Outlook using imap is receiving but not sendingMessages are being put in Sent folder and Send/Receive shows no errors but
emails are not actually getting sent. This is a new install of Outlook on a
new computer. Have I messed up the setup?
"Theatre Girl" wrote in message
news:64BB711F-FE56-440C-A850-DADCA8C3BA00@microsoft.com...
> Messages are being put in Sent folder and Send/Receive shows no
> errors but
> emails are not actually getting sent. This is a new install of
> Outlook on a
> new computer. Have I messed up the setup?
IMAP is not a sending protocol. It is used for receiving mails (out
of your ...
Public Folders and Display of Mail AddressesHi,
Ex 2003 SP1.
I have created a public folder holding all the corporate contacts.
I want to allow users to select the contacts email address when
sending a message, however, on selecting the public folder from Select
Names/Show Names from/Public Folders after clicking To: no external
contacts are displayed.
I know that if you right click the PF and select this folder as an
Outlook Email Address book the the names are then displayed in the
selection dialogue box after clicking on the PF.
Surely there is a way to do this globally, to avoid all users in the
organisation having to configure...
Line charts using temperature and time factorsI want to create a line chart showing comparisons of heating and time. For
example one item is held @ 30deg for 10secs then 100degs for 30secs while the
comparison is plotted to show the difference. Help appreciated.
try x-y scatter chart data-columnwise.
Excelon_Ls <Excelon_Ls@discussions.microsoft.com> wrote in message
news:6B9F5547-A35C-4272-9FDC-F2CE6122D783@microsoft.com...
> I want to create a line chart showing comparisons of heating and time. For
> example one item is held @ 30deg for 10secs then 100degs for 30secs while
the
> comparison is plotted to show the diff...
E-Mail ReportI see alot of answers to E-Mailing a report, but I can't find anything to
send an E-Mail with the report data being in the body of the E'mail, I
don't want to send the report as an attachement. Can this be done?
Thanks
DS
...
HOW TO USE HYPERLINK within a droplist?I have a question aabout this:
eg.
I set row A with validation list "yes/no", i want that if choose "yes",
then open a word document named "checklist.doc".
Instead of using a validation list, you could use a "yes" button and a "no"
button. The yes button can be linked to a macro to open the word document.
The no button can be linked to a macro the will type the text "Go to next
step" or something like that.
"Bonny" wrote:
> I have a question aabout this:
> eg.
> I set row A with validation list "yes...
E-mail NameI am using Outlook 2000. When I press To: on a new e-
mail, the names for my contacts are first last. I would
like them to be last, first. I tried going into the
Tools, options, contact options, name and filing options
but it didn't work.
Help!
Find the properties of your Outlook Address Book service (method depends on
mode in which OL2k is installed - this can be found in help | about) and you
should be able to set the display defaults as "file as" rather than the
inane "first last".
Lisa wrote:
> I am using Outlook 2000. When I press To: on a new e-
> ...
using formsVista Home Premium 32 / Outlook 2007
I have created some forms that used to work. No more.
On selecting a form, I get "The form required to view this message
cannot be displayed. Contact the administrator. To my knowledge, I am
the administrator. This is a stand-alone PC in my residence. If I go
to Manage User Accounts, it shows only 2 accounts - LastName
Administrator and Guest.
I have googled my problem and found references to FRMCACHE.DAT which I
am told to delete and restart Outlook. Did that. Opened Outlook and
tried to open a form. Same error. And FRMCACHE.DAT was not ...
Using Spanish on PublisherI have copied and pasted a document in Spanish from Word
to Publisher. Prompts keep coming up telling me that it
cannot "hyphenate" this document. I'm guessing that it
means since it's in another language it needs something
to be able to spell-check, etc. I really don't care
about checking the spelling, but the pop-ups keep
interferring with my arranging the flyer I desperately
need to get completed. It tells me to put in the disk
and download the "hyphenate" feature. Can I download
this from the net since I have no disks. Publisher came
with my n...
Outlook 2007 Not Responding in Vista 12-30-09I have a Gateway notebook with Vista. I installed Office 2007 a month ago. It
all works well except Outlook. When I load Outlook MOST of the time I see the
send receive go to 56% then just sits at 56%. I get no email, then Outlook
goes kind of grey and I get " Not Responding" on the top bar. Sometimes I can
close Outlook and reload and it will get my email. I have searched the
knowledge base and have no programs trying to access Outlook.
