Flash cards (Mail merge on 2 sided cards with multiple cards per s
I want to make a set of flash cards (3.5" x 2") with a term on one side and a
definition on the back side. I have all the terms and definitions in a
spreadsheet. I want to use sheets of tear apart business cards (10 cards per
8.5" x 11" sheet) Each sheet will create 10 flash cards with a unique term
on one side and definition on the back side.
I understand how to set up a mail merge but if I select “multiple COPIES per
sheet” the front and back of the cards are printed properly (definition and
the term match) but I get 10 copies of the same card per page. If I s...Flashing Label
I would like to make a label flash to remind the user to complete an
action. I know that it’s annoying and that it isn’t good for epilepsy people.
All of that aside I would like to have it flash when the on focus is on a
text box then when its off focus the flashing stops. Can someone please help
me accomplish this. Any help would be appreciative thanks.
Message posted via http://www.accessmonster.com
On Wed, 24 Feb 2010 16:20:34 GMT, Jesse via AccessMonster.com wrote:
> I would like to make a label flash to remind the user to complete an
> ...how do i print 2 xa5 pages on a4 sheet in publisher
How do I view and print 2 x A5 pages on an A4 landscape sheet showing page
All combinations to date failed
Are the two A5 pages going to be identical in content?
Setup your printer for A4, landscape
Setup your page, custom, width - 14.846cm, Height - 20.997cm
Mary Sauer MSFT MVP
"Dodger" <Dodger@discussions.microsoft.com> wrote in message
> How do I view and print 2 x A5 pages on an A4 landscape sheet showing page
>...Outlook 2002 closes 10 seconds after opening
I have not been able to find any solution to this yet and
it is very frustrating. I am running Outlook 2002 on a
WinXP laptop and today (after almost a year of working
fine) Outlook decides to shut down about 10 seconds after
I open it. No error message or anything else like that -
it just closes. I already "repaired" my Office
installation, but this did not solve the problem. I also
downloaded and installed every Office service pack and
fix that I thought could help. No luck. PLEASE HELP.
...Compare worksheets #2
I have two worksheets which lists codes. The first worksheet is update
manually with new codes and the second sheet has a macro that copys th
codes in the first and pastes them to the second. Sheet 2 then import
data from another source and creates a pivot table using the codes.
Sometimes the raw data imported to sheet 2 has codes that are not i
sheet 1 and need to be input manually.
Im trying to find a way to compare sheet 2 against sheet 1 and list th
codes in sheet 2 that are not in sheet 1.
For example - If the raw data in sheet 2 shows code DGX which is no
listed in sheet 1, i need it ...Remove Blank Pages 03-10-08
I have a report created on a query. After I get all the field on the report
and everything formatted, when I go to print preview, I have blank pages
between the pages that have the fields. For example, the report has 2 pages
that have fields and a blank page between the first and second, and a blank
page after the second, for a total of four pages. How can I reduce the blank
This is nearly always because the width of the report, or the width of its
controls are too wide for your paper.
Ensure that the width of your report in Design view is less than [the width
of your paper MINUS...stop macro from flashing sheets
I have a macro that refers to multiple sheets. As it goes along in the
process, the sheets flash on the screen. This has caused some of the users
discomfort. Is there a way to show only 1 sheet (user interface) or a blank
screen or a progress bar or hourglass or something so the flashing will not
Thank you for any help.
as usual, POST your code snippet for comments and suggestions. Probably you
need to quit selecting and/or suppress screen updating.
"frendabrenda1" <firstname.lastname@example.org...mortgage #2
...Migration from GP 8.0 to 9.0
We are working for clients who have their GP 8.0 installed with SQL Server
2000. Many customizations are done on it. Now, they like to upgrade from GP
8.0 to 9. Can i please know what are the things I should know to make the
migration and the customizations work again in GP 9?
If any documents are there, please furnish me.
Thanks in advance.
Go to Customer/PartnerSource and look in the Hot Topics section, there is
information there on doing the upgrade from 8.0 to 9.0
> We are working for clients who have their GP 8.0 installed with SQL Server
>...text boxes appear to be flashing on my form
I am building a form which has multiple tabs on in. In these tabs are
various sub-forms and text boxes for data gathering and reporting.
One of my tabs is a summary tab where I have a bunch of text boxes that link
to the different sub forms and gather the important pieces of information I
need for the summary tab. These text boxes would have a control sources
something like this: =Forms!MainForm!SubForm!txtSomeData
I have about 50 text boxes on my summary tab now and I've noticed some
interesting behaviours as the number of text boxes grows. I don't have any
codi..."Add Webreference" in VS2008 .NET 2.0 project won't generate dynamic code...
Today we tried adding a "Web Reference" to an existing project and while
Visual studio usually generates a dynamic url (e.g. read from the
Properties.Settings), today it wouldn't generate that statement in the
constructor of the service class.
Instead, whatever setting we tried, it generated the code for the static
behavior. It does generate the setting in Properties.Settings. It does
add the information to the app.config, it just won't ever generate the
code to actually use that config data.
Tried removing the service, tried updating the reference, tried re...How do I correctly sort a list of zip codes that has both 5-digit.
How do I correctly sort a list of zip codes that has both 5-digit zip codes
and nine-digit zip+4 codes?
Assume the zip codes populate cells A1:A100.
Use a helper column, say column B. In B1 enter the formula
and copy down to B100. Then sort A1:B100 by Column B and then Column A.
"email@example.com" <firstname.lastname@example.org@discussions.microsoft.com> wrote
in message news:B41E9C09-972F-443D-AF0A-64927EA797CB@microsoft.com...
