I m receiving my email but after received it is not in my inbox
When I open the outlook and click on send/receive, I receive all the emails,
but I could not find the downloaded email anywhere. It's not in my inbox or
any of the folders that I have created. The unread mail also does not change
to reflect that new emails have arrived. Could some one help me out here.
Thanking you in advance.
If you check your whole folder tree (composed of multiple PSTs possibly),
are any folders showing as bold?
"INAVAB" <INAVAB@discussions.microsoft.com> wrote in message
> When I open...Word Attachments in outlook view 50% instead of "Normal" View
I am trying to help someone who is having an issue with Outlook and
word. What is happening, is that when she opens a Word attachment from
an outlook e-mail, the view area of the word document is defaulting to
50 percent. She then has to go to the view menu and hit the "normal"
option in order to read anything that's in the text. I will admit I am
a little bit baffled by why this is an issue, yet it doesn't seem to
want to go away.
Is there anyway to set the default view on an outlook/word attachment
so that it opens up in to "normal" view? It would ...attachments shown for all incoming mail
All of a sudden I am now showing all incoming mail with
an attachment when there actually is none. Any ideas?
...Pictures Received Are Garbled
I have been receiving emails with pictures from certain people, but the
pictures are shown as text. As if I had opened a jpeg with a text editor.
Not all pictures come in this way, only in emails from certain people.
How do I (or they) make it stop?
> I have been receiving emails with pictures from certain people, but the
> pictures are shown as text. As if I had opened a jpeg with a text editor.
> Not all pictures come in this way, only in emails from certain people.
> How do I (or they) make it stop?
Anti-...Problem with serial receive
I have a receive thread for a serial com port. I'm calling WaitCommEvent
with an overlapped structure to get events. The event mask is EV_BREAK |
EV_RXCHAR | EV_ERR. I also have an overlapped read operation to get receive
input. Both events are setup with auto-reset. The port works fine until I
get an error.
When an error occurs on the receive line the read event is signaled and the
call to GetOverlappedResult returns 995 Operation Aborted (the thread has
not exited). I then get a WaitCommEvent signal. I call ClearCommError()
which returns a CE_RXPARITY error. I thought ClearComm...Cant send or receive emails
I've done something to my settings, and cannot send or
receive emails. Can anyone tell me what to do? And I'm
not a newby either, shame shame! thanks. Kari
Error message? Version of Outlook? Type of mail account? Checked your mail
account settings already?
Robert Sparnaaij [MVP-Outlook]
Tips of the month:
-What do the Outlook Icons Mean?
-Create an Office 2003 CD slipstreamed with Service Pack 1
"Kari Jacob" <email@example.com> wrote in message
> I've done something to my...Time stamp of attachments are 2 hours ahead
I have am Time stamp problem with E-mail Attachments.
We have 2 pc with different OS WIN98nd and WIN2kprof. recently updated.
MSOffice2k-prof SP3 installed. (german versions)
When I open a E-mail with I can store the attachements with the function
"store attachments " (translated from german) in the "File" menue. The time
stamp in the
properties of the stored file ist 2 hours ahead. When I use Drag and drop to
store the file
the timestamp ist correct. Anyone an Idea to solve this little problem?
Thank you for your assistance.
...Receive email in real-time
We have several PCs in our company that are receiving Exchange email
messages in real-time, whereas others have to click Send/Receive within MS
Outlook to receive their email. How do I setup Exchange where all users can
receive their email instantaneously on any machine in the organization onto
which they logon.
Thanks in advance,
You can't configure Exchange to not deliver emails instantly to Outlook
This is an Outlook setting and will have to be configured here.
"Mervin Williams" <firstname.lastname@example.org> skrev i en meddelel...Pre-formatted E-mails for Attachments
We're using Outlook 2003.
If a user is in My Documents, right clicks on a Word Document (for
instance), chooses Send To, E-Mail, a preformatted E-mail appears on
Is there anyway we can change the Template for that E-mail?
John F Kappler, you wrote on Mon, 20 Feb 2006 17:10:44 GMT:
> We're using Outlook 2003.
