ehrecvr.exe error message after installing SP3

Hi,

I own a Freecom Hybrid DVB-T USB Stick which used to work fine (Was
able to see TV), unfortunately since I installed SP3 for Windows XP I
always get following annoying message on startup when plugging in the
DVB-T USB Stick:

An unhandled win32 exception occured in ehrecvr.exe 

The message keeps popping up every 5 seconds, until I disconnect the
USB Stick.

When I check the event viewer following error message is generated by
the Media Center Receiver service:

TV Tuner Malfunction. (0x80040265) TridVid Tv Tuner

I found comments of people who experienced the same problem, but
nowhere a decent solution... apperently one or more KB's is causing
problems:

http://freakokalam.blogspot.com/2007/02/media-center-crashes-ehrecvrexe.html

It seems that some fixes which were part of "Update Rollup 2 for
Windows XP Media Center Edition 2005 RU2" are reverted when you install
service pack 3:

http://forum.team-mediaportal.com/general-support-51/patch-tuner-issue-channel-scan-crash-windows-xp-6344/

I tried all different kind of things, but nothing seems to work. :(

Maybe you guys can give me a hand.

Thanks in advance!


0
Freakyyy
8/13/2010 5:29:14 PM
windowsxp.general 3897 articles. 1 followers. Follow

4 Replies
707 Views

Similar Articles

[PageSpeed] 8

On Fri, 13 Aug 2010 12:29:14 -0500, Freakyyy
<Freakyyy.4fnxkj@no.email.invalid> wrote:

>
>Hi,
>
>I own a Freecom Hybrid DVB-T USB Stick which used to work fine (Was
>able to see TV), unfortunately since I installed SP3 for Windows XP I
>always get following annoying message on startup when plugging in the
>DVB-T USB Stick:
>
>An unhandled win32 exception occured in ehrecvr.exe 
>
>The message keeps popping up every 5 seconds, until I disconnect the
>USB Stick.
>
>When I check the event viewer following error message is generated by
>the Media Center Receiver service:
>
>TV Tuner Malfunction. (0x80040265) TridVid Tv Tuner
>
>I found comments of people who experienced the same problem, but
>nowhere a decent solution... apperently one or more KB's is causing
>problems:
>
>http://freakokalam.blogspot.com/2007/02/media-center-crashes-ehrecvrexe.html
>
>It seems that some fixes which were part of "Update Rollup 2 for
>Windows XP Media Center Edition 2005 RU2" are reverted when you install
>service pack 3:
>
>http://forum.team-mediaportal.com/general-support-51/patch-tuner-issue-channel-scan-crash-windows-xp-6344/
>
>I tried all different kind of things, but nothing seems to work. :(
>
>Maybe you guys can give me a hand.
>
>Thanks in advance!
>

Have you tried uninstalling / reinstalling the tv stick ?
0
Jim
8/14/2010 1:08:36 PM
Is the device supported in SP3?

Was the device connected to the computer when you installed SP3 *and  then 
all of the August 2010 updates*?

Why did you wait until WinXP SP2 was no longer supported before you 
installed SP3?

What anti-virus application or security suite is installed and is your 
subscription current?  What anti-spyware applications (other than Defender)? 
What third-party firewall (if any)?  Were any of these applications running 
in the background when you installed SP3?

Has a(nother) Norton or McAfee application ever been installed on the 
computer?

Did a Norton or McAfee free-trial come preinstalled on the computer when you 
bought it? (Doesn't matter if you never used or Activated it.)


Freakyyy wrote:
> Hi,
>
> I own a Freecom Hybrid DVB-T USB Stick which used to work fine (Was
> able to see TV), unfortunately since I installed SP3 for Windows XP I
> always get following annoying message on startup when plugging in the
> DVB-T USB Stick:
>
> An unhandled win32 exception occured in ehrecvr.exe
>
> The message keeps popping up every 5 seconds, until I disconnect the
> USB Stick.
>
> When I check the event viewer following error message is generated by
> the Media Center Receiver service:
>
> TV Tuner Malfunction. (0x80040265) TridVid Tv Tuner
>
> I found comments of people who experienced the same problem, but
> nowhere a decent solution... apperently one or more KB's is causing
> problems:
>
> http://freakokalam.blogspot.com/2007/02/media-center-crashes-ehrecvrexe.html
>
> It seems that some fixes which were part of "Update Rollup 2 for
> Windows XP Media Center Edition 2005 RU2" are reverted when you install
> service pack 3:
>
> http://forum.team-mediaportal.com/general-support-51/patch-tuner-issue-channel-scan-crash-windows-xp-6344/
>
> I tried all different kind of things, but nothing seems to work. :(
>
> Maybe you guys can give me a hand.
>
> Thanks in advance! 

