Debug image fails to load.

Hi,

I created an OS design with KITL, Kernel debugger enabled in Debug mode. But when i try to load the image to the CEPC it fails to boot. I am attaching the log here. 
------ SERIAL PORT LOG starts -----------
Microsoft Windows CE Ethernet Bootloader Common Library Version 1.0 Built Dec  9
 2002 18:35:13
Copyright (c) 2000-2001  Microsoft Corporation
Microsoft Windows CE Ethernet Bootloader 3.3 for CE/PC (Feb  6 2003)
Boot Args @ 0x1F136 and  ucLoaderFlags is 1
PCI Device Configurations (3 PCI bus(es) present)...
========================================================
 Bus, Device, Function = 0, 2, 0
 Vendor ID, Device ID  = 0x8086, 0x3582
 Base Class, Subclass  = 3, 0 => DISPLAY_CTLR
 Interrupt             = 9
 BaseAddress[0]        = 0xE8000000 (Memory)
 BaseAddress[1]        = 0xE0000000 (Memory)
 BaseAddress[2]        = 0x4400 (I/O)
========================================================
 Bus, Device, Function = 0, 2, 1
 Vendor ID, Device ID  = 0x8086, 0x3582
 Base Class, Subclass  = 3, 128 => DISPLAY_CTLR
 Interrupt             = 0
 BaseAddress[0]        = 0xF0000000 (Memory)
 BaseAddress[1]        = 0xE0080000 (Memory)
========================================================
 Bus, Device, Function = 0, 29, 0
 Vendor ID, Device ID  = 0x8086, 0x24C2
 Base Class, Subclass  = 12, 3 => SERIAL_BUS_CTLR
 Interrupt             = 9
 BaseAddress[4]        = 0x4800 (I/O)
========================================================
 Bus, Device, Function = 0, 29, 1
 Vendor ID, Device ID  = 0x8086, 0x24C4
 Base Class, Subclass  = 12, 3 => SERIAL_BUS_CTLR
 Interrupt             = 6
 BaseAddress[4]        = 0x4C00 (I/O)
========================================================
 Bus, Device, Function = 2, 3, 0
 Vendor ID, Device ID  = 0x8086, 0x1209
 Base Class, Subclass  = 2, 0 => NETWORK_CTLR
 Interrupt             = 9
 BaseAddress[0]        = 0xE0220000 (Memory)
 BaseAddress[1]        = 0x6000 (I/O)
 BaseAddress[2]        = 0xE0200000 (Memory)
========================================================
 Bus, Device, Function = 2, 8, 0
 Vendor ID, Device ID  = 0x8086, 0x103A
 Base Class, Subclass  = 2, 0 => NETWORK_CTLR
 Interrupt             = 10
 BaseAddress[0]        = 0xE0221000 (Memory)
 BaseAddress[1]        = 0x6400 (I/O)
========================================================
FindAllPCINetCard: Searching for PCI Ethernet NIC ...
FindALLPCINetCard(0): Found Ethernet NIC (IRQ=9, IOBase=0x6000, Type=7).
FindALLPCINetCard(1): Found Ethernet NIC (IRQ=10, IOBase=0x6400, Type=2).
FindPCINetCard:Argument IOBASE=0, IRQ=0,TYPE=2
FindPCINetCard:Found 2 PCI Ethernet NIC ...
FindPCINetCard: Found Ethernet NIC (IRQ=9, IOBase=0x6000).
Using I82559 Driver
+EDBG:I82559Init.Ver 1.3
EDBG:I82559Init using I/O range at 0x00006000
EDBG:I82559:HWInit
EDBG:I82559:Adapter = 0x80000
EDBG:I82559:adapter->CSRIoAddressMapped = 0x6000
Self-Test OK. Sig =D0A6C714, Results = 0
Using Phy at address 1 with link
Phy ID is 15402A8
Current speed=100, Current Duplex=2
-EDBG:I82559Init
Returned MAC Address:00:60:65:02:DA:FB
System ready!
Preparing for download...
OEMPreDownload  ucLoaderFlags is 0
Using device name: CEPC56059
Using static IP address: 1001A8C0
+EbootSendBootmeAndWaitForTftp
Sent BOOTME to 255.255.255.255
Locked Down Link 1
Src IP 192.168.1.16 Port 0400   Dest IP 192.168.1.11 Port 0456
EthDown::TFTPD_OPEN::boot.bin
-EbootSendBootmeAndWaitForTftp

Download BIN file information:
-----------------------------------------------------
[0]: Base Address=0x220000  Length=0x22D2720

Received a broadcast message
Received a broadcast message
Received a broadcast message
Received a broadcast message
Received a broadcast message
Received a broadcast message
Received a broadcast message
Received a broadcast message
Received a broadcast message
Received a broadcast message
Received a broadcast message
Received a broadcast message
Received a broadcast message
rom_offset=0x80000000.
Found pTOC signature.
ROMHDR at Address 00220044h
RomHdr.ulRAMStart=824F3000h RomHdr.physfirst=80220000h.
OEMLaunch   ucLoaderFlags is 7
Download successful! Jumping to image at 00226E30h...
Got EDBG_CMD_JUMPIMG
Got EDBG_CMD_CONFIG, flags:0x00000000
Lauch Windows CE from address 0x226E30
Debug Serial Init

