How do I create a line through x=0 in a XY Scatterplot chart? I can plot
(x, y) and y=0 but not x=0. I am graphing linear inequalities and
identifying the feasible region for a mathmatics class.
Thanks for the help
Sure that's not a Line graph (category X axis) instead of a XY scatter
(Value X axis)?
Joe Gabba wrote:
> How do I create a line through x=0 in a XY Scatterplot chart? I can plot
> (x, y) and y=0 but not x=0. I am graphing linear inequalities and
> identifying the feasible region for a mathmatics class.
> ...12.2.0 backward compatibility
Operating System: Mac OS X 10.5 (Leopard)
Installed the update. How come I can't open pptx files anymore?
> Installed the update. How come I can't open pptx files anymore?
You haven't said what's happening yet. What happens when you try?
Entourage Help Page <http://entourage.mvps.org/>
Entourage Help Blog <http://blog.entourage.mvps.org/>
Twitter: follow <http://twitter.com/meck>
In article <59b78772.-1@webcros...Upgrade from 12.0.0 to 12.1.0 not possible
Operating System: Mac OS X 10.6 (Snow Leopard)
After downloading the huge update file and doing the first clicks here and there in the update software it starts to look for the hard disk where the office is installed. It shows the HD but it is dimmed and not possible for me to select. <br><br>Any suggestions? <br><br>Werner
Yes I did booted from that driva and yes I am admin. <br><br>The message I get from the installer is : Office 2008 SP1 Uptade (12.1.0) can not be installed on this disk. A version of the software requ...Entering 0.0.0.0 (0.0.0.0) in the connection filter deny list
I'd like to block all incoming connections by entering 0.0.0.0 (0.0.0.0) in
the deny list in Exchange 2003's Connection Filtering under Message Delivery,
but the Okay button is greyed out. Is this normal? As a workaround I've
entered these two entries instead: 18.104.22.168 (22.214.171.124) and 126.96.36.199
As for the "why am I doing this," these servers are in an isolated area and
should only be receiving mail from two specific servers that I've added to
the accept list.
On Tue, 11 Jan 2005 09:57:06 -0800, "adam"
<firstname.lastname@example.org&...Sending an SMS text message to a phone in CRM 4.0 via workflow
In CRM 3.0, we had a workflow that would send an SMS to a phone upon creation
of a Case. Somehow, this is no longer working in CRM 4.0; the workflow fires
succesfully with nor errors, but the (short) message is never received.
Possibly because of the non ASCII format of the message CRM 4.0 sends out...?
(To send an SMS, we just create a duplicate user record with the SMS/Phone
address in the e-mail field).
...V3.0 System Settings
Has anyone come up with a resolution to system settings not being saved?
I've tried running the SBE Config Wizard, I've tried lowering my IE Security
Settings. I've even had a poke at the registry to see if there was anything
obvious in there. I've done fresh installs with eval and valid licence
keys....in short I've tried evertything I can think of short of facing the
wind from when it blows from the east, and casting dry chicken bones in the
hope of a positive outcome.
Any help or suggestions will be gratefully accepted.
If you are talking abou...Slow video response in CE 6.0
Working on some GUI code, based on drawing bitmaps and text on the
screen (so no standard windows widgets), I am facing the following
problem. Using the same code on CE 5.0 the screen transition is smooth.
When switching to CE 6.0 screen updates take a considerable amount of
time longer and I notice the screen title is drawn before the rest.
This is due to an invalidate being called after the title draw and
before the rest of the screen, but on CE 5 (and on mfc win32), this
update happens so fast, that the invalidate and full redraw can't be seen.
Any idea what might be g...two 9.0 GP systems going to one 10.0 GP system
I have to different 9.0 GP systems (call the oldest one A and the newest one
B) that I need to merge into one system but should I update one of the system
(B) to 10.0 then bring the other system data (A) over or should I update
both systems then bring system A's data into system B.
system A is really old (1999 data is still in it) and System B is only about
3 years old.
any words of wisdom from the professionals?
You'll need to upgrade both databases to 10.0 because 10.0 introduced
some additiional fields in tables that weren't present in the 9.0
Frank...Fundware --> GP 8.0
Has anyone migrated from American Fundware to GP. We are having a heck of a
time getting this to work. Help!! We are using an application called
Corridor move the data out of Fundware and into GP. Has anybody done this?
