KB977816 fails to apply to 2000 server

KB977816 fails to apply to 2000 server. After server reboots, update 
reappears and asks to be installed. I have noted that tech support has asked 
for the windowsupdate.log and the updateshandler.log in other incidents. The 
windows update.log is below, however I did not find an updateshandler.log (or 
anything close) on the server. I did find the KB977816.log and that also 
follows.

 

The following errors are in the system log:

______________________________________

 

4/26 16:01  

Event Type:        Error

Event Source:    Windows Update Agent

Event Category:                Installation 

Event ID:              20

Date:                     4/26/2010

Time:                     4:01:04 PM

User:                     N/A

Computer:          server1

Description:

Installation Failure: Windows failed to install the following update with 
error 0x80242007: Security Update for Windows 2000 (KB977816). 

Data:

0000: 57 69 6e 33 32 48 52 65   Win32HRe

0008: 73 75 6c 74 3d 30 78 38   sult=0x8

0010: 30 32 34 32 30 30 37 20   0242007 

0018: 55 70 64 61 74 65 49 44   UpdateID

0020: 3d 7b 31 44 37 37 37 34   ={1D7774

0028: 36 31 2d 42 35 37 41 2d   61-B57A-

0030: 34 33 31 35 2d 39 39 41   4315-99A

0038: 35 2d 33 35 32 44 38 31   5-352D81

0040: 34 30 44 42 44 46 7d 20   40DBDF} 

0048: 52 65 76 69 73 69 6f 6e   Revision

0050: 4e 75 6d 62 65 72 3d 31   Number=1

0058: 30 31 20 00               01 .    

 

 

Event Type:        Error

Event Source:    Windows Update Agent

Event Category:                Installation 

Event ID:              20

Date:                     5/3/2010

Time:                     4:00:17 PM

User:                     N/A

Computer:          server1

Description:

Installation Failure: Windows failed to install the following update with 
error 0x80242007: Security Update for Windows 2000 (KB977816). 

Data:

0000: 57 69 6e 33 32 48 52 65   Win32HRe

0008: 73 75 6c 74 3d 30 78 38   sult=0x8

0010: 30 32 34 32 30 30 37 20   0242007 

0018: 55 70 64 61 74 65 49 44   UpdateID

0020: 3d 7b 31 44 37 37 37 34   ={1D7774

0028: 36 31 2d 42 35 37 41 2d   61-B57A-

0030: 34 33 31 35 2d 39 39 41   4315-99A

0038: 35 2d 33 35 32 44 38 31   5-352D81

0040: 34 30 44 42 44 46 7d 20   40DBDF} 

0048: 52 65 76 69 73 69 6f 6e   Revision

0050: 4e 75 6d 62 65 72 3d 31   Number=1

0058: 30 31 20 00               01 .    

 

Event Type:        Error

Event Source:    Windows Update Agent

Event Category:                Installation 

Event ID:              20

Date:                     5/10/2010

Time:                     4:00:15 PM

User:                     N/A

Computer:          server1

Description:

Installation Failure: Windows failed to install the following update with 
error 0x80242007: Security Update for Windows 2000 (KB977816). 

Data:

0000: 57 69 6e 33 32 48 52 65   Win32HRe

0008: 73 75 6c 74 3d 30 78 38   sult=0x8

0010: 30 32 34 32 30 30 37 20   0242007 

0018: 55 70 64 61 74 65 49 44   UpdateID

0020: 3d 7b 31 44 37 37 37 34   ={1D7774

0028: 36 31 2d 42 35 37 41 2d   61-B57A-

0030: 34 33 31 35 2d 39 39 41   4315-99A

0038: 35 2d 33 35 32 44 38 31   5-352D81

0040: 34 30 44 42 44 46 7d 20   40DBDF} 

0048: 52 65 76 69 73 69 6f 6e   Revision

0050: 4e 75 6d 62 65 72 3d 31   Number=1

0058: 30 31 20 00               01 .    

 

__________________________________________________________________________

 

Following is from the kb977816.log

[KB977816.log]

 

0.062: 
================================================================================

0.062: 2010/05/01 22:00:11.654 (local)

0.062: 

 

C:\WINNT\SoftwareDistribution\Download\586671b6e88709181e116629645af021\update\update.exe 

 

(version 6.3.13.0)

0.062: Failed To Enable SE_SHUTDOWN_PRIVILEGE

0.062: Hotfix started with following command line: -q -z -er 

 

/ParentInfo:29aeabc414be3642a2395dea1597b201 

0.062:   1339 GetBuildType:  noop for OS 5.0

0.062:  C:\WINNT\system32\l3codecx.ax is Present

0.062: First Condition in Test.Exist.WM.Section.wm Succeeded

0.062: Condition succeeded for section Test.Exist.WM.Section.wm in Line 1 of 
PreRequisite 

0.562: In Function TestVolatileFlag, line 11825, RegOpenKeyEx failed with 
error 0x2

0.562: In Function TestVolatileFlag, line 11857, RegOpenKeyEx failed with 
error 0x2

0.562: DoInstallation: CleanPFR failed: 0x2 

0.562:   1339 GetBuildType:  noop for OS 5.0

0.562: SetProductTypes: InfProductBuildType=BuildType.IS

0.578: SetAltOsLoaderPath: No section uses DirId 65701; done.

0.578:  C:\WINNT\system32\l3codecx.ax is Present

0.578: Condition succeeded for section Test.Exist.WM64.Section.1 in Line 1 of 

 

Condition.WM64.Section 

0.578: FileVersion of C:\WINNT\system32\l3codecx.ax is Greater or Equal To 
1.5.0.00

0.578: Condition succeeded for section Test.Exist.WM64.Section.2 in Line 2 of 

 

Condition.WM64.Section 

0.578: FileVersion of C:\WINNT\system32\l3codecx.ax is Less Or Equal To  
1.6.0.99

0.578: Condition succeeded for section Test.UpperVersionCheck.WM64.Section.1 
in Line 3 of 

 

Condition.WM64.Section 

0.578:  C:\WINNT\system32\l3codeca.acm is Not Present

0.578: Condition Check for Line 1 of Condition.WM9.Section returned FALSE 

0.578: DoInstallation: FetchSourceURL for 

 

c:\winnt\softwaredistribution\download\586671b6e88709181e116629645af021\update\update.inf 

 

failed

0.578: CreateUninstall = 1,Directory = C:\WINNT\$NtUninstallKB977816_WM9$ 

0.578: LoadFileQueues: UpdSpGetSourceFileLocation for halmacpi.dll failed: 
0xe0000102

0.578: BuildCabinetManifest: update.url absent

0.578: Starting AnalyzeComponents

0.578: AnalyzePhaseZero used 0 ticks

0.594: OEM file scan used 0 ticks

0.594: AnalyzePhaseOne: used 16 ticks

0.594: AnalyzeComponents: Hotpatch analysis disabled; skipping.

0.594: AnalyzeComponents: Hotpatching is disabled.

0.609: AnalyzePhaseTwo used 15 ticks

0.609: AnalyzePhaseThree used 0 ticks

0.609: AnalyzePhaseFive used 0 ticks

0.609: AnalyzePhaseSix used 0 ticks

0.609: AnalyzeComponents used 31 ticks

0.609: Downloading 0 files

0.609: bPatchMode = FALSE

0.609: Inventory complete: ReturnStatus=0, 31 ticks

0.609: Num Ticks for invent : 31

0.609: Allocation size of drive C: is 512 bytes, free space = 9349340160 bytes

0.609: AnalyzeDiskUsage:  Skipping EstimateDiskUsageForUninstall.