This is apparently a known issue, is there a fix? Thanks for any help.
No its not a known issue, its down to your configeration
Have ...
I used Omsgclas.exe Utility and my contacts don't use then new formI created a new form for contacts. I followed the three
steps in the document How to Update Existing Items to Use
a New Custom Form. I can click on Action and do new
contact and the new form is used. I used Omsgclas.exe
utility to change the message class of the contacts. It
shows as changed. However, when I click on an old
contact (previous to changing the form), A message form
comes up (not the old contact form and not my new contact
form).
Anyone have any help how to get my new form pulled up for
old messages? Note: I had a form with a ' in the name,
I made a new form w...
PST Backup #3I downloaded and installed the Microsoft PST backup utility into
Outlook 2003, but the option dosn't appear on the file menu. If try to
re-install, it says the utility is already installed. Anyone know what
may have gone wrong?
"Toad" <ron@somercotes.net> wrote in message
news:1123657499.608786.210550@g47g2000cwa.googlegroups.com
> I downloaded and installed the Microsoft PST backup utility into
> Outlook 2003, but the option dosn't appear on the file menu. If try
> to re-install, it says the utility is already installed. Anyone know
> what may have gone...
Advanced E-mail optionsI can't find anything googling for this so can anybody point me at a help
source. When sending a message, if I select "Set Importance" or "Set
Sensitivity" from the "Advanced E-mail Options" dialog, what do the
categories mean and what do they do? For example what is the difference
between "Private" and "Confidential" and what different effects do they
have?
Thanks
--
(\__/)
(='.'=)
(")_(")
I'll answer 1/2 about the importance function.
If you set as High, the recipient gets a red exclamation mark in a c...
Exchange 2003 removing Internet Headers on incoming mailOur exchange 2003 server strips out the internet headers.
We have a catchall internet mailbox which is collected by exchange POP3 and
then forwarded to all internal mailboxes by virtual SMTP.
Is there a setting to prevent the headers being stripped out?
At first I though it was Outlook 2003, but I've enabled the DWORD registry
setting "SaveAllMIMENotJustHeaders" which shows only the internal receipt
into virtual SMTP and nothing else.
Regards
Anthony
On Tue, 13 Sep 2005 08:58:19 +0100, "Anthony Hunt" <ach@kl2.com>
wrote:
>Our exchange 2003 server ...
FormulaR1C1 using variablesI want to do this but can't:
ActiveCell.FormulaR1C1 = "=MyFunction(R[variable]C[variable])"
What are my options?
Try something like
ActiveCell.FormulaR1C1 = _
"=MyFunction(R" & CStr(variable) & "C" & CStr(variable) & ")"
Cordially,
Chip Pearson
Microsoft Most Valuable Professional,
Excel, 1998 - 2010
Pearson Software Consulting, LLC
www.cpearson.com
On Wed, 21 Apr 2010 13:52:01 -0700, Cheah
<Cheah@discussions.microsoft.com> wrote:
>I want to do this but can't:
>
>ActiveCell.Fo...
Using lookup formula using more than one cellI have a spreadsheet which lists clients by first name, last name, postcode
and phone number - all in separate columns e.g.
Andy Roberts M56 7HN 0161 428 3856
I have these all in one worksheets and in a named range called "Clients"
On a separate worksheet (within the same workbook) I log all my enquiries.
What I want to be able to do is type in to a cell the first name then in the
next cell the last name and the following cells get populated with postcode
and phone number based on BOTH of the first two cells by looking up the
"Clients" range.
I can get it...
Windows in taskbar #2The windows in taskbar box keeps getting "unchecked" while
working in different execel spreadsheets. I re-check it
and save/close the box, but it continues to happen. Any
ideas to correct this?
Richard
From a posting by Debra Dalgleish.............
There's some information in the following MSKB article:
OFF2000: Only One Icon Visible in Taskbar When "Windows in Taskbar"
Option Is Selected
http://support.microsoft.com/default.aspx?id=215816
and the following advice from Dave Peterson
'==========================
From: Dave Peterson (ec35720@msn.com)
Su...
Mail Delivery Error #3Hi,
I've been getting the following error through the exchange server:
Your message did not reach some or all of the intended recipients.
