My keying is changed ...
When I enter text into Outlook 2000 it shows different results. For
example, if I enter dog it may show ket. Every character is changed.
If I close Outlook and reopen Outlook everything is working fine for a
while then it starts up again. Today, a person who sends me email and
I send email to has the same problem. Did a virus cause this? If so,
how do I get rid of the problem. Also, how did this happen if I have
antivirus protection and a firewall? Thank you for your help.
On 12 Apr 2005 15:57:02 -0700, email@example.com wrote:
>When I enter text into Outlook 2000 i...Auto Filter problem
I am using the auto filter for a particular column to sort out differen
medical programs. When I click the drop down and click a program, i
doesnt show me ALL the lines that say this particular program. Why is
Message posted from http://www.ExcelForum.com
maybe some hidden characters in these lines 8e.g. additional space
"jkb724 >" <<firstname.lastname@example.org> schrieb im
> I am using the auto filter for a particular column to so...how do I format text as strikethrough in Publisher 2003?
I am copying over text from a WordPerfect document into Microsoft Publisher
2003. Text that has been formatted as "Strikethrough" in the WordPerfect
document comes over as plain text with no strikethrough. I have even tried
to just import the document which it looks like it does fairly well at,
except that all text formatted as strikethrough is imported as plain text.
I can possibly believe that Publisher does not have any way to format text
in this way, but I have looked everywhere and cannot figure out how to format
the text in this way. Can anyone help?
You will have to ...How Do I Record Money Transfer Correctly?
I just got Money 2004 and run into a small problem: Money
seems to be able to download transactions from bank
accounts flawlessly, but it does not recognize transfers.
Instead, transfers are recorded as withdraws and deposits,
and show up in the cash flow report as expenses and
incomes. I transferred 5K from a checking account to a
broker account this month. Now it tells me that I spent 5K
and made 5K.
To correct this situation, I tried to change the
transaction type to transfer. But when I changed the
withdrawal transaction to transfer on one account, a new
Word 2003 has a very annoying default. It assumes too much! If I reformat a
few words in a document, it changes the entire document to that formatting.
Grr-rrr-r! I have to constantly press undo to get what I want. I know
there's a feature that's causing this annoyance but I can't find it to turn
it off! Can anyone help, please?
Microsoft Word MVP
"Connie Martin" <ConnieMartin@discussions.microsoft.com> wrote in message
news:CD959D82-F81B-4A9D-993E-73...How do I change the "Project Type" in "law Firm Financial Analys..
he "Lawfirm Financial Analysis Worksheet" currently has only attorney related
"Projects Types," e.g., bankruptcy, forming corporations, amublence chasing.
I'd like to modify the worksheet so it would fit other professions, i.e.,
engineering, consulting, and the like. Are these worksheets, including the
law firm financial analysis worksheet, modifyable?
If you download the worksheet:
you should be able to modify it. Clear the existing project types, and
replace them with the ones you need.
I have a spreadsheet that utilize the stock quote add-in from MSN. On a daily basis I refresh the add-in functions for the Highs, Lows, Last, Volume, etc. On occasion the spreadsheet reverts to manual caculation settings, and I have to press the F9 even after I updated the quotes. I've always preferred the any spreadsheets I open, blank or otherwise, the automatic setting selected for calculations. I consider this an annoyance. Has anyone experienced this glitch? Is there a fix for it?
Excel takes the calculation mode from the first workbook that opens in a
Sub...auto copy self
How do I arrange for Outlook to automatically copy myself
on every new, reply or forward email?
If you mean keep a copy of all sent, see settings under Tools/Options/Email
Options and Advanced Options
"rich" <email@example.com> wrote in message
> How do I arrange for Outlook to automatically copy myself
> on every new, reply or forward email?
