Sent Message Rule
I know this is an Outlook ng. but I'm using Outlook Express and can't seem
to create a rule that copies my sent messages to a particular folder. 2
e-mail addresses in one Account. I want to send the sent messages from the
Sent Items folder to another.
The Bear <email@example.com> wrote:
> I know this is an Outlook ng. but I'm using Outlook Express
Then you should ask in an Outlook Express newsgroup.
...Inventory field question...
Which field in which table holds the flag that markes an item as
Is there a schema explanation somewhere?
The field is ITEMTYPE in the table IV00101 - Inventory Item Master -
discontinued would mean it is set to a 2.
You can see this under Tools>Resources Descriptions>Inventory and then look
for the Item Master table it will show that field set to a 2.
Hope that helps,
> Which field in which table holds the flag that markes an item as
> Is there a schema explanation somewhere?
I have an MFC application which is based on a modal CDialog. It
contains a Picture control which is resized if the parent dialog size
changes - this keeps the picture control occupying the full width of
the CDialog's client area.
The Picture Control is used to display video, but when the dialog box
size is stretched it causes a lot of flickering because the Picture
Control repeatedly redraws its background while also displaying the
According to the documentation, I just have to trap WM_ERASEBKGND
messages for the Picture Control to prevent it drawing its background.
So I created ...Either \ or conditions in rules
Is it possible in Outlook 2003 to create a rule with either \ or conditions,
eg If the message has certain words in the subject line OR if there are
certain words in the body of the message? As far as I can see, you can only
create conditions linked with AND.
In that scenario, you would need to create two separate rules, each with =
the same actions.=20
Sue Mosher, Outlook MVP
Author of Configuring Microsoft Outlook 2003
and Microsoft Outlook Programming - Jumpstart for=20
Administrators, Power Users, and Developers
...1.2 to 3.0
I've had a look but not found anything on this - what is the deal with
licensing 3.0 if you've already got 1.2?
Can the 1.2 licenses be used in 3.0 or are we going to have to pay a
If you have valid Software Assurance cover on the current licensesI think
that you will get the new software as part of that. If not I think that you
have to buy it from scratch.
"Bouffont" <firstname.lastname@example.org> wrote in message
> Hi All,
> I've had a look but not...rules based on recipient address
We have one mailbox that has different email addresses that point to it. We
have within this mailbox folders. Depending on what email address mail was
sent to we want rules to move them into the relevent folder. Outlook and/or
Exchange shows the name of the account in the 'to' feild so that our rules do
not work as they are based on where the email was sent. how can we get over
IE main is Internet. Mail sent to email@example.com should go to Internet but
then get moved to the 'WEB' folder based on the firstname.lastname@example.org address. But
Internet is showing in the recpient field.
I would like to use colors to change an email when
received from 1 of a group of like 60 people. (All 60
senders I would like to color their email when recieved)
I am limited by the number of color rules that I am
allowed to put into place.
I am unable to create one rule for the group of users as
well, as I get an error and outlook closes on me.
There is probably a very simple script that can be
written but I am not that familiar with writing those.
I have tried to assign category through a rule on the
list of these people, but it will not allow me to upload
to the exchange ...Copying the column heading into all non-empty cells #3
Gord you're a genius!
Thanks so much - that works a treat! Sorry I didn't get back to yo
last night - I'm in London and it was past my bedtime.
The reason I'm copying the headings into the rows by the way, is that
have a database which I want users to be able to search, and it's easie
if I just have have one column listing all the Amenities for each hotel
rather than 120.
Incidentally, my next move is to now merge all the cells in each ro
into one, with the amenities separated by spaces. I've just downloade
a "Merge Cell Wizard", which has accomplished th...Message Rules
Why don't the message rules work? I keep making messages to block the word
Viagra (any combination of spelling variations) and numerous other words, and
delete the messages. I have over 400 rule, most about Viagra, and NONE of
them are working.
What exactly are you specifying? See http://www.insideoe.com/tips/rules.htm
The rules are the same in WinMail except they added the junk folder.
"Darrell Bartels" <Darrell Bartels@discussions.microsoft.com> wrote in
> Why don't the mes...Why doesn't this question get answered?
Where I work we have a computer that wants to install the Japanese
language pack when a specific email is opened in Outlook 2002. This is
only happening with one email, on one computer. If this same email is
sent to another person, the Japanese language pack installation prompt
does not appear when the email is opened. I have checked the Regional
and Language settings, but see nothing that indicates why Japanese is
trying to be installed. I have found several topics posted by people
with the same problem, but only one answer has been given, and the
answer did not solve the problem.
I would like to create a bar graph for say 7 days showing hotel occupancy
For each day I have this data:
A) budget room nights first 5 days at 50 rooms each night, last 2 days
75 rooms each
B) Actual room nights (and this is where it gets tricky.)
The actual room nights comes from 2 sources: the actual reserved guests
who arrived + the "walk-ins" (who didnt have a reservation)
Results for the week:
Monday 40 5...Using MS Access to ODBC 3.0 Filtered views
I seem to be getting an issue seeing the records in FilteredActivityParty
table through a linked table in MSAccess. The view is correctly returing 5
records for one Appointment record but they are all the same Filterrecord.
When I do the same query in MS Query I get 5 records returned and they are
Can anyone can shed any light on this?
I have a list of contractors in column 1 and their bid price in column 2. Is
there a way to use one of the "lookup" functions (or any other function) to
show the low bid contractor and their qoute in a pair of cells located at
the top of my worksheet without having to sort the list? In one header cell,
I'm using =MIN() to determine the lowest bid price, but I can't seem to link
the matching contractor with his bid.
