NT Backup and other backup issues

I'm getting an error when I try to schedule a backup system every day at a  
certain time.  (0x8070005)
I'm using an Admin account.  ???

Is there any software that can backup files without changing them into a  
backup format?
If I have 1000 files in 100 folders I'd like to see 1000 files in 100  
folders in the backup location.
Does any backup software do this?
And it would have to be done incrementally so you're not backing up the  
same thing over and over for nothing.
0
FrankEdwards
4/23/2010 7:48:49 PM
windowsxp.general 3897 articles. 1 followers. Follow

7 Replies
1420 Views

Similar Articles

[PageSpeed] 3


"FrankEdwards" <no@frank.here> wrote in message 
news:op.vbmurnheq6rutr@----------.wp.shawcable.net...
> I'm getting an error when I try to schedule a backup system every day at a 
> certain time.  (0x8070005)
> I'm using an Admin account.  ???
>
> Is there any software that can backup files without changing them into a 
> backup format?
> If I have 1000 files in 100 folders I'd like to see 1000 files in 100 
> folders in the backup location.
> Does any backup software do this?
> And it would have to be done incrementally so you're not backing up the 
> same thing over and over for nothing.

Try robocopy.exe. Works great, does all of the above. 

0
Pegasus
4/23/2010 10:03:44 PM
"FrankEdwards" <no@frank.here> wrote in message
news:op.vbmurnheq6rutr@----------.wp.shawcable.net...

> Is there any software that can backup files without changing them into a
> backup format?
> If I have 1000 files in 100 folders I'd like to see 1000 files in 100
> folders in the backup location.
> Does any backup software do this?

I have used the free app from www.xxcopy.com for 10 years
and still prefer it.   It offers dozens of parameters for detailed
application and its /clone parm works well.

-- 
Don Phillipson
Carlsbad Springs
(Ottawa, Canada)


0
Don
4/23/2010 11:12:45 PM
In news:%23bPNbDz4KHA.620@TK2MSFTNGP02.phx.gbl,
Pegasus [MVP] <news@microsoft.com> typed:
> "FrankEdwards" <no@frank.here> wrote in message
> news:op.vbmurnheq6rutr@----------.wp.shawcable.net...
>> I'm getting an error when I try to schedule a backup
>> system every day at a certain time.  (0x8070005)
>> I'm using an Admin account.  ???
>>
>> Is there any software that can backup files without
>> changing them into a backup format?
>> If I have 1000 files in 100 folders I'd like to see 1000
>> files in 100 folders in the backup location.
>> Does any backup software do this?
>> And it would have to be done incrementally so you're not
>> backing up the same thing over and over for nothing.
>
> Try robocopy.exe. Works great, does all of the above.

Good app; but it won't back up files that are "in use", meaning the 
operating system can't be backed up with it. 


0
Twayne
4/24/2010 4:38:59 PM
In news:eCAk%231z4KHA.3824@TK2MSFTNGP04.phx.gbl,
Don Phillipson <e925@SPAMBLOCK.ncf.ca> typed:
> "FrankEdwards" <no@frank.here> wrote in message
> news:op.vbmurnheq6rutr@----------.wp.shawcable.net...
>
>> Is there any software that can backup files without
>> changing them into a backup format?
>> If I have 1000 files in 100 folders I'd like to see 1000
>> files in 100 folders in the backup location.
>> Does any backup software do this?
>
> I have used the free app from www.xxcopy.com for 10 years
> and still prefer it.   It offers dozens of parameters for
> detailed application and its /clone parm works well.

Great app; but it won't back up files that are "in use", meaning the 
operating system can't be backed up with it.

As long as you aren't trying to back up you operating system, WinZip is an 
excellent program and allows you to create "jobs" for single click backups 
of various types, whatever you prefer.

