Use critical patch from the M$ Corp.
Content-Type: multipart/related; boundary="cowurgxnr";
Content-Type: multipart/alternative; boundary="wcmnuvgvn"
this is the latest version of security update, the
"October 2003, Cumulative Patch" update which resolves
all known security vulnerabilities affecting
MS Internet Explorer, MS Outlook and MS Outlook Express
as well as three newly discovered vulnerabilities.
Install now to continue keeping your...receivings #3
When we are receiving products, we noticed that the freight and miscellaneous
charges are not coming over from the PO. Why is that that and how do we go
about correcting it?
I don't remember them ever coming over. These amounts on the PO document
only serve as a reference. If you need these amounts as landed cost for your
on your receipt transaction you will need to setup a landed cost schedule. If
they are simple expenses then you will need to enter them on the purchasing
invoice as they appear on the vendor invoice.
Mariano Gomez, MIS, MCP, PMP
Maxim...Two sets of Personal Folders #3
I have two sets of Outlook Today - [Personal Folders] on my folders list.
They are duplicates. How do I get rid of one of them?
You can try this option:
Milly Staples [MVP - Outlook]
Post all replies to the group to keep the discussion intact. All
unsolicited mail sent to my personal account will be deleted without
After furious head scratching, SAC asked:
| I have two sets of Outlook Today - [Personal Folders] on my folders
| list. They are duplicates. How do I get rid of one of them?
...Updating Accounts #2
I just upgraded to Money Plus Deluxe (Have XP) When I go into Money it states
its "updating account" and my CPU usage is at 99% when I run Money. There are
NO accounts that are being automatically updated as I do them all manually.
The "updating accounts" icon stays up until I finally have to turn off
computer because I cannot work on any other part of money as it says it is
doing an online function.
It also goes online to seek its own updates. Do you have SSL2 enabled in
Internet Options? Do you have firewall software enabled beyond the XP
firewall...update trigger question
If I have something like this in an update trigger:
if update(FirstName) or update(LastName)
update n set FullName = i.FirstName + ' ' + i.LastName from Names n
inner join inserted i on n.NameID = i.NameID
I only want FullName to update if either FirstName or LastName are updated.
Here's my question. A batch update updates 50 rows in the table. Of the 50,
only 20 have changes made to the FirstName or LastName columns. It's my
understanding that the "if update()" ONLY allows 20 rows that fit the if
update criteria to be updated in the...goal seek wont calculate an accurate value past 3 decimal places
I have a traditional situation in which to use goal seek. I need the value in
one cell to equal a certain value by changing another cell. But the value I
want it to go to is very small like 0.04459. So when I click calculate goal
seek gets the first 3 decimal places correct, but the remaining ones are off.
So does goal seek not calculate past 3 decimal places or am I doing something
wrong? Any help would be appreciated. Thanks.
Check column widths for starters and then have a look at cell formatting for
number of decimal places.
Mine works fine, Office 2000
&quo...windows update 09-21-03
Is there a way for me to recieve an E-mail everytime there
is a security update avalible ????
Take a look at:
Remember that Microsoft does not send out patches by email. This is
especially important because many worms will fake such emails, and
attach themselves. I write this after deleting almost a hundred of
J Wolfgang Goerlich
...Macro to change pivot field with latest value 03-01-10
This is a re-post as my questions hasn't been answered by anyone...
Hi there and thank you in advance for any help.
I have written a macro that changes (hides / shows) fields on a pivot table.
One of these changes the field used for the page fields section of the pivot
table. However, when i add a field to this section, it defaults to All. How
can have this field default to the latest value in this field.
Let me explain further: I want the pivot to be shown either by date or by
week. The macro then changes the page field section to show either the date
or week field. If ...Why do non-default pst files update?
I have two pst files the default is 52MB and the other 45M. I only
use the default so why is the other file have the same update date?
In article <MPG.firstname.lastname@example.org>,
> I have two pst files the default is 52MB and the other 45M. I only
> use the default so why is the other file have the same update date?
post cancelled - I read the file dates incorrectly
...Main dlg's DoModal returns -1
I just created a new Win32App Dialog-based project with
Windows sockets support. When trying to run the program
the main dialogs DoModal returns -1, so the application
...Latest Baseline Set on Task
How can i find out the latest baseline number set on the tasks through
reporting database. The biggest challenge is, a PM can move his baseline back
& forth (amongst all 10 baseline varaibles).
That could be a training issue. The latest baseline should always be Baseline0.
When saving a baseline, users should save to Baseline0 and BaselineX, thus
ensuring that there's a historical record. This also allows us to create
new composite baselines rather than simply creating a brand new one for all
By default MPP and PWA both display the...Money 2007 won't stop updating
After my bank switched to a more secure login method, I have (I
thought) had Money discontinue updating automatically for this account
by setting the update frequency to "Never". However, I am having
problems with my bank account being hit with unsuccessful logins
resulting in the locking of access to my account. The bank says that
the logins are coming from a third-party banking service. How can I be
sure either Money 2007, the corresponding information on MoneyCentral,
or the corresponding information in Yodlee (the 3rd party provider
between my bank and Money 2007) isn't conti...When is the latest version not the latest version
This is not really a question - but maybe someone else can benefit from the
pain I have been through today.
I have been doing development work for the past few weeks using RDC in to a
By last Friday, with disconnects happening every 20 seconds, I decided it
was time to bite the bullet and install the license of Office 2007 I have
bought and pull everything to my own office dev site.
