Exchange 2000 disaster recovery #3
This is a mess!
My Domain Controller/Exchange Server experienced a fatal error.
Drive D had some sector errors but is now functioning. This is where
Exchange was installed. This error caused Drive M to "dispapear".
At this point Exchange Manager says the Exchange Server cannot be contacted
although all the automatic services are started.
Drive D seems to have the data store files (hopefully in tact).
I've now created a new machine in a new domain with a fresh install of
Exchange 2000. I want to "recover" the data from the original Exchange 2000
server (rememeber th...I cant see pictures inserted into word/publisher
On reopening the files I can't see pictures inserted in Word or Publisher.
I'd suggest start by updating your graphics driver.
MVP Microsoft [Publisher]
"Ahsan" <Ahsan@discussions.microsoft.com> wrote in message
> On reopening the files I can't see pictures inserted in Word or Publisher.
...Publishing to the web through Publisher
i've just downloaded a trial version of publisher and love it so far except
it will not publish to my hosting provider, Godaddy.com.
I have completed all of the steps required per directions found at:
Everything is great until I get to the end when I get this message:
Publisher could not save the file to the web. Check your your url or network
connection and try again.
If there is any advice or technical support that someone can give please let
me know. I would love to purchase this product but I don't want to sp...publisher #74
can I repeat an image in publisher? like a line every 1/4 inch for example.
MVP Microsoft [Publisher]
Tech Editor for "Microsoft Publisher 2007 For Dummies"
"MargaretK" <MargaretK@discussions.microsoft.com> wrote in message
> can I repeat an image in publisher? like a line every 1/4 inch for
Copy the line, place your cursor where you would like the line to paste,
right-click, paste. It could be helpful to create guides. Or select the line,
press...Installing Publisher 2003 gives an error
I am trying to install Publisher 2003. Even before it comes up with the
Product Key, it gives the message "This patch package could not be opened.
Verify the patch package exists and that you can access it."
I have Office 2003 Basic Edition installed. I uninstalled the Office and
then tried to install it but still it comes up with the same message. Did
some research and used the Windows clean up utility but to no avail.
Any help appreciated.
You receive the "This patch package could not be opened" error message in Office
2003, in Office XP, or in Office 2000
http://...Hard drive space running low
My hard drive is running out of space and I'm trying to delete whatever I
can, however, I do not know if I can delete any of the following:
Microsoft Visual Studio Tools for applications 2.0-ENU
Microsoft Visual Studio Tools for applications 2.0- Runtime
Modem on hold
Picture gear 4.1 Lite
QuickStores Toolbar 1.0.0
Smart Sound Quicktracks for Premiere Elements 8.0
Tru Switch Wizard for AT&T members
Viewpoint Media Player
and a funny one: Microsoft Office XP Professional, but I have the Home
Any help will be ...Sending Publisher Files
Just got this software last week with no manual, so Im
kinda flying by the seat of my pants here.
The question is Ive put together some promotional flyers
I need to send to my customers, but I feel confident that
most would not have publisher to read them.
Can I format them another way and still keep the flyer
looking like it should?
Check out the following link on sharing Microsoft
Microsoft Publisher MVP
>Just got this software last week with no ma...Outlook for Office 2000
Need Help Badly!
Have experienced a denied access to my outlook. cannot
delete messages from any folder. message as follows:
data\microsoft\outlook\outlook.pst. could not be
have removed program and restored. have tried exporting -
help help help
How big is the .PST file?
MVP - Outlook
*** Messages sent to my e-mail address will NOT be answered -- please
reply only to the newsgroup to preserve the message thread. ***
> Need Hel...Excel 2000 Toolbar Customization
I've customized the toolbars to my satisfaction and also
created my own customized toolbar under 'views -
toolbars'. The customized toolbars work great during a
single Excel session. When I fire-up Excel the next time
it's reverted to the as-delivered toolbars. What's wrong?
How can I make a permanent change to the toolbars?