SysInit: GDTBase=824f3000 IDTBase=8254a8c0 KData=824f9800
Windows CE Kernel for i486 Built on Sep 25 2009 at 11:03:29
INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0xb
PCIBIOS:: BIOS Address static map to addr=a00e0000
GetPicRoutingIrqTable: Start
                            search_pci_bios start
CE Ethernet Bootloader found 32Bit BIOS Entry master_bios32=a00f62a0 bios32_call
_offset=1d750 for CE/PC
                        Return from First BIOS EAX=49435000 EBX=fd560,ECX=aa0 ED
X=402
     32 PCI BIOS offset located.addr=1d962
                                          32 PCI BIOS Present EDX=20494350,EAX=1
 EBX=f0210,ECX=a02
                  +GetRoutingOption
search_pci_routing
search_pci_routing found entry =a00fdee0  CE/PC
                                                GetRoutingOption, found ROM vers
ion for Routing table.
GetRoutingOption return SUCCESS .AH=0
ScanConfiguredIrq with PCI Exclusive Irq Bit (wExClusive)  =0
ScanConfigureIrq: BufferSize = 192 @ address 824f6f8a
ScanConfigureIrq: for Bus=0 ,Device=30 SlotNumber=0
     INTA_LinkValue=60,INTA_IrqBitMap=def8
     INTB_LinkValue=61,INTB_IrqBitMap=def8
     INTC_LinkValue=62,INTC_IrqBitMap=def8
     INTD_LinkValue=63,INTD_IrqBitMap=def8
ScanConfigureIrq: for Bus=2 ,Device=3 SlotNumber=1
     INTA_LinkValue=60,INTA_IrqBitMap=def8
     INTB_LinkValue=61,INTB_IrqBitMap=def8
     INTC_LinkValue=62,INTC_IrqBitMap=def8
     INTD_LinkValue=63,INTD_IrqBitMap=def8
addIrqLink: LinkNumber=60,bus=2,device=3 associated with irq=9
ScanConfigureIrq: for Bus=2 ,Device=4 SlotNumber=2
     INTA_LinkValue=61,INTA_IrqBitMap=def8
     INTB_LinkValue=62,INTB_IrqBitMap=def8
     INTC_LinkValue=63,INTC_IrqBitMap=def8
     INTD_LinkValue=60,INTD_IrqBitMap=def8
ScanConfigureIrq: for Bus=2 ,Device=5 SlotNumber=3
     INTA_LinkValue=62,INTA_IrqBitMap=def8
     INTB_LinkValue=63,INTB_IrqBitMap=def8
     INTC_LinkValue=60,INTC_IrqBitMap=def8
     INTD_LinkValue=61,INTD_IrqBitMap=def8
ScanConfigureIrq: for Bus=2 ,Device=6 SlotNumber=4
     INTA_LinkValue=63,INTA_IrqBitMap=def8
     INTB_LinkValue=60,INTB_IrqBitMap=def8
     INTC_LinkValue=61,INTC_IrqBitMap=def8
     INTD_LinkValue=62,INTD_IrqBitMap=def8
ScanConfigureIrq: for Bus=2 ,Device=7 SlotNumber=5
     INTA_LinkValue=60,INTA_IrqBitMap=def8
     INTB_LinkValue=61,INTB_IrqBitMap=def8
     INTC_LinkValue=62,INTC_IrqBitMap=def8
     INTD_LinkValue=63,INTD_IrqBitMap=def8
ScanConfigureIrq: for Bus=2 ,Device=8 SlotNumber=0
     INTA_LinkValue=68,INTA_IrqBitMap=def8
     INTB_LinkValue=0,INTB_IrqBitMap=def8
     INTC_LinkValue=0,INTC_IrqBitMap=def8
     INTD_LinkValue=0,INTD_IrqBitMap=def8
addIrqLink: LinkNumber=68,bus=2,device=8 associated with irq=10
ScanConfigureIrq: for Bus=0 ,Device=0 SlotNumber=0
     INTA_LinkValue=60,INTA_IrqBitMap=def8
     INTB_LinkValue=61,INTB_IrqBitMap=def8
     INTC_LinkValue=62,INTC_IrqBitMap=def8
     INTD_LinkValue=63,INTD_IrqBitMap=def8
ScanConfigureIrq: for Bus=0 ,Device=31 SlotNumber=0
     INTA_LinkValue=62,INTA_IrqBitMap=def8
     INTB_LinkValue=61,INTB_IrqBitMap=def8
     INTC_LinkValue=0,INTC_IrqBitMap=def8
     INTD_LinkValue=0,INTD_IrqBitMap=def8
ScanConfigureIrq: for Bus=0 ,Device=29 SlotNumber=0
     INTA_LinkValue=60,INTA_IrqBitMap=def8
     INTB_LinkValue=63,INTB_IrqBitMap=def8
     INTC_LinkValue=62,INTC_IrqBitMap=def8
     INTD_LinkValue=6b,INTD_IrqBitMap=def8
addIrqLink: LinkNumber=60,bus=0,device=29 associated with irq=9
addIrqLink: LinkNumber=63,bus=0,device=29 associated with irq=6
ScanConfigureIrq: for Bus=0 ,Device=2 SlotNumber=0
     INTA_LinkValue=60,INTA_IrqBitMap=def8
     INTB_LinkValue=61,INTB_IrqBitMap=def8
     INTC_LinkValue=0,INTC_IrqBitMap=def8
     INTD_LinkValue=0,INTD_IrqBitMap=def8
addIrqLink: LinkNumber=60,bus=0,device=2 associated with irq=9
ScanConfigureIrq: for Bus=0 ,Device=1 SlotNumber=0
     INTA_LinkValue=60,INTA_IrqBitMap=def8
     INTB_LinkValue=61,INTB_IrqBitMap=def8
     INTC_LinkValue=0,INTC_IrqBitMap=def8
     INTD_LinkValue=0,INTD_IrqBitMap=def8
InitKitlNIC: Searching for PCI Ethernet NIC (dwIrq = 9, dwIoBase = 6000, dwDfltT
ype = 37) ...
InitKitlNIC: Can't find PCI Ethernet NIC, use specified data (type = 37, IRQ=9,
IOBase=0x6000).
DeviceId................. CEPC
pArgs->flags............. 0x39
pArgs->devLoc.IfcType.... -1
pArgs->devLoc.LogicalLoc. 0x6000
pArgs->devLoc.PhysicalLoc 0x0
pArgs->devLoc.Pin........ 9
pArgs->ip4address........ 1
pDevice->Name............  s
pDevice->ifcType......... -1
pDevice->id.............. 0x6000
pDevice->resource........ 0
pDevice->type............ 2
pDevice->pDriver......... 0x824FB118
I8255xInitDMABuffer: DMA address: 0x80200000 - size = 0x20000
I8255xInit: Init using i/o address : 0x6000 - stride = 0x6000
I8255xInit: dev i/o address : 0x6000
EEPROM I/O Base: 6000
00000000:00000060:00000065:00000002:000000DA:000000FB, I/O at 6000, IRQ 0.
I8255x: open() irq 0.
