Unable to install updates for .NET Framework

Tried to  do updates for .Net Framework and the following 2 would not 
install:  "Microsoft .NET Framework 3.5SP1 and .NET Framework 2.0 PS2 
Security Update for Windows 2000, Windows Server 2003, and Windows XP. . " 
and "Microsoft .NET Framework 1.1 SP1 Security Update for Windows 2000 and 
Windows XP (KB979906)".  I have uninstalled all .Net (1.1, 2.0 SP2, 3.0 SP2 & 
3.5 SP2) and rebooted.  I then ran Microsoft Update to see if it showed and 
updates available and there was one for .NET Framwork 2.0, so I knew the 
un-install failed.  I then ran Aaron Stebners clean up tool which stated it 
had cleaned up successful.  I then downloaded the .NET 1.1 and installed, 
installed .NET 1.1SP1 and ran Microsoft Update and the update failed again.  
I am at a loss of what to do now.  I have not tried to re-install any other 
versions of .NET which I need as well.  Any help would be appreciated!!!
0
Utf
6/30/2010 7:20:40 PM
windowsupdate 1336 articles. 0 followers. Follow

1 Replies
1946 Views

Similar Articles

[PageSpeed] 4


"Sharie" <Sharie@discussions.microsoft.com> wrote in message 
news:6ABE0C7D-8843-4E9C-B3B1-A775A886F34E@microsoft.com...
> Tried to  do updates for .Net Framework and the following 2 would not
> install:  "Microsoft .NET Framework 3.5SP1 and .NET Framework 2.0 PS2
> Security Update for Windows 2000, Windows Server 2003, and Windows XP. . "
> and "Microsoft .NET Framework 1.1 SP1 Security Update for Windows 2000 and
> Windows XP (KB979906)".  I have uninstalled all .Net (1.1, 2.0 SP2, 3.0 
> SP2 &
> 3.5 SP2) and rebooted.  I then ran Microsoft Update to see if it showed 
> and
> updates available and there was one for .NET Framwork 2.0, so I knew the
> un-install failed.  I then ran Aaron Stebners clean up tool which stated 
> it
> had cleaned up successful.  I then downloaded the .NET 1.1 and installed,
> installed .NET 1.1SP1

> and ran Microsoft Update and the update failed again.

> I am at a loss of what to do now.


Find out why?

BTW if an update really is "successfully installed" and there is not 
something undoing that I would just mark the update to be hidden. 
Eventually it might not be offered incorrectly any more.


> I have not tried to re-install any other versions of .NET which I need as 
> well.


Supposedly those would be independent of  .NET 1.1


> Any help would be appreciated!!!


HTH

Robert Aldwinckle
---  

0
Robert
7/1/2010 2:14:29 PM
Reply:

Similar Artilces:

MSDN Installation 1.2: Javascript Errors
I have installed a CRM Server and separate CRM client (along with the supplied example database). Access through IE6 works fine. Within Sales for outlook, I have 2 issues; 1> It takes 1.5 minutes to start up Outlook (it's only a 1Ghz machine, but CPU usage appears as 1-2% while it is loading). 2> I get various script errors when clicking on the CRM Shortcuts; Errors include messages such as... 'http//crmsvr/sfa/home_comps.aspx - object does not support this property or method' IE script error 'Could not complete the operation due to error 80020101' For testing, ...

Bill Calendar does not update properly
Hi, I had to open a backup of my file and successfully updated with my bank JP Morgan Chase Bank (Texas)(direct ofx connection). After the update bills that were scheduled to be paid automatically are still showing in the calendar but they are appearing many months in the future. Is there a way to get them to show correctly in the calendar as I have confirmed with the bank that they are scheduled correctly. Thank You, Greg ...

Windows update just does not find any patches for windows
I run windows update but no patches ever show up for windows. Belarc advisor and It.shavlik both say that I am missing critical and regular patches. Any thoughts would be appreciated. Always state your full Windows version (e.g., WinXP SP3; WinXP 64-bit SP2; Vista SP1; Vista 64-bit SP2; Win7; Win7 64-bit) when posting in a forum or newsgroup. Please do so in your next reply. RonRPh wrote: > I run windows update but no patches ever show up for windows. Belarc > advisor > and It.shavlik both say that I am missing critical and regular patches. > Any > thoughts ...

VB.NET Web Programmer in New York $40/hr
VB.NET Web Programmer in New York $40/hr We are looking for someone to work as a VB.NET Web Developer. In this role, you will design and develop application software for a successful global corporation. You will also support and install software applications. Additional duties are to participate in the testing process and utilize formal development methodologies. A bachelor's degree is required and a BSCS is preferred. Candidates must have skills in: Microsoft .NET (ASP.NET, VB.NET) and Microsoft SQL Server 7.0/2000. 2-4 years of experience in applications programming for a major corpora...