Any suggestions would be greatly appreciated!
where A2:A50 are the contractors and B2:B50 their bids
y...Steven Lebans A2K2 Question
Steven, I want to apply the A2K2 to a form that has pie charts. Since MS
Graphs need to have the labels for the "slices" adjusted as they change. So I
currently do everything on a form and manipulate the labels, Save it, close
it, then SAVE AS a report. then use the A2K2 to mege to a Word document that
i can add comments to and e-mail. If i can do this on the form, i can save a
few steps. I can't do a macro to do all of this, either. I can't do any
PDF's, for various reasons.Any thoughts...
...How do I set up Server Rule to move Emails to a an Exchange 2007 public Folder?
Dear Exchange people,
We are using Exchange 2007 and Outlook 2003 and Outlook 2007. I have
emails that come in every day that need to be moved to an Exchange
public folder based on words in the emails subject. I set up a rule
in Outlook 2003 to move it to the public folder automatically and it
usually works when Outlook is open, but I need it to just run on the
server and not require Outlook to be open to run it. Would anyone be
so kind and friendly as to share with me an example of how to get it
to work on the server and not require the Outlook client to process
Thanks in...Emulate Out of Office Assistant in a rule?
I want to be able to emulate the OoO assistant in a server
side rule, specifically I want it to only reply once to
Currently we have several customer service and tech
support mailboxes that have server side reply rules that
reply with a template directing them to our website for
support. However, this rule EASILY gets caught up in loops
to the point where I have to check it daily and turn off
the rule temporarily to break the loop.
I would use the Out of office assistant on the mailboxes,
but the subject text "Out of Office:" seems to be static
which wouldn...Outlook2003: Display rules disappear (Tools/Organize/Colors/Automatic..)
Some help needed re rules created in Tools/Organize/Colors/Automatic..:
Those rules disappear randomly and without obvious reason. Some of them move
to an other folder, where they are useless.
Is there any way to save/restore those rules in order to avoid rekeying
everything again and again?
Where are they located? Are they accessible?
Thanks for your help,
they are stored in views - did you change views on the folder where you lost
The best way to keep them is to copy the current view or make a new view and
set the rules.
Diane Poremsky [MVP - Outlook]
...Rules in Error
I have a number of rules in place to reduce spam by
permanently deleting certain messages upon their arrival
based on content. But every day the "Rules in Error"
window pops up with the message "You don't have
appropriate permission to perform this operation" and the
applicable rule is deactivated from that point on. This
seems to occur randomly for no particular reason. If I
subsequently run the rule manually, the messages are then
Is there a way to stop this?
...Message Rules Unavailable (2002)
Running Outlook 2002, I don't seem to have the "message rules" installed. I
did select Junk-Mail during custom setup, but no rules option under Tools.
Also when right clicking on a message there is "Junk Email" but it results
in a blank submenu.
I seem to be missing the rules wizard. How can I remedy this?
"Battleax" <email@example.com> wrote in message
> Running Outlook 2002, I don't seem to have the "message rules" installed.
> did select Junk-Mail during custom setup, b...Can I remove last 3 characters in portion of a link?
I have example of a hyperlink that is fragmented for use of inserting a
Need O9 (variable) to be truncated of last three characters, so far have:
(need fix for 1st hyperlink expression "O9", to lose last 3 characters if
thanks in advance
You can embed the if statement into the body of your formula:
=HYPERLINK($U$5&IF(RIGHT(O9,3)<>".pk",O9,LEFT(O9,LEN(O...OL 2007 Rules
I am having some weird problems with the rules in Outlook.They seem to
stop working after awhile. I have to create a new one for them to start
I running Outlook 2007 (12.0.6423.1000) SP2 MSO (12.0.6425.1000)
Anyone else having any issues with rules?
...One Column on 1st y-axis and 3 lines on 2nd y-axis
On Excel 2003 I am using the custom chart "Line-Column on 2 Axes". I would
like one column (series 1) for the first y-axis and 3 lines (series 2-4) for
the 2nd y axis. It seems that when adding series, that 2 columns are
automatically created when you exceed 2 series. Every seried added after the
second series results in lines for the 2nd y axis. If I delete one of the
first 2 series (columns) then the next series which is a line is
automatically converted to a column. My desired end result is to have only
one column on the 1st y axis and the 3 lines on the 2nd ...Some basic questions
I have some basic questions about Access. I hope you can give me a
-Can I define derive attributes? How? I think I can get a workaround
by defining a query that selects some attributes and computes
others... but I would need the derived attribute to be available
directly on the table.
-Can I define views in Access? Or, alternatively, use the result of a
query as an input for another query?
-Is it possible to make external unions? (i.e., unions of relations
with different attributes -completing with nulls if necessary).
-Is there any trick to enforce that two relations ...Portal Query parameter syntax question
Hi, Business Portal 3.0/ GP 10. I'm trying to create a date query to
restrick rows . I want to prompt the user for a date range. I know were to
create the restrictions but can some one tell me the proper syntax?
Doc Date is between (dd-mm-yy 1) and (dd-mm-yy 2) ?Is there a way to prompt
the user for a date range?
...Rules, Rules, Rules
I am trying to make a rule that tells people I am out of
office because I don't have an out of office menu (do not
use Exchange). When I select "reply using a specific
template" I run into a problem. I do not have
any "Standard Templates" loaded so I want to create one
under "User Template in File System". But this is looking
for a *.oft file. What is a *.oft file and how do I create
one? Any other way to accomplish making this rule?
Create your out of office message using Outlook's mail editor, not word.
then use file->save as->outlook templ...