Calling Dex Procedures from SQL
Is there any way to call dex procs from SQL or VB code?
There is an undocumented and unsupported method of calling Dex code from
VBA. However, I know of no method of calling Dexterity from SQL.
Please email me if you want an example, just remove the online. from the
David Musgrave [MSFT]
Senior Development Consultant
MBS Services - Asia Pacific
Microsoft Business Solutions
Any views contained within are my personal views and
not necessarily Microsoft Business Solutions policy.
This p...is SQL 2000 architecture different SQL Server 2005 / 2008 architecture?
Hi I have a book "inside SQL Server 2000" by Kalen Delaney, which I
have been told is a good book. I am going backwards... reading about
the sql server architecture in chapter 3 of the book.
As I'm reading... I was wondering is it different SQL Server 2000 vs
SQL Server 2005/2008? Also
where can I find a book/or link that can give me more details about
the internals on architecture?
norm (firstname.lastname@example.org) writes:
> Hi I have a book "inside SQL Server 2000" by Kalen Delaney, which I
> have been told is a good book. I am g...Moving customizations from SQL 2k to SQL 2k5 CRM
This may be a non-issue but I wanted to check to see if anyone has done this
and ran into issues.
I have the XML customization files from our previous install of CRM 3.0 with
SQL 2k database. I now want to import and publish these same customizations
to CRM 3.0 on SQL 2k5.
Has anyone done this or can point me to documentation that tells about the
success or issues for doing this?
On 7 Feb., 06:35, Chris Treanor
> This may be a non-issue but I wanted to check to see if anyone has done this
> and ran into issues.
&...Cannot install the 3rd Exchange 2003 Server
Please help me. I cannot install the 3rd exchange Server 2003 on windows
server 2003 Std with SP1 and without SP1. My AD is Server 2003 with SP1. The
other 2 Exchange Server is 2003 std with SP2.
During installing a new Exchange computer into the organization, I receive
the following error message:
Setup failed while installing sub-component Site Replication Service with
error code 0xC007054B (please consult the installation logs for a detailed
description). You may cancel the installation or try the failed step again.
And the log is have the following error:
[19:50:13] DS or RPC is b...CRM 3.0 Install Error with SQL Reporting Services and SQL 2005
Doing a CRM 3.0 Server installation. During the last page of the install
wizard (or what I assume is the last page) when I goes through and does
verification I get a red X next to SQL Reporting Services. The message I
receive when I look at the details is:
The specified path is not a metabase path.
Parameter name: path
Now SRS is installed and working. I put in the URL:
http://<servername>/reportserver and every other variation on that I can
also assuming you did not use ssl...
=======================...SQL 'for xml' and C# example??
I'm missing some piece of the puzzle. I'm using 'for xml' type queries from
SQL2K - and now trying to change the front-end from ADO to C#, I can't quite
figure it out..
It seems that I could use an XmlReader.. and somehow use that instead of a
DataReader.. but that didn't work.. I tried using a DataReader and get the
byte array - but that wasn't right.
SQL returns formatted XML, I need to load that XML into an XmlDocument
somehow without ANY molestation of that dom. Any ideas? Examples? Missing
THANKS!! I've been looking for the answer to ...sql summarizing help
id, cdate, weeksago, amount, typeid, timeclose
496, 2010-02-11, 0, 450, 3, 1
490, 2010-02-01, 1, 200, 4, 1
491, 2010-02-01, 1, 350, 2, 2
493, 2010-02-01, 1, 500, 5, 1
489, 2010-01-21, 3, 150, 2, 1
136, 2010-01-12, 4, 500, 3, 2
137, 2010-01-12, 4, 100, 3, 1
138, 2010-01-12, 4, 500, 2, 1
1. i'm trying to create a sql that will give me a summary resultset grouped
2. i want to sum the columns and get counts based on typeid.
