SMTP connector with outbound security enabled, enables authentication for all other connectors!!?!
*I have so far tested this on two Exchange Orgs. One being our live platform
and the other our test enviroment. Both are running Active Directory native
mode for 2003, with Exchange 2003 and Exchange SP1*.
Right this is my scenario:
I have two SMTP connectors, one is the default 'Internet' with a cost of 1
and address space of *. The other is called 'Admin users' has the a cost of
20 with the address space of * also. Our Front end exchange servers; let's
call them: 'EXFE1 and EXFE2' are the local bridgeheads for both connectors.
The Internet connector by de...Enable automatic query refresh for all workbooks?
I know there's a way (according to a KB article on Office 2000 SR1), and in
Office XP I must have turned this off somehow, since my workbook didn't ask
me everytime if it should refresh or not, but I can't seem to find where
this checkbox is in Office 2003!
This checkbox has been removed in XL2003 for security reasons. You cannot
off the prompt using the XL interface. Modifying the following registry key
will give you the same effect:
0 = Prompt on all workbooks
1 = Do Not Prom...IE6
I inadvertently checked the "Do not show me this message again" box,
but, as I like to know when I am being re-directed to or from a secure
site, I would like to re-enable it. Is is possible, please?
> I inadvertently checked the "Do not show me this message again" box,
> but, as I like to know when I am being re-directed to or from a secure
> site, I would like to re-enable it. Is is possible, please?
Have you looked at the settings for the security zone (probably the Internet
security zone) under which the unidentified web...Enabling Circular Logging
Hi all. I am performing backups of my exchange DB's over the internet
starting today. The company I am doing this with suggested enabling circular
logging on the Exchange server to avoid backing up unnesseccary data and to
svae over the wire bamdwidth. Can anyone explain to me what it is, and how
to enble it? I have Exchange 2003 standard server with SP1. Thanks!!!!
On Fri, 23 Dec 2005 08:51:01 -0800, "redrobit"
>Hi all. I am performing backups of my exchange DB's over the internet
>starting today. The compa...Enable macros
I've got a fairly compex workbook with lots of named
ranges. I've been using and updating this WB for over a
year. All of a sudden, I now get the following message
every time I enter something in any field:
"The macros in this project are disabled. Please refer to
the online help or documentation of the host application
to determine how to enable macros."
I don't have any macros in this workbook.
...Determining if hibernation is enabled
I'm using SetSuspendState(TRUE, FALSE, FALSE) to put the pc in into
hibernation, which only works if hibernation is enabled.
How can I determine whether hibernation is enabled before calling, so I can
report as much to my users?
I'm working with VS2008, targetting XP and Vista.
IsPwrHibernateAllowed\ GetPwrCapabilities or
CallNtPowerInformation(Maybe it's better way)
"Steph" <firstname.lastname@example.org> д����Ϣ
> I'm using SetSuspendState(TRUE, FALSE, FALSE) to put...Enable/disable EDIT Menu's PASTE item according to clipboarb's format
Env: Windows2000, VC++6.00, MFC, .
I have a CView based application, which deals with BITMAP. Since application
can receive pasting operation coming from clipboard only for BITMAP format,
so I hope that ID_EDIT_PASTE item on "Edit" Menu and ID_EDIT_PASTE button
on toolbar can be enabled/disabled automatically according to the current
I know I can do that if I put IsClipboardFormatAvailable(CF_BITMAP) into
ON_UPDATE_COMMAND_UI(ID_EDIT_PASTE, OnUpdateEditPaste) as follows,
void CMainFrame::OnUpdateEditPaste(CCmdUI* pCmdUI)
pCmdUI->Enable( IsClipboardFormatAva...set enable & disable of button (VC 6.0)
For VC 6.0 (MFC) :
How can I set the enable/disable state of that button ?
this is not going to work buddy ....... read a book .....
"Eitan M" <no_spam_please@nospam_please.com> wrote in message
> For VC 6.0 (MFC) :
> How can I set the enable/disable state of that button ?
