boot up problem
As my computer was infected and Contol panel was not visible,in Safe
Mode I ran "SmitFraudfix" and AVG antivirus.Then ,I tried to bootup in
Normal Mode.But , after Login Screen only mouse pointer is visible and
no Desktop icon is visible.
> As my computer was infected and Control Panel was not visible in Safe
> Mode, I ran "SmitFraudfix" and AVG antivirus. Then I tried to boot up i=
> Normal Mode, but after Login Screen only mouse pointer is visible and
> no Desktop icon is visible.
> Please help...Dual Monitors
We are being told by our Business Partner that spreading GP across dual
monitors can cause issues. I have a hard time believing that a microsoft
product would have issues with this. Has anyone else experienced any
problems with dual monitors?
Microsoft SBF Specialist
3/5/2008 4:51:53 PM
C Dunn wrote:
> We are being told by our Business Partner that spreading GP across
> dual monitors can cause issues. I have a hard time believing that a
> microsoft product would have issues with this. Has anyone else
...Dual monitors, dual excels
I am trying to copy and paste from one excel to another. The reason i have
two seperate excels open is because i have dual monitors and that is the
only way i know how to get excel to show up on both screens. When i try to
paste it will only paste values and it will not paste the formulas. Also
when i try to paste special it does not give me the usual paste special
menu. How can I get around this problem?
If you open one instance of excel and arrange the windows nicely, you should be
I'd start with Chip Pearson's notes:
http://cpearson.com/excel/MultipleM...Exch 2003 Sp1 Install w/over a Gig of Ram
I am about to do the Sp1 install for Exch 2003 running on a 2003 server. In the relase notes there is a paragraph about what needs to be done if the server has over a Gig of Ram. Both my servers do, one has 2 Gig and the other almost 4 Gig. I understand what to do with the registry entries and I have located them to be sure. My question is about editing the boot.ini file. I'll paste teh part of the article here and my boot.ini below it. If anyone understands what to do with it please help. I'm schedules to do the patches tomorrow.
Here is the paragraph from the article:
Event...Dual Boot Dilema
I have a computer with space for only two hard drives. It was originally
built with Windows XP Pro (Disk 0). I added a drive (Disk 1) and loaded
Vista Ultimate on it and I do a dual boot routine as needed. At this point,
I'd like to install a new Disk 0 and build it as Windows 7 Pro. (I really
wish I could upgrade my Vista Ultimate to Win7 Pro) I guess my question is
this, if I put in a new Disk 0, boot to a DVD and build it to Win 7, what
will happen to my Disk 1? Will Windows still recognize that there are two
bootable drives and ask me which one to use? When I put a...reverse typing of names for tent cards
i need to do tent cards and want to print the person name on them on both
side when i fold the tent card so one side has to be printed reverse.
Art Wisener wrote:
> i need to do tent cards and want to print the person name on them on
> both side when i fold the tent card so one side has to be printed
I don't think you want the text reversed like a mirror image...
you just need to rotate the top text box by dragging the green
handle so it appears upside down....when the card is folded
all should be correct.
J. In...No safe mode options with F8 on dual os dell system
I have Dell computer which i purchased from Dell with XP and Vista
installed. It is currently set to XP.
It is working fine. I am, however, trying to run a utility for AVG on
it in Safe Mode and have found out that I am having a difficult time
arriving to the Safe Mode options.
Interestingly and, most frustrating, I have found out that Dell won't
support a Dual OS system even though they are the folks who sold it to
me that way brand new! The computer is only 5 months or so old.
I try hitting the F8 immediately upon start up and I arrive at the
"choose OS" me...Dual monitors
I have just started using two monitors and whatever I do, new mail messages
always open in the secondary monitor. I don't always want to have both
monitors on so how I do move the default back to the main monitor?
