Am Not Received Updates........Error 80072F8F

getting error message - 800728F8 - have not received updates since repair
0
Utf
11/15/2009 5:22:01 PM
windowsupdate 1336 articles. 0 followers. Follow

2 Replies
1762 Views

Similar Articles

[PageSpeed] 22

Orlando wrote:
> getting error message - 800728F8 - have not received updates since
> repair

*Assuming* Windows XP - 32-bit - with SP2 or later...

 Start button --> RUN
 (no "RUN"?  Press the "Windows Key" + R on your keyboard)
 --> type in:
   winver
 --> Click OK.

The picture at the top of the window that opens will give you the general
(Operating System name) while the line starting with the word "version" will
give you the rest of the story.  Post _both_ in response to this message
verbatim.  ;-)

Download/install this:
http://support.microsoft.com/kb/290301

After installing, do the following:

Start button --> RUN --> type in:
  "%ProgramFiles%\Windows Installer Clean Up\msizap.exe" g!
--> Click OK.
(The quotation marks and percentage signs and spacing should be exact.)

Reboot.

Download, install, run, update and perform a full scan (separately) with the
following two applications (freeware versions are the ones to use for this):

SuperAntiSpyware
http://www.superantispyware.com/

MalwareBytes
http://www.malwarebytes.com/

After performing a full scan with one and then the other and removing
whatever they both find completely, you may uninstall these products,
if you wish.

Download and run the MSRT manually:
http://www.microsoft.com/security/malwareremove/default.mspx

Reboot.

Download/Install the latest Windows Installer (for your OS):
( Windows XP 32-bit : WindowsXP-KB942288-v3-x86.exe )
http://www.microsoft.com/downloadS/details.aspx?familyid=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

Reboot.

and...

Download the latest version of the Windows Update agent from here (x86):
http://go.microsoft.com/fwlink/?LinkID=91237
.... and save it to the root of your C:\ drive.  After saving it to the root
of the C:\ drive, do the following:

Close all Internet Explorer windows and other applications.

Start button --> RUN and type in:
   %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
--> Click OK.

(If asked, select "Run.) --> Click on NEXT --> Select "I agree" and click on
NEXT --> When it finishes installing, click on "Finish"...

Reboot.

Then follow the instructions here:

How do I reset Windows Update components?
http://support.microsoft.com/kb/971058

Reboot.

CHKDSK
 How to scan your disks for errors
 http://support.microsoft.com/kb/315265
 * will take time and a reboot

Defragment
 How to Defragment your hard drives
 http://support.microsoft.com/kb/314848
 * will take time

Reboot.

Log on as an user with administrative rights and open Internet Explorer
and visit http://windowsupdate.microsoft.com/ and select to do a
CUSTOM scan...

Every time you are about to click on something while at these web pages -
first press and hold down the CTRL key while you click on it.  You can
release the CTRL key after clicking each time.

Once the scan is done, select just _ONE_ of the high priority updates
(deselect any others) and install it.

Reboot again.

If it did work - try the web page again - selecting no more than 3-5 at a
time.  Rebooting as needed.

The Optional Software updates are generally safe - although I recommend
against the "Windows Search" one and any of the "Office Live" ones or
"Windows Live" ones for now.  I would completely avoid the
Optional Hardware updates.  Also - I do not see any urgent need to install
Internet Explorer 8 at this time.

Seriously - do all that.  This is like antibiotics - don't skip a single
step, don't quit because you think things will be okay now - go through
until the end, until you have done everything given in the order given.  If
you have a problem with a step come ask and let someone here get you
through that step.  If you don't understand how to do a step, come back and
ask here about that step and let someone walk you through it.

Then - when done - let everyone here know if it worked for you - or if you
have more issues.