0
PA
8/14/2010 6:50:36 PM
I already reinstalled the playback software several times without any
success.

I got bored one day and thought by myself 'hey, let's install that
great sp3 finally' but I wish I never had.

I think the USB-device was indeed connected when I installed sp3, can
this have caused the problem?

Norton has been installed in the past, but removed it longtime ago
using the Norton Removal Tool.

I'm not the only one who can't watch TV any longer after installing
sp3, but there's no decent solution for this problem.


0
Freakyyy
8/15/2010 4:04:44 PM
We have no idea WTF you're talking about or to whom you're replying.

To keep track of things, it helps immensely if you quote all of the previous 
message(s) in your replies to the newsgroup.  Thank you.

Freakyyy wrote:
> I already reinstalled the playback software several times without any
> success.
>
> I got bored one day and thought by myself 'hey, let's install that
> great sp3 finally' but I wish I never had.
>
> I think the USB-device was indeed connected when I installed sp3, can
> this have caused the problem?
>
> Norton has been installed in the past, but removed it longtime ago
> using the Norton Removal Tool.
>
> I'm not the only one who can't watch TV any longer after installing
> sp3, but there's no decent solution for this problem. 

0
PA
8/16/2010 2:37:09 PM
Reply:

Similar Artilces:

IV_Reconcile Error
Hi, I have a problem in GP 10 SP4 and SQL2005. During the inventory reconcile getting error message box : FB : Couldn't close table What could be the wrong? Tks Saf Hi Saf, Is this occuring to all workstations with GP10 SP4? Additional troubleshooting steps are running Checklinks on Inventory Series and executing grant.sql for the company database. Let us know how you go! Cheers, Dennis Araullo, MACS Microsoft Certified Technology Specialist GP,CRM,AX MCITP Installation and Configuration AX 2009 MCITP Database Administrator SQL 2008 Citrix Certified Ent...

Multiple Sent Messages
I have Outlook Express installed at home on a Windows XP Home Edition PC. I received and e-mail with attachements. When I tried to just 'Reply', it generated 28 sent e-mails. Since that time, when I send an e-mail with attachments (a .jpg or .xls for instance) it will generate a varying number of 'Sent' messages and change the format of the attachment. I sent a spreadsheet to my office as a test and the e-mail subject was 'Test' and the spreadsheet was named 'Stan.xls'. It generated 5 e-mails. 4 were picked up by a spam filter and the one tha...

How do I re-install the Contacts file?
Due to a corrupt Windows file I had to re-install Windows. Unfortunately this means that the new Outlook Contacts files, and files I had set up in "My Shortcuts", do not show up in Outlook. are emptyHow can I move files from the original Outlook (specifically the information in "Contacts" and files I had set up in "My Shortcuts"? files from the old Outlook into the current Outlook? Thanks, Sorry--I accidentally hit the POST button while editing this mesage. Disregard this message, and see "Moving files after re-installing Windows WP Pro". ...

Hq sync errors WS101
I installed a new hq installation on the first store and it synced fine, but when I sync the second store I get a error on processing the Work sheet 101: <<CstateMachine::ExecuteState>> Error -2147024770:Automation error The Specified module could not be found (unhandled error, State = 9 They are running Nitrosell and New West Tech Mobile Suite add-ins which could be causing the sync errors. Any Ideas? Thanks Dave ...

how can I look into store.exe
I have an email sobig that i cant even download it on my outlook express 6.0.... The adviced for is to locate it on the Queues in Outbound or inbound messages on IMC, but if it is not in there the message may be stuck up in Store. How can I locate it and delete the massega in store.exe they say I can use the MFCmapi but i'm a newbie how can do this. Do I have to download the MFCMapi? what is it? thanks ...

Cant delete messages on server
I was running Outlook 2000 OK. I upgraded to Outlook 2002 that came with pocket PC. Now I cant get my emails messages to delete off the ISP server. On advanced tabs of options the box for LEave a copy of messages on server is unchecked. Could you turn on diagnostic logging (see http://support.microsoft.com/default.aspx?scid=kb;en-us;Q300479) and post the OPMLog.log file (preferably as an attachment) after you've downloaded some mail that wasn't deleted from the server? -- Jeff Stephenson Outlook Development This posting is provided "AS IS" with no warranties, and co...