0.609: Drive C: free 8916MB req: 6MB w/uninstall: NOT CALCULATED.

0.609: CabinetBuild complete

0.609: Num Ticks for Cabinet build : 0

0.609: DynamicStrings section not defined or empty.

0.609: FileInUse:: Added to Filelist: c:\winnt\kb977816.cat

0.609: FileInUse:: Added to Filelist: c:\winnt\system32\l3codecx.ax

0.609: FileInUse:: Added to Filelist: c:\winnt\system32\dllcache\l3codecx.ax

 

The following is from the windowsupdate.log :

 

 

 

2010-04-21          03:07:11:866       1156       488         AU          
#############

2010-04-21          03:07:11:866       1156       488         AU          ## 
START ##  AU: Search for updates

2010-04-21          03:07:11:866       1156       488         AU          
#########

2010-04-21          03:07:11:866       1156       488         AU          
<<## SUBMITTED ## AU: Search for updates [CallId = 
{6A365DDD-AF2C-49DD-BC75-F6DFEC761467}]

2010-04-21          03:07:11:866       1156       6e4         Agent    
*************

2010-04-21          03:07:11:866       1156       6e4         Agent    ** 
START **  Agent: Finding updates [CallerId = AutomaticUpdates]

2010-04-21          03:07:11:866       1156       6e4         Agent    
*********

2010-04-21          03:07:11:866       1156       6e4         Agent      * 
Online = Yes; Ignore download priority = No

2010-04-21          03:07:11:866       1156       6e4         Agent      * 
Criteria = "IsHidden=0 and IsInstalled=0 and DeploymentAction='Installation' 
and IsAssigned=1 or IsHidden=0 and IsPresent=1 and 

 

DeploymentAction='Uninstallation' and IsAssigned=1 or IsHidden=0 and 
IsInstalled=1 and DeploymentAction='Installation' and IsAssigned=1 and 
RebootRequired=1 or IsHidden=0 and IsInstalled=0 and 

 

DeploymentAction='Uninstallation' and IsAssigned=1 and RebootRequired=1"

2010-04-21          03:07:11:866       1156       6e4         Agent      * 
ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed

2010-04-21          03:07:11:866       1156       6e4         Agent      * 
Search Scope = {Machine}

2010-04-21          03:07:13:288       1156       6e4         Misc       
Validating signature for 
C:\WINNT\SoftwareDistribution\SelfUpdate\Default\wuident.cab:

2010-04-21          03:07:13:288       1156       6e4         Misc       
Microsoft signed: Yes

2010-04-21          03:07:20:101       1156       6e4         Misc       
Validating signature for 
C:\WINNT\SoftwareDistribution\SelfUpdate\Default\wuident.cab:

2010-04-21          03:07:20:101       1156       6e4         Misc       
Microsoft signed: Yes

2010-04-21          03:07:20:179       1156       6e4         Misc       
Validating signature for 
C:\WINNT\SoftwareDistribution\SelfUpdate\Default\wsus3setup.cab:

2010-04-21          03:07:20:179       1156       6e4         Misc       
Microsoft signed: Yes

2010-04-21          03:07:20:194       1156       6e4         Setup    
***********  Setup: Checking whether self-update is required  ***********

2010-04-21          03:07:20:194       1156       6e4         Setup      * 
Inf file: C:\WINNT\SoftwareDistribution\SelfUpdate\Default\wsus3setup.inf

2010-04-21          03:07:20:194       1156       6e4         Setup    
Update NOT required for C:\WINNT\system32\cdm.dll: target version = 
7.4.7600.226, required version = 7.4.7600.226

2010-04-21          03:07:20:194       1156       6e4         Setup    
Update NOT required for C:\WINNT\system32\wuapi.dll: target version = 
7.4.7600.226, required version = 7.4.7600.226

2010-04-21          03:07:20:194       1156       6e4         Setup    
Update NOT required for C:\WINNT\system32\wuapi.dll.mui: target version = 
7.4.7600.226, required version = 7.4.7600.226

2010-04-21          03:07:20:194       1156       6e4         Setup    
Update NOT required for C:\WINNT\system32\wuauclt.exe: target version = 
7.4.7600.226, required version = 7.4.7600.226

2010-04-21          03:07:20:194       1156       6e4         Setup    
Update NOT required for C:\WINNT\system32\wuaucpl.cpl: target version = 
7.4.7600.226, required version = 7.4.7600.226

2010-04-21          03:07:20:194       1156       6e4         Setup    
Update NOT required for C:\WINNT\system32\wuaucpl.cpl.mui: target version = 
7.4.7600.226, required version = 7.4.7600.226

2010-04-21          03:07:20:194       1156       6e4         Setup    
Update NOT required for C:\WINNT\system32\wuaueng.dll: target version = 
7.4.7600.226, required version = 7.4.7600.226

2010-04-21          03:07:20:194       1156       6e4         Setup    
Update NOT required for C:\WINNT\system32\wuaueng.dll.mui: target version = 
7.4.7600.226, required version = 7.4.7600.226

2010-04-21          03:07:20:194       1156       6e4         Setup    
Update NOT required for C:\WINNT\system32\wucltui.dll: target version = 
7.4.7600.226, required version = 7.4.7600.226

2010-04-21          03:07:20:194       1156       6e4         Setup    
Update NOT required for C:\WINNT\system32\wucltui.dll.mui: target version = 
7.4.7600.226, required version = 7.4.7600.226

2010-04-21          03:07:20:194       1156       6e4         Setup    
Update NOT required for C:\WINNT\system32\wups.dll: target version = 
7.4.7600.226, required version = 7.4.7600.226

2010-04-21          03:07:20:194       1156       6e4         Setup    
Update NOT required for C:\WINNT\system32\wups2.dll: target version = 
7.4.7600.226, required version = 7.4.7600.226

2010-04-21          03:07:20:194       1156       6e4         Setup    
Update NOT required for C:\WINNT\system32\wuweb.dll: target version = 
7.4.7600.226, required version = 7.4.7600.226

2010-04-21          03:07:20:194       1156       6e4         Setup      * 
IsUpdateRequired = No


0
Utf
5/17/2010 5:37:01 PM
windowsupdate 1336 articles. 0 followers. Follow

9 Replies
1224 Views

Similar Articles

[PageSpeed] 13

See the "How to obtain help" section of 
http://support.microsoft.com/kb/977816

For home users, no-charge support is available by calling 1-866-PCSAFETY 
(1-866-727-2338; and/or 1-866-234-6020 and/or 1-800-936-5700) in the United 
States and in Canada or by contacting your local Microsoft subsidiary. 
There is no-charge for support calls that are associated with security 
updates.  When you call, clearly state that your problem is related to a 
Security Update and cite the update's KB number (e.g., KB977816).

Or you can...