> If a user is in My Documents, right clicks on a Word Document (for
> instance), chooses Send To, E-Mail, a preformatted E-mail appears on
> the screen.
> Is there anyway we can change the Template for that E-mail?
You can...Received Not Invoiced not = GL(205000-000-000 Received Not Invoic
I am working on some questions for an audit, and was asked why when we run an
RNI report [Reports>Purchasing>Analysis>Received/Not Invoiced] for a specific
date range, it doesn't match the [Summary Inquiry] numbers.
Shouldn't you be able to run a report that selects the RNI from the POP
tables for a specified date range and the GL20000 (acct code 20500-000-000)
for the same date range and come up with the same result.
I figured out the answer, never mind!
> I am working on some questions for an audit, and was asked why when we run an
> RN...unintended attachments
Sometimes recipients of my emails tell me that my
messages came with attachments that they cannot
open.....when in fact i sent no attachments. Can anybody
tell me how to fix this?
Please try to be more specific with your questions - the crystal ball is
having a well-deserved vacation. Outlook version is always appreciated as
well as the exact error message or the name of the attachment.
Are the attachments winmail.dat? If yes, you need to change your message
type from Outlook Rich Text to Plain Text (preferable) or HTML (less
preferable but still works.)
Milly Staples [MVP - O...Send & Receive button doesn't work
I installed Office XP and the SP3 service pack. I can't
get the "send and recieve" button to work in MS Outlook.
Everytime I click it I get a error message "The operation
failed. An object could not be found." I tried proposed
resolution in from MS knowledge base article 312354 but
it didn't fix the problem. Any suggestions on the fix?
i'd follow the procedure for creating a new profile again first. if that
fails, try a repair operation.
"Tom" <email@example.com> wrote in message
news:0b0d01c425ad$17305570$a401280a@...Can't open or save attachments from specific senders
I posted this earlier this week but it is not longer on
the board . . . ?
Using Outlook 2002 SP2:
I have two users in an office that cannot open RTF
attachemnts from a single particular outside sender.
They can open RTF attachments from all other senders.
I don't think the incoming attachments are corrupted or
infected with a virus because . . . these two users can
forward the message to other users in the office and those
users can open the message and the RTF attachment
This problem is showing up on few other (different)
machines but the problem attachmen...Send/Receive Operation Failed
I was receiving an "Operation Failed" message when
pressing the Send/Receive button.
I tried the trial of Office 2003, reverted back to Office
XP. After re-install of Office XP, Outlook resumed all
previous settings, however the Send/Receive function was
After some searching and experimenting, the solution was
found in Microsoft Knowledge Base Article - 284312.
After shutting Outlook down, finding the Outlook file
with the extension *.srs, renaming it to *.old, and
restarting Outlook, the Send/Receive function resumed
n...email stuck in outbox: receiving error message
My emails are stuck in my outbox. They do send to the
recepient, but never switch over to my sent box.
Go to the 'Tools' menu, then options. In the
first / 'Preferences' window that appears (tab shown at
the top) click on 'E-mail Options'. Make sure there's a
check mark in the box that says 'Save copies of messages
in Sent Items folder'.
If this is already done, you might want to note the exact
text of the error message and do a search in the
Microsoft Knowledge Base.
>My emails are stuck in my outbox. They do s...Forwarding mail received from a receive-only account to a send/receive account
I am trying to setup Outlook 2002 (SP3) to pop mail from one of my
accounts. This account (Account1)is receive-only, that is in the
Send/Receive group settings I have setup the account to "Receive mail
items" but not to "Send mail items".
I have existing rules that forward mail that I get from certain people,
and I have another account (Account2) which I have setup to send and
However, when I receive mail from Account1 that matches the rules, the
mail gets forwarded(sent) using Account1 even though the Send/Receive
group settings say the account is receive-only.
...Outlook freeze when click on attachment message
I am using Outlook 2003, every time I click on a message
that contains an attachment, the whole Outlook freezes.