Subject: discount
Sent: 5/22/2006 4:02 PM
The following recipient(s) could not be reached:
email@addresshere.com on 5/22/2006 5:02 PM
A configuration error in the e-mail system caused the message to
bounce between two servers or to be forwarded between two recipients.
Contact your administrator.
< dms2.vps.net.au #5.4.6 SMTP; 554 5.4.6 Too many hops>
Background information: We host an Excha...
Using XML with ASP.NETI want to know where can I find Tutorials/Articles to learn implementing XML
with asp.net. I am working on ASP.NET using C# from last one month. I have
idea about XML but had not implemented yet with ASP.NET.
Thanks in advance.
Thanks
Vinod Jajoo
...
Compile error using CTypedPtrListHi,
I am having problems at compile time using the following
line:
CTypedPtrList<CPtrList, CString*> m_ClientList ;
When compiled I get the following errors:
emailcfgdlg.h(114) : error C2143: syntax error :
missing ';' before '<'
emailcfgdlg.h(114) : error C2501: 'CTypedPtrList' :
missing storage-class or type specifiers
emailcfgdlg.h(114) : error C2059: syntax error : '<'
emailcfgdlg.h(114) : error C2238: unexpected token(s)
preceding ';'
I am using the version 6 of the compiler with SP5.
Now I think this is something to do with the c...
Can't restore Outlook 2003 from the notification area (Windows XP Pro)If I minimise Outlook to the systray, and then attempt to restore it at a
later time I receive the following message in an XP balloon.
"Outlook is not responding. If you are using an Exchange server email
account you can cancel pending server requests by clicking the Outlook icon
in the notifications area and then clicking Cancel Server Request on the
shortcut menu. "
I am not using Exchange, therefore I don't have the option to cancel server
requests - this is a standalone system - it's not even networked!
How do I resolve this? I have to restart the system to get it ru...
Using secured OMAHi,
Please help me with my misunderstanding. When I try ro connect by t68i or
z600 (WAP 2.0) to OMA directly with SSL required, using mydomain.com/oma, of
course, I get 403 error. When I use https://mydomain.com/oma I get "Couldn't
reach the indicated web server." altough it works fine with Pocket PC.
What's wrong? What should I configure to establish secured connection from
mobile phone?
Best regards,
Vit Knyshevich.
"Vit Knyshevich" <abuse_vit_knysh@hotmail.com> wrote:
>Please help me with my misunderstanding. When I try ro connect by t68i or
>z60...
scatter plots using pivot table dataIn older versions of Excel, you could directly create xy
scatter plots using pivot table data. In Excel 2000, the
chart wizard says you can't use an xy scatter plot with
pivot table data. Why????? Is there any way around this
limitation?
Dan -
Don't tell the pivot table you're making a regular chart.
Select a cell away from the PT and start the chart wizard. Select the XY
Scatter type you want in step 1. In step 2, use the Series tab to select
the ranges for the names, X values, and Y values of each series in your
chart. Make sure you don't select one of the PT but...
Using resources, how to ?Hi guys,
I am using MS Visual Studio 2005 Express ( yes, the one that u can
download for free from MS website ) and I have a "little-big" problem
with my program. First of all let me say that I created a simple
console program, with his main and few functions, and I wish that my
..exe file can drop another .exe when launched.
The other exe is another compiled program, and I wish to handle it from
my main program as resource.
There are some topics about handling resources, but I cannot find
anything of good; I know how to use LoadResource, FindResource, etc,
but both fail since I am...
Allow temporarily use of right clickI have made a databse in which I have disabled the right-click option.
However, I have a form which opens reports, and I want to temporarily allow
(only for the opened report) the right click option so the user can save and
print the report.
I have also no clue how to create a custom menu with only a few of the normal
right-click options
I hope my question is clear.
Thanks
--
Message posted via http://www.accessmonster.com
"greeknl via AccessMonster.com" <u30909@uwe> wrote in message
news:71abb764263d9@uwe...
>I have made a databse in which I have disabled the right-c...
How to use interfacesHi ...
How can you show in an UML diagram using visio that you have 1 class who
uses the interface implementet by another ??
ex: C#
public class MyClass : ImyInterface
{
//some code
}
//And then in another class you will do something like:
private ImyInterface imi = new MyClass();
can you show this via UML shapes in Visio ??
thanks in advance ...
--
-------------------------------
Med Venlig Hilsen
Tonni Schm�cker
Tonni@cool.dk
...