I8255x: Done open(), status 2050.
I8255xInit: SUCCESS!
x86KitlCreateName: Using Device Name 'CEPC56059'
OALKitlCreateName: Using Device Name 'CEPC56059'
KITL: *** Device Name CEPC56059 ***
WARN: KITL will run in polling mode
VBridge:: built on [Jul 10 2009] time [10:20:14]
VBridgeInit()...TX = [16384] bytes -- Rx = [16384] bytes
Tx buffer [0xA253C860] to [0xA2540860].
Rx buffer [0xA2540880] to [0xA2544880].
VBridge:: NK add MAC: [0-60-65-2-DA-FB]
Connecting to Desktop
KITL: Connected host  IP: 1  Port: 1109
------- SERIAL PORT LOG ends -----------
------- WINCE DEBUG LOG starts ---------
4294767296 PID:0 TID:2 Firmware Init
4294767296 PID:0 TID:2 Built Mar 18 2010 14:48:05
4294767296 PID:0 TID:2 RTC - Status Reg B - 0x02
4294767296 PID:0 TID:2 g_dwCPUFeatures = afe9f9ff
4294767296 PID:0 TID:2 g_nMtrrCnt = 8
4294767296 PID:0 TID:2 MTRR PhysMask0: 0000000fe0000800
4294767296 PID:0 TID:2 MTRR PhysBase0: 0000000000000006
4294767296 PID:0 TID:2 MTRR PhysMask1: 0000000ffff00800
4294767296 PID:0 TID:2 MTRR PhysBase1: 000000001f700000
4294767296 PID:0 TID:2 MTRR PhysMask2: 0000000fff800800
4294767296 PID:0 TID:2 MTRR PhysBase2: 000000001f800000
4294767296 PID:0 TID:2 MTRR PhysMask3: 0000000f00000000
4294767296 PID:0 TID:2 MTRR PhysBase3: 0000000000000000
4294767296 PID:0 TID:2 MTRR PhysMask4: 0000000f00000000
4294767296 PID:0 TID:2 MTRR PhysBase4: 0000000000000000
4294767296 PID:0 TID:2 MTRR PhysMask5: 0000000f00000000
4294767296 PID:0 TID:2 MTRR PhysBase5: 0000000000000000
4294767296 PID:0 TID:2 MTRR PhysMask6: 0000000f00000000
4294767296 PID:0 TID:2 MTRR PhysBase6: 0000000000000000
4294767296 PID:0 TID:2 MTRR PhysMask7: 0000000f00000000
4294767296 PID:0 TID:2 MTRR PhysBase7: 0000000000000000
4294767296 PID:0 TID:2 PhysMask0: 0000000fe0000800
4294767296 PID:0 TID:2 PhysMask1: 0000000ffff00800
4294767296 PID:0 TID:2 PhysMask2: 0000000fff800800
4294767296 PID:0 TID:2 PhysMask3: 0000000f00000000
4294767296 PID:0 TID:2 PhysMask4: 0000000f00000000
4294767296 PID:0 TID:2 PhysMask5: 0000000f00000000
4294767296 PID:0 TID:2 PhysMask6: 0000000f00000000
4294767296 PID:0 TID:2 PhysMask7: 0000000f00000000
4294767296 PID:0 TID:2 g_nMtrrInuse = 3
4294767296 PID:0 TID:2 OEM Extra DRAM Detected @ base = xA3E20000, size=440 MB 
4294767296 PID:0 TID:2 Looking for rom chain
4294767296 PID:0 TID:2 Rom chain NOT found
4294767296 PID:0 TID:2 B&R disLegacyUsbSupport : Disabling USB legacy
4294767296 PID:0 TID:2 INTA-D Routing @ 60 = 6800509
4294767296 PID:0 TID:2 INTE-H Routing @ 68 = b80800a
4294767296 PID:0 TID:2 4D0-1 1:e 0:60
4294767296 PID:0 TID:2 Firmware Init Done.
4294767296 PID:0 TID:2 Setting up softlog at 0x9f61c000 for 0x800 entries
4294767296 PID:0 TID:2 Booting Windows CE version 6.00 for (x86)
4294767296 PID:0 TID:2 &pTOC = 82549f10, pTOC = 824f044c, pTOC->ulRamFree = 82552000, MemForPT = 00003000
4294767296 PID:0 TID:2 
Old or invalid version stamp in kernel structures - starting clean!
4294767296 PID:0 TID:2 Configuring: Primary pages: 118923, Secondary pages: 0, Filesystem pages = 32751
4294767296 PID:0 TID:2 
Booting kernel with clean memory configuration:
4294767296 PID:0 TID:2 Memory Sections:
4294767296 PID:0 TID:2 [0] : start: 82556000, extension: 0003b000, length: 1d08b000
4294767296 PID:0 TID:2 X86Init done, OEMAddressTable = 80226e50, RAM mapped = 20000000.
4294767296 PID:0 TID:2 Windows CE KernelInit
4294767298 PID:400002 TID:2 Reserve VM for kernel XIP DLls, first = c0010000, last = c0f20000
4294767298 PID:400002 TID:2 g_pprcNK == 0x82547c80
4294767298 PID:400002 TID:410002 Updated eptr->e32_vsize to = 00013000
4294767298 PID:400002 TID:410002 Initializing Memory Mapped File Support
4294767298 PID:400002 TID:410002 Scheduling the first thread.
4294767298 PID:400002 TID:410002 LoaderInit: Initialing loader
4294767299 PID:400002 TID:410002 Updated eptr->e32_vsize to = 00013000
4294767299 PID:400002 TID:410002 Updated eptr->e32_vsize to = 00074000
4294767299 PID:400002 TID:410002 Updated eptr->e32_vsize to = 00013000
4294767300 PID:400002 TID:410002 Did not find emulation code for x86... using floating point hardware.
4294767301 PID:400002 TID:410002 PGPOOL: Reserved 768 pages for Loader pool
4294767301 PID:400002 TID:410002 PGPOOL: Reserved 256 pages for File pool
4294767302 PID:400002 TID:410002 OSAXST0: Platform Name = CEPC
4294767303 PID:400002 TID:410002 OSAXST1: >>> Loading Module 'kd.dll' (0x9F5FB6A0) at address 0xC0010000-0xC003E000 in Process 'NK.EXE' (0x82547C80)
4294767303 PID:400002 TID:410002 KD: Starting kernel debugger software probe (KdStub) - KD API version 22
4294767303 PID:400002 TID:410002 Calling KDEnableInt (FALSE, NULL) without previously calling KDEnableInt (FALSE, p)
4294767303 PID:400002 TID:410002 OSAXST1: >>> Loading Module 'NK.EXE' (0x82547C80) at address 0x80220000-0x80233000 in Process 'NK.EXE' (0x82547C80)
--------- WINCE DEBUG LOG ends ---------