Error bars not displaying
Microsoft Excel 2002 SP3. I have data that looks like this: Median Min Max Na 0.032617 0.000106 0.387142 Cl 0.0265 0.000017 0.282087 Ca 0.000524 0.0000047 0.0059883 K 0.005523 0.000007 0.038365 Mg 0.0000823 0.0000001 0.0018515 PO4 0.00031 0.00002 0.00105 HCO3 0.001655 0.000262 0.003048 I'm doing a line plot with the first column as the categorical x axis, and the second column, median, on the y-axis, which is logarithmic. I then set up error bars using the values in the min and max column (columns 3 and 4 above) as custom values in the "error amount" part of the format data ser...

outlook.exe faulting module outllib.dll
Hi all! My one user having problems with Outlook 2003. User complains it moslty craches when he working with Calendar. Event viewer states: Faulting application outlook.exe, version 11.0.8118.0, stamp 456628bf, faulting module outllib.dll, version 11.0.8118.0, stamp 4566283d, debug? 0, fault address 0x0000355f. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. both WindowsXP PRo and Office 2003 upto date. How to solve this problem, regards, toxikas Is there any way to report these issues to M$ so we can get a proper update that will n...

error in report only when run as a subreport
I have two reports that are identical except for the underlying query. the reports show mvoement information but each report shows a different direction. I put each of these directional reports in a third report to display the directions side by side. When run individually the directional reports execute fine. When run as subreports I get divide by zero errors in a section footer of the subreports. The error does not occur when run as a stand-alone report. Any help would be appreciated. Thank you in advance for any help. -- Message posted via http://www.accessmonster.com ...

Error linking to my ATL dll
I'm using VS2005, building a WM5 application. The dll is a ATL com dll providing network services to my app. I've tested the dll with a simple dialog app, but now I try to link it to my application I get .... io 8\VC\ce\atlmfc\include\atliface.h(591) : error C2143: syntax error : missing ',' before '.' which points to virtual HRESULT STDMETHODCALLTYPE ShowUI( /* [in] */ DWORD dwID, /* [in] */ IUnknown *pActiveObject, /* [in] */ IUnknown *pCommandTarget, /...

Public Folders Error Message
In Public Folders getting an error message with some (not all) contacts and calendar items when you try to open them even with admin right or ownership right. The message says "Can't open this item" unkown error. Any thoughts "=?Utf-8?B?TWhlcm5hbmRleg==?=" <Mhernandez@discussions.microsoft.com> wrote in news:165B0C43-FC8B-4EDB-938F-7CE0B97F7FC8 @microsoft.com: > In Public Folders getting an error message with some (not all) > contacts and calendar items when you try to open them even with admin > right or ownership right. The message says "...

New install, exchange 2003 or 2007?
Our school district currently uses Novell products in our server closet including Groupwise with about 550 mailboxes. We have made the decision to jump to Microsoft products including Exchange. We will be installing Exchange this winter on brand new hardware and start to migrate users early summer. We will also be installing Office 2007 (including Outlook 2007) on all machines before migrating users from Groupwise to Exchange. Which version of Exchange should we install, 2003 or 2007? I know there are advantages and disadvantages both ways. 2003 - more mature with several service packs and s...

"This operation cannot be performed." error
Hi, I noticed recently that I got a "This operation cannot be performed." error whenever I started Money. The error details told me to run the Money file Repair tool to fix the problem. I did a level 2 repair and the report produced said "No broken records in the original file.". I still got errors when I closed and further tried to reopen the file. I then went into 'Bills' and started to delete a bill, then close/reopen Money to see the effect. It came down to a single bill. I duplicated this bill and deleted the original, now Money is working ok and not re...

Distmon error
I am having the same prob that everyone else is describing, however have looked on the Microsoft support forum. I did a search and did no find the 2 Adobe files anywhere on my computer. I also disabled the NAV plugin...... I am still haveing the sam prob. Is there any OTHER way to fix this without reformatting!!?? Thanks in advance -- Message posted from http://www.ExcelForum.com I think I'd shell to DOS and run an old DOS command: dir c:\pdfmak*.xla /s Or make sure you're looking through hidden folders and for hidden files, too (windows explorer setting). "spcinf <...

ehrecvr.exe error message after installing SP3
Hi, I own a Freecom Hybrid DVB-T USB Stick which used to work fine (Was able to see TV), unfortunately since I installed SP3 for Windows XP I always get following annoying message on startup when plugging in the DVB-T USB Stick: An unhandled win32 exception occured in ehrecvr.exe The message keeps popping up every 5 seconds, until I disconnect the USB Stick. When I check the event viewer following error message is generated by the Media Center Receiver service: TV Tuner Malfunction. (0x80040265) TridVid Tv Tuner I found comments of people who experienced the same prob...

exe to c++
anybody knows how make this, i need visualice how an exe file application open an encrypted file (what is more easy ? open the encrypted file or decompile exe application to c++ source >) Open the encrypted file. -- Jonathan Wood SoftCircuits Programming http://www.softcircuits.com "Javier Gonzalez" <JavierGonzalez@discussions.microsoft.com> wrote in message news:9D08F549-529A-424B-9A0E-40E582323F67@microsoft.com... > anybody knows how make this, i need visualice how an exe file application > open an encrypted file (what is more easy ? open the encrypted file or...