> How do I correctly sort a list of zip codes that has both 5-digit zip
> and nine...CRM 1.0 Enhanced Crystal Report Installation Help Needed
When I try to install CRM 1.0 crystal report enhancement I got the
following message "Error 1713.Crystal Reports 8.5 Enhanced Edition for
Microsoft CRM (en) Cannot install one of itsrequired products". any
one can help please
> When I try to install CRM 1.0 crystal report enhancement I got the
> following message "Error 1713.Crystal Reports 8.5 Enhanced Edition for
> Microsoft CRM (en) Cannot install one of itsrequired products". any
> one can help please
This is a known issue
Error 1713 'Crystal Reports 8.5 Enhanced Edition for Microsoft...Undeliverable message #5
Can anyone tell me what the following bounced back message means and how to
Your message did not reach the following recipient(s):
John Doe on Tue, 10 May 2005 07:51:15 -0700
The content length of the message is too long for the recipient to
Would appreciate it.
On Tue, 10 May 2005 08:32:09 -0700, "Gavin"
>Can anyone tell me what the following bounced back message means and how to
>Your message did not reach the following recipient(s):
>John D...Update Problem 05-30-10
I having a problem after Updates coming up with Error Code : 0x643 ... help.
When installing updates using Windows update or Microsoft Update you may
receive Error 0x643 or 0x80070643
> I having a problem after Updates coming up with Error Code : 0x643 ... help.
> When installing updates using Wi...Exchange replicating only 1 way...
i have 2 exchange servers and it only replicates 1 way
What do you mean it only replicates one way? Do you mean public folder
replication? If so see if this helps:
"BDog" <BDog@discussions.microsoft.com> wrote in message
>i have 2 exchange servers and it only replicates 1 way
...Backup pst #2
I have unistalled pfbackup (I thought)and wanted to
reinstall it. However the installation detects a previous
installation and suggests unistalling it by clicking "OK".
It then gives a dialogue saying it will have to be
unistalled from windows Add/Remove programs in the
Control Panel, but it isn't there either.
Any clues out there to help me?
I know how to use the sort feature in excel XP and have a macro to sort data
but is there anyway I can sort the data using a button/hyperlink/cell on the
As an aside, does anyone know why I can't see the posts I make to the group
but I can see all the replies?
Just drag a button from the forms toolbar onto the worksheet and assign your
macro to it.
Don't know the answer to the second I am afraid.
(remove nothere from the email address if mailing direct)
"elwyn" <email@example.com> wrote in message
n...GP 10 and GPConnNet on Citrix XenApp
I am testing the Dynamics GP 10 SP3 client in a Citrx XenApp 5 environment
installed on Windows 2008 Server. SQL Server 2008 is on a Windows 2003
server, 64-bit. I can log into GP and all runs well: core, 3rd party
products, plus our customized forms and reports.
We also launch VS 2005 VB apps from within GP. These apps use GPConnNet to
get the connection string. Here’s my problem: in this test environment, when
such a VB app is launched, I get this error message “Could not load file or
assembly GPConnNet, Version=10.0.0.0, … etc … or one of its dependencies. An
attempt w...2 Forms and 2 tables
there are 2 forms (main & sub)
when i make a new record in main form,
the new record is not yet saved / created in table
then i click the sub form button (by macro - openform) for creating
sub-record of this new record.
but there is error cos the new record (main form) has not been created and
so the sub record cannot be created too.
how should i do?
i do not find save macro command so that i can save the main form record
before creating subform record.
Thanks a lot.
The macro Action to save the record is RunCommand/SaveRecord.
But I would normally expect that t...VCF Files #2
When I try to export a Contact's info to a VCF file the notes section does
not appear. I am running Outlook 2003.
Known problem. SP1 fixes the export, but the problem with missing notes when
you open a .vcf file remains.
Sue Mosher, Outlook MVP
Microsoft Outlook Programming - Jumpstart for
Administrators, Power Users, and Developers
"Maynard James Keenan" <Maynard James Keenan@discussions.microsoft.com>
wrote in message news:36E84589-7231-4334-9524-0D2BF8AB4B07@microsoft.com...
> When I try to ...Message Headers #2
Is it possible to enable message headers for email sent between
mailboxes on the same mailbox store, in Exchange 2003?
> Is it possible to enable message headers for email sent between
> mailboxes on the same mailbox store, in Exchange 2003?
I do not think so. What is the goal?
If my message is helpful, please help me by registering at
http://www.openoffice.org/servlets/Join and voting for the following issues:
...Windows Explorer stopped working 02-24-10
Hi I have recently bought an HP Pavillion with Vista home premium.
Suddenly out of nowhere I have this infuriating problem of the "Windows
Explorer not working" error message. It attempts to restart and reloads the
whole desktop. It is persistent and loops back as soon as closed out, making
the machine virtually unusable
I have virus checked and spyware checked and restored from recovery drive D,
and tried all the "Cures" on the forums (usually postings from 2007 or
2008 - no recent postings - am I the only one with the problem? )
I suppose I can get Vist...Formula problem #10
I'm using excel to just added to columns. I don't know the values of the
coulmns yet but obviously i know the formula. How do i input the formula
without the result showing as zero before the data has been input.
Tools/Options/View; deselect "Zero Values"
"David" <David@discussions.microsoft.com> wrote in message
> I'm using excel to just added to columns. I don't know the values of the
> coulmns yet but obviously i know the formula. How do i input the formula
> without the result...