What am i missing here?
Thanks 
neo



Submitted via EggHeadCafe - Software Developer Portal of Choice 
BizTalk Custom Pipeline for Splitting Messages
http://www.eggheadcafe.com/tutorials/aspnet/a0786aaf-c159-40ff-9cf6-241d5e325f42/biztalk-custom-pipeline-f.aspx
0
neo
3/18/2010 10:30:01 AM
windowsce.platbuilder 744 articles. 0 followers. Follow

1 Replies
1461 Views

Similar Articles

[PageSpeed] 50

For fun, try running without kitl or the kernel debugger (set IMGNOKITL=1, 
IMGNODEBUGGER=1 and re-run makeimg).  This will remove any problem with the 
kitl routines themselves, and you should continue to get output from the 
debug serial port.

-- 
Dean Ramsier - eMVP
BSQUARE Corporation


<neo> wrote in message news:20103186300vikram186@gmail.com...
> Hi,
>
> I created an OS design with KITL, Kernel debugger enabled in Debug mode. 
> But when i try to load the image to the CEPC it fails to boot. I am 
> attaching the log here.
> ------ SERIAL PORT LOG starts -----------
> Microsoft Windows CE Ethernet Bootloader Common Library Version 1.0 Built 
> Dec  9
> 2002 18:35:13
> Copyright (c) 2000-2001  Microsoft Corporation
> Microsoft Windows CE Ethernet Bootloader 3.3 for CE/PC (Feb  6 2003)
> Boot Args @ 0x1F136 and  ucLoaderFlags is 1
> PCI Device Configurations (3 PCI bus(es) present)...
> ========================================================
> Bus, Device, Function = 0, 2, 0
> Vendor ID, Device ID  = 0x8086, 0x3582
> Base Class, Subclass  = 3, 0 => DISPLAY_CTLR
> Interrupt             = 9
> BaseAddress[0]        = 0xE8000000 (Memory)
> BaseAddress[1]        = 0xE0000000 (Memory)
> BaseAddress[2]        = 0x4400 (I/O)
> ========================================================
> Bus, Device, Function = 0, 2, 1
> Vendor ID, Device ID  = 0x8086, 0x3582
> Base Class, Subclass  = 3, 128 => DISPLAY_CTLR
> Interrupt             = 0
> BaseAddress[0]        = 0xF0000000 (Memory)
> BaseAddress[1]        = 0xE0080000 (Memory)
> ========================================================
> Bus, Device, Function = 0, 29, 0
> Vendor ID, Device ID  = 0x8086, 0x24C2
> Base Class, Subclass  = 12, 3 => SERIAL_BUS_CTLR
> Interrupt             = 9
> BaseAddress[4]        = 0x4800 (I/O)
> ========================================================
> Bus, Device, Function = 0, 29, 1
> Vendor ID, Device ID  = 0x8086, 0x24C4
> Base Class, Subclass  = 12, 3 => SERIAL_BUS_CTLR
> Interrupt             = 6
> BaseAddress[4]        = 0x4C00 (I/O)
> ========================================================
> Bus, Device, Function = 2, 3, 0
> Vendor ID, Device ID  = 0x8086, 0x1209
> Base Class, Subclass  = 2, 0 => NETWORK_CTLR
> Interrupt             = 9
> BaseAddress[0]        = 0xE0220000 (Memory)
> BaseAddress[1]        = 0x6000 (I/O)
> BaseAddress[2]        = 0xE0200000 (Memory)
> ========================================================
> Bus, Device, Function = 2, 8, 0
> Vendor ID, Device ID  = 0x8086, 0x103A
> Base Class, Subclass  = 2, 0 => NETWORK_CTLR
> Interrupt             = 10
> BaseAddress[0]        = 0xE0221000 (Memory)
> BaseAddress[1]        = 0x6400 (I/O)
> ========================================================
> FindAllPCINetCard: Searching for PCI Ethernet NIC ...
> FindALLPCINetCard(0): Found Ethernet NIC (IRQ=9, IOBase=0x6000, Type=7).
> FindALLPCINetCard(1): Found Ethernet NIC (IRQ=10, IOBase=0x6400, Type=2).
> FindPCINetCard:Argument IOBASE=0, IRQ=0,TYPE=2
> FindPCINetCard:Found 2 PCI Ethernet NIC ...
> FindPCINetCard: Found Ethernet NIC (IRQ=9, IOBase=0x6000).
> Using I82559 Driver
> +EDBG:I82559Init.Ver 1.3
> EDBG:I82559Init using I/O range at 0x00006000
> EDBG:I82559:HWInit
> EDBG:I82559:Adapter = 0x80000
> EDBG:I82559:adapter->CSRIoAddressMapped = 0x6000
> Self-Test OK. Sig =D0A6C714, Results = 0
> Using Phy at address 1 with link
> Phy ID is 15402A8
> Current speed=100, Current Duplex=2
> -EDBG:I82559Init
> Returned MAC Address:00:60:65:02:DA:FB
> System ready!
> Preparing for download...
> OEMPreDownload  ucLoaderFlags is 0
> Using device name: CEPC56059
> Using static IP address: 1001A8C0
> +EbootSendBootmeAndWaitForTftp
> Sent BOOTME to 255.255.255.255
> Locked Down Link 1
> Src IP 192.168.1.16 Port 0400   Dest IP 192.168.1.11 Port 0456
> EthDown::TFTPD_OPEN::boot.bin
> -EbootSendBootmeAndWaitForTftp
>
> Download BIN file information:
> -----------------------------------------------------
> [0]: Base Address=0x220000  Length=0x22D2720
>
> Received a broadcast message
> Received a broadcast message
> Received a broadcast message
> Received a broadcast message
> Received a broadcast message
> Received a broadcast message
> Received a broadcast message
> Received a broadcast message
> Received a broadcast message
> Received a broadcast message
> Received a broadcast message
> Received a broadcast message
> Received a broadcast message
> rom_offset=0x80000000.
> Found pTOC signature.
> ROMHDR at Address 00220044h
> RomHdr.ulRAMStart=824F3000h RomHdr.physfirst=80220000h.
> OEMLaunch   ucLoaderFlags is 7
> Download successful! Jumping to image at 00226E30h...
> Got EDBG_CMD_JUMPIMG
> Got EDBG_CMD_CONFIG, flags:0x00000000
> Lauch Windows CE from address 0x226E30
> Debug Serial Init
>