Outlook 2002 SP2 automatic update of server rules
Laides and Gentlemen, after installing outlook 2002 on the computer I have the problem that the generated rules are automatically updated if the rule wizard is closed. Due to the big amount of rules I am using it is not possible to activate all rules on the server. With the previous version of outlook it was possible to select between automatic or manual update of the server. In the actual one this is not possilbe within the rule wizard. Is there a way to keep oll rules on the client and prevent this update of the server? Due to the fact that the client is up and running 24h / 7 da...

Unable to open Outlook2003. Error: MAPI unable loading msncon.dll
I am trying to set up Outlook 2003 on home computer but keep getting the following message when trying to open application. MAPI was unable to load the information service msncon.dll. Since I am not open to open, I cannot get to the help feature. Please advise Have you downloaded the latest MSN Connector from their site? Or, if not using it, have you uninstalled it? Try opening Outlook in Safe mode (start->run->outlook.exe /safe) and go into the Advanced options and uncheck it from add-in manager or COM add-ins. --� Milly Staples [MVP - Outlook] Post all replies to the group to ...

Install 2005 without converting my quicken file
I want to run both quicken and money on the same computer. How do I install Money 2005 without converting my Quicken file. I want to start Money from "Scratch." In microsoft.public.money, Paul wrote: >I want to run both quicken and money on the same computer. How do I install >Money 2005 without converting my Quicken file. Even if you "convert" your Quicken file, you could still run both. I believe that Money only reads your .qdf and does not change it. > >I want to start Money from "Scratch." Tell Money you do not want to convert. It will a...

Outlook crashing with v3c installed
Hi All Outlook is crashing as mentioned in article KB931270 except with outlook 2007. The supposed fix is part of KB925874 however I am not in one of the affected time zones and the fix is quite intensive meaning updates to Windows, Exchange, CRM Server and Client machines. Can anyone suggest whether I should install the patches in this situation? Ian ------=_NextPart_0001_7CA384A5 Content-Type: text/plain Content-Transfer-Encoding: 7bit Hi Ian, You can still get the hotfix separately. Normally a support incident is free if it is for a hotfix. So, you could open a support incide...

home-cinema-installers.co.uk home cinema installation
if you need a superb 'home cinema installation' (http://www.home-cinema-installers.co.uk) then we give you a outstanding finnish. Thank You -- Addessapelamb ...

font installation data
How can I find out which application (not which user) installed a given font on my PC? I do NOT want to know if the font is not an original Windows font at all, I want to know why and when it was installed. On 24/12/2009 11:19, Horst Heinrich Dittgens wrote: > How can I find out which application (not which user) installed a given > font on my PC? > > I do NOT want to know if the font is not an original Windows font at > all, I want to know why and when it was installed. There is no standard way of recording this data. You may be able to get the date from th...

Case Modified Date/Time update on changes
Having the ModifiedOn date and time update on changes to related notes, activities or even just the OnSave event would be much more useful when reporting on neglected cases. ---------------- This post is a suggestion for Microsoft, and Microsoft responds to the suggestions with the most votes. To vote for this suggestion, click the "I Agree" button in the message pane. If you do not see the button, follow this link to open the suggestion in the Microsoft Web-based Newsreader and then click "I Agree" in the message pane. http://www.microsoft.com/Businesssolutions/Com...

Project Server 2007 Task Update Status
Does anyone know of a way for me to setup a view that will enable my resource managers to view the status of task updates that have been submitted to the PM? We require PM approval of task updates before timesheets can be submitted, and I would like the resource managers to see whether thier folks have submitted updates (imported from thier timesheets) to the PM and whether those update requests are pending, approved or rejected. I can find any fields availabe in the resource assignments view that show (change requested, submission status, etc.) for tasks, nor do I see anything that I ca...

Unable to Edit/Add records on Form in a New ADP
I just started playing around with rebuilding a MDB file as an ADP. I built a form and subform from scratch, but I'm unable to edit or add records. SELECT Id, LoadDate, TrailerDOTNumber, SealNumber, SealDate, SealId, LoadLocation, LoadStatus, DispatchStatus, DispatchLocationId, DispatchUserId FROM TrailerActivityHeaders ORDER BY LoadDate Recordset Type: Updatable Snapshot I'm getting the 'This recordset is not updatable' Ideas? Never mind... (Does anyone have a spare bandage btw? I cut my head banging it on the wall due to my stupidity...) "D...

Auto Except install
I want to install this, but will I be prompted to reboot the server? Do I need to do this off hours? thanks Hi Installing the Auto Accept Agent does not require a server reboot. -- Mark Fugatt Microsoft Limited This posting is provided "AS IS" with no warranties, and confers no rights. "spepi" <spepi@discussions.microsoft.com> wrote in message news:F3E74ABD-4701-492C-8DA4-BDCDF18511A4@microsoft.com... >I want to install this, but will I be prompted to reboot the server? > > Do I need to do this off hours? > > thanks > Thanks Mark. Now t...

