me instructions on how to do this.
Outlook can only import from OE. You must import into OE first.
Consult an OE group or website if you do not know how.
This newsgroup is for support of Outlook 97, 98, 2000, 2002 & 2003 from the
Office family for Intel PCs. For Outlook Express (OE) support try posting in
one of these newsgroups:
microsoft.public.inetexplorer.ie4.outlookexpr...E-mailer for outlook
I need to send 200 E-mails to my customer every 2 monts.
It is frustating doing it with outlook.
Is there a tool that I could use to do itr quickly.
This depends on how you want to setup the messages and what you define as
"frustrating" in Outlook.
Robert Sparnaaij [MVP-Outlook]
Tips of the month:
-What do the Outlook Icons Mean?
-Create an Office 2003 CD slipstreamed with Service Pack 1
"A.B." <firstname.lastname@example.org> wrote in message
>I need to send 200 E-m...Outlook email
I constnatly get four copies of e-mails sent to more than one recipient.
Also, they show up in folders I never wanted them to show up in. What should
If you have anti virus integrated with Outlook, uninstall that AV, reboot,
reinstall AV without the outlook integration
"mswao" <email@example.com> wrote in message
>I constnatly get four copies of e-mails sent to more than one recipient.
> Also, they show up in folders I never wanted them to show up in. What
> ...E-mail Mail Merge
Is there a way to allow all messages to be sent in a e-
mail mail merge without having to select "Allow access to
Outlook..." for every message?
Depends on your version, which you failed to post.
"Joseph S" <firstname.lastname@example.org> wrote in message
> Is there a way to allow all messages to be sent in a e-
> mail mail merge without having to select "Allow access to
> Outlook..." for every message?
...Use Folders for E-mail
I organize my e-mail message into folder by client or topic.
When I look at a message in the "sent items" folder it is shown under
the name of the person to whom I sent it.
However, when I drag that same item into a client or topic folder it
is now shown under my name, apparently since I was the sender.
Is there a way to force the dragged item to keep the same name as it
had in the sent items folder?
All you have to do is switch the view on the client or topic folder to "Sent
To" -- that's the view used in the Sent Items folder by default.
Jocelyn...Not able to send mails using Ms Outlook 2000
Whenever i try to send mails using Ms Outlook 2000 i get
SMTP-MAIL: died on signal 11', Port: 25, Secure(SSL): No,
But i am able to send the same mails with same id
configured with Outlook Express 6 and 5 both
What will be the solutions to this
What you try to do is to export your mailaccount setting
from Outlook exprees into Outook 2000
>Whenever i try to send mails using Ms Outlook 2000 i get
>SMTP-MAIL: died on signal 11', Port: 25, Secure(SSL): No,
>But i a...Why does the text in a text box disappear after a mail merge?
I have an established publisher file that I have mail merged and the text in
most, but not all, of the text boxes have disappeared. Any ideas why?
Could it be behind something? A border perhaps?
Will the text print even tho you can't see it?
MVP Microsoft [Publisher]
"pepperjeanb" <email@example.com> wrote in message
>I have an established publisher file that I have mail merged and the text
> most, but not all, of the text boxes have disappeared. Any ideas ...Can I allow incoming e-mail from some userids from a domain
In the other thread I have going, the messages that are coming in are all
coming from hotmail.com, yahoo.com or email.com. Unfortunately, we do
actually have some people that we deal with on Hospice business (including
board members) who use yahoo or hotmail.
Can I block incoming e-mails from a domain using @yahoo.com but allow
specific addresses to be received? I think this would be a possible help in
stopping these e-mail probes (currently running about 30 in a burst every 4
Not natively, no. You might want to invest in some content filtering
softw...error C1190: managed targeted code requires...
I just switched to vc7 from vc6 and finally got my code to compile in debug
mode but when I tried to compile in release mode I get the following
stdafx.cpp (0) : fatal error C1190: managed targeted code requires '#using
<mscorlib.dll>' and '/clr' option
I tried adding the #include statement to stdafx.cpp but that didn't change
anything (I've taken it back out) and looked over the properties page for
the project and can't find anything that looks like it ought to cause a
managed target. This code is supposed to generate a dll. It has nothing to
do w...when opening a mail merge document.
I have set up a merge document in WORD. I am using excel
as my data info. When I open the document, it opens the
excel spreadsheet way down in row like 10,000. Does
anyone know how I can get it to open in the data on the
For help on Word mail merge using Excel as the data source.
Gord Dibben Excel MVP
On Thu, 19 Aug 2004 11:11:03 -0700, "kks212"
<firstname.lastname@example.org&g...Moving an archived mail into current folder.