> SysInit: GDTBase=824f3000 IDTBase=8254a8c0 KData=824f9800
> Windows CE Kernel for i486 Built on Sep 25 2009 at 11:03:29
> INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0xb
> PCIBIOS:: BIOS Address static map to addr=a00e0000
> GetPicRoutingIrqTable: Start
>                            search_pci_bios start
> CE Ethernet Bootloader found 32Bit BIOS Entry master_bios32=a00f62a0 
> bios32_call
> _offset=1d750 for CE/PC
>                        Return from First BIOS EAX=49435000 
> EBX=fd560,ECX=aa0 ED
> X=402
>     32 PCI BIOS offset located.addr=1d962
>                                          32 PCI BIOS Present 
> EDX=20494350,EAX=1
> EBX=f0210,ECX=a02
>                  +GetRoutingOption
> search_pci_routing
> search_pci_routing found entry =a00fdee0  CE/PC
>                                                GetRoutingOption, found ROM 
> vers
> ion for Routing table.
> GetRoutingOption return SUCCESS .AH=0
> ScanConfiguredIrq with PCI Exclusive Irq Bit (wExClusive)  =0
> ScanConfigureIrq: BufferSize = 192 @ address 824f6f8a
> ScanConfigureIrq: for Bus=0 ,Device=30 SlotNumber=0
>     INTA_LinkValue=60,INTA_IrqBitMap=def8
>     INTB_LinkValue=61,INTB_IrqBitMap=def8
>     INTC_LinkValue=62,INTC_IrqBitMap=def8
>     INTD_LinkValue=63,INTD_IrqBitMap=def8
> ScanConfigureIrq: for Bus=2 ,Device=3 SlotNumber=1
>     INTA_LinkValue=60,INTA_IrqBitMap=def8
>     INTB_LinkValue=61,INTB_IrqBitMap=def8
>     INTC_LinkValue=62,INTC_IrqBitMap=def8
>     INTD_LinkValue=63,INTD_IrqBitMap=def8
> addIrqLink: LinkNumber=60,bus=2,device=3 associated with irq=9
> ScanConfigureIrq: for Bus=2 ,Device=4 SlotNumber=2
>     INTA_LinkValue=61,INTA_IrqBitMap=def8
>     INTB_LinkValue=62,INTB_IrqBitMap=def8
>     INTC_LinkValue=63,INTC_IrqBitMap=def8
>     INTD_LinkValue=60,INTD_IrqBitMap=def8
> ScanConfigureIrq: for Bus=2 ,Device=5 SlotNumber=3
>     INTA_LinkValue=62,INTA_IrqBitMap=def8
>     INTB_LinkValue=63,INTB_IrqBitMap=def8
>     INTC_LinkValue=60,INTC_IrqBitMap=def8
>     INTD_LinkValue=61,INTD_IrqBitMap=def8
> ScanConfigureIrq: for Bus=2 ,Device=6 SlotNumber=4
>     INTA_LinkValue=63,INTA_IrqBitMap=def8
>     INTB_LinkValue=60,INTB_IrqBitMap=def8
>     INTC_LinkValue=61,INTC_IrqBitMap=def8
>     INTD_LinkValue=62,INTD_IrqBitMap=def8
> ScanConfigureIrq: for Bus=2 ,Device=7 SlotNumber=5
>     INTA_LinkValue=60,INTA_IrqBitMap=def8
>     INTB_LinkValue=61,INTB_IrqBitMap=def8
>     INTC_LinkValue=62,INTC_IrqBitMap=def8
>     INTD_LinkValue=63,INTD_IrqBitMap=def8
> ScanConfigureIrq: for Bus=2 ,Device=8 SlotNumber=0
>     INTA_LinkValue=68,INTA_IrqBitMap=def8
>     INTB_LinkValue=0,INTB_IrqBitMap=def8
>     INTC_LinkValue=0,INTC_IrqBitMap=def8
>     INTD_LinkValue=0,INTD_IrqBitMap=def8
> addIrqLink: LinkNumber=68,bus=2,device=8 associated with irq=10
> ScanConfigureIrq: for Bus=0 ,Device=0 SlotNumber=0
>     INTA_LinkValue=60,INTA_IrqBitMap=def8
>     INTB_LinkValue=61,INTB_IrqBitMap=def8
>     INTC_LinkValue=62,INTC_IrqBitMap=def8
>     INTD_LinkValue=63,INTD_IrqBitMap=def8
> ScanConfigureIrq: for Bus=0 ,Device=31 SlotNumber=0
>     INTA_LinkValue=62,INTA_IrqBitMap=def8
>     INTB_LinkValue=61,INTB_IrqBitMap=def8
>     INTC_LinkValue=0,INTC_IrqBitMap=def8
>     INTD_LinkValue=0,INTD_IrqBitMap=def8
> ScanConfigureIrq: for Bus=0 ,Device=29 SlotNumber=0
>     INTA_LinkValue=60,INTA_IrqBitMap=def8
>     INTB_LinkValue=63,INTB_IrqBitMap=def8
>     INTC_LinkValue=62,INTC_IrqBitMap=def8
>     INTD_LinkValue=6b,INTD_IrqBitMap=def8
> addIrqLink: LinkNumber=60,bus=0,device=29 associated with irq=9
> addIrqLink: LinkNumber=63,bus=0,device=29 associated with irq=6
> ScanConfigureIrq: for Bus=0 ,Device=2 SlotNumber=0
>     INTA_LinkValue=60,INTA_IrqBitMap=def8
>     INTB_LinkValue=61,INTB_IrqBitMap=def8
>     INTC_LinkValue=0,INTC_IrqBitMap=def8
>     INTD_LinkValue=0,INTD_IrqBitMap=def8
> addIrqLink: LinkNumber=60,bus=0,device=2 associated with irq=9
> ScanConfigureIrq: for Bus=0 ,Device=1 SlotNumber=0
>     INTA_LinkValue=60,INTA_IrqBitMap=def8
>     INTB_LinkValue=61,INTB_IrqBitMap=def8
>     INTC_LinkValue=0,INTC_IrqBitMap=def8
>     INTD_LinkValue=0,INTD_IrqBitMap=def8
> InitKitlNIC: Searching for PCI Ethernet NIC (dwIrq = 9, dwIoBase = 6000, 
> dwDfltT
> ype = 37) ...
> InitKitlNIC: Can't find PCI Ethernet NIC, use specified data (type = 37, 
> IRQ=9,
> IOBase=0x6000).
> DeviceId................. CEPC
> pArgs->flags............. 0x39
> pArgs->devLoc.IfcType.... -1
> pArgs->devLoc.LogicalLoc. 0x6000
> pArgs->devLoc.PhysicalLoc 0x0
> pArgs->devLoc.Pin........ 9
> pArgs->ip4address........ 1
> pDevice->Name............  s
> pDevice->ifcType......... -1
> pDevice->id.............. 0x6000
> pDevice->resource........ 0
> pDevice->type............ 2
> pDevice->pDriver......... 0x824FB118
> I8255xInitDMABuffer: DMA address: 0x80200000 - size = 0x20000
> I8255xInit: Init using i/o address : 0x6000 - stride = 0x6000
> I8255xInit: dev i/o address : 0x6000
> EEPROM I/O Base: 6000
> 00000000:00000060:00000065:00000002:000000DA:000000FB, I/O at 6000, IRQ 0.
> I8255x: open() irq 0.
> I8255x: Done open(), status 2050.
> I8255xInit: SUCCESS!
> x86KitlCreateName: Using Device Name 'CEPC56059'
> OALKitlCreateName: Using Device Name 'CEPC56059'
