changing outlook today view
my Change outlook today view button is no longer
functional after sp3 install. This is true for 4 other
computers in office. Anyone else experience this?
>my Change outlook today view button is no longer
>functional after sp3 install. This is true for 4 other
>computers in office. Anyone else experience this?
>Yes, see my post "Cusatomize Outlook Today". I have
experienced the same problem. I am still waiting on a
response from someone.
"JD" <email@example.com> wrote in message news:<0b4f...want questions
I want some set of questions on Word-2007 to check competency level of the
user. Please help.
Ananta, please refer to my other 2 postings: just check out the WORD part.
If my comments have helped please hit Yes.
"Ananta Gupta" wrote:
> Hello Everyone,
> I want some set of questions on Word-2007 to check competency level of the
> user. Please help.
> Ananta Gupta
> Ananta, please refer to my other 2 postings: just check out the WOR...I want more!
I need to extend a form that aleady has some 100 lines. For instance, one
column has the date, but only until tomorroq. How do I create more lines
based on the same formula?
I usually select the last row in the range and copy it down a few rows.
If you're using xl2003, you may want to look at Data|List.
And if you're using xl2007, this feature has transformed into Tables.
(Data tab on the ribbon|Data tools Group|What if Analysis|Data table)
> I need to extend a form that aleady has some 100 lines. For instance, one
> column has the da...Problems changing x-axis with large data sets
I have relatively large data sets (for example 8 sets of 1500 x/y-values)
that I want to plot in one chart. So far all is fine. But if I want to change
the x-axis scale (to show the curves better, for example from 0-100 to
20-40), everything becomes very slow. Just to mark one curve or try to move
the chart within the sheet can take one minute! If I do the same i Excel
2003, there is no delay or problem. Is there a simple solution, or do I have
to stick with old Excel?
Excel 2007 is a notoriously poor charting performer, particularly if you
customize the scale of an axis. Excel 2007 SP...Changing the order of a chart legend
I have a stacked column chart and would like to reverse the order of the
items in th legend table (my aim is to place the legend on the right hand
side of the chart so that the key lines up along side the appropriate point
in the stack).
...how to change word document to powerpoint with animation
how to change word documentto power point with animation
Well! I can not really see how you would use Publisher.
But you could cut and paste I suppose, but as Word wont have any animation I
guess you will have to do that yourself.
"NyceT" <NyceT@discussions.microsoft.com> wrote in message
> how to change word documentto power point with animation
I am using Vlookup in a number of Cells and reporting #N/A when a match is not found. I would like to use an "if" statement to move to the next level of vlookup. Example
Vlookup A returns a value of ABC in "C3" and an #N/A in "C4" I would like to Set "D3 " and "D4" with a statement like
IF c3=#N/A Vlookup x,y,z else vlookup a,b,c. I can do it with "N/A" however not with "#N/A"
Try something like IF(ISNA(x,y,z), (a,b,c)). You might
have a look at the IS Functions in Help.
>-----Ori...Font style keeps changing when clicking on the Copies per Sheet to
In MS Publisher 2003 my font/color style keeps changing on my business card
layout when I change the option: "Copies per Sheet" tool from "One" to
"Multiple". I also lose the font/color style when I open the business card
file from "My Recent Documents" from the Start Menu in XP Home.
Here I have attached two screenshot pictures that illustrate my problem.
The picture named "Good" indicates that it is in "Multiple: mode and my
colors and font style are perfect. And the picture named "Bad" indicates
that as soon as I cha...I don't want a page of the same label, I want one of each...
I can't find where to tell Pubisher that I want one of each label and not a
page of each label.
I'm using Publisher 2003 (Office 2003)
I see a post that says to enter "<<Next Record>>" but Publisher doesn't see
this as a field, just as text.
This can't be that hard, but I can't figure it out...
Any help would be appreciated.
I see that it prints correctly, but the print preview displayes it wrong....
I think I have it figured out...
"Kelvin" <firstname.lastname@example.org> wrote in message
news:OSpLwThUIHA.5508@TK2MSFTNGP04.phx....how to change list view item's height?