Error/Information message on shutdown
Keep getting the following message in a Microsoft Visual Basic window on Outlook 2002 shutdown: "The macros in this project are disabled. Please refer to the online help or documentation of the host application to determine how to enable macros. OK HELP" I've looked at macros under tools menu and have the low setting checked. I have not introduced macros to outlook that I'm aware of. I've checked help and the online knowledge database but can't seem to find the solution to this problem - any help would be greatly appreciated - Thanks. ...

Why doesnt my programe recieve messages
I cant recieve messages on my computor altho I can send them Do you get any errors? What t ype of mail account? What version of Outlook? What version of Windows? -- Patricia DiGiacomo Outlook MVP Author - Special Edition Using Microsoft Office Outlook 2003 Lead Author - Access 2003 VBA Programmer's Reference Author - Absolute Beginner's Guide to Microsoft OneNote 2003 http://blogs.officezealot.com/cardoza http://www.cardozasolutions.com "djohnson100@hotmail.co.uk" <djohnson100hotmailcouk@discussions.microsoft.com> wrote in message news:B3BA79A2-5014-49C4-B0A5-4...

Error message 35100 doesn't exist
Hi there, We have just upgraded our GP 8 sp5 installation to GP 9. When we open GP Utilities to start the DB upgrade, we get an error message which says: "Error message 35100 doesn't exist" and then another message which says: "Error upgrading table: DB Upgrade". Any ideas? We have tried removing packages from the DynUtils file. Thanks! ...

Outlook 2003 SP2 in cached mode. opening a shared calendar.Error to open calendar
Hi, I have Outlook 2003 SP2 and Exchange 2003 EE SP2 on Windows 2003 SP1.all with the latest security updates from beginning of may 2007 ( actually for Outlook 2003 it didn't matter I have also some with no security updates with teh sameproblem Problem: User A is working in outlook in cached mode. User B decides to share his calendar to User A User A tries to open the shared calendar of User B and gets an error :unable to display the folder .you do not have sufficient permissions ... User A tries again 10 minutes later , one hour later -> same problem User A logs off and on -> same...

Message Store Folders Deleted
Working with Windows Live Mail, I foolishly changed the directory for it's message store to the location where my Vista Windows Mail is kept. Although WLM said the folder wasn't empty and refused to proceed, I find that most of the folders got deleted. I have remaining only: Local Folders edb.chk edbres00001.jrs edbres00002.jrs WindowsMail.MSMessageStore If I create a new message store location and use Windows Mail to import, I get only empty Local Folders. Any ideas on recovery other than the long shot of some kind of undelete program? My most recent backup ...

attached images in Outlook messages not wanted
Hi All I have aproblem with Outlook 2003. Two images keep appearing as attachements in emails that get replied to my emails. I have checked the signatures, deleted them but still it occurs. One image is a jpg and the other an png. The strange part about it is that both belong to a training manual that I was writing some months ago. How do I stop these images from attaching (as the email sent from me does not show) as they are annoying my recipients and me when they come back attached? TIA cds ...

can you tell me what an error 920 is?
I'm trying to save a visio file out as a jpeg, or gif, or png. I keep getting the error with no explanation of what the error means - any help is appreciated You can go to the following link and it explains the issue you are having and how to fix it: http://support.microsoft.com/default.aspx?kbid=295691 "Julie" wrote: > I'm trying to save a visio file out as a jpeg, or gif, or png. I keep > getting the error with no explanation of what the error means - any help is > appreciated > > > ...

Classes generated by XSD.exe #2
I have a schema that I've used to generate a class structure vis the xsd.exe utility. I'm having to manually validate the resultant XML since the resultant document is not necessarily compliant with the structure defined by the original XSD. Here's what I'm wondering, though..... I have a server process that is going to have to process these documents rather quickly. At the end of the document, there are going to be attached files (base64encoded). During this processing, there isn't any sense in loading up the entire XML statement into a DOM document because I only...

Macro
Hi All, I currently have a huge macro that I use to import .asc files into excel for validation, and other things. This macro separates project accounts from non project accounts and performs a series of tasks on the project accounts. The project accounts can be differentiated from non project accounts because they all have an "X" in them... So, in my code, I first have to import the delimited data, set up column breaks, and then sort by my account column to get all of the account data at the bottom of the wkst...(code is already written for this, and I have been working o...