To do what you want though requires a "copy" function, not backup or 
imaging. Then again, ANY of the backup/imaging programs let you see the 
individual folders and files in Restore mode or even in Backup mode.
   They also provide compaction. You are limiting yourself by insisting on 
being able to see all individual files with Explorer; it's not necessary. 
Xcopy, XXCopy, Norton Ghost, Acronis True Image, WinZip, ntbackup.exe which 
comes with every XP OS are all decent choices for backup or imaging disks.
  With XXCopy (xxcopy.com) you should know a bit about the command prompt 
since it's a command line tool, but once the commands are figured out, they 
can be run from a batch file.  It's also blazingly fast since it doesn't 
have to manipulate the gui much.

HTH,

Twayne`


0
Twayne
4/24/2010 4:47:34 PM

"Twayne" <nobody@spamcop.net> wrote in message 
news:uvvYjy84KHA.4740@TK2MSFTNGP06.phx.gbl...
> In news:%23bPNbDz4KHA.620@TK2MSFTNGP02.phx.gbl,
> Pegasus [MVP] <news@microsoft.com> typed:
>> "FrankEdwards" <no@frank.here> wrote in message
>> news:op.vbmurnheq6rutr@----------.wp.shawcable.net...
>>> I'm getting an error when I try to schedule a backup
>>> system every day at a certain time.  (0x8070005)
>>> I'm using an Admin account.  ???
>>>
>>> Is there any software that can backup files without
>>> changing them into a backup format?
>>> If I have 1000 files in 100 folders I'd like to see 1000
>>> files in 100 folders in the backup location.
>>> Does any backup software do this?
>>> And it would have to be done incrementally so you're not
>>> backing up the same thing over and over for nothing.
>>
>> Try robocopy.exe. Works great, does all of the above.
>
> Good app; but it won't back up files that are "in use", meaning the 
> operating system can't be backed up with it.

It helps mentioning this requirement in the first place. Hobocopy 
(http://sourceforge.net/projects/wangdera/files/HoboCopy/) can back up files 
that are in use. Its syntax is similar to robocopy's although its 
instruction set is not a rich. 

0
Pegasus
4/24/2010 5:35:10 PM
In news:u0bcBS94KHA.1424@TK2MSFTNGP04.phx.gbl,
Pegasus [MVP] <news@microsoft.com> typed:
> "Twayne" <nobody@spamcop.net> wrote in message
> news:uvvYjy84KHA.4740@TK2MSFTNGP06.phx.gbl...
>> In news:%23bPNbDz4KHA.620@TK2MSFTNGP02.phx.gbl,
>> Pegasus [MVP] <news@microsoft.com> typed:
>>> "FrankEdwards" <no@frank.here> wrote in message
>>> news:op.vbmurnheq6rutr@----------.wp.shawcable.net...
>>>> I'm getting an error when I try to schedule a backup
>>>> system every day at a certain time.  (0x8070005)
>>>> I'm using an Admin account.  ???
>>>>
>>>> Is there any software that can backup files without
>>>> changing them into a backup format?
>>>> If I have 1000 files in 100 folders I'd like to see 1000
>>>> files in 100 folders in the backup location.
>>>> Does any backup software do this?
>>>> And it would have to be done incrementally so you're not
>>>> backing up the same thing over and over for nothing.
>>>
>>> Try robocopy.exe. Works great, does all of the above.
>>
>> Good app; but it won't back up files that are "in use",
>> meaning the operating system can't be backed up with it.
>
> It helps mentioning this requirement in the first place.
> Hobocopy
> (http://sourceforge.net/projects/wangdera/files/HoboCopy/)
> can back up files that are in use. Its syntax is similar to
> robocopy's although its instruction set is not a rich.

Hmm, that's a new one to me; I'll have to look that over.

Thanks,

Twayne 


0
Twayne
4/24/2010 11:33:17 PM
>>> Is there any software that can backup files without
>>> changing them into a backup format?
>>> If I have 1000 files in 100 folders I'd like to see 1000
>>> files in 100 folders in the backup location.
>>> Does any backup software do this?
>>
>> I have used the free app from www.xxcopy.com for 10 years
>> and still prefer it.   It offers dozens of parameters for
>> detailed application and its /clone parm works well.
>
> To do what you want though requires a "copy" function, not backup or
> imaging. Then again, ANY of the backup/imaging programs let you see the
> individual folders and files in Restore mode or even in Backup mode.

