Exchange 5.5 Public Folder Server Binaries reinstall
My customer is on Exchange 5.5 Org. and looking to reinstall exchange
binaries for a Public Folder server on a new partition as the binaries are
not installed on the correct partition. The pub.edb is approximately 120GB.
Could someone let me know what could be the best way to perform this task
other than to replicate the data to another public folder server and then
reinstall the server correctly.
Thanks in advance.
On Mon, 15 Aug 2005 06:47:02 -0700, "Samir Marwaha"
>...Adding dependencies to a Setup Project.
When I add an exe developed in VB to a setup Project it adds dlls to the
Detected Dependencies. When I add an OCX created in C++ no dependencies are
added. Is there a way for the setup project to detect dependencies for an
OCX and add them? If not is there a way to add dependencies manually?
I wrote an OCX with one simple method. Is there way to eliminate some of
the dll dependencies needed for the project? Right now it needs
Thank You for you help.
> When I add an exe developed in VB to a setup Proj...Installing Project Time and Expense on Business Portal
When I try to install this component, it tells me that
Project Time and expense is not installed/registered in
the backoffice. Now, I do have Project Accounting
installed, up and running.
How do I get Project Time and expense to register in the
We had the same problem but now solved this.
First you need to make sure Project is registered in GP. Then you need to
setup Project in GP (system level), once done you should be able to install
BP 2.5 with Project time and Expense. If you have not setup Project in GP
(after the Project installation etc..) you will still get t...Server not visible in Deployment Manager
I've got a problem trying to extend the schema on a CRM1.2 installation.
Everything is working fine with one exception. The CRM server is not listed
under servers in the Deployment manager. That means when I try to publish
schema extensions I can't since there is No server to publish to.
Everything else seems to be running fine. No errors in the event log.
Anybody seen this before or have any ideas?
Paul Papanek Stork
MBA, CTT+, MCT, MCSE+I, MCSA, MCAD, MCDBA
Solutient of Ohio, INC.
email: pstork <<at>> solutient.com
visit ME at: <<http://info.cwru.edu/p...Large number of hits on Exchange server
We just stated a monitoring system on one of our Exchange servers (Exchange
2003, sp2). We have noticed that around 4:30pm and 10:30pm there are more
than 1000 hits to the Exchange server. We do not have that many users
connecting to this server and even with the conference rooms and public
folders, the numbers do not reach to that much. What are the things that
connect to the Exchange server? Our office close at 6pm and may be handfull
of people log in after hours to check their emails.
This server is only a stand alone server and it is not even a bridgehead
server. Do the Dir...Managing Project with only Project Server and not Project Professi
My company is currently testing Project Server 2007. While we also have the
desk top client Microsoft Office Project Professional our Portfilio Manager
would like to know if it is possible to also have projects managed using only
the web face applicaiton. While we have Project Managers here we also have
other positions here that will manage task like projects who have never used
the desk top applicaiton. Rather than having to have the application
installed on everyone's computer and training half our department my manager
wanted to know if it could be done just using web. ...Outlook client -- how to specify the server
Can anyone tell me how the Outlook client knows the address of the CRM
Server? Is it specified in the registry or is it written in a config
For 1.2 it is in the Registry at HKLM\Software\Microsoft\MSCRM
> To All:
> Can anyone tell me how the Outlook client knows the address of the CRM
> Server? Is it specified in the registry or is it written in a config
> file somewhere?
Thanks, I just found the answer when you posted. For 3.0, it is
HKEY_CURRENT_USER\Software\M...Rules Wizard on server
I have some groupmailboxes that I need to add "rules" on. My problem is that
it's about 20 of them and I don't want to log in to each and every account
and change it that way. Is there any way on the server to add rules to an
Windows 2000 Server
no, you cannot add rules to individual mailboxes! The only mean should be
with OWA on the server, but you must do that one by one!