3. avg of timeclose
here's the sql i have:
, (sum(timeClose)/(count(timeclo...Update multivalue field in table from form with SQL
Access 2007 on Vista
I am using a form to establish the variables for a report before it is
created. One field on the underlying table is a multivalue field, and the
form includes a multi-select combo box control. After selections are made and
the OK button on the multi-select combo drop down is clicked, focus moves to
the next control. I have discovered though, that the underlying table does
not update immediately, but does so correctly when I close the form. This
sequence does not deliver the proper report data, so I need a way to
immediately update the underlying table (m...Project Server Cube Build Issue
I think I screwed up the install order on the SQL DMO components. According
" At this time, do not use the feature packs for SQL Server 2008 to install
and download these components, as those files will not allow you to build
cubes in SQL Server 2008 Analysis Services with Project Server 2007."
However, I didn't read that carefully enough and installed the Microsoft SQL
Server 2008 Management Objects Collection instead of the 2005 version. Now I
can't install the 2005 version even if I uninstall the 2008 version. The
setup fails with the "highe...Refer to SQL statements globally
I have two large SQL statements that I need to use across several
forms, reports, etc.
Rather than repeat them in each form, I'm trying to store and
reference them globally.
For example, I'd like to store strSQL1 and strSQL2 in a global module,
so I can use either like this in a form:
Me!lstResults.RowSource = strSQL1
Me.Report.RecordSource = strSQL2
Would I just store the SQL statements in a global module like:
Public Function SQLSource() As String
Dim strSQL1 As String
Dim strSQL2 As String
strSQL1 = "SELECT blah blah...To SQL or not to SQL?
I have a very vertical product developed 100% in M/S Access. I developed it
myself in 1993 in the initial release of Access and been with it ever since.
It is currently very stable and running in Access 2003. My big question is
how or even *if* we should move it to SQL. My customers are getting bigger
all the time with more users. Typically our customers run one or two
workstations generally never more than 5. Performance, however, is starting
to slow with database sizes passing 500 meg. We also have a LOT of code
behind forms so are bound tightly to the Access development environ...writeback to SQL 2005
hello! I use excel 2007
iI open a connection agianst SQL server 2005 and choose a table. In my
workbook i can now see this data from this table. if i change a value in some
cell i wish to writeback to table in SQL server. Is this possible?
It's possible through the use of VBA and ADO, but not simply using the data
connection you've already established.
"CJ" <CJ@discussions.microsoft.com> wrote in message
> hello! I use excel 2007
> iI open a connection agianst SQL server 2005 and choose a table...Payees in 2005 Business
When you change account or address information is another Payee created in
Money? My gas company is listed under Payees and I have auto bill pay setup
for them. However when I look up what has been paid to that payee it only
goes back to March of this year! When I look up the category it goes back
much further, so when I looked up the Payee for before March, the same Payee
showed up but some information is different (and not greyed out like for my
BTW... this is affecting Budgets as well when I look at my budget history. :)
Working in a large office we have recently replaced our
The new server has a different name fom the old one.
For the vast majority of users this has not caused a
One user about once a week cannot open hois Outlook and
the server name reverts back to the old server name.
Please help !
...2005 Update failed
I have the 2005 Money trial version, I downloaded the update, but it failed
to install. I cannot open Money with my current money.mny file, only a newly
The error is:
A communication error occured. Please try your call again. If you cantinue
to have problems call your financial institution's Online Services Customer
Thanks for the help
In microsoft.public.money, Frank wrote:
>I have the 2005 Money trial version, I downloaded the update, but it failed
>to install. I cannot open Money with my current money.mny file, only a ne...Project Server 2007 Hotfix dated 2/23/10
Need help in trying to determine what is actually being fixed in the newest
hotfix they are the following first and second items in the kb article.
Also, could someone let me know what the note applies to as well (that is the
first item or the second item or both). Thanks!!!!
1. You accept updates for assignments in Microsoft Office Project 2007. In
this case, the values for actual work and for actual overtime work differ
from the values submitted by the resources. When you save and then publish
the project, the resource timesheet on the My Tasks page shows the same
incorrect...Can someone tell me some newsgroup server about AI or datamining?