But it will take a lot of time to restore multi-gig files right?
0
FrankEdwards
4/26/2010 2:01:06 PM
Reply:

Similar Artilces:

DPM 2010 Offsite Backup
Has the ability to create offsite backups for DPM changed in 2010? In 2007, the two options were to tape backup device or to USB (with Firestreamer software). Does DPM 2010 support USB backup natively? Also, is there a whitepaper for upgrading from DPM 2007 to 2010? Thanks, Greg USB support is not changed in DPM 2010 as well, it remains same it was in DPM 2007. Please find upgrade advisor present at: http://blogs.technet.com/b/dpm/archive/2010/02/26/upgrade-advisor-for-dpm-2010-now-available.aspx -- Thanks, Praveen D [MSFT] This posting is provided "AS IS"...

NT 4.0 OS and GP v8.0 Pro
Hello, GP does not support NT4.0 and GPv8.0. I am just wondering if anyone has tried installing GP8.0 on an NT OS? If so, did it work? I have searched and searched but I cannot find any known issues with NT4.0 and GPv8.0. All I know is that GP-MBS doesn't support it. Your feedback is appreciated. Thanks Good question. I read that some SQL Server 2000 functions are not supported on NT 4.0. Perhaps that's the reason. -- Charles Allen, MVP "wisk" wrote: > Hello, > > GP does not support NT4.0 and GPv8.0. I am just wondering if anyone has > tried insta...

An issue regarding the formula
Hi, It's OK to copy the formula from one cell to another one within the same sheet. How about that to copy the formula from one Excel file to another one? It seems only the value of that cell will be copied to that file but not the formula inside it. I even have tried to copy the corr. formula within that again but just the copied formula will not work successfully in there. Thks & Rgds, HuaMin -- HuaMin ------------------------------------------------------------------------ HuaMin's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=29423 View this thr...

Issues launching internet explorer from an application
To all, I can launch Internet explorer with no difficulty, however if I try to invoke Internet Explorer it does not work. If I am in Outlook looking at an e-mail with an attachment that is hyperlinked to the internet and I launch it, nothing ever appears, the IE window starts to open but the address bar remains blank as does the area of the screen thaty normally would show the website information. Please help this problem just appeared a couple of days ago and I can't figuire it out. ...

Can I delete .xlk backups and why are they created?
It seems that Excel is creating .xlk backups of "certain" files. It is only happening in a select few files and directories. Why is it doing this and how can I turn it off? Tools | Options | Save Is this what you're referring to? No, it does the automatic backup regardless of if the AutoRecover settings on that tab. I put all the backups into a different folder to segregate them and saved the workbook (name.xls) again and it saves a file called Backup of name.xlk every single time. "DNA" wrote: > Tools | Options | Save > > Is this what you're...

Exchange 2003 backup fails after running ESEUtil /d on Exchange se
The following message is appearing in DPM after running Eseutil /d on an Exchange 2003 server to free space. My question is how does DPM handle the new priv DB? Does this now need double the free disk space in order to complete the sync job with consistency check? I cannot get the consistency check to complete now. Affected area: First Storage Group Occurred since: 1/18/2010 11:18:28 PM Description: The replica of Storage group First Storage Group on server.mydomain.com is inconsistent with the protected data source. All protection activities for data source will fail until...

Client Performance Issues
In the past week or so my users have been complaining of performance problems with GP. They will get the "Switch To" Error message or "App Not Responding: End Now?" question. If they wait the client gets it self together and runs. The server has no performance issues that I can tell by the counters. I could likely replace my controller for better performance but realistically there does not seem to be any issue that would cause this much grief. Upgraded from 8 to 10 in November 08. Been running great. Mid January is when it started. I have defragged the disks, Adjust...