Start a free Windows Update support incident email request:
https://support.microsoft.com/oas/default.aspx?gprid=6527

Customers who experience issues installing Microsoft security updates also 
can visit the following page for assistance: 
https://consumersecuritysupport.microsoft.com/

For more information about how to contact your local Microsoft subsidiary 
for security update support issues, visit the International Support Web 
site: http://support.microsoft.com/common/international.aspx

For enterprise customers, support for security updates is available through 
your usual support contacts.
-- 
~Robear Dyer (PA Bear)
MS MVP-IE, Mail, Security, Windows Client - since 2002


azentech2 wrote:
> KB977816 fails to apply to 2000 server. After server reboots, update
> reappears and asks to be installed. I have noted that tech support has 
> asked
> for the windowsupdate.log and the updateshandler.log in other incidents. 
> The
> windows update.log is below, however I did not find an updateshandler.log
> (or anything close) on the server. I did find the KB977816.log and that 
> also
> follows.
>
>
>
> The following errors are in the system log:
>
> ______________________________________
>
>
>
> 4/26 16:01
>
> Event Type:        Error
>
> Event Source:    Windows Update Agent
>
> Event Category:                Installation
>
> Event ID:              20
>
> Date:                     4/26/2010
>
> Time:                     4:01:04 PM
>
> User:                     N/A
>
> Computer:          server1
>
> Description:
>
> Installation Failure: Windows failed to install the following update with
> error 0x80242007: Security Update for Windows 2000 (KB977816).
>
> Data:
>
> 0000: 57 69 6e 33 32 48 52 65   Win32HRe
>
> 0008: 73 75 6c 74 3d 30 78 38   sult=0x8
>
> 0010: 30 32 34 32 30 30 37 20   0242007
>
> 0018: 55 70 64 61 74 65 49 44   UpdateID
>
> 0020: 3d 7b 31 44 37 37 37 34   ={1D7774
>
> 0028: 36 31 2d 42 35 37 41 2d   61-B57A-
>
> 0030: 34 33 31 35 2d 39 39 41   4315-99A
>
> 0038: 35 2d 33 35 32 44 38 31   5-352D81
>
> 0040: 34 30 44 42 44 46 7d 20   40DBDF}
>
> 0048: 52 65 76 69 73 69 6f 6e   Revision
>
> 0050: 4e 75 6d 62 65 72 3d 31   Number=1
>
> 0058: 30 31 20 00               01 .
<SNIP> 

0
PA
5/17/2010 10:57:44 PM
This has been reported many times in different newsgroups. The Update or any Update 
for Windows 2000 will not install since the install file has been pulled.It still 
shows but it is an empty file .You can see this yourself if you try and download 
that file manually. It will not download. Windows 2000 and all updates for it in 
essence is dead. Microsoft pulled it from their sites according to the agreement 
between Sun and the DOJ

-- 
Peter

Please Reply to Newsgroup for the benefit of others
Requests for assistance by email can not and will not be acknowledged.
http://www.microsoft.com/protect

