KB979909 and KB979906 Updates Fail

Hi,

I have tried many times since 6/11 to install the subject updates with no 
success, with the yellow shield reappearing again and again. I keep getting 
the following 'Automatic Updates' message:

Some updates could not be installed:
Microsoft .NET Framework 3.5 SP1 and .NET Framework 2.0 SP2 Security Update 
for Windows 2000, Windows Server 2003, and Windows XP x86 (KB979909)
Microsoft .NET Framework 1.1 SP1 Security Update for Windows 2000 and 
Windows XP (KB979906)

(I also found an 'Error Code' 0x643 listed in the 'Installation Failure' 
detail screen.)

I have seen various recent messages in this discussion group with the same 
or part of the same issues, but listed suggestions (e.g. editing the 
registry, finding, uninstalling and reinstalling previous updates, etc.) are 
much too technical for someone like myself with limited troubleshooting 
ability.

Is there an easy fix?

I am running Windows XP with service pack 3. I have had this computer (Dell 
Dimension 8400) for 5 years, have always installed the updates as soon as the 
yellow shield appears, and have never had a problem until now. If I cannot 
get the updates to install successfully, is there any way to block these 
particular updates from causing the yellow shield to appear? 

Any help would be greatly appreciated! Thanks!

-Dana D


-1
Utf
6/28/2010 12:35:57 AM
windowsupdate 1336 articles. 0 followers. Follow

5 Replies
2669 Views

Similar Articles

[PageSpeed] 56

I am having the same exact problem, on Compaq machine. Any help would be greatly appreciated here too. 
-1
Gale
6/28/2010 2:01:38 PM
Hi, I am having the same error. Does anyone know a fix.
Neil.
0
Neil
6/28/2010 8:58:11 PM
I am having the same problem with KB979909.  Trid several times to install.



"Dana D" wrote:

> Hi,
> 
> I have tried many times since 6/11 to install the subject updates with no 
> success, with the yellow shield reappearing again and again. I keep getting 
> the following 'Automatic Updates' message:
> 
> Some updates could not be installed:
> Microsoft .NET Framework 3.5 SP1 and .NET Framework 2.0 SP2 Security Update 
> for Windows 2000, Windows Server 2003, and Windows XP x86 (KB979909)
> Microsoft .NET Framework 1.1 SP1 Security Update for Windows 2000 and 
> Windows XP (KB979906)
> 
> (I also found an 'Error Code' 0x643 listed in the 'Installation Failure' 
> detail screen.)
> 
> I have seen various recent messages in this discussion group with the same 
> or part of the same issues, but listed suggestions (e.g. editing the 
> registry, finding, uninstalling and reinstalling previous updates, etc.) are 
> much too technical for someone like myself with limited troubleshooting 
> ability.
> 
> Is there an easy fix?
> 
> I am running Windows XP with service pack 3. I have had this computer (Dell 
> Dimension 8400) for 5 years, have always installed the updates as soon as the 
> yellow shield appears, and have never had a problem until now. If I cannot 
> get the updates to install successfully, is there any way to block these 
> particular updates from causing the yellow shield to appear? 
> 
> Any help would be greatly appreciated! Thanks!
> 
> -Dana D
> 
> 
1
Utf
6/29/2010 5:43:37 PM
I am still having this problem. At this point, I'd just like to permanently 
cancel/block out the attempted 2 updates. Is there a way to do this?

Thank you!

"Bob H" wrote:

> I am having the same problem with KB979909.  Trid several times to install.
> 
> 
> 
> "Dana D" wrote:
> 
> > Hi,
> > 
> > I have tried many times since 6/11 to install the subject updates with no 
> > success, with the yellow shield reappearing again and again. I keep getting 
> > the following 'Automatic Updates' message:
> > 
> > Some updates could not be installed:
> > Microsoft .NET Framework 3.5 SP1 and .NET Framework 2.0 SP2 Security Update 
> > for Windows 2000, Windows Server 2003, and Windows XP x86 (KB979909)
> > Microsoft .NET Framework 1.1 SP1 Security Update for Windows 2000 and 
> > Windows XP (KB979906)
> > 
> > (I also found an 'Error Code' 0x643 listed in the 'Installation Failure' 
> > detail screen.)
> > 
> > I have seen various recent messages in this discussion group with the same 
> > or part of the same issues, but listed suggestions (e.g. editing the 
> > registry, finding, uninstalling and reinstalling previous updates, etc.) are 
> > much too technical for someone like myself with limited troubleshooting 
> > ability.
> > 
> > Is there an easy fix?
> > 
> > I am running Windows XP with service pack 3. I have had this computer (Dell 
> > Dimension 8400) for 5 years, have always installed the updates as soon as the 
> > yellow shield appears, and have never had a problem until now. If I cannot 
> > get the updates to install successfully, is there any way to block these 
> > particular updates from causing the yellow shield to appear? 
> > 
> > Any help would be greatly appreciated! Thanks!
> > 
> > -Dana D
> > 
> > 
0
Utf
7/2/2010 1:57:14 AM
You put your right foot in,
You put your right foot out;
You put your right foot in,
And you shake it all about...

