Loosing some colors when copy/pasting from/to Visio
I have seen the following problem numerous times:
Problem: I create a Visio diagram and when I copy/paste the diagram
into another MS Office product, like Word, Powerpoint, or Excel, I
loose some of the colors.n
In fact, I just ran into this when copying a visio drawing from one
Visio file to another Visio file. Note that copying from one page
to another page within the same Visio file did not loose the colors.
Some quesitons I have are:
(Q) Why does this happen and what I can do (if anything) to prevent it
(Q) How does visio, powerpoint, or word stores th...Excel : Saving and Mailing Question
A few questions I hope you can help me with (please) :
1. Is it possible to save a particular worksheet under a set name t
one destination and the rest of the workbook to another, through
macro/click of a button?
2. Is it possible to do the same but through email?
Message posted from http://www.ExcelForum.com
Ron de Bruin has lots of code examples at:
He also has an addin that may do almost what you want.
(on that same web page)
"ajw150 <" wrote:
> A few questions I hope you can help me wi...QUESTION ABOUT DISABLING A BUTTON ON A FORM
I have 2 checkbox on a form and a button. The button is disabled when the
form is loaded and enabled when either of the checkboxes is checked. What I
want to do is set things up such that when the checkboxes are both unchecked,
the button is disabled. I tried the On Current event of the form, see below,
but that didn't work.
Private Sub Form_Current()
If Me.chkFilterBy.Value = False And Me.chkTimeRange.Value = False Then
Me.cmdFilter.Enabled = True
Me.cmdFilter.Enabled = False
Private Sub Form_Load()
M...synchiing two computers?
Is there a way to synch Outlook on two computers?
I end up with some email on my laptop and some on my desktop - it would be
nice if the two could be synched so that I could have all of my email on
Take a look here, it may help:
Milly Staples [MVP - Outlook]
Post all replies to the group to keep the discussion intact. All
unsolicited mail sent to my personal account will be deleted without
After furious head scratching, Bill Andersen asked:
| Is there a way to synch Outlook on two computers?
| I end up with some...EN_UPDATE usability question
What would a reasonable upper limit in time spent responding to the
EN_UPDATE notification? If its too long the UI would be lagged and that
would be an annoyance to the end user. Is this in any official MS style
Personally I would assume maybe .25 seconds however this is for an official
document so I need to be able to back up a value with some officialness such
as MS recommendation.
You might want to do a Google search, this is a well-researched topic, and I
imagine you'll find quite a few studies. For web usability, there has been
lots of work, at least, and as...Compare two cells in two different files and return answer
I am attempting to compare two text cells and if they both exist, I want to
bring in a "yes" answer. If they don't, bring in a "no" answer. Here's an
example of text.
Col A Col B
Col A Col B
So, what I want to do is say in File 1 take cells A1 and B1 compare them to
File 2 and search Col A and Col B and if there is an exact mat...Few questions about VB
1. How can I do number for example 812 from 812,033217 ?
I try to do like this but it did not work
Dim first as double
Dim second as intiger
firs = 812,033217
second = first
first = second
but still firs = 812,033217 :confused:
2. How can I open not .xls file from VB code wrote in Excel file
I want to open Solid Works file "example.SLDPRT" in Solid Works o
thx for any suggestio
Message posted from http://www.ExcelForum.com
1. one way: use CInt. e.g.
second = CInt(first)
>1. How can I do number for example 812 from 812,03321...if- then question
Is it possible to compare two rows and then based on the value, assign
a character to occupy and adjacent column in the same row.
For example, I want to compare all of the numbers in column B, with th
numbers in column D, if B is greater than D, I want to put the lette
"W" in the adjacent column (in the same row). If B is less than D,
want to put the letter "L" in the adjacent column.