"azentech2" <azentech2@discussions.microsoft.com> wrote in message 
news:186E9874-EF9D-4DAE-BD85-E306812B328A@microsoft.com...
> KB977816 fails to apply to 2000 server. After server reboots, update
> reappears and asks to be installed. I have noted that tech support has asked
> for the windowsupdate.log and the updateshandler.log in other incidents. The
> windows update.log is below, however I did not find an updateshandler.log (or
> anything close) on the server. I did find the KB977816.log and that also
> follows.
>
>
>
> The following errors are in the system log:
>
> ______________________________________
>
>
>
> 4/26 16:01
>
> Event Type:        Error
>
> Event Source:    Windows Update Agent
>
> Event Category:                Installation
>
> Event ID:              20
>
> Date:                     4/26/2010
>
> Time:                     4:01:04 PM
>
> User:                     N/A
>
> Computer:          server1
>
> Description:
>
> Installation Failure: Windows failed to install the following update with
> error 0x80242007: Security Update for Windows 2000 (KB977816).
>
> Data:
>
> 0000: 57 69 6e 33 32 48 52 65   Win32HRe
>
> 0008: 73 75 6c 74 3d 30 78 38   sult=0x8
>
> 0010: 30 32 34 32 30 30 37 20   0242007
>
> 0018: 55 70 64 61 74 65 49 44   UpdateID
>
> 0020: 3d 7b 31 44 37 37 37 34   ={1D7774
>
> 0028: 36 31 2d 42 35 37 41 2d   61-B57A-
>
> 0030: 34 33 31 35 2d 39 39 41   4315-99A
>
> 0038: 35 2d 33 35 32 44 38 31   5-352D81
>
> 0040: 34 30 44 42 44 46 7d 20   40DBDF}
>
> 0048: 52 65 76 69 73 69 6f 6e   Revision
>
> 0050: 4e 75 6d 62 65 72 3d 31   Number=1
>
> 0058: 30 31 20 00               01 .
>
>
>
>
>
> Event Type:        Error
>
> Event Source:    Windows Update Agent
>
> Event Category:                Installation
>
> Event ID:              20
>
> Date:                     5/3/2010
>
> Time:                     4:00:17 PM
>
> User:                     N/A
>
> Computer:          server1
>
> Description:
>
> Installation Failure: Windows failed to install the following update with
> error 0x80242007: Security Update for Windows 2000 (KB977816).
>
> Data:
>
> 0000: 57 69 6e 33 32 48 52 65   Win32HRe
>
> 0008: 73 75 6c 74 3d 30 78 38   sult=0x8
>
> 0010: 30 32 34 32 30 30 37 20   0242007
>
> 0018: 55 70 64 61 74 65 49 44   UpdateID
>
> 0020: 3d 7b 31 44 37 37 37 34   ={1D7774
>
> 0028: 36 31 2d 42 35 37 41 2d   61-B57A-
>
> 0030: 34 33 31 35 2d 39 39 41   4315-99A
>
> 0038: 35 2d 33 35 32 44 38 31   5-352D81
>
> 0040: 34 30 44 42 44 46 7d 20   40DBDF}
>
> 0048: 52 65 76 69 73 69 6f 6e   Revision
>
> 0050: 4e 75 6d 62 65 72 3d 31   Number=1
>
> 0058: 30 31 20 00               01 .
>
>
>
> Event Type:        Error
>
> Event Source:    Windows Update Agent
>
> Event Category:                Installation
>
> Event ID:              20
>
> Date:                     5/10/2010
>
> Time:                     4:00:15 PM
>
> User:                     N/A
>
> Computer:          server1
>
> Description:
>
> Installation Failure: Windows failed to install the following update with
> error 0x80242007: Security Update for Windows 2000 (KB977816).
>
> Data:
>
> 0000: 57 69 6e 33 32 48 52 65   Win32HRe
>
> 0008: 73 75 6c 74 3d 30 78 38   sult=0x8
>
> 0010: 30 32 34 32 30 30 37 20   0242007
>
> 0018: 55 70 64 61 74 65 49 44   UpdateID
>
> 0020: 3d 7b 31 44 37 37 37 34   ={1D7774
>
> 0028: 36 31 2d 42 35 37 41 2d   61-B57A-
>
> 0030: 34 33 31 35 2d 39 39 41   4315-99A
>
> 0038: 35 2d 33 35 32 44 38 31   5-352D81
>
> 0040: 34 30 44 42 44 46 7d 20   40DBDF}
>
> 0048: 52 65 76 69 73 69 6f 6e   Revision
>
> 0050: 4e 75 6d 62 65 72 3d 31   Number=1
>
> 0058: 30 31 20 00               01 .
>
>
>
> __________________________________________________________________________
>
>
>
> Following is from the kb977816.log
>
> [KB977816.log]
>
>
>
> 0.062:
> ================================================================================
>
> 0.062: 2010/05/01 22:00:11.654 (local)
>
> 0.062:
>
>
>
> C:\WINNT\SoftwareDistribution\Download\586671b6e88709181e116629645af021\update\update.exe
>
>
>
> (version 6.3.13.0)
>
> 0.062: Failed To Enable SE_SHUTDOWN_PRIVILEGE
>
> 0.062: Hotfix started with following command line: -q -z -er
>
>
>
> /ParentInfo:29aeabc414be3642a2395dea1597b201
>
> 0.062:   1339 GetBuildType:  noop for OS 5.0
>
> 0.062:  C:\WINNT\system32\l3codecx.ax is Present
>
> 0.062: First Condition in Test.Exist.WM.Section.wm Succeeded
>
> 0.062: Condition succeeded for section Test.Exist.WM.Section.wm in Line 1 of
> PreRequisite
>
> 0.562: In Function TestVolatileFlag, line 11825, RegOpenKeyEx failed with
> error 0x2
>
> 0.562: In Function TestVolatileFlag, line 11857, RegOpenKeyEx failed with
> error 0x2
>
> 0.562: DoInstallation: CleanPFR failed: 0x2
>
> 0.562:   1339 GetBuildType:  noop for OS 5.0
>
> 0.562: SetProductTypes: InfProductBuildType=BuildType.IS
>
> 0.578: SetAltOsLoaderPath: No section uses DirId 65701; done.
>
> 0.578:  C:\WINNT\system32\l3codecx.ax is Present
>
> 0.578: Condition succeeded for section Test.Exist.WM64.Section.1 in Line 1 of
>
>
>
> Condition.WM64.Section
>
> 0.578: FileVersion of C:\WINNT\system32\l3codecx.ax is Greater or Equal To
> 1.5.0.00
>
> 0.578: Condition succeeded for section Test.Exist.WM64.Section.2 in Line 2 of
>
>
>
> Condition.WM64.Section
>
> 0.578: FileVersion of C:\WINNT\system32\l3codecx.ax is Less Or Equal To
> 1.6.0.99
>
> 0.578: Condition succeeded for section Test.UpperVersionCheck.WM64.Section.1
> in Line 3 of
>
>
>
> Condition.WM64.Section
>
> 0.578:  C:\WINNT\system32\l3codeca.acm is Not Present
>
> 0.578: Condition Check for Line 1 of Condition.WM9.Section returned FALSE
>
> 0.578: DoInstallation: FetchSourceURL for
>
>
>
> c:\winnt\softwaredistribution\download\586671b6e88709181e116629645af021\update\update.inf
>
>
>
> failed
>
> 0.578: CreateUninstall = 1,Directory = C:\WINNT\$NtUninstallKB977816_WM9$
>
> 0.578: LoadFileQueues: UpdSpGetSourceFileLocation for halmacpi.dll failed:
> 0xe0000102
>
> 0.578: BuildCabinetManifest: update.url absent
>
> 0.578: Starting AnalyzeComponents
>
> 0.578: AnalyzePhaseZero used 0 ticks
>
> 0.594: OEM file scan used 0 ticks
>
> 0.594: AnalyzePhaseOne: used 16 ticks
>
> 0.594: AnalyzeComponents: Hotpatch analysis disabled; skipping.
>
> 0.594: AnalyzeComponents: Hotpatching is disabled.
>
> 0.609: AnalyzePhaseTwo used 15 ticks
>
> 0.609: AnalyzePhaseThree used 0 ticks
>
> 0.609: AnalyzePhaseFive used 0 ticks
>
> 0.609: AnalyzePhaseSix used 0 ticks
>
> 0.609: AnalyzeComponents used 31 ticks
>
> 0.609: Downloading 0 files
>
> 0.609: bPatchMode = FALSE
>
> 0.609: Inventory complete: ReturnStatus=0, 31 ticks
>
> 0.609: Num Ticks for invent : 31
>
> 0.609: Allocation size of drive C: is 512 bytes, free space = 9349340160 bytes
>
> 0.609: AnalyzeDiskUsage:  Skipping EstimateDiskUsageForUninstall.
>
> 0.609: Drive C: free 8916MB req: 6MB w/uninstall: NOT CALCULATED.
>
> 0.609: CabinetBuild complete
>
> 0.609: Num Ticks for Cabinet build : 0
>
> 0.609: DynamicStrings section not defined or empty.
>
> 0.609: FileInUse:: Added to Filelist: c:\winnt\kb977816.cat
>
> 0.609: FileInUse:: Added to Filelist: c:\winnt\system32\l3codecx.ax
>
> 0.609: FileInUse:: Added to Filelist: c:\winnt\system32\dllcache\l3codecx.ax
>
>
>
> The following is from the windowsupdate.log :
>
>
>
>
>
>
>
> 2010-04-21          03:07:11:866       1156       488         AU
> #############
>
> 2010-04-21          03:07:11:866       1156       488         AU          ##
> START ##  AU: Search for updates
>
> 2010-04-21          03:07:11:866       1156       488         AU
> #########
>
> 2010-04-21          03:07:11:866       1156       488         AU
> <<## SUBMITTED ## AU: Search for updates [CallId =
> {6A365DDD-AF2C-49DD-BC75-F6DFEC761467}]
>
> 2010-04-21          03:07:11:866       1156       6e4         Agent
> *************
>
> 2010-04-21          03:07:11:866       1156       6e4         Agent    **
> START **  Agent: Finding updates [CallerId = AutomaticUpdates]
>
> 2010-04-21          03:07:11:866       1156       6e4         Agent
> *********
>
> 2010-04-21          03:07:11:866       1156       6e4         Agent      *
> Online = Yes; Ignore download priority = No
>
> 2010-04-21          03:07:11:866       1156       6e4         Agent      *
> Criteria = "IsHidden=0 and IsInstalled=0 and DeploymentAction='Installation'
> and IsAssigned=1 or IsHidden=0 and IsPresent=1 and
>
>
>
> DeploymentAction='Uninstallation' and IsAssigned=1 or IsHidden=0 and
> IsInstalled=1 and DeploymentAction='Installation' and IsAssigned=1 and
> RebootRequired=1 or IsHidden=0 and IsInstalled=0 and
>
>
>
> DeploymentAction='Uninstallation' and IsAssigned=1 and RebootRequired=1"
>
> 2010-04-21          03:07:11:866       1156       6e4         Agent      *
> ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
>
> 2010-04-21          03:07:11:866       1156       6e4         Agent      *
> Search Scope = {Machine}
>
> 2010-04-21          03:07:13:288       1156       6e4         Misc
> Validating signature for
> C:\WINNT\SoftwareDistribution\SelfUpdate\Default\wuident.cab:
>
> 2010-04-21          03:07:13:288       1156       6e4         Misc
> Microsoft signed: Yes
>
> 2010-04-21          03:07:20:101       1156       6e4         Misc
> Validating signature for
> C:\WINNT\SoftwareDistribution\SelfUpdate\Default\wuident.cab:
>
> 2010-04-21          03:07:20:101       1156       6e4         Misc
> Microsoft signed: Yes
>
> 2010-04-21          03:07:20:179       1156       6e4         Misc
> Validating signature for
> C:\WINNT\SoftwareDistribution\SelfUpdate\Default\wsus3setup.cab:
>
> 2010-04-21          03:07:20:179       1156       6e4         Misc
> Microsoft signed: Yes
>
> 2010-04-21          03:07:20:194       1156       6e4         Setup
> ***********  Setup: Checking whether self-update is required  ***********
>
> 2010-04-21          03:07:20:194       1156       6e4         Setup      *
> Inf file: C:\WINNT\SoftwareDistribution\SelfUpdate\Default\wsus3setup.inf
>
> 2010-04-21          03:07:20:194       1156       6e4         Setup
> Update NOT required for C:\WINNT\system32\cdm.dll: target version =
> 7.4.7600.226, required version = 7.4.7600.226
>
> 2010-04-21          03:07:20:194       1156       6e4         Setup
> Update NOT required for C:\WINNT\system32\wuapi.dll: target version =
> 7.4.7600.226, required version = 7.4.7600.226
>
> 2010-04-21          03:07:20:194       1156       6e4         Setup
> Update NOT required for C:\WINNT\system32\wuapi.dll.mui: target version =
> 7.4.7600.226, required version = 7.4.7600.226
>
> 2010-04-21          03:07:20:194       1156       6e4         Setup
> Update NOT required for C:\WINNT\system32\wuauclt.exe: target version =
> 7.4.7600.226, required version = 7.4.7600.226
>
> 2010-04-21          03:07:20:194       1156       6e4         Setup
> Update NOT required for C:\WINNT\system32\wuaucpl.cpl: target version =
> 7.4.7600.226, required version = 7.4.7600.226
>
> 2010-04-21          03:07:20:194       1156       6e4         Setup
> Update NOT required for C:\WINNT\system32\wuaucpl.cpl.mui: target version =
> 7.4.7600.226, required version = 7.4.7600.226
>
> 2010-04-21          03:07:20:194       1156       6e4         Setup
> Update NOT required for C:\WINNT\system32\wuaueng.dll: target version =
> 7.4.7600.226, required version = 7.4.7600.226
>
> 2010-04-21          03:07:20:194       1156       6e4         Setup
> Update NOT required for C:\WINNT\system32\wuaueng.dll.mui: target version =
> 7.4.7600.226, required version = 7.4.7600.226
>
> 2010-04-21          03:07:20:194       1156       6e4         Setup
> Update NOT required for C:\WINNT\system32\wucltui.dll: target version =
> 7.4.7600.226, required version = 7.4.7600.226
>
> 2010-04-21          03:07:20:194       1156       6e4         Setup
> Update NOT required for C:\WINNT\system32\wucltui.dll.mui: target version =
> 7.4.7600.226, required version = 7.4.7600.226
>
> 2010-04-21          03:07:20:194       1156       6e4         Setup
> Update NOT required for C:\WINNT\system32\wups.dll: target version =
> 7.4.7600.226, required version = 7.4.7600.226
>
> 2010-04-21          03:07:20:194       1156       6e4         Setup
> Update NOT required for C:\WINNT\system32\wups2.dll: target version =
> 7.4.7600.226, required version = 7.4.7600.226
>
> 2010-04-21          03:07:20:194       1156       6e4         Setup
> Update NOT required for C:\WINNT\system32\wuweb.dll: target version =
> 7.4.7600.226, required version = 7.4.7600.226
>
> 2010-04-21          03:07:20:194       1156       6e4         Setup      *
> IsUpdateRequired = No
>
> 