> KITL: *** Device Name CEPC56059 ***
> WARN: KITL will run in polling mode
> VBridge:: built on [Jul 10 2009] time [10:20:14]
> VBridgeInit()...TX = [16384] bytes -- Rx = [16384] bytes
> Tx buffer [0xA253C860] to [0xA2540860].
> Rx buffer [0xA2540880] to [0xA2544880].
> VBridge:: NK add MAC: [0-60-65-2-DA-FB]
> Connecting to Desktop
> KITL: Connected host  IP: 1  Port: 1109
> ------- SERIAL PORT LOG ends -----------
> ------- WINCE DEBUG LOG starts ---------
> 4294767296 PID:0 TID:2 Firmware Init
> 4294767296 PID:0 TID:2 Built Mar 18 2010 14:48:05
> 4294767296 PID:0 TID:2 RTC - Status Reg B - 0x02
> 4294767296 PID:0 TID:2 g_dwCPUFeatures = afe9f9ff
> 4294767296 PID:0 TID:2 g_nMtrrCnt = 8
> 4294767296 PID:0 TID:2 MTRR PhysMask0: 0000000fe0000800
> 4294767296 PID:0 TID:2 MTRR PhysBase0: 0000000000000006
> 4294767296 PID:0 TID:2 MTRR PhysMask1: 0000000ffff00800
> 4294767296 PID:0 TID:2 MTRR PhysBase1: 000000001f700000
> 4294767296 PID:0 TID:2 MTRR PhysMask2: 0000000fff800800
> 4294767296 PID:0 TID:2 MTRR PhysBase2: 000000001f800000
> 4294767296 PID:0 TID:2 MTRR PhysMask3: 0000000f00000000
> 4294767296 PID:0 TID:2 MTRR PhysBase3: 0000000000000000
> 4294767296 PID:0 TID:2 MTRR PhysMask4: 0000000f00000000
> 4294767296 PID:0 TID:2 MTRR PhysBase4: 0000000000000000
> 4294767296 PID:0 TID:2 MTRR PhysMask5: 0000000f00000000
> 4294767296 PID:0 TID:2 MTRR PhysBase5: 0000000000000000
> 4294767296 PID:0 TID:2 MTRR PhysMask6: 0000000f00000000
> 4294767296 PID:0 TID:2 MTRR PhysBase6: 0000000000000000
> 4294767296 PID:0 TID:2 MTRR PhysMask7: 0000000f00000000
> 4294767296 PID:0 TID:2 MTRR PhysBase7: 0000000000000000
> 4294767296 PID:0 TID:2 PhysMask0: 0000000fe0000800
> 4294767296 PID:0 TID:2 PhysMask1: 0000000ffff00800
> 4294767296 PID:0 TID:2 PhysMask2: 0000000fff800800
> 4294767296 PID:0 TID:2 PhysMask3: 0000000f00000000
> 4294767296 PID:0 TID:2 PhysMask4: 0000000f00000000
> 4294767296 PID:0 TID:2 PhysMask5: 0000000f00000000
> 4294767296 PID:0 TID:2 PhysMask6: 0000000f00000000
> 4294767296 PID:0 TID:2 PhysMask7: 0000000f00000000
> 4294767296 PID:0 TID:2 g_nMtrrInuse = 3
> 4294767296 PID:0 TID:2 OEM Extra DRAM Detected @ base = xA3E20000, 
> size=440 MB
> 4294767296 PID:0 TID:2 Looking for rom chain
> 4294767296 PID:0 TID:2 Rom chain NOT found
> 4294767296 PID:0 TID:2 B&R disLegacyUsbSupport : Disabling USB legacy
> 4294767296 PID:0 TID:2 INTA-D Routing @ 60 = 6800509
> 4294767296 PID:0 TID:2 INTE-H Routing @ 68 = b80800a
> 4294767296 PID:0 TID:2 4D0-1 1:e 0:60
> 4294767296 PID:0 TID:2 Firmware Init Done.
> 4294767296 PID:0 TID:2 Setting up softlog at 0x9f61c000 for 0x800 entries
> 4294767296 PID:0 TID:2 Booting Windows CE version 6.00 for (x86)
> 4294767296 PID:0 TID:2 &pTOC = 82549f10, pTOC = 824f044c, pTOC->ulRamFree 
> = 82552000, MemForPT = 00003000
> 4294767296 PID:0 TID:2
> Old or invalid version stamp in kernel structures - starting clean!
> 4294767296 PID:0 TID:2 Configuring: Primary pages: 118923, Secondary 
> pages: 0, Filesystem pages = 32751
> 4294767296 PID:0 TID:2
> Booting kernel with clean memory configuration:
> 4294767296 PID:0 TID:2 Memory Sections:
> 4294767296 PID:0 TID:2 [0] : start: 82556000, extension: 0003b000, length: 
> 1d08b000
> 4294767296 PID:0 TID:2 X86Init done, OEMAddressTable = 80226e50, RAM 
> mapped = 20000000.
> 4294767296 PID:0 TID:2 Windows CE KernelInit
> 4294767298 PID:400002 TID:2 Reserve VM for kernel XIP DLls, first = 
> c0010000, last = c0f20000
> 4294767298 PID:400002 TID:2 g_pprcNK == 0x82547c80
> 4294767298 PID:400002 TID:410002 Updated eptr->e32_vsize to = 00013000
> 4294767298 PID:400002 TID:410002 Initializing Memory Mapped File Support
> 4294767298 PID:400002 TID:410002 Scheduling the first thread.
> 4294767298 PID:400002 TID:410002 LoaderInit: Initialing loader
> 4294767299 PID:400002 TID:410002 Updated eptr->e32_vsize to = 00013000
> 4294767299 PID:400002 TID:410002 Updated eptr->e32_vsize to = 00074000
> 4294767299 PID:400002 TID:410002 Updated eptr->e32_vsize to = 00013000
> 4294767300 PID:400002 TID:410002 Did not find emulation code for x86... 
> using floating point hardware.
> 4294767301 PID:400002 TID:410002 PGPOOL: Reserved 768 pages for Loader 
> pool
> 4294767301 PID:400002 TID:410002 PGPOOL: Reserved 256 pages for File pool
> 4294767302 PID:400002 TID:410002 OSAXST0: Platform Name = CEPC
> 4294767303 PID:400002 TID:410002 OSAXST1: >>> Loading Module 'kd.dll' 
> (0x9F5FB6A0) at address 0xC0010000-0xC003E000 in Process 'NK.EXE' 
> (0x82547C80)
> 4294767303 PID:400002 TID:410002 KD: Starting kernel debugger software 
> probe (KdStub) - KD API version 22
> 4294767303 PID:400002 TID:410002 Calling KDEnableInt (FALSE, NULL) without 
> previously calling KDEnableInt (FALSE, p)
> 4294767303 PID:400002 TID:410002 OSAXST1: >>> Loading Module 'NK.EXE' 
> (0x82547C80) at address 0x80220000-0x80233000 in Process 'NK.EXE' 
> (0x82547C80)
> --------- WINCE DEBUG LOG ends ---------
>
> What am i missing here?
> Thanks
> neo
>
>
>
> Submitted via EggHeadCafe - Software Developer Portal of Choice
> BizTalk Custom Pipeline for Splitting Messages
> http://www.eggheadcafe.com/tutorials/aspnet/a0786aaf-c159-40ff-9cf6-241d5e325f42/biztalk-custom-pipeline-f.aspx 