...Prevent hyperlink text from printing
I have a hyperlink on the top of each page which jumps back to a slide
towards the beginning of the presentation. The hyperlink looks like this:
<<Return to "Speed" Summary>>
I would like to prevent the hyperlink text from printing when someone prints
If you are using a black and white printer you could choose View - Color and
grayscale, and switch to grayscale. Modify the settings of the textbox with
your hyperlink to not print by selecting the textbox and clicking on the
settings button of the toolbar. Choos...Column reference got changed
Column references in my excel sheets which which usually show as A B C D
....... are now showing 1 2 3 4 5
>Column references in my excel sheets which which usually show as A B C D
>...... are now showing 1 2 3 4 5
Tools | Options, General tab. Untick R1C1 reference style.
Message posted via http://www.officekb.com
Goto <Tools><Options><Settings> and untick <R1C1 reference style>.
"willy" <firstname.lastname@example.org> wrote in message
news:DB0C70...Auto correct or Auto complete
We are all familiar witht he auto correct or auto complete functions found in
MS applications. Of course that means it is available in Access also. My
question is this ... can this function be replicated within the DB, so that
the set of auto correct items are part of the package rather than something
that would have to be set up on each individual desktop system?
It's use, for me, would primarily be within a memo field where medical
abreviations, used as a shortcut, would convert to the true meaning as the
user types them in. Ex: "prn" without quotes would change to. &qu...Auto Scale Chart Macro -- Any improvements please?
This is the best way I've found to correctly scale a chart -- the only way I
found to exclude a chart interpolating with #NA cells was to delete those
cells containing #NA, and run the chart. This takes a long time on my
computer. Wondering if there is a better way. This macro is directly taken
from 2 excel mvps and modified; i believe a mehta and ron bovarty, but could
be wrong. Thanks for taking a look.
Dim ValuesArray(), SeriesValues As Variant
Dim Ctr As Integer, TotCtr As Integer
Applic...Frozen Text Boxes
I accidently dragged a text box from Spreadsheet A to
Spreadsheet B. Now the text box on Spreadsheet B is not
accessible. I cannot click on it, highlight it, or do
anything to get the handles to turn on so I can delete
it. It is just sitting there across 5 rows. I can type
text in the box but that is all.
What did I do and how do I delete it?
Go to the <View> menu and select <Toolbars>. Select the
<Control> toolbar. At the top of the toolbar you will
hopefully have the design icon (Blue set square)
depressed. Click on it to raise it (swi...Text and autonum
Mr problem is basically generating autonumber with combination of text...
For example J0001, J0002
When i open a form on JOB, it will automatically generate an autonumber for
and when i open a form on Loan it will generate autonumber starting with
L0001 and so on....
May I know the way please..
Message posted via http://www.accessmonster.com
Thanks a lot...This is exactly what I want...thanks ya Maurice
>You coul try setting a format on the field in the table like "L000"
>When you enter some data in the table the autonumber will be presented to
I was just curious does anyone know if you can recover an unsaved data, i
made changes to an excel worksheet and I accidently exited out without saving
the changes, can i recover all that data, it took me an hour to do?
If you exited XL normally, you're out of luck.
In article <BC3B2D1C-31C6-479A-A53D-1DF8190F67A2@microsoft.com>,
accidentalprone <email@example.com> wrote:
> Hey all,
> I was just curious does anyone know if you can recover an unsaved data, i
> made changes to an excel worksheet and I accidently exited out...pasting text into a text box
For some reason I am unable to paste text into a chart text box,
(with excel 2007).
Is there a trick to this?
Five minutes with Excel 2007 show that there is no obvious way to paste
copied text into the embedded text box. Aren't you glad you upgraded?
Jon Peltier, Microsoft Excel MVP
Tutorials and Custom Solutions
Peltier Technical Services, Inc. - http://PeltierTech.com
"Gklass" <firstname.lastname@example.org> wrote in message
> For some reason I am unable to paste text into a chart ...OWA auto login
I am trying to use the credentials from the forms authentication login to
automaticaly log in to Outlook Web. I redirect to a URL with this format:
I have seen this example in other posts but this does not work for me. I
still get the Outlook Windows Login prompt.