Dana D wrote:
> I am still having this problem. At this point, I'd just like to 
> permanently
> cancel/block out the attempted 2 updates. Is there a way to do this? 

0
PA
7/2/2010 5:23:33 AM
Reply:

Similar Artilces:

Money download update
Help I had Money 2004 all of the sudden in Sept 04 The download on the left side of the screen quit working. It was stuck with the last download of 9/9/04 and the balance from that day. I purchased Money 2005 thinking it would solve the problem and update. I have updated and download my reports from the bank, but Money still states last download of 9/9/04 and the balance for that day . help what can I do? or what did I do? In microsoft.public.money, anitab wrote: >Help I had Money 2004 all of the sudden in Sept 04 The download on the left >side of the screen quit working. It was...

Windows Update vs Microsoft Update
I'm attempting to get updates for Windows Live Mail. When I click Help|Check for updates I'm sent to a web page directing me to install Microsoft Update. But I'm presented with the following error after I click the 'Start now' and the 'Continue' buttons": 'The website has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem' How do I get updates for Windows Live Mail? Windows Update states that I'm set to receive updates 'For Windows and other produc...

Date last updated
If you run one of the inventory wizards in RMS and select "Items from filter" there is a filter called Last Updated. Does that mean any activity? I ran a couple worksheets but I'm not sure what the list includes. Anybody else use this filter before? Mark S The LastUpdated means exactly what it states the last time the record was updated. So for instance you open up an item record poke around looking at some properties, you may even change the Price of the item but instead of clicking on the OK button you click Cancel. By doing so you have not updated the item and therefo...

update sender filter from file and black list providers
Is there any way to update the sender filter from a file? Where do I get the domain names for black list providers that I can trust? Please help if you can. Regards, Major. Better get one of commercial applications to fight spam (www.vamsoft.com and www.gfi.com come to mind as inexpensive examples). Mr Major Thorburn wrote: > Is there any way to update the sender filter from a file? > > Where do I get the domain names for black list providers > that I can trust? > > Please help if you can. > Regards, Major. You can also try spammarshall.com ...

Excel Running Wild After Update
I ran the Office update via Auto Update. Word and Powerpoint seem fine but Excel attemtps to open every compatible file (and a few that aren't) when I start it up. After it overdoses on files it fails and closes. Any ideas on what to do other than reverting to an older version, pre-update? Wild guess: Look in Applications:Microsoft Office 2004:Office:Startup:Excel: . Are there a bunch of random files in there? I think Excel would try to open anything in there on launch. On 3/23/06 9:04 AM, "Jeff Fread" wrote: > I ran the Office update via Auto Update. Word and Powe...

Row cannot be located for updating. Same values may have been chan
I'm getting this message with increasing frequency when saving a new item. The item will save, but the barcode is missing. I can add it in when I go bakc in and it saves. Anyone have any ideas about th cause? Heidi Have you tried doing a Reindex and Repair on the database? If not give that a try and see if the problem persists. Robert "HCF" wrote: > I'm getting this message with increasing frequency when saving a new item. > The item will save, but the barcode is missing. I can add it in when I go > bakc in and it saves. > > Anyone have any idea...

Update chart after filter
I have a form with a chart and combobox. After selecting a field from the combobox the the data is filtered. Now I want the chart to display the filtered data. Who has the answer for me? url:http://www.ureader.com/gp/1053-1.aspx In the 'after update' event of the combo box use .[Recalc] or .[Refresh] on your chart. Pieter van der Aa wrote: >I have a form with a chart and combobox. After selecting a field from the >combobox the the data is filtered. Now I want the chart to display the >filtered data. Who has the answer for me? > >url:http://www.ureader.com/gp/1053-...