> Thanks :)
//To Enable button...at run time ...IDB_MYBUTTON is ID of your
//To Disab...RE-Enabled Acconts
OK, I have read dozens of messages about users not being able to access
their accounts if they were dis-abled then re-enabled. Nothing definitive
for an answer though.. Some have said WAIT.. My question is how long to
wait? I do know that if I re-boot the exchange server they get their access
back, so I am thinking it is a wait thing, but in one instance I had waited
1 hour... What is happening?
it can actually take up to 2 hours for the re-enabling to take effect...
Susan Conkey [MVP]
"Carl Hilton" <email@example.com> wrote in message
news:uib71bezGHA....Can you Mail-Enable/Disable Users by OU?
I was wondering if there was a way to mail-enable/disable users by OU or
group in Exchange 2000? I have one 2000 domain with 800 or so users, but I
only want 100 of them to have mailboxes. I know when you install Exchange
it asks you which users you want to mail-enable. But I was wondering if
there was a way to maintain this after the fact, say by saying everyone in a
particular OU has a mailbox. Also, are there any security measure that I
should take with regards to securing the Exchange server to the ~700 users
who don't have mailboxes and should have any access to the Exchange serve...Enable Override price
It is possible to enable the Override pricing function on the Order form. We
have noticed that the pricing of the order is greyed out if the order is
associated with a quote. It is possible to enable this functionality through
the use of Jscript using the OnLoad event.
You can't change the order form. But you can use Write-In products for
quote and order. then you can change the price of the product to
reflect the price chage for an order.
On Sep 19, 9:58 am, Mark Braithwaite
<MarkBraithwa...@discussions.microsof...How to enable debug?
I'd be interested in enabling debug for RAS/PPP module.
This is the very first time I try to enable debug messages, hence I am quite
sure I am missing something :(
What I have done:
- run a build in DEBUG mode (from configuratiin manager)
- my build has Target Control Support module (this shall enable abilita
-the following build options are enables: Enable Kernel Debugger e Enable KITL
On COM1 (my debug port) I keep on seing exacly the same messages I see also
in Retail mode.
I have been reading around and it l...Vertical tab control with owner draw enabled
I have a tab control with owner draw enabled in which I am drawing a icon
and a text. It works perfectly fine when the TCS_VERTICAL option is not
selected. But when I select TCS_VERTICAL option I am not able to see the
text. Could anyone knows a solution for this?
...Convert Mail Enabled to MailBox Enabled
Does anyone know how to programically convert a mail enabled user to a
mailbox enabled user?
Any help would be appreciated
Have you tried using the CDOEXM CreateMailbox method as per this article:
MVP - Exchange
"Protecting the world from PSTs and brick backups!"
"Bob Smith" <BobSmith@discussions.microsoft.com> wrote in message
> Does anyone know how to programically convert a mail enabled user to a
> mailbox enabled user?
> Any help woul...Cannot connect to FileShares after enabling Win Firewall on SBS200
A user has been on to his SBS2003 as administrator and turned on the Windows
Firewall which also enables Internet Connection Sharing (ICS).
Now they cannot access mapped drives or browse the SBS network (but they can
login and authenticate OK) even though Windows firewall is now turned off on
the SBS server.
Any ideas on what's gone wrong here and how to fix it?
Run the Internet Connection Wizard....that should fix it.
> A user has been on to his SBS2003 as administrator and turned on the Windows
...Can't re-enable microphoine array
I run run Vista Home Premium SP2 on a Dell XPS M1730 with built in
microphones(2). I inadvertently disabled the Sigmatel Hi Def Audio
I expected the microphone array would appear with a CONFIGURE option to
enable it...but it no longer appears under RECORDING and I can't figure out
how to get it back. Any suggestions?
Wrote a couple of macros to move some emails around in outlook 2003, these
worked fine for a couple of days, now it reports macros are disabled - tried
reinstalling vba in shared applications no different. Help says look in
tools-options-security for macros,no sign of anything there (at all) what
can I do to get macros working again??
Help, About... disabled items - see if the VBA addin is disabled.