0
Dean
3/18/2010 3:13:23 PM
Reply:

Similar Artilces:

How to reinstall failed updates in Windows 7
How do i try to reinstall failed updates ? Seems windows update doesn't support that. I have Windows 7. Suggest you post this to the Windows 7 forum instead of the * Windows Update * newsgroup: http://social.answers.microsoft.com/Forums/en-US/w7install/threads "JamesW" wrote: > How do i try to reinstall failed updates ? > > Seems windows update doesn't support that. > > I have Windows 7. Ditto - another Win7 user here - when I follow recommendation to troubleshoot on the error code "WindowsUpdate_8020000E" appears as non...

Debug Assertion Faild
Debug Assertion Fail Program: C:..... File: winocc.cp Line: 22 The exception Breakpoin A breakpoint has been reache (0x80000003) occurred in the application at location 0x5f4369c This program is to scan a file and look for a matching string. Could this error be caused by code not exiting a "break;" properly? I'm not sure how to explore resolving this. The information listed in the Debug is The thread 0x3DD8 has exited with code 0 (0x0) The thread 0x3EA8 has exited with code -2147483645 (0x80000003) The program 'C:\Documents and Settings\Owner\My Documents\Dads\Programmi...

When the VBA Project is locked the Save As Method fails in Excel
I cannot find a resolution. I already have the VB Code secure (the VBA Project is locked). When the Project is locked the Save As Method fails. If the VBA Project is not locked, the Save As Method works successfully. I cannot seem to find anything that addresses that situation. Do I need to get a digital signature? Do you think that will fix the problem? ...

DEBUG
Curious, new problem has started. Evey once in a whle a new folder appears on my desktop labeled "debug"..The folder is empty and I do not know how it is formed or why..Does someone know the cause of this and a remedy so it does not appear again Thanks Running Xp professtional heshie wrote: > Curious, new problem has started. Evey once in a whle a new folder appears on > my desktop labeled "debug"..The folder is empty and I do not know how it is > formed or why..Does someone know the cause of this and a remedy so it does > not appear again &g...

OWA Fails to Load
Two OWA environments are failing with the same behavior. 1) The first environment is Windows NT 4 SP6a running Exchange 5.5 SP4. OWA is hosted on seperate NT box running IIS. IIS box must be restarted to temporarilly solve problem. Works for a day or so then main OWA page fails to talk to Exchange box after login and simply hangs with no erors, or gives an ASP error, but nothing in eventlogs. Cannot restart WWW service on IIS box. 2) Second environment is Windows 2000 SP4 running Exchange 5.5 SP4 and IIS on the same box. Same behavior as first environment. OWA hangs after login and does...

Loading multiple resource files
Hello Experts, My project requires to load several resource files that are in different languages at the same time. Of course, these resources have the same ID. Since the last resource is the active resource; we are thinking of creating a dynamic table and populate this with the resource string table. The problem is; (1) Is there a structure to traverse through the STRINGTABLE (2) How do I enumerate the strings in the stringtable and the respective IDs Thank you, SG Why do you need to load all the resource files if they are identical except for the language? Why not load the requi...

imbed image
Version: 2004 Operating System: Mac OS X 10.6 (Snow Leopard) Processor: Intel how do i embed an image in a word document which will be pasted into an email document without it showing as an attachment? Question too short: can't answer. On 1/05/10 12:28 PM, in article 59bb7bf1.-1@webcrossing.JaKIaxP2ac0, "fbrick@officeformac.com" <fbrick@officeformac.com> wrote: > Version: 2004 Operating System: Mac OS X 10.6 (Snow Leopard) Processor: Intel > how do i embed an image in a word document which will be pasted into an email > document without it showing...

An application crashes only under debugging
Hi, I'm using VC++ 6.0. I have a Win32 Application (I will call it "EXE") which is linked with a Win32 DLL and I don't have the source files of the DLL; When I execute the EXE by double-clicking on the icon reprsenting it , there are no problems; On the contrary, if I try to debug the EXE the program crashes: in fact, the debugger shows an "Access Violation" error message and informs that an istruction of the DLL attempts to read a memory location which cannot be read. Does someone know a possible cause of this problem? Thanks. M If the DLL is an MFC DLL (it is...

too many formulas causing slow workbook load?
i have a workbook that i am working on for my employer this book has approx 1200 diff formulas on the sheet. each one i pulling info off of another shared workbook. when i orig. began worki on this, it would load immediately. now this thing is taking 2+ minute to load each time. could it be that there are too many formulas on th sheet and they are taking so long to calculate that its just loadin slow? the workbook itself is about 176 KB total. any ideas o suggestions -- Message posted from http://www.ExcelForum.com see http://www.mvps.org/dmcritchie/excel/slowresp.htm "three6o...

Links to external images and printing the images
I am in the very beginning stages of developing a database for someone in sort of an HR function in our organization. She needs to be able to keep track of various employment qualifications - certification dates, drivers license status, etc. The tricky request she has given me is that she wants to click on a button/record/somesuch for an employee, and have it bring up the appropriate scanned image, such as a scan of the drivers' license, and then print it. I was thinking of using the attachments feature in Access 2007 (which i will be developing in), but saw that the attachment total for t...

Portfolio Manger Fails
I see where others have a similar problem, but have read no solution. After "upgrading" from Money2004 to Money2005, the portfolio manager pages shows a blank screen. No investment information whatsoever. Any ideas on a work around.... In microsoft.public.money, brawn wrote: >I see where others have a similar problem, but have read no solution. After >"upgrading" from Money2004 to Money2005, the portfolio manager pages shows a >blank screen. No investment information whatsoever. Any ideas on a work >around.... Does Help->About show version 14.0...

State Image
Is there an example of how to use a state image with a CListCtrl somewhere. Is there a limit to the number of states I can have? Can I draw my own image as required and if so what do I put in the image list? Thanks. You can have any number of state images in the imagelist. Yes you can draw your own state images. Create a bitmap, either in an external image editor or use the resource editor in the Visual studio. You would anyway be indexing into the imagelist to make use of it. Create a ListControl in the resource editor and set it have the view type as report. 1) CImageList imgState;...