Another possibility, you can create "Event sinks" (scripts) to test some
conditions (users...) and do some actions directly on the s...Install Outlook on exchange 2003 server = OWA won't work
I installed outlook 2003 on my exchange 2003 server. After I installed
it OWA didn't want to work anymore so I removed outlook but it still
won't work. I think it has somthing to do with MAPI.
Who knows how to solve this problem.
Daniel <firstname.lastname@example.org> typed:
> He All,
> I installed outlook 2003 on my exchange 2003 server. After I installed
> it OWA didn't want to work anymore so I removed outlook but it still
> won't work. I think it has somthing to do with M...Generate PDF Bookmarks in MS Access 2007 Reports
I have Acrobat 9 Standard and generate numerous reports out of MS Access 2007
into the PDF Format. The reports are grouped, but I can only get a bookmark
with the report's name. I need bookmarks for each group. How do I do that?
I did this a while back using NitroPDF, it has functionality to scan the pdf
looking for certain type of fonts and when it finds them it makes bookmarks.
Example all group heading are in Arial 14, setup rules to scan for Arial 14
and make bookmarks.
I never automated the process since the user I did it for only needed to do
it for one pdf and they ...Task report
I have two questions about the tasks -
1. Is there a way to setup our own Status options? The
ones in Outlook (not started, Waiting on Someone Else,
etc) don't really give us exactly what we need.
2. When we print a task list we set it to print
the 'notes' column but it cuts off the entries. Is there
a way to tell it to word wrap this field?
We're using Outlook 2000. One machine in the office is
using Outlook XP.
Thanks for your help
...The same HTTPS certificate on different server
We have two web servers running on Win2003 Standard.One is for production
and the second for testing. The have different IPs, but the public URL is
the same. From time to time we switch public IP (our company web site)to
second private IP server for testing purposes, and then back to the first
Can we use the same SSL (HTTPS) web certificate (issued by Versign) for both
of the servers for our company domain? If yes, how can this be done on a
second server in IIS?
Yes, it can be done.
Using the MMC Certificate snap-in, export the certificate ...Content deployment job not working after Moss dec 2009 CU Update
We have configured a content deployment job on our server farm. Which takes
the content from the source Site collection and migrates the contents to
different site collection on a different farm. The job is not working now
after the Moss Dec2009 CU updates.
The job gets struck showing the job status as “Preparing”.
We had checked the Moss log files for errors we are getting the following
error on Moss log files:
05/12/2010 12:08:39.88 w3wp.exe (0x0290)
0x1EDC CMS Content De...Windows Event Log Reader (not server based)
Fist, I already know about "Log Parser" and all the sever-based Event
What I would like is a simple GUI utility to read/view SAVED Event Log
Anyone know of such a utility (non-server)?
NOTE: I do have a shortcut in my "SendTo" folder that runs a Command
using "Log Parser" but this is a workaround.
"C:\Program Files\Log Parser 2.2\logparser" "SELECT ALL * FROM %1" -
"\EventLogArchive" = C:...Opening Projects with Project Pro is slow
do you have any recommendations how to tackle performance bootlenecks when
opening project plans wiht Project Pro is sometimes very slow?
Thanks for any advice
Which version of Project Server, what service packs and CU's do you have
installed and what circumstances?
Microsoft MVP for Project - http://www.project-systems.co.nz
Author of the only book on Project VBA, see: http://www.projectvbabook.com
"Adrian Miller" <email@example.com> wrote in message
news:#YhVTuevKHA.404@TK2MSFTNGP...Exchange public folder replication to an IMAP server
I have a couple of questions regarding public folders in exchange 2000/2003
that I can't find much info on at all:
1. Can an IMAP folder on an external server be seen in (or linked to) an
Exchange environment as a public folder?
2. Can an exchange public folder automatically and regularly send its
contents to an external IMAP server?
The purpose would be to let users receiving spam emails (which managed to
slip through the spam filter) to drag and drop them into a public folder.
The spam items would then be delivered via IMAP to an external anti-spam
server (spamassa...Remove orphan domains for EXCH 2007 install
In a test disaster recovery environment, we have recovered our DC, and
would like to remove two child domains that are obviously not
reachable. What is the most clean and easiest way to accomplish this?