Diane Poremsky [MVP - Outlook]
Author, Teach Yourself Outlook 2003 in 24 Hours
Coauthor, OneNote 2003 for Windows (Visual QuickStart Guide)
Author, Google and Other Search Engine...Mail Enabled AD objects
I am currently working in a test lab with Exchange 2003 installed on the
same computer with Windows 2003 which is also a DC. I am migrating user
accounts from another Windows NT 4.0 domain. Everytime I migrate an account
to the new AD Domain it automatically creates a mail enabled object for the
user account. Is there any way to turn that off?
Are you using ADMT? I think there's an option in ADMT to create mailboxes.
Not 100% sure but doublecheck.
This posting is provided "AS IS" with no warranties, and confers no rights.
Please do not send email to this ...enabling buttons...
Thanks for all good help you guys offer!
I have a listbox form that displays a list used for multiple reasons. I.E. it
lists templates and you can select them to be modified, to view a summary,
etc. This listbox is launched from other forms.
Question: Is there a way to have multiple buttons on this list box but only
enable certain ones depending on which form launched it?
Message posted via http://www.accessmonster.com
I've never heard of having buttons on a list box, but you can certainly have
buttons on a form. Yes, these could be enabled depending on wh...RE-SEND June 18 question on "List of fonts required to be enabled for Office 2004?"
Where might I find a list of fonts that Office 2004 requires to be enabled?
I used Tiger's Font Book to disable several Asian and other font families,
but avoided disabling any that Font Book dialogues said were needed for the
Later, when I tried changing fonts within Entourage messages or Notes,
before any other fonts than the one displayed could show up, Microsoft
Report came on and it and Entourage went into spinning beachball mode. A
subsequent force-quit showed that both were "not responding."
When even a rebuild of the Entourage databa...Security Warning to enable or disable macros
On a few spreadsheet which one particular employee has
worked on are giving a Security Warning to enable or
disable macros. Yet when in the spreadsheet, it appears
that there aren't any macro nor any links. The employee
has mentioned that in certain instances, his computer
locks up when he tries to save or print preview these
particular spreadsheets. Does anyone have any insight
into this problem?
Some ideas why the security warning appears:
- (empty) code modules exist
- code within the worksheet or workbook modules
Have a look at
http://www.contextures.com/xlfaqMac.htm...Mailbox-enabled client question
Hello, We use an exchange server 2003 just for public folders of
various sorts. We do not use it for email send/receive. We use
external POP mail. Periodically some emails sent from within the
organization network to another address in our POP domain wind up in
the exchange mailbox of the recipient, not in their POP mail.
I cannot find a consistent cause for the wrong deliveries, and
sometimes I cannot figure out the reason at all. I have disabled send/
receive to the ExchangeServer in Outlook 2003 send/receive edit
settings. My question: Is there a way for mailbox-enabled clients to...Mail Enabled Public Folder
I haven't had enough coffee this morning and am doing something wrong, but
can't figure it out. I'm trying to create a mail enabled public folder. We
have a couple already that work fine. Running SBS2003.
I went in through Outlook and drilled down to the public folders, created a
new mail and post items folder name. Right clicked on it and enabled
permissions for users.
Then logged into my SBS box and brought up ESM. Drilled down to the public
folders and right clicked on the new folder, and all of the options I get are
properties and help. Aren't I...enable macros?
everytime i get into outlook, it says "some files may
contain macros", and gives me the options "enable macros"
and "disable macros".
even when there is nothing in my inbox, it still brings
up the same message. why?
You have a vbaproject.otm file that has a macro. See Tools | Macro |
Security to adjust security or Tools | Macro | Visual Basic Editor to see
what macros are on the machine.
"harami" <firstname.lastname@example.org> wrote in message
> everytime i get into outlook, it says "some ...Sweet & simply - how do I enable a macro?
running excel 2k;
All I want to know, is how do I enable a macro.
I don't care if the sheet opens & ASK's if it's OK to enable macros -
I want to know how to do MANUALLY - whatever the "yes" answer to that
question is doing?
What pulldown / button do I access to enable macros?
And PLEASE don't tell me I have to lower my security! ;-)
So - in sum - I want to manually enable macros without taking my
security off high.
I've searched help (yes, I actually try this first, I don't know why -
I almost never get an answer I want); searched the groups, found