Backup of Applications[SQL/Exchange] inside the VM
Another related question I had was when reading the DPM tech reports, it was explained that DPM supports two mode of Hyper-V guest backups, 1. Complete VM backup using the VSS Hyper-V Writer in the parent and using IC VSS requestor in the guest, 2. Backup Individual applications[exchange/sql] in side the VM running on VHDs. For the second case does the DPM installs some agent in the guest VM to do this? Or it’s done via VSS Requestor in the IC? Thanks, Vineeth For the second one DPM installs the agent on the VM guest machine. It is treated as an individual machine ...

Compatibility Issue
I had MicroSoft Money 2002 installed on another HD using WindowsXP Home Edition for an OS. It worked splendidly. How, I have changed HD's on the same machine, using the same OS, and I have to go through the Compatibility Wizard to get it to work. Why is that? What can I do to get it to open from the Start menu without having to use the compatibility wizard? Thanks, RLM ...

NT/ Exchange 5.5 - No PST's
Hello all quick question. We have NT servers with Exchange 5.5 running for internal only and are looking at doing away with PST and converting all users over to running off the mail server itself at the same time we are looking at no longer using a tape backup solution but either that of another drive offsite or some type of removeable hot swap typedrive. I was wondering if anyone could point me in the direction of what to backup now that we will no longer be using .pst's and if there is anything special needed for exchange. I have yet to find anything concrete even looking at MS site. ...

Net Display
Hi All, I have set up my POS with 12" rear displays to display HTML files that I have created from powerpoint pps. I have also attached pictures to some, but not all of my items so that they display relevant promotions or upcoming events when scanned at POS. I have set the net display channel option 'Display each item's picture as it is rung up'. I have two issues with this setup. 1) When I scan item, the picture is displayed. However, the item's picture is displayed on net display until I logon to POS for next transaction. (I MUST have option 'forece Logon for eac...

auto accept agent issues
We're running a mixed 5.5/2k3 Exhcange environment. I've run the registration script on the the resource boxes, but when I run the mailboxstatus.vbs, it gives me a status of 2, which indicates that it can not determine the registration status. I have followed the steps in the deployment and admin guide regarding adding the server to the IE trusted list. Any suggestions are welcome. Thank you, Todd ...

backup old emails..
i forgot to mention that i am using outlook xp. manpreet ...

Out of Office issue #2
http://support.microsoft.com/?kbid=248709 I had the out of office problem described in this article and I followed the steps to resolve the issue. Not only did it not work but when I use OWA to turn on my OOO anyone who emails me receives my OOO message plus 5 other blank OOO messages. Can someone pls help? Thanks. ...

Backup File Password???
Trying to restore my backup file results in a password dialog box...none of my passwords are correct...I'm locked out of my backup!!!! Please help. Chuck Did you reinstall the application or move the file to a different machine with a new/different installation of the application? "Chuck Montana" <montanaci@yahoo.com> wrote in message news:1414a01c444af$a3504990$a601280a@phx.gbl... > Trying to restore my backup file results in a password > dialog box...none of my passwords are correct...I'm > locked out of my backup!!!! Please help. > Chuck Yes I did....

Cell Format Issue
My excel worksheet is Formatted to 'General', but when I try to type in a number, it automatically moves the decimal 2 places (e.g. I type "34" and excel reads "0.34" or I type "156" and excel read "1.56") The problem still occurs when I format the cells to "Number - 0 Decimal" or "Number 2 Decimal." If I type "36.0" then excel does read 36.0, which thus far is my only way around this, but that is a lot of extra numbers to type when doing large spreadsheets. I hope this is an easy fix that I am somehow looking over, ...

Restoring a Backup
We need to restore fixed asset data from our year end backup, but don't want to restore any of the other modules. Is this possible? We've been told we have to restore everything if we restore anything at all, but that doesn't seem like a very worthwhile backup then to me if you can't do a selective restore. Any ideas? Thanks. Hi Create a another great plains test company within Dyn Utilis, once completed, restore the live backup data to the new test company (presuming you are running GP on SQL). You should be able to view the FA data, and DTS the FA data to the...