0
Peter
5/18/2010 3:50:05 AM
"Peter Foldes" <maci252211@hotmail.com> wrote in message 
news:uM7kv0j9KHA.508@TK2MSFTNGP06.phx.gbl...
> You can see this yourself if you try and download that file manually. It 
> will not download.

I just downloaded it from here:
http://www.microsoft.com/downloads/details.aspx?familyid=F6394FC2-B9D0-46CF-9265-A0D4AEB1448F&displaylang=en

Apparently the update is still available. I'm having the same problem as OP 
but mine is a Win2000 Pro machine.

> Windows 2000 and all updates for it in essence is dead. Microsoft pulled 
> it from their sites according to the agreement between Sun and the DOJ

What agreement? 


0
John
5/18/2010 4:08:07 PM
Then you have the same issue and the same answer from me.

Microsoft lost the case which was brought against them by Sun Microsystems for using 
their technology. The agreement was that MS will discontinue Support (which was done 
at a very early stage ) and stop all aspects of Windows 2000 including updates. This 
was completed at some point last year by MS. In essence Windows 2000 in all flavors 
is dead as far as updating among others

-- 
Peter

Please Reply to Newsgroup for the benefit of others
Requests for assistance by email can not and will not be acknowledged.
http://www.microsoft.com/protect

"John" <a> wrote in message news:%23aFxPRq9KHA.5592@TK2MSFTNGP02.phx.gbl...
>
> "Peter Foldes" <maci252211@hotmail.com> wrote in message 
> news:uM7kv0j9KHA.508@TK2MSFTNGP06.phx.gbl...
>> You can see this yourself if you try and download that file manually. It will not 
>> download.
>
> I just downloaded it from here:
> http://www.microsoft.com/downloads/details.aspx?familyid=F6394FC2-B9D0-46CF-9265-A0D4AEB1448F&displaylang=en
>
> Apparently the update is still available. I'm having the same problem as OP but 
> mine is a Win2000 Pro machine.
>
>> Windows 2000 and all updates for it in essence is dead. Microsoft pulled it from 
>> their sites according to the agreement between Sun and the DOJ
>
> What agreement?
> 

0
Peter
5/18/2010 5:16:09 PM
That doesn't seem to make sense as this kb977816 is listed as a security 
update by Microsoft yet see: 
http://www.microsoft.com/technet/security/Bulletin/MS10-026.mspx. It says its 
related to codecs:
This security update resolves a privately reported vulnerability in 
Microsoft MPEG Layer-3 audio codecs. The vulnerability could allow remote 
code execution if a user opened a specially crafted AVI file containing an 
MPEG Layer-3 audio stream. If a user is logged on with administrative user 
rights, an attacker who successfully exploited this vulnerability could take 
complete control of an affected system. An attacker could then install 
programs; view, change, or delete data; or create new accounts with full user 
rights. Users whose accounts are configured to have fewer user rights on the 
system could be less impacted than users who operate with administrative user 
rights.

This security update is rated Critical for all supported editions of 
Microsoft Windows 2000, Windows XP, Windows Server 2003 (except Itanium-based 
editions), and Windows Server 2008 (except Itanium-based editions). For all 
supported editions of Windows Vista, this security update is rated Important. 
Itanium-based editions of Windows Server 2003 and Windows Server 2008, and 
all supported editions of Windows 7 and Windows Server 2008 R2, are not 
affected by the vulnerability. For more information, see the subsection, 
Affected and Non-Affected Software, in this section.

The security update addresses the vulnerability by correcting the way that 
the Microsoft MPEG Layer-3 audio codecs decode the MPEG Layer-3 audio stream 
in specially crafted AVI files. For more information about the vulnerability, 
see the Frequently Asked Questions (FAQ) subsection for the specific 
vulnerability entry under the next section, Vulnerability Information.



-- 
thanks for your help


"Peter Foldes" wrote:

> Then you have the same issue and the same answer from me.
> 
> Microsoft lost the case which was brought against them by Sun Microsystems for using 
> their technology. The agreement was that MS will discontinue Support (which was done 
> at a very early stage ) and stop all aspects of Windows 2000 including updates. This 
> was completed at some point last year by MS. In essence Windows 2000 in all flavors 
> is dead as far as updating among others
> 
> -- 
> Peter
> 
> Please Reply to Newsgroup for the benefit of others
> Requests for assistance by email can not and will not be acknowledged.
> http://www.microsoft.com/protect
> 
> "John" <a> wrote in message news:%23aFxPRq9KHA.5592@TK2MSFTNGP02.phx.gbl...
> >
> > "Peter Foldes" <maci252211@hotmail.com> wrote in message 
> > news:uM7kv0j9KHA.508@TK2MSFTNGP06.phx.gbl...
> >> You can see this yourself if you try and download that file manually. It will not 
> >> download.
> >
> > I just downloaded it from here:
> > http://www.microsoft.com/downloads/details.aspx?familyid=F6394FC2-B9D0-46CF-9265-A0D4AEB1448F&displaylang=en
> >
> > Apparently the update is still available. I'm having the same problem as OP but 
> > mine is a Win2000 Pro machine.
> >
> >> Windows 2000 and all updates for it in essence is dead. Microsoft pulled it from 
> >> their sites according to the agreement between Sun and the DOJ
> >
> > What agreement?
> > 
> 
> .
> 
0
Utf
5/18/2010 7:00:01 PM
Try this:
Search for L3codeca.acm file in C:\WINNT folder. There should be one 
L3codeca.acm file in the following location:

C:\WINNT\SoftwareDistribution\Download\<maybe some random numbers>\wm9

Copy the L3codeca.acm file to C:\WINNT\System32 folder. File size is about 
301KB, with a date stamp of 1/21/2010.