Also on start-up, Excel sometimes opens two blank
workbooks. What's that about?
Thanks much for the help.
On the custom toolbar issue:
Run a search on your HDD to locate a file called
Excel.xlb. If my guess is right. you'll find ...How do I tell if the server is running Enterprise or Standard
If I open ESM - I can tell it is 6.5 but how do I tell if it is Enterprise
or Standard. The store is small so I can't tell what version it is. I
don't want to assume it is standard or enterprise.
PS When will MS just let you open ESM go to help about and see EXCHANGE 2003
SP2 Enterprise. I don't understand why they can do that in 50 other
products but still don't do it in SQL or Exchange.
On Sat, 18 Mar 2006 08:00:45 -0800, "Boe" <firstname.lastname@example.org>
>If I open ESM - I can tell it is 6.5 but how do I t...Confused as to publishing a web site with Publisher
I apologize for using the "General Questions" forum, but the Web Design area
doesn't seem to get much response to questions (as I have previously posted
there), and this area does and I could really use the help.
Here are the steps I've gone through.
I created a site in Publisher.
I have acquired Yahoo as my web hosting provider.
I attempted to upload my files the way Yahoo, and many other "help" sites
say, by using Publish to Web, but kept getting firewall errors.
Therefore I installed SmartFTP and uploaded my .pub file successfully.
Then I realized I can't...Publisher 2000 #23
After adding a new profile on a Windows 2000 box,
Publisher decides not to work (Publisher has been working
many years previously on this desktop).
I'm getting the message: "This application must be
installed to run. Please run Setup from the location
where you originally installed the application." I tried
the resolution to Article 269276 but that did not work.
If anyone has a suggestion or resolution, it would be
very much apperciated.
...Excel 2000/Change Default Opening Location?
I'm using Excel 2000. When I open Excel, and the click on
the Open button to open worksheet, it goes to a default
location I'd like to change. How can I change that default
I have searched under Tools > Options, but find no means
Former slayer of dragons; practice now limited to sacred
cows. Believing we should hire for quality, not quotas, and
promote for performance, not preferences.
change the entry in the Default File Location box
> I'm using Excel 2000. When I open...how do I open up publisher 2003 files in publisher 2000
I received an e-mail with a pub2003 file and am unable to open it with
pub2000. Please help
Contact the person who created the file and ask them to save it as a Pub
2000 file. There is nothing *you* can do other than to upgrade to Pub 2003.
MVP Microsoft [Publisher]
"jeanrix" <email@example.com> wrote in message
>I received an e-mail with a pub2003 file and am unable to open it with
> pub2000. Please help
Outgoing mail is certified Virus Free.
Checked by AVG anti-viru...Stop a file from automatically opening in Excel 2000
How do you stop a file from automatically opening in Excel
2000? This file does not exist and there is nothing in
the XLStart folder.
Tools>options>general and uncheck ignore other applications
For everyone's benefit keep the discussion in the newsgroup.
"Brenda" <firstname.lastname@example.org> wrote in message
> How do you stop a file from automatically opening in Excel
> 2000? This file does not exist and there is nothing in
> the XLStart folder.
If you've ente...Publisher 2003
I recently uninstalled norton, added macafee, did a compression and defrag
and may have deleted a file or two . . . :P Anyway, now when I try to open
Publisher or a Publisher file from explorer, I get the error 1304 message
asking if I have access to program files/microsoft
I have access to this file and can see it from explorer. How do I correct
this issue so I can run Publisher again?
Thanks in advance for helping this noob!
Operating System? Publisher Version?
By the way, left the frying pan (Nortong) and jumped into the fire (McAfee)
I have a similar question to Issac. I want to upgrade my
Office 97 suite to the latest version, but Office XP does
not seem to contain Publisher (?), how can I get my
Publisher version, off of my Office 97 Pro Ed up to date?
I am getting Publisher files from newer eds that I cannot
After managing to set up OE-QuoteFix on his new PC, Ed reads a message
from dfran <email@example.com>...