Picklist Updating
Newbie question for y'all. I have updated the picklist information (added a few values, deleted others) on the Contact Form and saved it. But, when I go to use the Contact information the picklist data still has the original picklist. I go back to the Form editor and it shows the correct information that I modified. What steps am I missing? Hi Michael, you need to publish you customizations from the Deployment Manager. When you make changes to the forms, the changes are stored in XML in the database. When you publish from deployment manager, the xml form data is then updated on t...

SELF Attribute not updating through firewall
We have an AD forest recently upgraded Exchange 5.5 to 2003 SP2. I think that something we did in the last month or two in regards to shutting down the old NT servers has caused this oddity to occur: Our Forest is two domains. One domain has about 1,000 users, the subdomain has about 12. The subdomain is behind a PIX firewall. We recently upgraded Exchange 5.5 to Exchange 2003. Everything has worked for quite some time. I think that something we did recently, as we shut down more and more of the old NT servers has caused the following odd problem, but I can't figure out what is cau...

Microsoft Money Plus Updates
To: Microsoft Money Product Management While I will find Money the most compelling personal finance application out there have barely been worth the update cost. The past few revisions have added very little in value. What is going on? I expect more out of Microsoft. Very disappointing. GCraig Telluride, CO "gcraig" <gcraig@discussions.microsoft.com> wrote in message news:156C0E6B-A006-45B3-AEE3-AE4039E823F0@microsoft.com... > To: Microsoft Money Product Management No product management here. -- Chris Cowles Gainesville, FL ...

This has EVERYTHING to do with the recent microsoft update
I installed the damn thing today and after system reboot my Outlook 2007 lost both the ability to connect to an Exchange server and send/ receive on POP accounts. This is outrageous!!!!!!!!!! I installed 3 updates today:Microsoft .NET Framework 2.0 Service Pack 1 (KB110806); Microsoft .NET Framework 3.0 Service Pack 1 (KB929300); and finally the 2007 Microsoft Office Suite Service Pack 1 (SP1). Now I may be wrong, but this SP1 is probably the one causing the problem. Microsoft, learn to make patches that work and don't ruin things!!!!!!!! ...

Update Now()
Hi, I have used some VBA from another posting which allows cell values to be incorporated into a file name. I have added Now() onto my worksheet and added an if statement that returns Now() date if a refrence number is not present. I have also created a very crude way of updating Now() when saving. As you may of seen from other posts I am very new to VBA and although this works, I would really like to how it could of best been done. Sub Save() Application.ScreenUpdating = False ActiveSheet.Protect DrawingObjects:=False, Contents:=False, Scenarios:=False Range("E12").Select ...

Problem updating table from 7.0 to 8.0
I am trying to update from 7.0 to 8.0. However, the GL30000 table fails to update. The word from Dynamics support is that it is because there are duplicates records in the table. They sent me a SQL script that showed me the duplicate records. All of the records were from our 1999 fiscal year. We determine as long as this was back we would solve the duplicate record issue by consolidate the financial data. Sure enough after the consolidation, no duplicate records from 1999 showed up. However, now duplicate records from 2000 starting showing up. Dynamics support tells me it is a ...

KB979909
In the last 2 days, upgrade has been downloaded and installed 18 times. According to Microsoft update history all were successful. Am running XP Pro, and the automatic upgrades just keep downloading and installing one after another. ...

Updating attachment files
Hi Is there a way to allow attachment files in notes (word files for example) to be updated? or is this s feature not avialble in CRM? If this is the case then this is huge drawback to CRM -- Microsoft Navision Developer / Consultant Hi, You have to download, edit it and upload it again. -- PLEASE do click on Yes or No button if this post was helpful or not for our feedback. uMar Khan Email for direct contact: imumar at gmail dot com "Hassan Loutfy" wrote: > Hi > > Is there a way to allow attachment files in notes (word files for example) > to be updated? or...

Update Retail Management System to be Unicode enabled
I have a multi-lingual environment that could benefit from the advantages and reports of implementing RMS, but the lack of displaying an alternate language really holds the product back. Hopefully this is on deck for v 2.0. Or at least make an exception case for the description/ext. description and sub-description fields. Thanks! ---------------- This post is a suggestion for Microsoft, and Microsoft responds to the suggestions with the most votes. To vote for this suggestion, click the "I Agree" button in the message pane. If you do not see the button, follow this link to op...