Sorry for the lack of depth to this question, I am fairly new to AD.
What we have done is rebuilt our DC, rebuilt an Exchange box, and now
on another box we are trying to install a beta instance of Exchange
2007. In order to continue with the install, AD must not see the child
domains it can no longer reach.
Thanks for your help
On 4 Oct 2006 09:07:20 -0700, "Gregg" <gre...Project Accounting
I have had a question from a customer who uses project accounting (V10).
They have set up a project with 2 fees attached. Originally the Tax Schedule
against the Fee IDs was set as 'Based on Customer' and they have processed
Now it has been establised that one of the Fees should be 'Non-taxable'. The
Fee ID has had this change made.
For the project, when drilling back against the individual Fee line -the
fees still shows as 'Based On Customer'
Is it just a simple matter of changing the tax schedule at this point?
I am a complete beginner at Pro...Unable to connect to e-mail server
I recently began receiving a message when I open Outlook that the file
contained macros and that macros were diabled.
Since that time I have enabled macros and no longer receive that message,
however I can only receive my e-mail messages once then I get the message
that "Outlook is unable to connect to your incoming (POP3) e-mail server."
I have to restart my computer to get it to reconnect.
I am running Windows 2000 SP4 and Outlook 2002 SP3.
Any suggestions would be appreciated.
...SMTP Virtual Server Queue
When I click the Queues under server in the exchange system manager I get
this error "Exchange System Manager failed to retrieve queues for the SMTP
Virtual Server (error code = 0x800706BA" . The setup is a single server
On Fri, 27 Apr 2007 13:24:04 -0700, Nick
>When I click the Queues under server in the exchange system manager I get
>this error "Exchange System Manager failed to retrieve queues for the SMTP
>Virtual Server (error code = 0x800706BA" . The setup is a single server
>environment....Money 2005 not updating
I'm currently using MS Money 2005 Canada and noticed that my last update
for my mutual funds took place on Dec 30. Nothing in 2006 at all.
It just stopped updating in 2006.
Is this a new "feature" where we have to buy the 2006 version in order to
update our mutuals.
My money 2006 Small Business's last update data were Dec.29, I didn't get
any update for my Canadian Funds either although the auto update feature
shows that it is working everyday, but just nothing been downloaded.
"cdr" <firstname.lastname@example.org> wrote in message
news:Xns9742D487A...Reminders in Outlook 2007
When you have a reminder in the calendar in Outlook 2000 (or 2003) you see
a liitle clock. In Outlook 2007 you don't. How can I see this clock in
...break slide link in word 2007
I have Office 2007. Want to break the link to the slides I have in my word
doc. When I right click the slide, I only get open or edit, or convert.
Could you help me locate the right place to break the link; and if necessary
add-in I need for Word and/or powerpoint?
In Word 2007, click the Office button and choose Prepare. To the right
you'll see an item "Edit Links to Files" (which appears only when
there are linked items in the document). Click that to open the Links
dialog. Select any or all of the listed links and click the Break Link
...Outlook 2007 Icon on Start Menu doesn't work
Don't know what I did but the Outlook 2007 Icon at the top of the Start menu
has changed from the original and when I click it I get Internet Options,
not Outlook....all the other Icons for outlook work OK. How can I revert to
the original working icon?
"Gordon" <email@example.com> wrote in message
> Don't know what I did but the Outlook 2007 Icon at the top of the Start
> menu has changed from the original and when I click it I get Internet
> Options, not Outlook....all the other Icons for ...Exchange Server & POP Account
I set up a POP account on my local machine which delivers
my email from an exchange server for my main mail account.
This POP account was for a dead mailbox which I had
disabled the User access. So, I used my login and
password for my exchage server access and popped the
account and lost all the emails in my exchange server mail
Are these emails gone forever, and what happened,
shouldn't every single message in the main account
download to the Pop account?
Did you get any errors during download? By default, POP removes messages
from the server, so if you don't have th...