Then when I restart after that, the send/receive doesn't
work. I have to restart the whole system to get Outlook
working properly again, but if I click on a message with
an attachment, same thing happens again.
I've tried reinstalling and it works the first time I run
Outlook then the same thing happens again.
Can anyone shed some light on how I could fix it?
I've had this problem for some time with Outlook 2002
and it developed after an update althou...Sending and receiving
I can receive e-mail but cannot send. I've checked my settings - they are the
same as Outlook, which I used on my old XP computer. This is a new Win 7
Copy and paste the entire error message for analysis please . ... .
"Railroad Henry (not John)" <RailroadHenrynotJohn@discussions.microsoft.com>
wrote in message news:120A3A4D-6860-46AC-A94E-C7CB0AB7AD34@microsoft.com...
> I can receive e-mail but cannot send. I've checked my settings - they are
> same as Outlook, which I used on my old XP computer. This is a new Win 7
> compu...Hiding Received Items on Purchase Orders
Is there a way to hide already received items on a PO? That is, can a revised
PO be printed that only shows remaining open items (backorders). On that same
note, is there a way to print out a "Receiver" or "Check-in Sheet" for my
staff to check in orders against, as opposed to the actual purchase order,
which shows more information than I'd like shown...
Thanks for any input!!
Hey all -
I work for a school district that is running Outlook
2000 SR-1 and an old version of Outlook Express. Every
time a user clicks on send/receive it times out and says
that server such and such can't be found.... But if we
close down that "error" box and click on send/receive
again it works. Every time! Anyone have an idea why
it "dies" on the 1st attempt and then is successful on
2nd? I can't see any setting in either version that
make this happen. Thanks.
...Emailing worksheet (not as an attachment)
I was able to email the current worksheet I was working on
(not as an attachment) and now when I try it states
"Excell could not start email program"
"check your network connection (which I don't have) and
make sure office is installed correctly, your email
program is setup correctly and you can connect to your
I am able to send the sheet as an attachment. I use a DSL
connection and I use Microsoft Outlook as my email. Any
ideas....recently I was having an online conflict and HP
tech was working with my config files..do you think this
had anyth...Preventing changes to received messages
Outlook allows me to modify a received message's body and subject field. So
if Bob sends me an email, I can open it, change the body's content, save it,
and it looks like that's how I received it. Then if I print or forward it,
it looks like Bob sent me something he in reality didn't.
Is there a way to disable that? Can the integrity of a received message be
protected? Can this be done without digital signitures?
I do not think that is possible !!! Sorry for that .
Hope this helps !!!
"Hall" <firstname.lastname@example.org> wrote in mes...Include this account when receiving mail or synchronizing
In OE I have the option to check mark "Include this account when receiving
mail or synchronizing".
Where does OL has this option?
Tools-> Options-> tab Mail Setup-> button Send/Receive...-> button Edit...
Robert Sparnaaij [MVP-Outlook]
Coauthor, Configuring Microsoft Outlook 2003
Outlook FAQ, HowTo, Downloads, Add-Ins and more
Real World Questions, Real World Answers
"AJS" <email@example.com> wrote in message
> ...unable to receive email from a certain user
I have a problem where I am not receiving email from a
certain user within our organization. I am able to receive
all other mail, from other users, but when this user sends
me mail.. I never get it. It shows as sent from the
sender, and I dont have any rules in place that would be
moving it from the inbox. Any thoughts?! Please help!!
is the user able to reply to mail sent 'from' you?
have they got the correct spelling of your name etc?
"Justin" <firstname.lastname@example.org> wrote in message
> I have a problem wh...Receiving emails ... or rather NOT receiving
I get to message #5 and won't download. I now have over 200 emails waiting to
be downloaded to my Inbox behind email #5. Anybody know how to remove this
#5 email that is blocking everything else?????
Logon to your mail server's Webmail page and delete the offending message
Imperial Beach, CA
"Lynda" <Lynda@discussions.microsoft.com> wrote in message
>I get to message #5 and won't download. I now have over 200 emails ...