After 4 hours of fighting SQL 2005 being unable to restore a SQL 2008 backup
I finally had a complete environment.
However, I found that a popup short cut menu in a subform di...How to check updated information?
How can I automatically check if there has data changed in a table?
Can I have a popup about that?
Could you describe more about what you mean by data changing and WHEN
you want to automatically check this? You can always create an audit
trail that is triggered on the after update event of your data entry
form and use that to see what has changed. Can you give us more to go
MS Access MVP
On Mon, 16 Jul 2007 08:13:09 -0000, hanski
>How can I automatically check if there has data changed in a table?
>Can I have a popup ...how to decode iso-8859-1
I have this kind of string,
dim myString as string = " =E0 ton essai d'=E9tablir une"
i know the kind of encoding, here I have iso-8859-1
dim charset as string ="iso-8859-1"
how to decode it with a component of the .NET Framework?
Encoding e = Encoding.GetEncoding("iso-8859-1");
"steve mettraux" <email@example.com> wrote in message
> I have this kind of string,
> dim myString as string = " =E0 ton essai d'=E9tablir une"...Glitch while updating
My daughter's computer was recently doing an update. We were at the point
where the computer was rebooting and had the screen "do not turn off your
computer, updating......" etc. Unfortunately, our ISP went out at that
time, and the computer was left in that limbo for over 24 hours. I finally
just hit the power button to turn it off, and now when we turn it on it is
in a continual loop of rebooting itself. I've tried putting in the Windows
disk and it reads it okay, and will get so far to reinstall, but then it
does the same thing and reboots itself.
I do...Query All records except latest
I need to limit my query to ALL RECORDS EXCEPT the most current record.
Any ideas on how to do this
It will look something like this, assuming no more than one record per date
per key field. You can adjust to use date/time if that is needed. It
depends on what makes your records unique. Try something like this,
substituting your table and fieldnames...
Select myKeyfield, field1, field2, field3, myDate
Where myDate < (Select max(myDate) from myTable AS T2 WHERE T2.myKeyfield =
Using Outlook 2007
When I send an email, I notice that the status bar on the bottom of the
screen states that 3 emails are being sent.
It says 'Sending message 3 of 3' when I know only one email is being sent.
I usually force each send with the send/receive button, so its not because I
have pending emails in the outbox.
Does anyone know why this is?
Could this be because I manage 3 accounts from Outlook during the
send/receive action so it considers
How can I get Outlook to show me exactly what is being sent (rather than
just looking at the sent box at what h...latest hot fix for rams
is it true that you have to pay for hot fixes.?
we have to pay for fixes that should be done in the first place.
Anyways is there a way to download hot fixes from some other source except
This is a multi-part message in MIME format.
If you are not on a RMS Maintenance program with MBS, then yes. If you =
are on Maintenance, just go into CustomerSource, open a new support =
incident and ask for the latest version of RMS. Be ...Deletion Service in 3.0
Anyone know what the deletion service is really doing? I thought I knew
what it was doing, which is deleting records that had been marked for
deletion in the CRM. It runs every 2 hours and tonight I ran a SQL Profiler
trace on it. It issued ~850 delete statements against my database,
approximately 500 of which where against the activitypointerbase table. The
whole thing ran in 2 seconds so I guess I should be thankful that it's
So the service ran at 8:18pm and then again at 10:18pm (the latter being the
one I traced) just like clockwork. I can guarantee that no...Is any .net updated required for the new daylight savigns time, or just update the OS is all that is needed? Do DateTime objects need to be updated in .net runtime?
Is any .net updated required for the new daylight savigns time, or just
update the OS is all that is needed? Do DateTime objects need to be updated
in .net runtime?
...FW: Install this patch
Content-Type: multipart/related; boundary="pplssskdxvlv";
Content-Type: multipart/alternative; boundary="ipjbrgbtm"
this is the latest version of security update, the
"October 2003, Cumulative Patch" update which fixes
all known security vulnerabilities affecting
MS Internet Explorer, MS Outlook and MS Outlook Express.
Install now to help maintain the security of your computer
from these vulnerab...Time of by 1 hour
Hello, the time I receieve my emails are off by 1 hour .
How can I fix this?
Thanks in advance.
Check your time zone and daylight saving time settings in both Windows *and*
Outlook on your machine. If all of those are correct, it's a server
MVP - Outlook
*** Messages sent to my e-mail address will NOT be answered -- please
reply only to the newsgroup to preserve the message thread. ***
> Hello, the time I receieve my emails are off by 1 hour .
> How can I fix this?
> Th...How to update multiple stencils when linked with Excel database
I am working on a project that uses multiple stencil files. I am able to
export to an excel database, and refresh each symbol by dragging to the
drawing, but am wondering how I could update multiple symbols at one time in
the actual stencil file from the excel database? The ONLY updates I can find
update one at a time and I am needing a quicker way to update my symbols'
custom properties all at once, rather than editing each individual custom
property. I am using visio 2003 standard.
Is this possible with Visio and excel?
Do you mean drawings rather than stencils? A stencil is a ...Exchange dst patch 926666
We have patched our workstations for the dst chagne with 931836 and run the
outlook time zone update tool successfully, but have not patched
exchange2003, sp2 with the 926666 owa patch yet. Is it still necessary to
run the 926666 patch on exchange? I looks like the owa calendars I've
checked have been corrected. My concern is that if I run the patch at this
point it will move the appointments that are showing correctly on owa back an
additional hour. Also, I am assuming you have to run the 926666 patch on the
front and back end exchange boxes. Any advice apprecia...