-- 
Shenan Stanley
     MS-MVP
-- 
How To Ask Questions The Smart Way
http://www.catb.org/~esr/faqs/smart-questions.html 


0
Shenan
11/15/2009 5:26:44 PM
since repair of what?

Orlando wrote:
> getting error message - 800728F8 - have not received updates since repair
0
PA
11/16/2009 1:56:05 AM
Reply:

Similar Artilces:

Payroll Tax Updates Includes All Patches...Why??
We recently upgraded from GP7.5 to GP9.0 including Canadian Payroll. One thing we have noticed now is that with GP9.0, the payroll tax updates include all previous hotfixes, even if they have nothing to do with payroll. This is problematic for us because we have a large GP environment including several customizations, and we need to do extensive testing anytime we release an update to GP. In GP7.5, the tax updates only affected the users with Canadian Payroll, but now all of our clients must be updated since the version numbers change for all of the modules that are patched with the t...

Custom Error Message 06-27-07
I have a table that holds information about construction sites. Three of the fields (account number, lot number and street address) are a mulitiple field primary key. I have a form that is used to enter the information into this table. If the combination of the account number, lot number and street address have all ready been used, it will not accept this entry (which is what I want). But I get an standard Access error message. How can I give an error message box that will really tell the user what is wrong and how to correct the entry? Phil Trap the Access error message in the On_Error...

I m receiving my email but after received it is not in my inbox
When I open the outlook and click on send/receive, I receive all the emails, but I could not find the downloaded email anywhere. It's not in my inbox or any of the folders that I have created. The unread mail also does not change to reflect that new emails have arrived. Could some one help me out here. Thanking you in advance. If you check your whole folder tree (composed of multiple PSTs possibly), are any folders showing as bold? "INAVAB" <INAVAB@discussions.microsoft.com> wrote in message news:7708D9D4-47D5-44FD-9983-89F13F35BCEA@microsoft.com... > When I open...

Pictures Received Are Garbled
Hi, I have been receiving emails with pictures from certain people, but the pictures are shown as text. As if I had opened a jpeg with a text editor. Not all pictures come in this way, only in emails from certain people. How do I (or they) make it stop? Marebear wrote: > Hi, > > I have been receiving emails with pictures from certain people, but the > pictures are shown as text. As if I had opened a jpeg with a text editor. > Not all pictures come in this way, only in emails from certain people. > > How do I (or they) make it stop? Anti-...

Problem with serial receive
I have a receive thread for a serial com port. I'm calling WaitCommEvent with an overlapped structure to get events. The event mask is EV_BREAK | EV_RXCHAR | EV_ERR. I also have an overlapped read operation to get receive input. Both events are setup with auto-reset. The port works fine until I get an error. When an error occurs on the receive line the read event is signaled and the call to GetOverlappedResult returns 995 Operation Aborted (the thread has not exited). I then get a WaitCommEvent signal. I call ClearCommError() which returns a CE_RXPARITY error. I thought ClearComm...

Cant send or receive emails
I've done something to my settings, and cannot send or receive emails. Can anyone tell me what to do? And I'm not a newby either, shame shame! thanks. Kari Error message? Version of Outlook? Type of mail account? Checked your mail account settings already? -- Robert Sparnaaij [MVP-Outlook] www.howto-outlook.com Tips of the month: -What do the Outlook Icons Mean? -Create an Office 2003 CD slipstreamed with Service Pack 1 ----- "Kari Jacob" <jacob52@optusnet.com.au> wrote in message news:549201c49180$ec8cfa40$a501280a@phx.gbl... > I've done something to my...

PM_Key_MSTR Table Error
I am trying to post my batches in Cash Book Management. But I get the error " Value exists in the PM_Key_MSTR table" I went to check the table, PM00400 but did not find the the check numbers am trying to post there and neither are there duplicate values/records found. Please what is wrong? -- pibsng Its the first two fields that must be unique, the CNTRLNUM and CNTRLTYP combined. Run a checklinks and reconcile on this table. -- Richard L. Whaley Author / Consultant / MVP 2006-2008 Documentation for Software Users Get our Free Tips and Tricks Newsletter and check out our b...

Receive email in real-time
We have several PCs in our company that are receiving Exchange email messages in real-time, whereas others have to click Send/Receive within MS Outlook to receive their email. How do I setup Exchange where all users can receive their email instantaneously on any machine in the organization onto which they logon. Thanks in advance, Mervin Williams Hi, You can't configure Exchange to not deliver emails instantly to Outlook users. This is an Outlook setting and will have to be configured here. Leif "Mervin Williams" <mwilliams@innovasolutions.net> skrev i en meddelel...