Authentication failed because Entourage doesn't support any of the available authentication methods. 04-13-10
Version: 2008 Operating System: Mac OS X 10.6 (Snow Leopard) Processor: Intel Email Client: pop Out of a sudden, i can't send out email and received the above error message. <br><br>For incoming email, i've no problem receiving. <br><br>I've not done any changes in my email account setting. <br><br>Anyone encountered the same problem? Please assist and advice. <br><br>Thanks ...

Weird: CRichEditCtrl scrollbars work in debug build but not in release build
Hi, I have an App Wizard project (VS 6.0), non doc-view architecture. My view class is: class CRichTextView : public CRichEditCtrl. In MainFrm.cpp I have a member variable of: CRichTextView m_wndView;. I create the view as follows: if (!m_wndView.Create(WS_CHILD | WS_VISIBLE | ES_AUTOVSCROLL | ES_MULTILINE | WS_VSCROLL, CRect(0,0,0,0), this, AFX_IDW_PANE_FIRST)) { TRACE0("Failed to create view window\n"); return -1; } It works "just peachy" in the debug build. But, when I make...

PS2.0 Import-Module fails with FileLoadException
Hi, I have a clean Windows Server 2008 R2 machine. When I open a PS Modules window, I see the following error: Import-Module : Could not load file or assembly 'rmconfighelper' or one of its dependencies. An argument was out of its legal range. (Exception from HRESULT: 0x80131502) At line:24 char:34 + Import-Module <<<< $_.Name -ErrorAction SilentlyContinue + CategoryInfo : NotSpecified: (:) [Import-Module], FileLoadException + FullyQualifiedErrorId : System.IO.FileLoadException,Microsoft.PowerShell.Commands.ImportModule...

Image selection tool
Hi, I have a application,where i will display the images. It has a option to zoom the image also there is a scroll bar. Now i want to implement the selection tool,which allows the user to select some part of the image. Is there any sample code to implement this? Regards John John, You'll want to check the CRectTracker class. Johan Rosengren Abstrakt Mekanik AB "John" <John@nowhere.com> wrote in message news:0c8f01c35cd6$9ab955e0$a301280a@phx.gbl... > Hi, > > I have a application,where i will display the images. It > has a option to zoom the image also ...

Aspect ratio of image differs in print
I have a protected xlt-document with a company logotype in the position of a header. I can´t put the image in the real header because I have to use the space by the image for other things. My problem is that the aspect of the image changes when I print the document. Om the computer screen it looks good and the preferences have the correct value but when I print the document the image gets squared instead of beeing higher than wide. The top and bottom margin of the document is 1 cm and the printing setting is for the document to maintain 100% of its size. I hope anyone can either ...

Installation of KB982311 Failed
Running current Windows XP Pro SP3 system with Office 2002. Attempted install of latest June 2nd Tuesday updates and KB982311 failed to install. I have the same problem when the system tries to autoupdate KB982311. The error code is 0x80070643 - and the system keeps trying to install this particular update. I am running Windows XP SP3. All other updates from june 11th 2010 installed without problems - only this one failed. I don't have a genuine Microsoft Office 2003 installation - only the free Office Viewers from Microsoft - maye that's the reason, though it has ...

IIS load issues
Hi all, I think I found the source of my Timeout issue. It seems as if the IIS service "steals" all the available CPU time. Let me explain.. If I run iisreset, the w3wp.exe process stays at a low 0- 5% usage. It stays this way until a user logs onto mscrm using the thin client (ie). It then goes up to as high as 90-95% no matter if the user is actually using the system or closes the application immediatly. Has anyone ever encounted this error before? Is it a known issue? Are there any workaround? Best regards, Benny Olsson Benny, Does it stay at this level for an ext...

Outlook 2007 Image Preview
Images that are included in incoming and outgoing messages are oversized in the display, both the preview and when I open the message. This includes icon images when a file is attached in a message. For instance, in the case of an icon, the icon is larger than half the screen. I have been unable to find out what is causing this issue. ...

Debug in Release mode?
Old wine in old bottle.. being served by a new bartender :o) How do I do this? pointer would be much appreciated. >Old wine in old bottle.. being served by a new bartender :o) > >How do I do this? The subject or the content? To debug a release build see "How to: Debug a Release Build" in your VC++ help. Dave In addition to what Dave suggested you might want to just do a find on this newsgroup using those keywords. There have been several discussions on that topic in the last few days that should pop up a bunch of links. If you can't find them let me know and ...

Very strange debugging problem
I have a windows console program that interfaces with a library that interfaces with a hardware device. I run the same unmodified program with the same input and get different results on different trials. My program is the same, the test data is the same, yet different runs produce different results. There are only two sorts of things that I can think of that could cause this: (1) The state of the hardware device changes between runs. (2) Some really weird memory error that causes my program to run correctly 75% of this time and fail other times. Does anyone have any ideas on how I ca...

Debugging
Hi, I have an access violation in my program when closing, apart from that things are working in debug mode. This is difficult to deal due to a lack of information. One message I get is as below, is there anyway to turn this into something meaningful? Heap block at 009B1C68 modified at 009B2370 past requested size of 700 The stack trace shows ntdll! 77f75a58() What can I use to track problems like this down? I must be accessing restricted memory during the deallocation of objects or misusing the mfc, I do not know, though there does not appear to be any memory leaks. I did have memor...

Outlook Operation Failed
When I click on the "send - receive" button, a window pops up saying "Operation Failed". Does my computer have some kind of infection? Hi Jennifer, please create a new profile! And please dont post twice! -- Gestern gings noch, ICH habe nichts gemacht! ;-) Bravestar@Datenschutzministerium.de "Jennifer" <jenncady@ezsg.com> schrieb im Newsbeitrag news:06e701c47528$a0a0c950$3a01280a@phx.gbl... > When I click on the "send - receive" button, a window > pops up saying "Operation Failed". Does my computer have > some kind of inf...

Operation Failed Error Message when Trying to Attach Encrypted File to Message
Outlook 2003 SP1 running on Win XP for Tablet PC. Tried with Word as the email editor and without, same result. Two FAT partitions, no encryption and one NTSF partition with encryption turned on (it contains all my documents). When I create a new email or reply to an email and try to attach a file to send as an attachment, if the file is encrypted, I receive the error message "The Operation Failed." If I unencrypt the file, attaching it works fine. Also if I right-click the encrypted file from My Computer and chose Send To - Mail recipient from the menu, it works fine too....