...PC not booting at all
I was having issues with a fatal error. I tried flushing the cmos,
and changing the boot sequence. I now have a problem in that the
computer is not starting up at all. It gets as far as displaying
X300XT BIOS P/N 113-A33437-102
and then just sits there. Does anyone have any suggestions?
albatross's Profile: http://forums.techarena.in/members/165078.htm
View this thread: http://forums.techarena.in/windows-xp-support/1285708.htm
From: "...my pc want boot from the hard drive, also my CDROM does not work
Someone please help!! My CDROM player got slower and slower then stopped
altogether, what makes matters worse is that when I 'boot up'/re-start etc I
am asked for a CD for boot up? I then have to press 'control/alt/delete' and
then the pc boots from the hard disk, I have been into the set up and the
'boot from' list always defaults to the 'CDROM' as the first boot device, I
keep changing it but it defaults back to the CDROM. I also have various
files missing and I am unable to install printers etc from internet driver
software downloads ie, I am a...Dual monitors
I know this is a perennial topic of discussion around here, but is
running multiple instances of Excel (using up multiples of the amount
of system resources Excel normally would) still the only way to get
Excel to run in two separate screens?
I finally upgraded to Office 2007 Ultimate today, and am somewhat
disappointed that MS still hasn't gotten around to implementing
multiple monitor support. I'd thought they might have given some
comments I'd read in blogs on the issue that apparently dual monitors
were supported in the second beta version.
Is there some serious technical re...Dual Displays
I want to connect my Sharp Aquos flat screen TV to my computer, and see my desktop on both the TV and computer monitor.
Windows Vista Home Premium.
HP Pavilion a1610n computer.
Galaxy GeForce 8400 GS graphics card, outputs: 1-VGA, 1-DVI, and 1-SVGA. There is no HDMI port on the card.
I connected a VGA cable between the motherboard "on-board" VGA port and the TV, figuring that I could use that output to work with the TV. The computer monitor is plugged into the GeForce graphics card.
Tried the Desktop "Display Setting". It says, the number 2 monitor is "N...Dual Processors and Macro Speed
I've just discovered this forum and I'm hoping that someone can hel
I'm running a rather sizeable macro which generates a lot o
I've already turned off screenupdating and optimised my code but it wa
still taking many hours to run.
I turned to new hardware to solve my problems........
I'm now running the macro on a dual 3.2ghz Xeon processor machine wit
4gb of RAM and XP professional.
It's about 20% quicker than my last machine which had a single pentiu
4 processor and 1 gb ram, but not the 200% quicker I had been promise
by our IT dept :(
...Write offs/adjustments/reversing an entry
How do you do write off's in money. I'm use to using quickbooks and it has an
area for adjustments write offs and so on. I can't seem to do negative
entries in money.
What are you trying to write off? The way I make an adjustment is by naming
the payee Adjustment and selecting what category I want the adjust to go to.
If you need to add to the balance of debt you do a create a charge(debit),
if you need to reduce the debt you create a deposit(credit). Let me know if
I'm so use to the old standards of accounting that sometimes I make ...OWA boots my clients out
I have a problem that I can find no information to resolve. I have
sucessfully setup SBS 2003. All patches have been applied to the O/S and to
Exchange 2003. However, when my clients use OWA they are able to log in, but
after about a minute of activity, they are kicked out with this message to
log back in, "Your session has expired. To continue your work, you must log
on again. Type your user name and password, and then click Log On."
I have checked the inactivity time to live and it is set at 90 minutes! I
am not using an ISA server on the box - just SBS 2003 Standard and...Dual mailboxes in GAL
2 sites, one organization, Ex5.5. The other site replaced
their server and in the process, my site/server now have a
few of the mailboxes in my GAL duplicated. The first of
each duplicate in nonfunctional (i beleive is a remnant of
the server in the other site that they replaced) and
incoming email for those people get sent back
undeliverable, because exchange uses the first mailbox in
the GAL not the second.
I have exported the GAL using directory export from the
tools menu, and opened csv file and deleted the dups.
Then when i try to import it back in, the "import
director...How to reverse the order of data in a single column in Excell?
Ie, if i have a set of 10 numbers in column A, how to copy the into column B
in reverse order?