Send & Receive button doesn't work
I installed Office XP and the SP3 service pack. I can't get the "send and recieve" button to work in MS Outlook. Everytime I click it I get a error message "The operation failed. An object could not be found." I tried proposed resolution in from MS knowledge base article 312354 but it didn't fix the problem. Any suggestions on the fix? i'd follow the procedure for creating a new profile again first. if that fails, try a repair operation. "Tom" <anonymous@discussions.microsoft.com> wrote in message news:0b0d01c425ad$17305570$a401280a@...

Resoure Calender error
I was wondering if someone can help me with this error. When some users try to book a conference room as a resource, they get the following error: "The operation failed. An object could not be found. Unable to directly book a resource for this meeting" What I have figure so far is its an issue with users from one private store booking the resourece that resides in another private store. Both stores are on the same sever, or on an exchange 2k3 cluster. For example, if conference room 1 is on priv store 1, all users on priv store 1 can make reservation with out a problem....

Received Not Invoiced not = GL(205000-000-000 Received Not Invoic
I am working on some questions for an audit, and was asked why when we run an RNI report [Reports>Purchasing>Analysis>Received/Not Invoiced] for a specific date range, it doesn't match the [Summary Inquiry] numbers. Shouldn't you be able to run a report that selects the RNI from the POP tables for a specified date range and the GL20000 (acct code 20500-000-000) for the same date range and come up with the same result. I figured out the answer, never mind! "Rich" wrote: > I am working on some questions for an audit, and was asked why when we run an > RN...

New update to IBF: Anyone work with it yet?
http://www.crn.com/showArticle.jhtml?articleID=57700649&flatPage=true IBF 1.5 coming soon to an MSDN near you. I don't know if it's already beta'ed but has anyone tried to make the new ver work better with CRM than 1.0 does? Dave ...

Publisher Updates
I have recently requested help from you. I am urgently seeking your assistance. I apologize if seem impatient but I am doubtful if I am going to complete the task of downloading ONLY the most recent versions of PUBLISHER on my new DELL Laptop. I recently created a brochure for my mortgage business that I opperate from home mostly. I used Publisher 97 version to create it at Xavier University of New Orleans. I followed some of your instructions on HOW-TO download software, but it did not say how much software is needed to operate the system or run the program from my laptop. I must ...

Send/Receive Operation Failed
Hey Folks, Symptom: I was receiving an "Operation Failed" message when pressing the Send/Receive button. Background: I tried the trial of Office 2003, reverted back to Office XP. After re-install of Office XP, Outlook resumed all previous settings, however the Send/Receive function was inoperative. Fix: After some searching and experimenting, the solution was found in Microsoft Knowledge Base Article - 284312. After shutting Outlook down, finding the Outlook file with the extension *.srs, renaming it to *.old, and restarting Outlook, the Send/Receive function resumed n...

Office stopped working after the auto-update a few months ago
Version: 2008 Operating System: Mac OS X 10.6 (Snow Leopard) Processor: Intel Microsoft Office stopped working after it ran an auto-update a few months ago. Now, when I open any of the Office apps, I get an error message like this: &quot;Check with the developer to make sure Microsoft Word works with this version of Mac OS X. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OS X.&quot; <br><br>There are no available updates for Mac OS X or Office that I am aware of�when I run the Software Update it doesn&#...

email stuck in outbox: receiving error message
My emails are stuck in my outbox. They do send to the recepient, but never switch over to my sent box. Go to the 'Tools' menu, then options. In the first / 'Preferences' window that appears (tab shown at the top) click on 'E-mail Options'. Make sure there's a check mark in the box that says 'Save copies of messages in Sent Items folder'. If this is already done, you might want to note the exact text of the error message and do a search in the Microsoft Knowledge Base. >-----Original Message----- >My emails are stuck in my outbox. They do s...

what does error (0x80070057) mean?
I recently upgraded to Outlook 2003 and cannot send to a group list. I am getting the following error message: sending 'reported error (0x80070057) could not complete the operation. One or more parameter values are not valid' ...