Did you find a solution?
"Ken McNeil" wrote:
> Has anyone migrated from American Fundware to GP. We are having a heck of a
> time getting this to work. Help!! We are using an application called
> Corridor move the data out of Fundware and into GP. Has anybody done this?
...MS CRM 3.0 Small B. ed. modules
We have installed Small business server on one computer with all requirements
fullfilled. The problem is: we have available only 3 of 5 (or 6) modules:
service, settings and workplace. The other 2 - marketing and sales (wich we
consider to be the most important) are not available (we can't see them).
Does anybody know how to solve the problem? Thank you!
may be i have a solution for you.
You have to check the other modules in the following menu:
- startpage of CRM
- options (--> a new page will be shown)
Then click on workplace:
there you can...why does excel add 0's to a cell?
when I add numbers to a cell, excel adds tree zero's to the number. Is this a
bug in excel? How can I fix this problem?
Check the number format for the cell. Format it as General.
Microsoft MVP - Excel
Pearson Software Consulting, LLC
"Kathryn" <Kathryn@discussions.microsoft.com> wrote in message
> when I add numbers to a cell, excel adds tree zero's to the
> number. Is this a
> bug in excel? How can I fix this problem?
If Chip's su...Formulas Divided by 0 =#Div/0!
I usually come across this problem, and I fix it with a simple if statement.
But today, I have received a huge spreadsheet and this problem is all over
the place, at least 100 entries. Cut and paste the modifed formula with an
if statement will not work.
Is there an easier way to show a 0 or blank in this cells instead of #Div/0!
If you're only interested in hiding the errors--not changing the values, you
could use conditional formatting.
Select the cell (say A1)
Format|conditional formatting (xl2003 menus)
And make the font color t...CRM v4.0 (Titan) XP and Office 2003 Compatibility
When Microsoft CRM Version 4.0 is released, will I be required to upgrade to
Vista or Office 2007? i.e. will version 4.0 work on my current XP
Is their any documentation to back this up?
Those of us testing Titan are under NDA so cannot say anything at this
Microsoft CRM MVP
"Neil Max" <NeilMax@discussions.microsoft.com> wrote in message
> When Microsoft CRM Version 4.0 is released, will...Error 22003 when log in GP 9.0
When I log-in a company with a large number of invoices in SOP30300, the
Great Plains 9.0 pop up error message which indicates ODBC error 22003
(Numeric Value Out Of Range).
After tracing the log, I found the GP9 run following T-SQL:
select isnull(Select count(*) as 'CNT' From INV.dbo.SOP30300 (nolock) LEFT
OUTER JOIN .....
this statement return a integer more than 64000, but the ODBC parameter is
defined as SQL_C_SSHORT.
I think it cause the "OUT OF RANGE" error.
After the error, GP9.0 hang up.
IS THERE ANY HOTFIX on this problem.
Thanks at advanc...GP 7.5 to 9.0 upgrade failed during "Load Table Auto Procs"
Upgrading a client from GP 7.5 (SP6) SQL to 9.0
In the "Server Installation Progress" window (normal upgrade in GP Utilities)
During "Updating database: xxxxxx" in step "Load Table Auto Procs"
We receive the message (window title: Microsoft Dynamics GP Utilities):
"The stored procedure UpdateDB_Upgrade() of form duSQL
Pass Through SQL returned the following results: DBMS: 12,
Microsoft Dynamics GP: 0."
with the OK button.
Responded to the message 4 times, then...
"Microsoft Dynamics GP Utilities install/upgrade failed."
Anyone run ...Upgrade from DP v8.0 to Gp v9.0
I have been administrating GP v8.0 for a little while and have recently
upgraded to v9.0. I am running into a problem where users can not login. The
specific error is "Login failed. Please contact your systems administrator"
The users never had a problem before the upgrade and even 2 weeks into the
new platform then all of a sudden users can not connect. I have tried
deleting users and recreating them, even establishing a new ODBC connection.
I have searched up and down for a fix but to no avail. I actually have two
clients that experience this quite regularly with...Do not install Rollup 2 for 4.0!