I just did the above. Now Windows 2000 Pro stops telling me there's a new 
update (KB977816) to install. I'm going to wait for several days to be sure 
that this crap doesn't come back as needed.


"azntch" <azntch@discussions.microsoft.com> wrote in message 
news:88D423C2-E1D2-45E3-8041-926CF9363633@microsoft.com...
> That doesn't seem to make sense as this kb977816 is listed as a security
> update by Microsoft yet see:
> http://www.microsoft.com/technet/security/Bulletin/MS10-026.mspx. It says 
> its
> related to codecs:
> This security update resolves a privately reported vulnerability in
> Microsoft MPEG Layer-3 audio codecs. The vulnerability could allow remote
> code execution if a user opened a specially crafted AVI file containing an
> MPEG Layer-3 audio stream. If a user is logged on with administrative user
> rights, an attacker who successfully exploited this vulnerability could 
> take
> complete control of an affected system. An attacker could then install
> programs; view, change, or delete data; or create new accounts with full 
> user
> rights. Users whose accounts are configured to have fewer user rights on 
> the
> system could be less impacted than users who operate with administrative 
> user
> rights.
>
> This security update is rated Critical for all supported editions of
> Microsoft Windows 2000, Windows XP, Windows Server 2003 (except 
> Itanium-based
> editions), and Windows Server 2008 (except Itanium-based editions). For 
> all
> supported editions of Windows Vista, this security update is rated 
> Important.
> Itanium-based editions of Windows Server 2003 and Windows Server 2008, and
> all supported editions of Windows 7 and Windows Server 2008 R2, are not
> affected by the vulnerability. For more information, see the subsection,
> Affected and Non-Affected Software, in this section.
>
> The security update addresses the vulnerability by correcting the way that
> the Microsoft MPEG Layer-3 audio codecs decode the MPEG Layer-3 audio 
> stream
> in specially crafted AVI files. For more information about the 
> vulnerability,
> see the Frequently Asked Questions (FAQ) subsection for the specific
> vulnerability entry under the next section, Vulnerability Information.
>
>
>
> -- 
> thanks for your help
>
>
> "Peter Foldes" wrote:
>
>> Then you have the same issue and the same answer from me.
>>
>> Microsoft lost the case which was brought against them by Sun 
>> Microsystems for using
>> their technology. The agreement was that MS will discontinue Support 
>> (which was done
>> at a very early stage ) and stop all aspects of Windows 2000 including 
>> updates. This
>> was completed at some point last year by MS. In essence Windows 2000 in 
>> all flavors
>> is dead as far as updating among others
>>
>> -- 
>> Peter
>>
>> Please Reply to Newsgroup for the benefit of others
>> Requests for assistance by email can not and will not be acknowledged.
>> http://www.microsoft.com/protect
>>
>> "John" <a> wrote in message 
>> news:%23aFxPRq9KHA.5592@TK2MSFTNGP02.phx.gbl...
>> >
>> > "Peter Foldes" <maci252211@hotmail.com> wrote in message
>> > news:uM7kv0j9KHA.508@TK2MSFTNGP06.phx.gbl...
>> >> You can see this yourself if you try and download that file manually. 
>> >> It will not
>> >> download.
>> >
>> > I just downloaded it from here:
>> > http://www.microsoft.com/downloads/details.aspx?familyid=F6394FC2-B9D0-46CF-9265-A0D4AEB1448F&displaylang=en
>> >
>> > Apparently the update is still available. I'm having the same problem 
>> > as OP but
>> > mine is a Win2000 Pro machine.
>> >
>> >> Windows 2000 and all updates for it in essence is dead. Microsoft 
>> >> pulled it from
>> >> their sites according to the agreement between Sun and the DOJ
>> >
>> > What agreement?
>> >
>>
>> .
>> 


0
John
5/18/2010 9:04:35 PM

"azentech2" <azentech2@discussions.microsoft.com> wrote in message 
news:186E9874-EF9D-4DAE-BD85-E306812B328A@microsoft.com...

> KB977816 fails to apply to 2000 server. After server reboots, update
> reappears and asks to be installed. I have noted that tech support has 
> asked
> for the windowsupdate.log and the updateshandler.log in other incidents. 
> The
> windows update.log is below, however I did not find an updateshandler.log 
> (or
> anything close) on the server.

> I did find the KB977816.log and that also follows.


Did you try opening a support case for this yet?   (PA Bear's advice.)

Otherwise, I don't think there is enough information in these logs.   FWIW 
what I would do is run ProcMon  to supplement whatever diagnostics you can 
force the install to give you, e.g. add a /verbose switch (if there is one) 
and do a manual install.

http://www.microsoft.com/technet/security/bulletin/MS10-026.mspx

There is one.    Expand.
    [-]  Security Update Deployment
        [-]  Windows 2000 (all editions)
            [-]  Deployment Information

A small puzzle is why all these switches are so different from the ones 
which are documented?  ; )

> 0.062: Hotfix started with following command line: -q -z -er


http://support.microsoft.com/kb/262841

 -z  would imply  /norestart  so why were you getting a reboot?


> The following is from the windowsupdate.log :

> 2010-04-21          03:07:11:866       1156       488         AU


Clearly from the wrong end.   ; )   Hint:  if you do a manual install you 
won't need to consider this log.

Tip:   before you do the reboot check what it is going to do for you.   E.g. 
check the install log, the Event log (e.g. using Event Viewer) and the 
registry value  PendingFileRenameOperations.   Check the versions of all of 
the files implied by those diagnostics and confirm that they make sense. 
After the reboot check again using the same information to confirm that the 
update has completed.


Good luck

Robert Aldwinckle
---
 

0
Robert
5/18/2010 9:19:54 PM
On 2010-05-18 3:50 p.m., Peter Foldes wrote:

> This has been reported many times in different newsgroups. The Update or
> any Update for Windows 2000 will not install since the install file has
> been pulled.It still shows but it is an empty file .You can see this
> yourself if you try and download that file manually. It will not
> download. Windows 2000 and all updates for it in essence is dead.
> Microsoft pulled it from their sites according to the agreement between
> Sun and the DOJ

I think you're thinking of a different update.

   Harry.