Forwarding mail received from a receive-only account to a send/receive account
I am trying to setup Outlook 2002 (SP3) to pop mail from one of my accounts. This account (Account1)is receive-only, that is in the Send/Receive group settings I have setup the account to "Receive mail items" but not to "Send mail items". I have existing rules that forward mail that I get from certain people, and I have another account (Account2) which I have setup to send and receive. However, when I receive mail from Account1 that matches the rules, the mail gets forwarded(sent) using Account1 even though the Send/Receive group settings say the account is receive-only. ...

WMP 11 error C00D1163 (after update KB971513)
Windows Media Player 11 will not play DVDs. I always get error C00D1163 "Windows Media Player cannot play this DVD because there is a problem with digital copy protection between your DVD drive, decoder, and video card. Try installing an updated driver for your video card." DVDs I have owned for years are now impossible to play (so are rentals). I am having the same problem as others in this forum, although my system configuration is different -- which indicates this is a widespread problem. It is an interesting coincidence that my problem started immediately ...

Sending and receiving
I can receive e-mail but cannot send. I've checked my settings - they are the same as Outlook, which I used on my old XP computer. This is a new Win 7 computer. Copy and paste the entire error message for analysis please . ... . "Railroad Henry (not John)" <RailroadHenrynotJohn@discussions.microsoft.com> wrote in message news:120A3A4D-6860-46AC-A94E-C7CB0AB7AD34@microsoft.com... > I can receive e-mail but cannot send. I've checked my settings - they are > the > same as Outlook, which I used on my old XP computer. This is a new Win 7 > compu...

Hiding Received Items on Purchase Orders
Is there a way to hide already received items on a PO? That is, can a revised PO be printed that only shows remaining open items (backorders). On that same note, is there a way to print out a "Receiver" or "Check-in Sheet" for my staff to check in orders against, as opposed to the actual purchase order, which shows more information than I'd like shown... Thanks for any input!! ...

Preventing changes to received messages
Outlook allows me to modify a received message's body and subject field. So if Bob sends me an email, I can open it, change the body's content, save it, and it looks like that's how I received it. Then if I print or forward it, it looks like Bob sent me something he in reality didn't. Is there a way to disable that? Can the integrity of a received message be protected? Can this be done without digital signitures? Hi, I do not think that is possible !!! Sorry for that . Hope this helps !!! With Regards, Sudharson.AN "Hall" <hall@garp.org> wrote in mes...

Send/Receive failure
Hey all - I work for a school district that is running Outlook 2000 SR-1 and an old version of Outlook Express. Every time a user clicks on send/receive it times out and says that server such and such can't be found.... But if we close down that "error" box and click on send/receive again it works. Every time! Anyone have an idea why it "dies" on the 1st attempt and then is successful on the 2nd? I can't see any setting in either version that would make this happen. Thanks. Jim D. ...

Include this account when receiving mail or synchronizing
Hello, In OE I have the option to check mark "Include this account when receiving mail or synchronizing". Where does OL has this option? Thanks, AJS Tools-> Options-> tab Mail Setup-> button Send/Receive...-> button Edit... -- Robert Sparnaaij [MVP-Outlook] Coauthor, Configuring Microsoft Outlook 2003 http://www.howto-outlook.com/ Outlook FAQ, HowTo, Downloads, Add-Ins and more http://www.msoutlook.info/ Real World Questions, Real World Answers ----- "AJS" <newsgroup@sorga.com> wrote in message news:#0XRNuWrJHA.3992@TK2MSFTNGP04.phx.gbl... > ...

Run Time Error '6'
Hi, When I try to 'issue' a Transfer Inventory Out, or even edit the docket, I get the following: Run-Time Error '6': Overflow. When I press OK, SO Manager closes. This is on version 1.2.0185 trcboy, Are you using a really long transfer number? When you create a transfer manually and not enter a TO# does it have the same problem? -- * "trcboy" <trcboy@discussions.microsoft.com> wrote in message news:A927101C-04EC-4AA6-9714-CB9977C6F07C@microsoft.com... Hi, When I try to 'issue' a Transfer Inventory Out, or even edit the docket, I get the foll...