Is this possible
Message posted from http://www.ExcelForum.com
enter the following in the adjacent row (lets say in column E, cell E1)
=IF(B1>D1,"W",IF(B1<D1,"...Pivot table for two different data variables
I have the following table
Name type Cost overhead
amy C1 23 12
bob C2 129 17
cat C2 36 45
doo C2 100 32
I owuld like to create a pivot table that looks similar to:
the standard pivot table. (Please ignore type for now.)
name Data Total
amy Sum of overhead 200
Sum of cost 12
bob Sum of overhead 130
Sum of cost 23
cat Sum of overhead 90
Sum of cost 19
doo Sum of overhead 87
Sum of cost 34
Total Sum of overhead 507
Total Sum of cost 88
But with overall total (overhead + cost) for ...Exmerge Question #5
1. Seems like this should work no problem. If a user mailbox was deleted
using Exchange Tasks (but not the user) and I was able to restore the mail
store to a RSG, shouldn't I use Exmerge to pull the data out of the RSG and
put it all back into the original account (of course assuming that I've
created an empty mailbox for the user)? It seems for whatever reason Exmerge
isn't able to see the database after the mailbox has been removed and a new
one created on the account.
2. Should the above situation work if it's a whole new user created where
the o...Mouse event question
Does anybody know if is there an event triggered in the CWnd class when a
mouse "enters" that class, I mean, for example, when the mouse moves out
from a view, or returns to a mainframe from the desktop? So far, the only
workaround I've found is to use the OnSetCursor event to signal the position
of the mouse, but this is not the optimal, since is triggered each time the
mouse moves, making the application slow, and, as I said, I only need a
signal that tells me when the mouse leaves one window and enter to another.
Thanks a lot for your attention.
OnMouseMove is what you nee...5.5 to 2003 migration question
I currently have Win2003 Active Directory in a single domain running.
Exchange 5.5 on a Windows NT box is the last remaining WinNT box on the
If I put a test Win2003 server and do all the forestpreps, domainpreps and
run the ADC and install a test copy of Exchange 2003 and I use one test
mailbox on the 5.5 to move it, will this prevent me from moving the rest of
the mailboxes and database to another Exchange setup that will be permanent
Um...it depends by what you mean when you say 'another Exchange setup'.
You should approach the Forest prep and domain prep...COUNTIF (?) on two criteria
I have a spreadsheet that logs work activities and records team
members' completion of project units.
Column B records team member names. Column C has project unit status -
'pending', 'beta' or 'completed'.
It's easy to set up a formula to count how many units are allocated to
each team member - =COUNTIF(B1:B1000,"Joe"). But what I need to do is
set up formulas to count how many units Joe has completed, or has
pending or at beta, and this means assessing data in both columns -
which COUNTIF won't do.
This doesn't strike me as an especially...access 97/2000 question
If an access 97 back end database containing only tables is accessed by an
access 2000 front end, is there a danger or possibility that the tables will
be no longer accessable by access 97 front ends?
If the 2000 front end just contains linked tables pointing to the 97
back end, no worries. But if someone using 2000 opens and converts the
back end mdb itself, you're obviously hosed.
On Wed, 25 Feb 2004 20:11:00 -1000, "Alan" <email@example.com> wrote:
>If an access 97 back end database containing only tables is accessed by an
>access 2000 front end, is...viewing questions
Is there a way to sort the questions by date. I cannot figure out how the
questions are ordered. It's not by date, it's not by alpha, it's not by
popular - there appears to be no rhyme or reason to it.
If you access the forum directly from the server
http://www.gmayor.com/MSNews.htm you can sort them in any way you like.
<>>< ><<> ><<> <>>< ><<> <>>< <>><<>
Graham Mayor - Word MVP
My web site www.gmayor.com
Word MVP web site http://word.mvps.org
<>>< >...A CString question
Hi to all,
Given the following member function:
CString MyClass::MakeString(BYTE *pBuf, int len)
- 'pBuf' is a buffer that contains letters (a-z). It does not contain a
- 'len' is the number of letters in 'pBuf'.
What would be the best way to return a CString object that contains the same
letters in 'pBuf'.
I appreciate any suggestions.