I've a lot of archived mails. For some reason, I NEED to move many of those
mails into my current folder (I will move them back into archive after my
work is done). When I do so, will my moved mail be uploaded into my mail
If it is uploaded, I'll get a mail from my admin that my inbox is full (our
limit is 450MB). So, I don't want this to happen. Any workarounds??
Any idea is welcome, as long as my admin doesn't know that I moved the mail
You can open the Archive pst, within Outlook and view mail, no need to move
anything to your inbox...Diagnostic-Code: smtp;551 This is not a relay host
We have migrated and upgraded our exchange server tfrom 2000 to 2003.
Some users have set Outlook forwarding of their emails to external
accounts. However since the upgrade they are receving the following
email from postmaster when an email is forwarded:
Diagnostic-Code: smtp;551 This is not a relay host - mail must be to
or from host domain.
This only occurs on inbound emails from external addresses. Internal
email does get forwarded out.
Any idea why?
email@example.com wrote...Create Activity Mail in Incident from C#
There is a case:
When someone sends e-mail to specific address it is retrieved by our soft,
preprocessed (search for some stuff and other), then it is supposed to be
put in CRM. I know how to create incident (case) but don't know how I'm
supposed to add some activities to it. I have not found any fields
indicating case id. And when I add this activity (I want to create e-mail)
will it be put in history or somewhere else? I would like to put it in some
kind of inbox or something - I'v seen that there is queue object but don't
know if it will be suitable for this t...Publisher e-mail merge fails
I have Publisher 2007 and Outlook 2007. Created an e-mail merge newsletter
with Access and Outlook contacts database. Goes through whole routine to
create merged documents but none get sent. All are valid e-mail addresses. No
explaination why it fails. Merge routine is much faster than the couple times
it actually worked. (what a surprise that was!)
Have searched knowledge base for answers, can't seem to find why this fails.
Do you have a virus scanner installed which integrates itself with Outlook?
Uninstall this integration part of your virus scanner and try again; you'...New mail automatically sets up a reminder
I had to use the inbox repair tool to reapir my
mailbox.pst file because Outlook 2000 said it could not
open it. Ever since doing this all of my new mail have
instant reminders set up for them. They do not appear on
the calendar, but pop up and require me to dismiss, snooze
etc. just like a reminder I would of set up on the
calendar. They are also displayed normally in my inbox.
I can't seem to figure out how to turn this off, and also
how this was turned on!
Any help woud be appreciated
Try starting Outlook once with the /CleanReminders switch. If you need help
using Outloo...did not issue MAIL/EXPN/VRFY/ETRN during connection
I've got an Exch 2003 server that is having issues talking to a
sendmail server (unknown flavor or version). The e-mail admin on the
other side gets this in their log when we try to send:
Jan 8 23:11:47 aurora sendmail: [ID 801593 mail.info]
l0941kVM011617: mercury.probityadvisors.com [220.127.116.11] did not
issue MAIL/EXPN/VRFY/ETRN during connection to MTA-v4
My Exch server isn't having any difficulty sending mail to any other
domains so my first inclination is that there's a problem on the
recipient side, however they are able to send mail into us with out any
problem...e-mailing downloadable template from website
It seems that I can only e-mail when I choose a new template and choose
e-mail from the choices. The program will not let me e-mail anything that I
create if I don't first choose that I will be creating an e-mail file. It
gives me the option under the file menu to e-mail and I follow the same steps
as usual but I never receive the e-mail.
...Looking for the best Credit Card Processor with Ingenico.
I am tired of paying outragous credit card fees. Would like to know if I can
get some recomendations for a competitave rates and support the ingenico as
I use etsms.com. They support the Ingenico I6550 with both pin pad for debit
and digital signature capture as legal signature for credit card sales. Their
credit card processing doesn't require PCCharge or any third party credit
card processing software. Just RMS 2.0 right out of the box. I hope this
helps you in the search for a credit card processor.
> I am tired of paying ...How do I turn on off off requiring SSL for OMA?
I'm running Exchange 2003 SP2 on Windows 2003 SP1. I tried to use the push
to my exchange server and it is giving me error 80070002. I would like to
try using SSL check box but we are too cheap to use a real certificate so I
thought I'd turn off the cert on the serve.
FYI - If I turn on SSL in the WM5 AS 4.1, I get this error 85010001
"Boe" <firstname.lastname@example.org> wrote in message
> I'm running Exchange 2003 SP2 on Windows 2003 SP1. I tried to use the
> push to my e...