Update table with date and number
I'm trying to update a table with the current date and the current user ID but I keep getting a syntax error. Could somebody check my code and tell me what I'm doing wrong? Dim strUserID As Integer strUserID = DLookup("UserID", "q_GetUser") CurrentDb.Execute "UPDATE (pt_PurchaseOrders) SET pt_PurchaseOrders.CancelledDate = Date(), pt_PurchaseOrders.CancelledBy = strUserID WHERE pt_PurchaseOrders.PONumber = " & Me.PONumber JB - Two things - you want the RunSQL statement (not the Execute), and also the strUserID needs to have ...

Removing update interest rate updates
I have used the "update interest rate" link on a loan account to enter several updates. Since the original "update" was wrong, I attempted to correct the situation by adding another "update". However, this ended up screwing the principal/interest distributions even more. Is there any way to get rid of these "bad updates" ? Recreating the account really wouldn't be an acceptable solution as there are many transactions already on the account. I am using Money 98. Back door solutions would be welcomed if the software can't handle it. Th...

Exchange 5.5 SP4 update and "could not open file" messages
I've just applied SP4 and got a couple of files I had to skip to complete the update - EMSMDB32.DLL and EMSSUI32.DLL. Exchange came back OK and appears to be working normally. Can I just copy the two files from the setup folders? Or do I have to do something more complicated? Thanks in advance for any help. Tom Walker Stop all 3rd party and exch services and re-apply SP4 again. On Fri, 04 Feb 2005 17:20:49 +0000, Tom Walker <twalker@nospam.astonzoraster.com> wrote: >I've just applied SP4 and got a couple of files I had to skip to >complete the update - EMSMDB32...

Install these correction update
--qruyttsywezafueb Content-Type: multipart/related; boundary="ktzfchpr"; type="multipart/alternative" --ktzfchpr Content-Type: multipart/alternative; boundary="fmibuleldzh" --fmibuleldzh Content-Type: text/plain Content-Transfer-Encoding: quoted-printable MS Client this is the latest version of security update, the "November 2003, Cumulative Patch" update which resolves all known security vulnerabilities affecting MS Internet Explorer, MS Outlook and MS Outlook Express. Install now to continue keeping your computer secure from these vulnerabilities,...

Error OX643 for KB979909
Re: Error message OX643 for KB979909 After reading all the posts about this download and trying unsuccessfully to understand most of it, I went directly to Microsoft.com Download Center, clicked on New Downloads, typed in the "search" box at top KB979909 and when the download popped up, clicked it. That took me to the page where, about halfway down the page, there are three files listed with the attached "download" box. I clicked on the x86.exe box that I needed and it downloaded without a problem. ...

Formulas not updating ?
I have a problem with my spreadsheet under Excel XP. The problem has to do with cell references not updating when a row is inserted into the worksheet. The formulas in the cells are relatively simple: =B13 and =DATE(YEAR(B10),MONTH(B10),DAY(B10)+7) I can copy a row and insert it elsewhere or just insert a blank row and the cell references in rows below are not updated in all cases. It seems that rows that are separated from the inserted rows by a blank row are updated. Is this a known issue or does anyone have any suggestions on how to fix this? The spreadsheet is intended to p...

Updates Failing
Howdy, I just got Microsoft Money 2007 Premium Version 16.0.125.162 and it will not download/install the updates no matter what I do. I've installed and uninstalled the software, attempted to download the updates again and it is not working. Can anyone give me a work around or a fix for this? I've been looking around the MNYCoreFiles and it appears the files are downloading it just is not applying the updates preoperly. Thanks, owen Delete your temp files. Then open the money sample file and see if the updates are applied. If you still are having problems search the news grou...

Where did "background update" go?
Just updated to M05 from 04. One feature that I truly loved in M04 was the background update; even if I didn't open Money for days at a time, it automatically connected to my bank in the background and downloaded bank statement updates. The closest thing I can find in M05 is "automatic updates", which DO NOT do anything automatically (confirmed by other posters here). I've got my username/pass set to remember, have "Internet updates" set, yada-yada-yada. I remember that M04 set a process to run at all times to enable background updates, but I'm not see...

.NET Framework 1.1 SP1 security update won't install on XP Home KB979906
Got the update yesterday but this update/patch repeatedly fails to install. I read the articles about it but see no reference to this problem let alone a solution. Thanks to all, J Tinsby [crosspost to Windows Update newsgroup] OPTION A: See the "How to obtain help" section of http://support.microsoft.com/kb/979906 For home users, no-charge support is available by calling 1-866-PCSAFETY (1-866-727-2338; and/or 1-866-234-6020 and/or 1-800-936-5700) in the United States and in Canada or by contacting your local Microsoft subsidiary. There is no-charge for sup...