I am sorry to post my question here, but i really need help from everyone
here. I have googled for newsgroup talking about AI or dataming for a long
time, however, it ends no result.
Can someone show me any newsgroup servers just like msnews.microsoft.com,
then I would post my question there and gather helps from those experts.
there are endless resources in the internet, you just have
to look for the right words and places:
http://en.wikipedia.org/wiki/Artif...Outlook access to mail servers blocked
For last two days I suddently been unable to down load any email via
either my talk tal broadband or my vodaphone mobile connection the
message i get is the same across 5 different POP3 servers Receiving'
reported error (0x80042108) : 'Outlook is unable to connect to your
incoming (POP3) e-mail server. If you continue to receive this message,
contact your server administrator or Internet service provider (ISP).'
past post suggest the firewalls but had tried disabling them and its
still the same - i know there is mail as i have it on my balckberry
account - any ideas folks?
I am r...Running server reporting errors
Anyone seen this before - taken from the application log on an SBS 2003
server. Server does recover from this but this seems to be happening
A process serving application pool 'CRMAppPool' terminated unexpectedly
Appreciate any help or pointers.
After moveing to v3 mine did this too... and recovered.. after
> Anyone seen this before - taken from the application log on an SBS 2003
> server. Server does recover from this but this seems to be happening
> A process serving application po...PostgreSQL or other SQL servers in RMS
Has anyone successfully implemented RMS with one of the free SQL servers?
Theoretically, is there any reason why we have to use MS SQL Server 2000 for
"dh" <email@example.com> ha scritto nel messaggio
> Has anyone successfully implemented RMS with one of the free SQL servers?
> Theoretically, is there any reason why we have to use MS SQL Server 2000
> large databases?
RMS has implemented only for MS SQL Server (2000/MSDE) and isn't possible to
work with ano...Outlook without Exchange Server
I am new to outlook. I am trying to find out if Outlook
2003 can be used with pier-to-pier sertup in a small
office with leass than 5 employees. The functionality
desired would be to be able to forward and recieve
messages, tasks, appointments, share and view calendar
I was wondering if outlook can be used within a workgroup
in a LAN setup without having exchange server.
Athiff <firstname.lastname@example.org> wrote:
|| I am new to outlook. I am trying to find out if Outlook
|| 2003 can be used with pier-...Management Studio
I have both a named instance of SQL Server 2008 and Express 2008 installed.
When I try to connect with Management Studio, neither of those instances
appears in the list of local servers. But I can see them in the list of
network servers. In Local, I can see Integration Services only. Under the
Network Servers tab, I see my server with the two database engines listed.
In both cases, I have protocols Shared Memory, Named Pipes, and TCP/IP
enabled, and VIA disabled. Is that the way it should be?
I checked HideInstance in the Configuration Manager and it is set to No for
both ins...sql.request #2
Does anyone have a comprehensible guide on how to use it that a dolt like me
can follow? Every time I try I get a #N/A.
The only guide I can find is at
http://www.bygsoftware.com/examples/zipfiles/UsingSqlRequest.zip but it's
really hard to follow.
From the MSDN Library:
Not sure how familiar you are with ODBC; but if you are getting #N/A as a
result, it is usually because of problems either with the SQL syntax or the
connection string. There are a few examples of connection strings in the
re...I did a reset account of a computer account in AD which is an exchange server
How can I get the exchange to talk back to the AD again ...
...MSDE or SQL Personal or SQL Developer? or SQL Workstation?
Hi, which one is better for personal non-server computer? MSDE? SQL Personal?
SQL Developer? SQL Workstation?
It depends on what edition of GP you are going to run. If you are going to
use Professional, you need to go with SQL Server developer, assuming you are
installing on a non-server OS.
> Hi, which one is better for personal non-server computer? MSDE? SQL Personal?
> SQL Developer? SQL Workstation?
> Thank you.
Is the function of SQL Developer the same as Enterprise edition?
How about personal edition? Can it be used for GP Pro?