I want to change class CListCtrl 's feature. My requirements include:
1. checkboxs support
2. itme icon support
2. item height can be update.
3. different items has different height
4. the item's subitem can display in more lines
just like this
O subitem1 subitem2 subitem3
Take a look at this one and see if it can at least help you get started.
"tather" <email@example.com> wrote in message
news:1177746886.550952....Text want wrap in text box
I can't get the text to wrap in a text box, word wrap is set to true, I put
some text boxes on a sheet today and the text will not wrap, I did this
yesterday and it worked fine, I can copy the ones from yesterday and paste
them on a new sheet and they work, any ideas? I have rebooted but this did
not help. Using Excel 2000 (9.0.6926 SP3) Thanks Paul B
If you're referring to a Control Toolbat text box make sure that the
MultiLine property is True.
"Paul B" <firstname.lastname@example.org> wrote in message
news:%23ovLUkuLEHA.2456@TK2MSFTNGP12.phx.gbl......Can't change default print resulotion in Publisher 2003
In Publisher 2003, I tried to change the print quality via the "Printer
Properties" dialog box, but that didn't change the print resolution. I
clicked "Advanced Print Settings..." in the print dialog box, but the only
drop-down choice next to "Resolution" is "Default," which doesn't say what
the default is but seems to be set at Super-fine.
How do I cange the print resolution to Normal or Draft?
Don Burgess <DonBurgess@discussions.microsoft.com> was very recently
heard to utter:
> In Publisher 2003, I tried to change...Tip to count and list fonts in Excel sheet
I have a large Excel sheet, with various fonts used, and I want to kno
how many fonts are in the sheet and their name. Anyone can give me a ti
to do this job in a simple way
NetScorpium's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=2520
View this thread: http://www.excelforum.com/showthread.php?threadid=38688
...Outlook 2000 software with huge font size
Running Win98 and Outlook 2000.
When I open outlook, the font on EVERYTHING from within
the program is abnormally large. I did a View dropdown
to "text size" and "medium" is selected.
Anybody know what the fix is for this.
Thank u all :)
Are you using Word as the editor? If yes, then open a new message and check
the zoom settings.
Milly Staples [MVP - Outlook]
Post all replies to the group to keep the discussion intact.
After searching google.groups.com and finding no answer
rossj <email@example.com> asked:
| Running Win9...I want to add a sound event when the cursor bumps left margin
I want to know (via an event sound) that my cursor movement has bumped the
left edge of the spreadsheet. I am entering thousand of rows of data, and it
would help if there was a event sound when I returned the cursor to the left
edge. I have this feature in 123, and find it helpfull.
Put this in the sheet module:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Static ColOld As Integer
If Target.Column = 1 And ColOld > 1 Then Beep
ColOld = Target.Column
mvpearl omitthisword at verizon period net
Since the daylight saving time change. We are having
trouble with users calender appointments being 1 hour off.
We are using Exchange 5.5/Outlook 2000. In Outlook we had
them check the box indicating adjustment for daylight
saving time. After 2 days the time changed back an hour
again. This seems to be only happening with our XP users
only. Any ideas what is causing this.
Thanks in advance.
What patch level is Office XP at?
Milly Staples [MVP - Outlook]
Post all replies to the group to keep the discussion intact. Due to
the (insert latest virus name here) virus, all mail sent to...Want to Add more Sub description Field
How I can add more sub description field like 1,2,3,4,5
You have only limit up to 3 fields in RMS 1,2,3 sub-description also you can
use the extended description and there is main description for the item. so
Altogether you have upto 5 description limit and I think that is enough. Let
me know if this won't fulfill your requirements else use the Item Notes for
Rate if like
"Saleem Suri" wrote:
> How I can add more sub description field like 1,2,3,4,5
> Saleem Suri
...Excel wants to create a page break in every cell!
After saving revisions in an Excel worksheet, I get a popup message that
states "Margins do not fit page size". After clicking "ok" (because this is
my only choice) a page break is automatically created in ever cell. At
times(depending on the sizeof the work sheet) it can be over 100 pages with a
page size 14% or smaller.