-- 
Harry Johnston
http://harryjohnston.wordpress.com
0
Harry
5/19/2010 11:16:18 PM
What is odd is all the switches etc - were just from the sus client doing the 
automatic update. We didn't tell it to do anything in particular. Just to do 
the downloads and reboots at a certain time each week. 
I have opened a support case but have not received much in response yet. 
Will post when I do. The problem I run into is that these are vital servers, 
so I need to schedule the work well in advance, So probably will be trying 
something this coming week - judy not exactly sure what yet. Am hoping I will 
get a response from support - if so I will post the relevant detail here.
thank you


"Robert Aldwinckle" wrote:

> 
> 
> "azentech2" <azentech2@discussions.microsoft.com> wrote in message 
> news:186E9874-EF9D-4DAE-BD85-E306812B328A@microsoft.com...
> 
> > KB977816 fails to apply to 2000 server. After server reboots, update
> > reappears and asks to be installed. I have noted that tech support has 
> > asked
> > for the windowsupdate.log and the updateshandler.log in other incidents. 
> > The
> > windows update.log is below, however I did not find an updateshandler.log 
> > (or
> > anything close) on the server.
> 
> > I did find the KB977816.log and that also follows.
> 
> 
> Did you try opening a support case for this yet?   (PA Bear's advice.)
> 
> Otherwise, I don't think there is enough information in these logs.   FWIW 
> what I would do is run ProcMon  to supplement whatever diagnostics you can 
> force the install to give you, e.g. add a /verbose switch (if there is one) 
> and do a manual install.
> 
> http://www.microsoft.com/technet/security/bulletin/MS10-026.mspx
> 
> There is one.    Expand.
>     [-]  Security Update Deployment
>         [-]  Windows 2000 (all editions)
>             [-]  Deployment Information
> 
> A small puzzle is why all these switches are so different from the ones 
> which are documented?  ; )
> 
> > 0.062: Hotfix started with following command line: -q -z -er
> 
> 
> http://support.microsoft.com/kb/262841
> 
>  -z  would imply  /norestart  so why were you getting a reboot?
> 
> 
> > The following is from the windowsupdate.log :
> 
> > 2010-04-21          03:07:11:866       1156       488         AU
> 
> 
> Clearly from the wrong end.   ; )   Hint:  if you do a manual install you 
> won't need to consider this log.
> 
> Tip:   before you do the reboot check what it is going to do for you.   E.g. 
> check the install log, the Event log (e.g. using Event Viewer) and the 
> registry value  PendingFileRenameOperations.   Check the versions of all of 
> the files implied by those diagnostics and confirm that they make sense. 
> After the reboot check again using the same information to confirm that the 
> update has completed.
> 
> 
> Good luck
> 
> Robert Aldwinckle
> ---
>  
> 
> .
> 
0
Utf
5/21/2010 6:28:05 PM
Reply:

Similar Artilces:

Locking down relaying in Exchange 2000
Hello All, I have searched this newsgroup for recommendations for shutting down the open relay capabilities in Exchange Server 2000. I ran the relay test from a site recommended in a previous post in this group: http://msv.dk/ This test ran and the following are the failures listed from the test. Note: The Ip address, Servername, and domain name have been changed to protect the ignorant (me). Can anyone explain how each of these failures were caused, and even more importantly, how to block them, if, in fact, they are true failures? At the time of this test, the test did not check for ful...

Moving Money 2000 to new computer needs password
Hi - I received a new computer and I am moving all of me software from the old one before I get rid of it. I installed the copy of Money 2000 that I had on the old computer. When I copy my msmoney.mny file to the new computer and attemt to open it, it says I need to enter the password for the file. Problem is, I never created a password for it, so I can open the file. Any suggestions? In microsoft.public.money, Wes wrote: >Hi - > > I received a new computer and I am moving all of me software from the old >one before I get rid of it. I installed the copy of Money ...

KB977816 keeps notifying
Hi, I have a W2K server with auto update setup. The thing is that, few days ago it downloaded a bunch of updates, including KB977816 and installed all of them. It is however, according to "add/remove programs", the KB977816 has been installed, but auto update keeps notifying that the update is ready to install. When ever I let auto update installs it, it just shows update was successful, no error. But less then a minute later, the auto update notify the KB977816 is ready for install again. Tried restart many times, did not help, tried stopping auto update service an...

Calendaring agent failed with error code 0x80070005 while saving appointment #2
Is anyone familiar with this error on Exchange 2003? All the KB's I can find on it refer to Exchange 2000 and virus scanners accessing the M drive, which obviously isn't the problem on 2003. Its only affecting one user and it is manifesting in the shape of thousands of calendar invitations moving back and forth between us and a client. Any suggestions would be great at this point since I'm absoltely stumped. If its any more help I now see that all of the thousands of replies are acceptance or denials for the meeting. The strange thing is that email email is for a different...

Outlook 2000 mail with attachment
I have sent out mail with a Word attachment from Outlook to recipients who use Outlook Express. They are getting the text of the message but not the Word attachment. Has anyone seen this problem and what is the fix? Bryan ...

FindResourceEx fails.
Hello I cant the the following function to work. FindResourceEx returns NULL. TRACE prints 1814 as error. m_wLanguage is 1053, and I got swedish as a lang in my resourcefile. const char* CResourceLoader::GetString(int nId) { HRSRC hResource = FindResourceEx( NULL, RT_STRING, MAKEINTRESOURCE(nId), m_wLanguage); TRACE("%d\n", GetLastError()); if (!hResource) { char szString[512]; LoadString(NULL, nId, szString, 512); return szString; } else return (const char*)LoadResource(NULL, hResource); } Jonas > I cant the the following function to work. FindResourc...

BranchOffice Server 2008 under SBS2003
Hi Team: At HeadOffice (HO) have an SBS 2003 premium setup in 2 NIC configuration connecting to the ADSL Modem (8MB down, 1 MB up) since 2007. Have all the apps, except ISA, installed and working good. Need to set-up a Server 2008 in branch office (BO) ADSL (10MB Down, 2 MBup), 10-15 Users. Help suggestions/ thoughts/ step by step/ documentation/ recommendations/ links will be gratly appreciated. Thanks Kaloo On 9/11/2010 9:18 AM, Mohindar wrote: > Hi Team: > > At HeadOffice (HO) have an SBS 2003 premium setup in 2 NIC configuration > connecting to the A...

Quick Campaigns are failing
Quick campaigns used to work for us but don't anymore. I get the following error after creating the quick campaign: This Quick Campaign could not be performed due to an error: 0x80131500. For more information, contact your system administrator. with the "Status Reason = aborted" I've searched everywhere for this error but can't find anything. Has anyone seen this before? The only change I made to the server was to use the rule deployment wizard but I also did this on another CRM installation server and Quick Campaigns still work there. Update to this: ...

Re: connection fails daily
On 18/12/2009 23:42, fcsark9handler wrote: ????????? *What* did the poster write? -- Dave (Sometimes man stumbles over the truth ...... Sir Winston Churchill) ...

Consistency Check fails and fails and fails ...
Hello all last Tuesday, we had a Blue Screen on our Home Directories server. After having it restarted, I got a DPM error, thus needing a Consistency Check. Today, one week later, I did 30 Consistency Checks, all having failed with all kinds of errors: - DPM encountered an error while performing an operation for \\?\Volume{83986761-1bce-4d28-bf4c-25bf9d86a50f}\HomeDirectories\K... (ID 2033 Details: The system cannot find the file specified (0x80070002)) - DPM encountered an error while performing an operation for \\?\Volume{83986761-1bce-4d28-bf4c-25bf9d86a50f}\HomeDirectories\G...

Relay Access denied from newly installed Exchange 2003 servers
Hello, I recently upgraded our Exchange 2000 FE server to 2003. I have 3 Exchange 2000 BE servers and have just installed 3 new Exchange 2003 servers that I will eventually migrate the mailboxes from the Exchange 2000 servers to. I've set all of the Exchange settings just like they are on the Exchange 2000 servers. I moved a test mailbox from an Exchange 2000 server to one of the new Exchange 2003 servers and tried to send an email from it through Outlook Web Access to a gmail account. The error I received is " There was a SMTP communication problem with the recipi...