> I have a similar question to Issac. I want to upgrade my
> Office 97 suite to the latest version, but Office XP does
> not seem to contain Publisher (?), how can I get my
...Defrag Exchange 2000 Server
Is it safe to run the Windows defrag on a server that is running Exchange
2000? I have read conflicting reports and would like some feedback from this
I'd advise against it and have never heard of someone recommending it.
"Rob" <firstname.lastname@example.org> wrote in message
> Is it safe to run the Windows defrag on a server that is running Exchange
> 2000? I have read conflicting reports and would like some feedback from
...Microsoft Publisher ?
Are you able to insert pictures and tables with it?
I currently use Microsoft Word for a lot of things but one problem I
run into and I hope can explain this correctly. I insert a picture and
want to type next to the picture but text has to be put on line below
picture which takes up space that I need.
Also not the right message board but can you insert pictures in an
excel spreadsheet and put text next to picture?
Thanks in advance for help and suggestions
In Publisher, yes.
MVP Microsoft [Publisher]
"tran" <email@example.com> wrote in message ...Oultlook 2000 CW and Exchange 2003 Read Receipts
I am trying to prevent Read receipts from being automatically responded to
in Outlook 2000 being setup with exchange 2003, in CW mode.
I have tried editing the key in the registry:
But this had no effect.
I have had a look at the article on Microsoft Knowledge Base (KB:324636)
However this is for exchange 2000, would this work in 2003 and if so, is it
possible to download the hotfix without paying for Microsoft s...Why is publisher newsletter not page wide when sent
When I am working on my email newsletter it is page wide. When I send it it
is about 4" wide. I want it to be page wide when it is sent to a client.
What do I need to do?
What do you call "page wide"? If you had started with the email template,
you would not have width issues.
MVP Microsoft [Publisher]
"Donna McDermed" <DonnaMcDermed@discussions.microsoft.com> wrote in message
> When I am working on my email newsletter it is page wide. When I send it
> is abo...Publisher for MAC
I would like to be able to use some of the publisher features on my MACBOOK
PRO, but have been unable to locate the software, I waited for Office 2008
for Mac and it wasn't there :( when are you going to have it available for we
If you try it you can be sure if you don''t like it, if you don''t try it
This post is a suggestion for Microsoft, and Microsoft responds to the
suggestions with the most votes. To vote for this suggestion, click the "I
Agree" button in the message pane. If you do not see t...Help Publishing Custom Form
I have published a custom task form to my Organizational Forms Library
following the instructions here: http://www.outlookcode.com/article.aspx?id=34.
It works great, and now I have 2 quick questions regarding selecting
the published forms:
1. Can I make the forms available by selecting the NEW menu, so I
don't have to choose the form, and then browse to find it? I would
like be able to select New and have it show my custom form there AND
the default task form for that folder.
2. If not, I think I am supposed to be able to highlight the task
folder, then select the ACTION menu and see ...convert Publisher document to Word
I created name tags in Publisher and want to convert them
to a Word document so I and type a different name on each
tag. I did it once and can't remember how - have tried
saving the Publisher file as a Word file, but it only
saves the text, not the formatting. Help!
Hi Paula (firstname.lastname@example.org),
in the Microsoft� newsgroups
|| I created name tags in Publisher and want to convert them
|| to a Word document so I and type a different name on each
|| tag. I did it once and can't remember how - have tried
|| saving the Publisher file as a Word file, but it...How do I get upgarde for publisher 98 to 2000 ?
I have set up the publisher 98 but I have installed in office 2000 on my pc.
My system is run win xp so now microsoft update office 2000 SR-1 ...so what
shall I do then .
>I have set up the publisher 98 but I have installed in
> office 2000 on my pc. My system is run win xp so now
> microsoft update office 2000 SR-1 ...so what shall I do
> then .
If you want Publisher 2000, you'll have to purchase
a copy of the program. You cannot upgrade Pub98
to Pub2000...they are two separate programs.