Using word as editor for outlook issue
One of my users is having issues with using word as the editor in outlook
when replying to aol.com messages.
Basically she is not able to use word as an editor for aol emails that are
sent to her.
She receives a message that "Word is set to be your e-mail editor. However,
Word is unavailable, not installed, or is not the same version as outlook.
The Outlook e-mail editor will be used instead."
Is there anyway to use Word as the editor to reply back to aol.com users?
It's just really weird that it only happens when she replies back to aol
users and word works perfectly ...Access 2003 SP3 Run-time error 2004
My Access 2003 application periodically generates run-time error 2004.
There isn't enough memory to perform this operation. Close unneeded programs
and try the operation again.
'Creation of new form
Dim Frm As Access.Form
Set Frm = New Form_XYZ 'There
This error is unpredictable. It's hard to reproduce in test environment.
I want to know what objects are checked in msaccess.exe, in order to find
the source of the error may be available in my VBA code.
There are several hotfixes for SP3. Here's a link to Allen Browne's page on
the SP3 bugs,...Either \ or conditions in rules
Is it possible in Outlook 2003 to create a rule with either \ or conditions,
eg If the message has certain words in the subject line OR if there are
certain words in the body of the message? As far as I can see, you can only
create conditions linked with AND.
In that scenario, you would need to create two separate rules, each with =
the same actions.=20
Sue Mosher, Outlook MVP
Author of Configuring Microsoft Outlook 2003
and Microsoft Outlook Programming - Jumpstart for=20
Administrators, Power Users, and Developers
...rules based on recipient address
We have one mailbox that has different email addresses that point to it. We
have within this mailbox folders. Depending on what email address mail was
sent to we want rules to move them into the relevent folder. Outlook and/or
Exchange shows the name of the account in the 'to' feild so that our rules do
not work as they are based on where the email was sent. how can we get over
IE main is Internet. Mail sent to email@example.com should go to Internet but
then get moved to the 'WEB' folder based on the firstname.lastname@example.org address. But
Internet is showing in the recpient field.
...Sent Message Rule
I know this is an Outlook ng. but I'm using Outlook Express and can't seem
to create a rule that copies my sent messages to a particular folder. 2
e-mail addresses in one Account. I want to send the sent messages from the
Sent Items folder to another.
The Bear <email@example.com> wrote:
> I know this is an Outlook ng. but I'm using Outlook Express
Then you should ask in an Outlook Express newsgroup.
...Cannot delete or open assigned tasks
Hi, pulling our hair out on this one. I can find plenty of references to
this in groups but no solution, explanation or even a clue where to start.
Any help would be greatly appreciated.
Various OS and Outlook versions, mostly XP Pro some 2000 Pro, and Outlook
2000, 2002, 2003. Exchange 2000 running on SBS 2000.
A user creates and sends a task request. He or she CAN open or delete this
task request from sent items. The recipient CANNOT open or delete task.
"Can't open this item. The property does not exist. The field you want to
modify is not valid for this type...Error Message. #2
I am using GP 7.50g3. I have installed the GP into a new notebook that come
with Windows Xp SP2 (With all latest Security Patches and updates) and get
the following message. I have no problem installing it using the same method
previously on other PC.
"The Great_plains.vbs project references some objects that cannot be found.
These objects are listed in file: C:\MBS\GPS75\Dynamics.txt"
What should I be doing to get this issue sorted out. Any help will be
If its a new installation with no modification of any kind then you can go
Why don't the message rules work? I keep making messages to block the word
Viagra (any combination of spelling variations) and numerous other words, and
delete the messages. I have over 400 rule, most about Viagra, and NONE of
them are working.
What exactly are you specifying? See http://www.insideoe.com/tips/rules.htm
The rules are the same in WinMail except they added the junk folder.
"Darrell Bartels" <Darrell Bartels@discussions.microsoft.com> wrote in
> Why don't the mes...Outlook 2003 SP2 crashes sometimes while opening "other contacts"
We have Outlook 2003 SP2 (cached mode) with Exchange 2003 SP2 in our
environment. Since a few months myself and some other users are
experiencing the problem, that Outlook is sometimes crashing, when we
click on any contact in "other contacts" (some public folders that are
added to favourites).
The applications log says
Faulting application outlook.exe, version 11.0.8010.0, stamp 43d16d53,
faulting module emsmdb32.dll, version 11.0.8000.0, stamp 43599ef9,
debug? 0, fault address 0x00091956.
The fault address is always the same.
I cant exactly say since when the problems occu...My Publisher 2003 documents don't open in Publisher 2007.
My Publisher 2003 documents will not open in Publisher 2007. For example, a
26 page document with text and pictures opens as 1 page with title only. Is
there a procedure I should know?
> My Publisher 2003 documents will not open in Publisher 2007. For
> example, a 26 page document with text and pictures opens as 1 page
> with title only. Is there a procedure I should know?
Can you open/create and view any
multi-page documents in Pub2007?
MS Picture It! -
Digital Image MVP
High...Error In Wizip Save as File
i am trying to save a winzip attachmnet as file and i get=20
always this error:
Outlook cannot save the url to a file , can=B4t find this=20
file .Make sure this file exist and file name are correct.
This happened only to a specified user.
Any help;(Outlook 2000 sp3)
...Syntax Error on DLookup
I have a code that I've copied and used several times but it isn't working in
this one instance. The control to which this is attached is on a subform
nested 4 deep. The control to which it is referring "Measurements" is on
Subform3 (the parent of subform4). Here's my code:
DLookup("Expr1", "qryMeasurements", "Measurements = " &
Me.Parent!Measurements) & " "
Please let me know what I may be missing. