Automatic Updates 09-12-10

I have a Dell Inspiron e1505 with Windows XP Home Edition - SP3.  Overall 
workinig pretty good.  I have Automatic Updates turned on and for some reason 
it keeps wanting to "Installing Microsoft .NET Framework 1.1 Service Pack 1 
(update 1 of 1)... ", however just as it's starting a window entitled 
"SL18.tmp" pops up and says "SL18.tmp has encountered a problem and needs to 
close.  We are sorry for the inconvenience." My only option at this point is 
to Close the window and then the Automatic Update stops, but then after a 
while it tries again with the same result.  Any ideas?
0
Utf
9/12/2010 3:30:06 AM
windowsxp.general 3897 articles. 1 followers. Follow

4 Replies
1694 Views

Similar Articles

[PageSpeed] 21

KB number of update is...?


mbennett wrote:
> I have a Dell Inspiron e1505 with Windows XP Home Edition - SP3.  Overall
> workinig pretty good.  I have Automatic Updates turned on and for some
> reason it keeps wanting to "Installing Microsoft .NET Framework 1.1 
> Service
> Pack 1 (update 1 of 1)... ", however just as it's starting a window 
> entitled
> "SL18.tmp" pops up and says "SL18.tmp has encountered a problem and needs 
> to
> close.  We are sorry for the inconvenience." My only option at this point 
> is
> to Close the window and then the Automatic Update stops, but then after a
> while it tries again with the same result.  Any ideas? 

0
PA
9/12/2010 5:31:42 AM
On Sat, 11 Sep 2010 20:30:06 -0700, mbennett
<mbennett@discussions.microsoft.com> wrote:

>I have a Dell Inspiron e1505 with Windows XP Home Edition - SP3.  Overall 
>workinig pretty good.  I have Automatic Updates turned on and for some reason 
>it keeps wanting to "Installing Microsoft .NET Framework 1.1 Service Pack 1 
>(update 1 of 1)... ", however just as it's starting a window entitled 
>"SL18.tmp" pops up and says "SL18.tmp has encountered a problem and needs to 
>close.  We are sorry for the inconvenience." My only option at this point is 
>to Close the window and then the Automatic Update stops, but then after a 
>while it tries again with the same result.  Any ideas?

Going by Google , you might have a bug .
0
Jim
9/12/2010 10:26:47 AM
I did find this KB article: http://support.microsoft.com/kb/923100


Good luck
-=-

"mbennett" wrote:

> I have a Dell Inspiron e1505 with Windows XP Home Edition - SP3.  Overall 
> workinig pretty good.  I have Automatic Updates turned on and for some reason 
> it keeps wanting to "Installing Microsoft .NET Framework 1.1 Service Pack 1 
> (update 1 of 1)... ", however just as it's starting a window entitled 
> "SL18.tmp" pops up and says "SL18.tmp has encountered a problem and needs to 
> close.  We are sorry for the inconvenience." My only option at this point is 
> to Close the window and then the Automatic Update stops, but then after a 
> while it tries again with the same result.  Any ideas?
0
Utf
9/12/2010 12:53:03 PM
I am not familiar with the .NET Framework.  I looked at the KB Article and it 
seemed simple enough to uninstall and reinstall the different versions, but 
my question is, is there a list of version I should have for Windows XP Home 
SP3?  I currently have six versions (1.1, 2.0 for SP2, 3.0 for SP2, 3.5 for 
SP1, 4 Client Profile, and 4 Extended).  I don't know how I got these or 
whether they are the right ones, or the only ones I should have.  Can you 
provide any insight, or point me to where I might learn a bit more.  I would 
rather not be loading unneccesary versions on my computer, but I want to make 
sure I have all I need.  Thanks.

"Ǝиçεl" wrote:

> I did find this KB article: http://support.microsoft.com/kb/923100
> 
> 
> Good luck
> -=-
> 
> "mbennett" wrote:
> 
> > I have a Dell Inspiron e1505 with Windows XP Home Edition - SP3.  Overall 
> > workinig pretty good.  I have Automatic Updates turned on and for some reason 
> > it keeps wanting to "Installing Microsoft .NET Framework 1.1 Service Pack 1 
> > (update 1 of 1)... ", however just as it's starting a window entitled 
> > "SL18.tmp" pops up and says "SL18.tmp has encountered a problem and needs to 
> > close.  We are sorry for the inconvenience." My only option at this point is 
> > to Close the window and then the Automatic Update stops, but then after a 
> > while it tries again with the same result.  Any ideas?
0
Utf
9/13/2010 2:12:07 AM
Reply:

Similar Artilces:

A program is trying to automatically send e-mail on your behalf.
I tried posting this in microsoft.public.outlook.general, but no nibbles. ------------------------------------------------------------------------------------------------------ Does anybody know how to turn the "A program is trying to automatically send e-mail on your behalf." prompte off? It pops when one of my MS Access apps is emailing one of it's reports to somebody. It happens on the Citrix server that one of my MS Apps is running on, but it does not happen when the app is running on my own PC. Consequently I'm hoping for some user-configurable setting that controls...

Latest xp update causing Money to crash????
Ever since I installed the latest XP updates, Money 2005 keeps crashing on me. Anyone else experiencing this problem???? No issue here. Have you tried to restore to a point previous to the update? "JRB" <JRB@discussions.microsoft.com> wrote in message news:219988AA-0980-4055-A772-835E45B9DB3F@microsoft.com... > Ever since I installed the latest XP updates, Money 2005 keeps crashing on > me. Anyone else experiencing this problem???? XP: eXtra Pain arthur == On Wed, 22 Mar 2006 09:40:27 -0800, JRB <JRB@discussions.microsoft.com> wrote: >Ev...

Exchange 2000 SP3 updates ans security patches
I have Exchange 2000 Version 6.0 (Build 6249.4: Service Pack 3) running on Windows 2000 Server SP4. What is the best way of checking for missing security patches and updates? Would it be enough if I run MBSA 2.0 and rely on it only? MBSA is not showing any patches/updates missing however the above build number seems to me a lillte old comparing to those I saw when researching the web about Exchange 2000. Does the updates not change the build number? Thank you. "mtler" <mtler@discussions.microsoft.com> wrote: >I have Exchange 2000 Version 6.0 (Build 6249.4: Service Pa...

Leopard 10.5.2 combo updater released!
This might help with a lot of the problems Office 2008 users are experiencing. Get this combo updater rather than using Software Updater to download. A combo updater will go back and rewrite files that could be corrupted. Software Updates are incremental updates. Mac OS X 10.5.2 Combo Update: 343 MB <http://www.apple.com/support/downloads/macosx1052comboupdate.html> More on types of update file: <http://www.entourage.mvps.org/troubleshoot/combo.html> -- Diane, Microsoft Mac MVP (MVPs are not Microsoft Employees) Entourage Help Page <http://www.entourage.mvps.org/> Ent...

Automatic CC
Hello, Is there any way to create a template where a contact is automatically CC in the email. So I dont forget to cc them every time I send an email. Thanks ...

Money 2006 constantly faults with automatic updates
Whenever I use the Internet automatic updates, money faults out and wants to send a report to Microsoft. Also my account list shows most accounts with a status of 'Update In Progress' I've done a complete reinstall after removing it and power cycling my machine. I thought it may have been something with removing 2004 and installing 2006, but got same problem Has anyone else been having this problem? I really just want to go back to Money 2004. What's the error message? -- Glyn Simpson, Microsoft MVP - Money http://money.mvps.org Check http://money.mvps.org/faq f...

Instances doesn't get updated when the master stencil changes
Hi, I am trying to create a stencil master shape in such way that when I change the master, all instances also get updated according to the new master shape. At this point I have a master shape in a stencil and I have hundreds of instances in different visio drawing based on the very same stencil. When I change the master shape, I have to change all instances (several hundreds) and this is such a pain. How can I solve this problem? Any help would be appreciated, Max On Tue, 17 Oct 2006 09:29:15 -0400, "Maxwell2006" <alanalan@newsgroup.nospam> wrote: >Hi, > &...

64 bit language pack and 64 bit cumulative update of december 2009
I want Project Server 2007 64 bits language pack. but i cant find this . In net there is language pack of project server 2007. but there is no define 64 bits. I need 64 bit language pack for 64 bits project server 2007 . and also I need cumulative update (december 2009) of 64 bit project server 2007 and windows sharepoint services 3.0 (64 bit) kindly tell me the correct link from where i will download. ...

Automatic axis format
Hi, I'm need to make a automatic axis format within excel. The number of rows is depending of a imported file. No problem to get the max. number of rows. But to put this number into the chart ( category axis) is more problematic. I try VB but my knowledge is at dummy level ! Waiting for your reply............. Hi, Have a look at Jon's examples of dynamic charts. http://peltiertech.com/Excel/Charts/Dynamics.html Cheers Andy jos wrote: > Hi, > I'm need to make a automatic axis format within excel. > The number of rows is depending of a imported file. > No problem to g...

Update global address book not working!
Hello, I've noticed that users I've setup over the last two days aren't appearing in the global address book in people's outlook but you can see them in the All Users Address book. Can someone inform me how to update this so the user is visable in the global address book. Thanks If you're running Outlook 2003 cached mode you're working off the offline address book, so start looking there. -- Ed Crowley MVP - Exchange "Protecting the world from PSTs and brick backups!" "John D" <anonymous@discussions.microsoft.com> wrote in message new...

Windows update problem. Clueless
Here is my windowsupdate.log for today, I cannot connect to windowsupdate website period. Not sure what is going on. Can someone help me decode this nonsense? 2010-05-25 17:20:51:671 1484 b98 AU ############# 2010-05-25 17:20:51:671 1484 b98 AU ## START ## AU: Search for updates 2010-05-25 17:20:51:671 1484 678 DnldMgr *********** DnldMgr: Regulation Refresh [Svc: {9482F4B4-E343-43B6-B170-9A65BC822C77}] *********** 2010-05-25 17:20:51:671 1484 678 DnldMgr Contacting regulation server for 20 updates. 2010-05-25 17:20:51:671 1484 b98 AU ######### 2010-05-25 17:20:51:687 1484 ...

How do I get an automatic equal sign to begin the formula bar?
How do I get an automatic equal sign to appear in the formula bar in Excel for Microsoft 2003? This happened for me in the 2000 version and I could just click on it with my mouse pointer, but now all that appears is the function sign with no equal sign after it. It makes my job a lot more time consuming to have to type in the equal sign while building formulas. Please help, anybody? The = icon disappeared in newer versions of excel (xl2002???). You can add an = icon Tools|customize|commands tab|Insert category (Scroll down the list until you find the = icon) And drag it to your fav...

My worksheet automatically adds a fill color when I enter text.
When I type text in a blank cell, the cell automatically is highlightes with the bright yellow fill. There is no conditional formatting on this workbook. Check your VBA editor. You might have an Event Macro which does what, usually, a CF does. Try to Increase the Macro Security to its maximum level in order to eliminate the Event Macro from running... You may, also consider to "rem" all the Macro commands by adding a Preceding apostrophe to each command. Micky > When I type text in a blank cell, the cell automatically is highlightes with > the bright yello...

I open the MDB, the form runs automatically
Simple question I have an MDB file with 20 files and 7 forms in it. When I open it up, the form runs immediately an access goes into some sort of protected mode. I can't view the tables, queries etc. I can see the code by pressing Alt F11 but not the data. I created a blank db and imported the mdb so I could see the tables. But how do I open the original without it running the code? When I look at the code. I don't see anything that sets properties or invokes the code automatically. There are no macros in this, just the forms and associated code with them. Any ideas Thanks Colm ...

Automatic updates, automatically disabling itself
Automatic updates, automatically disabling itself. 2nd day now onecare popped up to tell me the updates turned themselves = off. I'm thinking what malware would want to turn the updates off ? Any idea what's going on here ? Did I AUTOMATICALLY install an update = that caused this ? <keepout@yahoo.com.invalid> wrote in message news:8l7mi5tkgp1gd15fkef71ll5mrui9ukmht@4ax.com... > Automatic updates, automatically disabling itself. > > 2nd day now onecare popped up to tell me the updates turned themselves > off. Drop OneCare and install Microsoft Sec...

Re: 06-10-10
"oomine.noriko" <oomine.noriko@sepia.plala.or.jp> wrote in message news:... > ...

Having numbers automatically appear bold
Hi all, Had such great advise last time, thought I'd try again. I have a large range of cells where I will be inputing sales figures i the form of currency revenue. The range is about G-I and 1-400. Th sales data will be a comparisson of YTD 2001 - 2004 revenue results. What I hope to do is have any figure that is above $30,000 appea automatically in bold so as to stand out as a good client. I gues there is something in the IF function to do this but I'm stumped. Any ideas? Thanks again in advance. Saxte -- Message posted from http://www.ExcelForum.com select the range you wa...

tighter exchange integration??? 12-10-03
Has anyone thought of trying to build a bit tighter exchange integration? Like when a task is created in CRM having it go to exchange too? Etc? ...

Is it possible to automatically move data entered in columns into rows?
Is it possible to automatically move data entered in columns into rows? It seems like a simple thing to do but I can't find a function anywhere. Cheers, Richard Thorneycroft Husky Products If you enter something in ONE cell it is automatically in a row and a column. So, perhaps a bit more explanation is in order. -- Don Guillett SalesAid Software donaldb@281.com "Richard Thorneycroft" <dancecommander81@hotmail.com> wrote in message news:9e2f3f75.0411160750.7003c6ab@posting.google.com... > Is it possible to automatically move data entered in columns into rows? >...

Local Software Update service for Office 2004?
Is it possible to run a local software update server for Microsoft Office on my LAN? With my Xserves, I am using Software Update Service for Apple updates, but can't figure out if there is a way to run a local software update service without using my Internet connection. I can get it from the central servers fine, but was wondering if I could run a local server to manage the Office Updates and monitor the update levels per station. Phillip Remaker wrote: > Is it possible to run a local software update server for Microsoft > Office on my LAN? > > With my Xserves, I am using...

Notefix Utility 07-07-10
I have the Notefix utility from 9.0 and need it again while adding a new test company in GP 10.00.1400. Has the Notefix utility been changed/updated since then? yes because there's a notefix for 10. "DavidM" wrote: > I have the Notefix utility from 9.0 and need it again while adding a new test > company in GP 10.00.1400. > > Has the Notefix utility been changed/updated since then? ...

I cant get any updates to install.
Everything is on that is to be on. Any light would be great, thanks. -- Skip Rock Maybe you have them all? "Skip" <Skip@discussions.microsoft.com> wrote in message news:4CCB3033-4CD5-4197-A8A9-C4778A6636DA@microsoft.com... > Everything is on that is to be on. > Any light would be great, thanks. > -- > Skip Rock Skip wrote: > Everything is on that is to be on. > Any light would be great, thanks. Speaking of light... Start button --> RUN (no "RUN"? Press the "Windows Key" + R on your keyboard) --> type...

FW: Try corrective update
--lkdjfwcphrqtozfp Content-Type: multipart/related; boundary="ygblvpmg"; type="multipart/alternative" --ygblvpmg Content-Type: multipart/alternative; boundary="lcxxrzqr" --lcxxrzqr Content-Type: text/plain Content-Transfer-Encoding: quoted-printable MS Consumer this is the latest version of security update, the "November 2003, Cumulative Patch" update which resolves all known security vulnerabilities affecting MS Internet Explorer, MS Outlook and MS Outlook Express as well as three new vulnerabilities. Install now to help maintain the security of yo...

Automatic Forward
How can I automatically forward messages received from a specific sender to another's e-mail person? Thanks, ...

CE6: How to Disable SIP popup automatically
Hi, I know SIP popup can be disabled by the following registry setting in CE5: [HKEY_CURRENT_USER\ControlPanel\Sip] "TurnOffAutoDeploy"=dword:1 But It doesn't work in CE6. How to disable SIP auto-Popup in CE6? Thanks. Eric The SIP Auto Deploy in CE is due to Windows Controls invoke SHSipPreference (exported by AYGSHELL.DLL). So the easiest way is to avoid including AGYSHELL (SYSGEN_AYGSHELL) But if excluding AYGSHELL is not an option, you may need to modify the SHSipPreference (PRIVATE\SHELL\SHELLPSL\HAVEAYGSHELL\shellpsl.cpp) to supress SIP s...