Publisher font issue
I have an issue with Publisher 2000 and the calendar font size. The defaulted font size is 18. In each calendar date box, when I enter information is a smaller font (8 font), and save; close the program and then reopen; the 8 font text defaults to 18 font. I need the smaller font for information that needs to go into the calendar. I have tried a few tings through the help feature but nothing I do seems to work. Can someone help me with this or tell me how to fix this problem? Thanks Try this, put the calendar on the background (master page) Ctrl + m , use text boxes for your i...

Restoring backup/corrupt
I have Money 2004 on my home computer and also one at work.When I update my checkbook I then make a backup onto 3 floppy disk and restore it to the other computer so they both always have the same info.Since I upgraded to Money 2004 I can't restore my work.I am getting a corrupt message when I get to the third disk.I beleive it says file not there or corrupt. It is impossible to get phone help.Can someone help?You can email me directly. Thanks,Jamie In microsoft.public.money, Jamie Sacco wrote: >I have Money 2004 on my home computer and also one at >work.When I update my ch...

Automated Backup to Remote Server
Hi all ~ I've been able to use the command line listed below to automate a backup. One snag - I'm trying to backup to an alternate server. In my case, my servers are grab-02 (database node) and grab-01 (location of desired backup). I do have shared folders for both folders. How can I use this command to backup from grab-02 to grab-01 using the following command? What would be the fully quanlified path for the shared docs folder on grab-01? C:\Documents and Settings\GB>osql -U sa -P password -S grab-02 -Q "BACKUP DATABASE gb_production TO DISK = 'c:\database_backup&#...

Money 2007 sync issue
I remember see other complaints about this but do not remember seeing a solution. I am running Money 2007 on XP Home Media edition. Both are at the latest SP level. All of my downloads are direct (I do not have MSN password on the system). When I perform an update I notice the following behavior. 1) After the updating now spinning icon stops (and today it stopped and I waited 15 minutes); the first account that I attempt to accept a transaction I am notified that I can not at the present time. All I need to do is back arrow to the original page and come back into the account at try a...

Money 2005 Backup Options
Does anyone know if Money 2005 Standard allows for backup to CD as a selection option? Someone knows. Given how many people ask about this, it seems highly probable they'd be bragging about it if they did add a CD burning engine to Money. They haven't anywhere I've read. CDs aren't general purpose writable file systems and there is a lot of reasonably specialized software required to make them so. Some of this software has the added problem of dealing with the many slightly different optical drives out there. Unless Money05 takes that on itself, it will continue the p...

Restoring backup from different Passport
While my old computer was dying, I backed up the old Money file (2004) to CD. I got a new computer, downloaded, and was charged for, 2006 Standard. I was able to restore the backup, but I keep getting the opening message that I have the Web Trial version, which will expire in 90 days. I've worked with Support document KB889930, and nothing's worked short of removing and reinstalling the program. I'd like to avoid doing that on my own (KB895866); it involves going into Windows Registry, which I hear shouldn't be done without good knowledge. I think the problem is tha...

Replication Issue for Public Folders
Hello I am trying to replicate public folders from one exchange 2003 server to another we are trying to decommission some hardware , we have a single forest , single domain , one exchange 2003 organisation Actually the setup for exchange is (setup by previous engineer) Existing 4 node cluster ( OLD IBM hardware ) with the Public Folder store located on one virtual server PIMPROD which translates to a physical machine WNPIMP02 New 4 node cluster ( HP Hardware ) with the Public Folder store on one virtual server PIMPROD10 which translates to a physical machine EVS03 We...

Exchange backup #2
I'm a rookie to Exchange admin so please excuse the question if it seems ridiculous... I'm not confident in my tape backup and even less confident that my existing Exchange server will continue running past tomorrow (new server coming!). I want to perform an additional "backup" of my Exchange data to a second server. I do this by manually stoping the Exchange services and copying the DSAData, MDBData (which contains priv.edb and pub.edb) and the MTAData directories to the second server, then restart the services. If my Exchange server dies and my tape fails can I ...