I'e installed Rollup 2 on my test environment and now I cannot publish
workflows which earlier were published with success. I have tried already
adding authorizedtype tag into web.config and reinstalling Rollup2. Nothing
I have enabled tracing. Trace results are below. I do not know what they
# CRM Tracing Version 2.0
# LocalTime: 2009-01-30 20:50:42.5
# Categories: *:Error
# CallStackOn: Yes
# ComputerName: CRM1TEST
# CRMVersion: 4.0.7333.1113
# DeploymentType: OnPremise
# ServerRole: AppServer, AsyncService, DiscoveryService, WebService,
ApiServer, Hel...Invoicing Services in GP 8.0
We have a need to invoice field services. We have items set up corresponding
to our technicians with the appropriate rates. In our previous accounting
application, we could open a line item note window and free-type notes
specific to that customer's issue and resolution.
GP has line item notes, but they are not unique to the order. I need to be
able to change these line item notes (many, many times this is several
hundred characters of text) with each new sales order and possibly multiple
services with multiple notes on one order. We have found references to "line
item c...incorporate the remove #DIV/0! code into another formula to get bl
hi there, i have this formula below, and i somehow want to incorporate this
=IFERROR(B1/C1,"") into it with the purpose of having the cell display
nothing instead of #DIV/0! so that the column of data can then allow an index
and match formula to work as it won't if any of the cells have #DIV/0! in
them, any suggestion?
=(SUMIF($B$2:$B$2500,">=" & T58,$M$2:$M$2500)-SUMIF($B$2:$B$2500,">=" &
T58,$D$2:$D$2500)-SUMIF($B$2:$B$2500,">=" & ...Y=1, N=0 How?
I know this may same easy but Im new to Excel formulas. I have created a
spreadsheet where I want the response of Y or N to have a numerical
value. The values will be added up and averaged. Thank you for your
Message posted from http://www.ExcelForum.com/
One way, assuming cell A1 is the cell with the response
"moocar_99 >" <<email@example.com> wrote in message
> I know this may same easy but Im new to Excel formulas. I have create...Excel 2003: 1+1=0?
A couple users where I work have started noticing a problem where
Excel will randomly decide to stop performing calculations.
Essentially, if you type in an expression, Excel states that it is
equal to zero. So, entering "=1+1" will result in "0", likewise,
"=375+2352" will result in "0". Even "=1/0" returns "0". It happens
in any spreadsheet, even new ones, and the time at which it occurs
does not appear to be predictable. I wasn't able to find anything
that could explain this. Has anyone here heard of this or have any
...Install Analytical Accounting module for GP 9.0
Like a previous post, our company has recently purchased a new module AA.
I have the new license keys. I am using GP 9.0
To activate analytical accounting:
Is it true, all I have to do is register the new key?
Our system is already in use, We have econnect, int manager, PO, and other
modules already installed. Should I expect downtime for the users?
thanks in advance,
Software Manager GHI
In general, when entering new registration keys, it's always best to have
all users out of GP.
For AA specifically, unless you installed it already when you were ini...Crystal Report 10.0
Do we have to purchase Crystal Reports 10 seperately even if we have GP 8.0?
I believe V8 still comes with 1 license of Crystal Reports V10. I received
the update to Crystal Reports when I received my upgrade disc for GP 8.
"Ani" <firstname.lastname@example.org> wrote in message
> Do we have to purchase Crystal Reports 10 seperately even if we have GP
If you have GP Standard, you have to buy Crystal. If you ha...Vlookup returns a "0"
I am using a vlookup that works mostly as I expect. That is, when
there is a value to be returned, it returns the value - however, there
are instances where no value will be returned, in some cases, Excel
leaves the cell blank (as I prefer), in other cases, it populates the
cell with a 0 (zero).
What can I do to not have it populate with a zero? And why the
discrepancy between the two behaviors?
Please post your formula and examples of your table and search argument. How is the formula cell formatted?
Microsoft MVP - Excel
<email@example.com> wrote i...Data Audit 1.0 for Microsoft Dynamics CRM 4.0
Data Audit 1.0 for Microsoft Dynamics CRM 4.0
Data Audit add-on is a perfect solution for Microsoft Dynamics CRM, it
records the fact: Who did What at When.
For example: you want to audit changes for the field: Account.EmailAddress1,
all you need to do is just 3 clicks! The add-on will record the entity name,
audit field, record id, original data, modified data, modified time, modified
by information. Those audit histories for this record will associate with the
record(for applicable entities), furthermore, you can also see all audit
histories in one place.
It is an ISV solution to i...