'Define Views...' option not available in Advanced Find screen in Outlook 2000
The 'Define Views...' option in the View menu not available in Advanced Find screen in Outlook 2000. We are looking for a way to set a default view in the advanced find screen or a way to edit the messages view to make it include the To field. We have users that want to see the TO field without having to click View and then the 'Send To' view. I have tried customizing the view but each time I exit it resets the view. I have also modified my 'Messages' view but it was done at the main screen and doesn't seem to phase the one in the advanced find. I also tri...

Turn off Name Cache in Outlook 2000
I need to turn off this feature. Everytime I convert a distribution list to a resource mailbox, remote users will get NDRs sending the that address until they pull it from their GAL. For each client you will need to uncheck "Suggest names while complete To, CC, and Bcc fields". Which is located by going to Tools, Options, Email Options, Advanced Email Options. <anonymous@discussions.microsoft.com> wrote in message news:35b001c47ee0$587e9000$a501280a@phx.gbl... > I need to turn off this feature. Everytime I convert a > distribution list to a resource mailbox, remote ...

Moving CRM and Reporting Services Backend to another Server
We are running SQL Server 2000 Standard Edition sp3a on a WIN2003 Server with CRM and Reporting Services installed all on the same box. I now need to move the CRM and Report Server SQL Server Backends to another Database Server (We want a Two Server deployment Model) What I have done so far is backup the two CRM Databases and the two Reporting Services Databases (and all associated User IDs) on the the Server containing the CRM and Reporting Services APPS AND the SQL Server Backend and Restored them to a new SQL Server Backend Server. After doing this we successfully pointed the C...

KB977816 fails to apply to 2000 server
KB977816 fails to apply to 2000 server. After server reboots, update reappears and asks to be installed. I have noted that tech support has asked for the windowsupdate.log and the updateshandler.log in other incidents. The windows update.log is below, however I did not find an updateshandler.log (or anything close) on the server. I did find the KB977816.log and that also follows. The following errors are in the system log: ______________________________________ 4/26 16:01 Event Type: Error Event Source: Windows Update Agent Event Category: ...

Calendaring agent failed with error code 0x80070005 while saving appointment
Hello, Today I just saw this error message (see below). We are running Exchange Server 2003. Event Type: Error Event Source: EXCDO Event Category: General Event ID: 8206 Date: 1/6/2005 Time: 12:34:04 PM User: N/A Computer: EXCHANGE Description: Calendaring agent failed with error code 0x80070005 while saving appointment. For more information, click http://www.microsoft.com/contentredirect.asp. Data: 0000: 48 72 53 61 76 69 6e 67 HrSaving 0008: 41 70 70 74 3a 3a 48 72 Appt::Hr 0010: 43 68 65 63 6b 50 61 74 CheckPat 0018: 74 65 72 6e 20 66 61 69 tern fai 0020: 6c 65 64 2e 20 50 75...

Why is collection failing?
I'm creating a wrapper class for a collection object, mainly so I can test whether a given records exists. I'm baffled as to why I'm getting "Invalid procedure or argument" in the exists function when I try to extract the value, whether it actually exists or not. I've tried collection.item and collection(item), same result. BTW, the values are numbers that I convert to strings. Option Compare Database Option Explicit 'this class object extends the collection object to include an 'exists' boolean function Private colStatus As VBA.Collection Private S...

Excel 2000 Track Changes Question.
Alright, a co-worker and I have been working on a spredsheet where we have been tracking the changes. Well, we used three different laptops and desktops to work on it. We didn't notice till recently that the colors changed whenever we used a different comp. Is there anyway to change those border colors because one of them is this really light blue that you can hardly see. Thanks everyone. -- kahanad ------------------------------------------------------------------------ kahanad's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=29448 View this thread: http:/...

when reply getting old exchange server 5.5 GAL addresses
We upgraded to Exchange 2003 Server in a new domain from Exchange 5.5 on an NT 4 domain. We exported the user's emails to a pst file and imported them into their new account on the exchange 2003 server. Now users get undeliverable messages when replying to email sent before the upgrade. The problem doesn't occur when users manually select the same addresses from the Global Address List. It looks like the clients are pulling old Exchange Server 5.5 addresses. How can I update our Exchange clients to use the new addresses in the new GAL? I do not want to make my users manually remo...

CreateDirectoryW fails
Hi I want to create a directory with more then 300 characters. I am using the CreateDirectoryW function and prepending \\?\ to the path for eg.. CreateDirectoryW("\\\\?\\C:\\Temp\\..." some long name but the function fails with error 123. What could be the problem. I am working on Windows 2000. Regards Jakir Would it hurt to tell us what error 123 means? (I looked it up and it says the fllename syntax is illegal). Give your code snippet below, I'm not surprised. Take a look at CreateDirectoryW. What is its argument type? A Unicode string. So you should supply a Unic...

Can you apply a swatch to grayscale TIF? (Like InDesign does?)
InDesign has a way to drag a color swatch over a non transparent grayscale TIF and colorize the black areas. Does Publisher 2003 have any ways of doing that also? and how? Greg <Greg@discussions.microsoft.com> was very recently heard to utter: > InDesign has a way to drag a color swatch over a non transparent > grayscale TIF and colorize the black areas. Does Publisher 2003 have > any ways of doing that also? and how? See Mary's response to your post of 24 minutes before this one. -- Ed Bennett - MVP Microsoft Publisher ...

CRM 3.0 Server Error in '/' Application when accessing Reports via
Hi, I've got a server running Sharepoint 2003 and CRM 3.0, both using SQL 2000 Server, which is a separate server. All Windows Server 2003. The default website on the CRM site has always been stopped and the CRM site has a host header, the CRMReports folder is inside the CRM website. No SSL enabled on the CRM site. All has been running fine until the last couple of days, now when we go to http://crm and click on 'Reports' in the CRM app via IE, we get the following error: Microsoft CRM Unhandled Error Details: Server Error in '/' Application. --------------------...

Users failing to log in to Exchange on some PCs but not others.
Last week a number of laptop users reported that whenever they run Outlook 2002 to access exchange they are being prompted with a login dialogue. As they are already authorised network users this should not be happening. I took the most important users laptop and checked the settings to find everything was OK. I started a test profile and tried to set up the user there. Same problem. I went to another PC and set up a new profile and accessed exchange immediately. Back at the laptop, I reinstalled the Outlook Suite, The Network components and anything else I could think may be at fault, but sti...

OL 2003 and Exchange 5.5
I'm setting up a new workstation w/ Office 2003 and having problems connecting to our exchange server (5.5) When setting up the account in OL, it changes to name of the server to our external SMTP address name 'mail.mullenlaw.com' - then it doesn't work. When trying to connect, I control right-clicked the OL icon to check the connection status and it indicated the server as a Directory (not mail). Eventually (I walked away from it), it connected to our exchange server, but it keeps losing the connection. In the connection status window it even changed the server to our intern...

Runtime error when trying to save Excel 2000 worksheet from VB app
I have a VB 6.0 application that creates reports using Excel 2000. The application has been working fine but recently I installed it on a new hard drive (same configuration) and now I get a run time error every time I try to save the excel report. The error is: Runtime error '1004'. "Unable to set the CenterHeader Property of the Page Setup class." Can anyone help me troubleshoot this problem?! ...