You can create a new CString using the constructor with CString(pointer,len)
so why not just do:
You ...question about CStringT::Tokenize
I try to split a string "First,,Third" with ",". I suppose the result is
"First", "", and "Third". But why it is "First","Third".(A empty string has
BTW, how about ",First,Second,Third" and "First,Second,Third,"
If CString::Tokenize cannot support it directly, any other way can do it
CString str( "First,,Third" );
int curPos= 0;
CString strSplitter( "," );
while (resToken != &...Two IF Statements with two answers
In cell J9 I need a formula that would do the following:
If G9="Yes" then F9, If G9="No" then -f9
Note: G9 has a drop down list with Yes, No answers.
If there are no other alternatives that yes and no
> In cell J9 I need a formula that would do the following:
> If G9="Yes" then F9, If G9="No" then -f9
> Note: G9 has a drop down list with Yes, No answers.
=IF(G9=&qu...A question for the guro
How do I select a node that has both namespace and is prefixed?
<a:b> (and also in the default namespace!)
Ayende Rahien wrote:
> How do I select a node that has both namespace and is prefixed?
> <a:b> (and also in the default namespace!)
How exactly depends on the API you are using, but in general such
selection requires additional information about which namespcae URI "a"
prefix is bound to. In MSXML it's done via SelectionNamespaces property,
in .NET - via XmlNamespaceManager class.
Positioning the Vertical axes:
I have a chart where there are two axes. The first implementation produced
the two scales on the right side, one inside, the other outside the chart
area. Unusual, but luckily it fits well the chart.
I tried to duplicate the feat with another dataset (similar in structure)
and did not even get the second scale to show right, left or center (data
plotted with two different scales allright).
Where is the info to control these functionalities?
On Wed, 29 Oct 2003 17:48:13 +0100, pl.carry <firstname.lastname@example.org> wrote=
> Positioning the Vertic...TreeView XML Question
I have different pages in ASP.NET.And i have a treeview that
populates XML that i use as the MENU.
Is it possible to have one asp.net page but populating different XML to the
...plot two groups of numbers on one series of xy coordinates.
how to create a plot from separate x and y values. i.e. y values do not
correspond to the same set of x values. example x1= 5, y1=10; x2= 8, y2=15
I can read your question 2 ways;
A) you data looks like this
Select the data and make an XY chart
B) you have two sets of data
Make an XY chart of the first data series
Select all the data (including headers) for second set, and use Copy
Click the chart to activate it
Use Edit | Paste Special .... indicate New Ser...two variables
I have a query that asks for collcode, collcode2 and booth. On any given day
an employee may be collcode or collcode2. I would like to know how many
times a certain emp has been paired with another employee. So how do I ask
if an employee has been collcode/collcode2 and who the other person was? I
hope this question makes sense.
Thanks for any help
SELECT CollCode, CollCode2, Booth
SELECT CollCode2, CollCode, Booth
SELECT CollCode, CollCode2, Count(CollCode) AS TIMESPAIRED
GROUP BY CollCode, CollCode2
IF y...Find two PCI instance but load Init() one time
I'm developing a stream interface driver for my PCI device under WinCE 6.0
and this driver works very well currently. Now, I got a problem when testing
two the same PCI devices with my stream driver.
The registry can find two PCI instances (i.e. PCI\Instance\mydrv1, PCI\
Instance\mydrv2) but system only call my XXX_init() one time. Does anyone
know what the problem is?
The following information is my registry setting:
"Dll"="myd...Copy selected columns from .xls to a .txt file question
I would like to be able to copy two columns from a .xls file, columns 2
(B) and 9(I) into a .txt file for approximately 100 rows, using VBA.
What is the best way to do this?
.DisplayAlerts =3D False
.ScreenUpdating =3D False
FpatH =3D "C:\Documents and Settings\username\filename.xls"
FileP =3D ActiveWorkbook.path
ActiveWorkbook.SaveAs Filename:=3D _
FileP & "\" & "1.txt&...