Unable to open calendar
Folks, i cannot open or view my calendar. When I start Oultook a Pop Up appears saying "Could not read the Calendar" On clicking Ok, the pop up vanishes and nothing happens. If i then go over to my calendar, it says "Cannot display the folder" I have run Oultook Diagnostics and nothing shows up as irregular. I ran the repair function (off my setuo CD) and nothing happened. I also re-installed Outlook and rebooted my comp and nada. When staring in safe mode i also get he same errors. I am using Off 2007, Win 7 TIA, P "phamiltonsmith" <...

Updates won't install
These 3 updates have been installed repetedly and each time it shows they have been installedhowever, the updates ready to install icon keeps showing back up saying these updates are ready to install AGAIN! And I have tried turning off spyware and anivirus to install and have restarted several times. Microsoft .NET Framework 3.5 SP1 and .NET Framework 2.0 SP2 Update for Windows Server 2003 and Windows XP x86 (KB982524) Download size: 0 KB , 0 minutes (Downloaded; ready to install) This update addresses a set of known issues of the Microsoft .NET Framework 3.5 Service Pack 1. ...

unable to download emails and unable to stop synchronization
I am going to try one more time to get this fixed. My Outlook 2003 has been unable to download emails. While it is trying, a small box in the tray section shows up and it states that it is trying to synchronize folders. After a time out time Outlook gives me errors. This is the error message. It has these numbers 0X800CCC15 , or 0X8004210A, or 0X8004210B, which these error messages state that either I did not have enough timeout or look and see if server name is wrong. All of you have given me these suggestions. no joy. Thank you very much however. I went ahead and finally found a sect...

vb.net 2008 working with other Microsoft tools
I am planning to generate 8 to 15 reports in sql server report server 2008. I want to create the 8 to 15 separate sql server reports and tie them together with a table of contents in a visual basic.net 2008. I then want to export these reports into an electronic format to email to users. Can you give me suggestions on how to accomplish this task? Have a look at crystal reports that comes with visual studio, you can export as pdf, excel (but becareful there i found formatting was poor but maybe i did something wrong!) and csv "Wendy Elizabeth" <WendyElizabeth@di...

unable to scroll the page
on microsoft office frontpage 2003 - when i up loaded my web pages to my web site www.millertimeauction.com , there is no sroll bar for up & down of page - any help what browser? it scrolls for me in IE8 scroll bar will only appear if it needs to -- ~~~~~~~~~~~~~~~~~~ Rob Giordano Microsoft MVP Expression Web "FrontPage Error" <FrontPageError@discussions.microsoft.com> wrote in message news:EC19C7CE-1C5A-4872-A47B-2C04BD7E96A7@microsoft.com... > on microsoft office frontpage 2003 - when i up loaded my web pages to my > web > s...

ms crm startup sap document via .Net Connector
Has anyone used the SAP .Net Connector to show account details based on the sap customer id ? Any example or info is more than welcome ...

How install addt'l payroll users license
I have just purchased a license for 101-250 employees in payroll and am having trouble figuring out how to install the license key. Can anyone help me with this? Tools - Setup - System - Registration Keys You might need your system password to be able to access the Reg keys. Have all users exit out before changing the keys. Kevin "Melanie Wagner" wrote: > I have just purchased a license for 101-250 employees in payroll and am > having trouble figuring out how to install the license key. Can anyone help > me with this? ...

Unable to start POP3, NNTP, IMAP4...
Dear all, I'm evaluating to install Exchange 2003. After the installation I find the said protocol haven't been started. I tried to start them in "Servers --> Server Name --> Protocols" but no help. Please comment.... Thanks!! Background: Windows 2003, Exchange 2003, Active Directory DC with all roles of FSMO as it's the first DC in the forest. Thank you very much!! -- Are you boring? Let's come to talk together... ^^ news://news.hk4u.com/hk4u.2hit6 Those services are disabled by default in Exchange 2003. Go to Administrative Tools, Services and enable...

RMS Installation
We recently acquired a new client (single location outdoor mercandizer) with an existing RMS installation. One of our first tasks was to install a new workstation and add RMS. Upon installation on the desktop, I can connect to the SQL database on the "server" with Store Operations Administrator, but NOTHING happens with Store Operations Manager except a dialogue box stating it can't hit the database. How do I point SOM to the database???? Thanks in advance for the help!!! Symmessooner in SO Administrator - File/Configuration Make sure you log into Windows as an admi...

Running Total in report using net of two columns in third column
I have a client time/fees database of over 22k records. I have a report which provided a summary of all time booke and all fees charges to that client. What I require is two additional columns the first which provides a running total of time bookings and the second which provides a running total of the net of the time booked field less the fees charged field, i.e. the net of time bookings which have not been invoiced. I can do this in excel but in access I appear to be getting data from other clients which should not be included in the report. What type of field are you usin...

Unable to conect
Hi, I have set up my email account to work with aol using the guidlines for outlook 2002 but it is still unable to connect. Any suggestions? Thanks. John <John@discussions.microsoft.com> wrote: > I have set up my email account to work with aol using the guidlines > for outlook 2002 but it is still unable to connect. Any suggestions? Since you pay AOL for their service, my suggestion is to ask AOL. -- Brian Tillman ...