Perecli Manole wrote:
> I am trying to use the credentials from the forms authentication
> login to automaticaly log in to Outlook Web. I redirect to a URL with
> this format: http://UserName:Password@mailserver/exchange
> I have seen this example in other posts but t...Auto look through subfolders
I can write a macro that will extract data from all excel files in a
What I need to be able to do is write a macro that will automatically
extract data from excel files within folders and sub folders and sub
sub folders etc
For example the data is all held on the following directory:
H:\development forms\2006 cost sheets\
And within that directory by customer - for example Tesco, Boots, Asda
etc. These customers are then subdivided into product ranges - eg
1,2,3,4 etc and some futher subdivided by national or exclusive. All
the excel files are in exactly th...Count number of lines of text in a range/value.
1) Add a form w/ a textbox to your VBA project.
2) Set the textbox's AUTOSIZE property to False.
3) Set the textbox's MULTILINE property to False.
In your code...
4) Call on the Form's SHOW method (modal or modeless is irrelevant).
5) Set the textbox's TEXT property to the (trimmed) value you are
6) Set the textbox's AUTOSIZE property to True.
7) Set the textbox's MULTILINE property to True.
8) Save/get the textbox's LINECOUNT property.
9) Call on the form's HIDE method.
btw, I assume no responsibility for the code. Use it at your own...Turning off formatting when tracking changes
When we are tracking changes, then save the document, and open it later, the
formatting shows up on the right side of the page. When I click on the
Review tab and unclick the arrow beside Formatting under show Mark-up, it
goes away. Then I save, and every time I open it, it's back again. I only
want to track the changes in the document, not the formatting itself, but it
seems as if this is a default and I can NOT get it to go away....I don't want
to accept the changes until appropriate folks have reviewed it, but when I
send them the document, they all complain about t...Any way to get rid of an auto-suggestion in the login dialog box, for Exchange/OL using RPC over HTTP?
A client was using RPC over HTTP to two different Exchange servers (OL
prompting for profile on startup). Both profiles were set up to prompt for
credentials upon connection to Exchange.
There's now only one Outlook profile needed; the other is gone and OL isn't
prompting for the profile selection any longer, which is fine.
However, Outlook is remembering domain1\user and domain2\user in the login
dialog box, and I'd love to be able to get rid of the no-longer-valid
credential dropdown suggestion.
(The computer is not a member of a domain and hence always needs to be
I am trying to create a field in a form that if anything is changed on it, it
will automatically update the date to current date. Is this possible?
>I am trying to create a field in a form that if anything is changed on it, it
>will automatically update the date to current date. Is this possible?
Make sure the last changed date/time field is in the form's
record source table/query. Then use the form's BeforeUpdate
Me.lastchanged = Now
MVP [MS Access]
You can do this in the On Dirty event of the form, which fires as soon as you
m...How to justify text on the left AND right margins of same line?
I'm often doing programmes for concerts: the piece of music should be
justified on the left, the composer on the right. I don't know how to do this
in Word 07. Can anyone help? I'll be grateful for an answer to this!
I assume that you are talking about the title of the piece and the composer.
If that is correct, you should use an left aligned paragraph with right
aligned tab stop at the position where you want the end of the composer's
name to be located. Then you would type the title then press the tab key
and type the name of the composer.
Best to create a ...Macro to turn on "Track Changes" function
I'm trying to create a macro that turns on the "Track Changes" function with
a shortcut key. The problem is that while I'm recording the macro the
traditional way, the recording process stops when the "Track Changes"
function is turned on. Is there a way to overcome this problem or is the
"Track Changes" function not possible to put into a macro, even in Visual
...NDRs, Outlook contacts, GAL changes
We recently allowed a staff member access to update people's email
addresses and display names in our Global Address list on an Exchange
2000 (Windows 2000) server. the GAL has about 20,000 mostly external
address entries. (There are only 30 staff in our organization.)
For display consistency, this staff person has changed many display
names in the GAL to a standardized format, i.e. Lastname Firstname
-Company. Prior to that, it may or may not have displayed the outside
person's organization. Also, some of the listings in the GAL had
people's employee numbers as their alias b...