In B1 put
and formula-drag that to B10
To formula-drag, select B1 and click on the small + in the bottom righ
corner of the selection, drag to B10
> Ie, if i have a set of 10 numbers in column A, how to copy the int
> column B
> in reverse order
Bryan Hessey's Profile: http://www.excelforum.com/member.php?action=getinfo&userid=2105
I'm printing a brochure on a laser printer with dual printing capabilities the size of my brochure is 11X17 divided in two panels (landscape). the formatting is identical as far as the size is concern in both sides, but when a print the printing guides don't match therefore when I fold the brochure my half marks for each side do not coincide. How can I fix this problem
I’m working on publisher 200
There are no known printing issues in any version of Publisher.
This will be an issue with the printer or printer driver.
Suggest you see if there is an updated printer driver o...xp no boot menu no key board option
My friend's parents have asked me to "fix their computer"
I think the only problem is: I need to re-install XP and drivers.
The only problem with that is I cannot get to the boot menu. On start
up, the screen goes blank and goes to the "megatrends" screen where it
tells you the status of your HD and stuff. I tried ps2 and usb keyboards
but i cannot get to the boot menu. Both keyboards I was using have led
lights but they never turn on I checked connections and all were
thanks for reading
-------------------------...Reverse Vlookup, List in Descending Order, [range_lookup] = TRUE
I have been trying to find this answer and having a little trouble.
Here is my example:
In Column A there are Dates in Descending order. In Column B are the
corresponding Fuel Percentages that we charge our customers on those
dates. An employee from my company will add the new date to the top
of the list if the Fuel Percentage has changed.
I have another workbook that needs to look at every day of the year
and pull the fuel average on that day. The problem is that when I do
a Vlookup =vlookup(Date,A:B,2,TRUE) the default logic is to look from
the top of the list down to the botto...Reversing HQ WS301 Set Item Sale Prices
One of my office folks ran a 301 for all items, setting the sale price to $0
with start/end dates of 12/31/1899. It's not really doing anything, but I'd
like to uncheck the 'Item is on sale' box for all of these items.
Is there a way to do this other than using a query? I was looking for an
anti-301 worksheet, but can't find one.
The worst words in business:
"We''ve always done it that way"
Stop Fishing for eMail.
...Reversing mouse movement with a mouse hook
I want to reverse the mouse movement using a systemwide mouse hook. For
example, if you move the mouse to the left, the cursor goes to the
I've got my mouse hook working, but I don't know of a good way to alter
the movement. I was trying to use SetCursorPos(x,y), but that sends my
CPU usage through the roof and bogs the whole system down to
What's the best way to alter the mouse movements?
Here's what I've got for my MouseProc. Even this simple code (which
does not alter the mouse movement) bogs the system down b/c of the call
to SetCursorPos...Dual Categories listing
Money used to hat the option for Dual Categories listing in the entries.
Where did it go??? I would very much like it back!
Change back to Money 2004
"DSJr" <DSJr@discussions.microsoft.com> escreveu na mensagem
> Money used to hat the option for Dual Categories listing in the entries.
> Where did it go??? I would very much like it back!
"DSJr" <DSJr@discussions.microsoft.com> wrote in message
news:34E95DA3-CC39-4FCC-8F9F-0DEC55D...boot from external drive
I would like my laptop to boot from an external drive until I can
replace the internal drive.
can you tell me how to boot from my external drive?
dreammaker's Profile: http://forums.techarena.in/members/239786.htm
View this thread: http://forums.techarena.in/xp-hardware/1350506.htm
> I would like my laptop to boot from an external drive until I can
> replace the internal drive.
> can you tell me how to boot from my external d...Dual screens
I have a pc with windows xp and powerpoint 2003 running dual screens. I am
able to view the presentation on screen 2 ok. But as soon as i click on
another program, the slide show stops until i click on powerpoint again.
we want to use the slide show at our reception to welcome guests etc, but
work on other programs at the sametime from one pc.
Look at PowerShow from http://officeone.mvps.org/powershow/powershow.html -
it allows you to use your primary monitor while the slide show runs on the
Zoom into slides during slide ...