Why does this happen, and how can I avoid it?
I saw this suggestion in a different forum.
Try closing excel.
Clean up your windows temp folder
Windows start button|Run
and hit enter
Clean all those files that you ca...Changing data types
I am trying to use ODBC to query an Excel spreadsheet. The ODBC driver
looks at the first 8 rows in each column to determine the datatype. I
have mixed numbers and text, but the driver thinks the column is
numeric. As a result, text entries are not returned.
My solution is to change the format of the cells to Text. This works,
but I have to reenter each numeric value in order for Excel to see
them as Text. Is there a quick shortcut for reentering text in
selected cells? Thank you very much.
Once you have imported the data, check that the format in these cells
is not set to Text...How to do I change text to caps.
I have a column with names in it. The names are in lower case. I wan
to change all letter in the name to capital letters. How can I do thi
without having to type all the names again.
Thank you for your help
Message posted from http://www.ExcelForum.com
Assuming your names are in column A, in column B, use:
You can also capitalize only the first letter of each word by using:
Michael J. Malinsky
"I am a bear of very little brain, and long
words bother me." -- AA Milne, Winnie the Pooh
"EVRPAGING >" ...WANTED
WTB: I BUY SOFTWARE - CHECK AROUND - YOU PROBABLY HAVE SOME OF THE
BELOW TO SELL TO ME.
SEE A LIST OF SOME OF THE SOFTWARE THAT I AM BUYING!
I AM BUYING ALL OF THE BELOW. THE MORE QUANTITY THE BETTER!
I am looking to buy large quantities of Windows 7 Professional Upgrade
Dell DVDs with unactivated COAs included in a SEALED package
I am looking to buy quantities of SYMANTEC NORTON ANTI VIRUS, NORTON
INTERNET SECURITY AND 360 OEM AND RETAIL BOXES
I will buy 2010, 2009, 2008, 2007 and 2006.
If you have good quantities setting around and no longer need send me
detai...Customized Changes to Toolbars
How do you load a customized toolbar? I do know that when you make changes
to a toolbar it saves it as the file excel.xlb, but I don't know how to get
it back into excel. Thanks.
Manual customizations to Toolbars and Menus are saved in a file named *.XLB
XL2000 and 2002 *.xlb file will be in Documents and
Settings\yourname\application data\microsoft\Excel and be Excel9.xlb
Excel 97 in C:\Windows and named username.XLB
Excel 2003 same as 2000 and 2002 and named Excel11.XLB
Perhaps this file is going astray? If on a server, this can happen.
Also if on a serve...Change field type to lookup column
Can you (and if so, how?) change the data type of a populated field to lookup
from a table without losing all the previously input data?
Do not change the field in the table but in your form use a list box.
Build a little - Test a little
> Can you (and if so, how?) change the data type of a populated field to lookup
> from a table without losing all the previously input data?
However, forms are not being used at this time. Data is entered directly on
the form. I do understand that this f...get/change and SY_User Company_Access_REL errors
I am testing a conversion from GP7.5 to GP8.0 and after the installation is
completed and all data is transfered and the nesessary scripts run I am
getting the following errors:
when signing in with regular user:
"A get/change first operation on table 'SY_Users_MSTR'failed accessing SQL
when signing in with the 'sa' account:
"SY_User_company_Access_REL'failed accessing SQL Data"
Any thoughts on what might be causing this?
Are you transfering the data from 7.5 to 8 or have you done a v 8.00
upgrade from GP Utils?
I dont recomm...Requery without visibility change
I have a on Timer event on a form.
Within that logic I am performing a requery function on a number of fields.
When you requery the field goes from visable to not visable back to visable
with the refresh totals.
My problem is I am doing this requery on 26 fields on form. It's ALOT of
blinking. A bit distracting. Is there a way to perform the Requery without
the visibility change. just have it refresh the value.
Much appreciate as always.....
On Fri, 28 May 2010 07:26:02 -0700, stickandrock
Maybe you can wrap y...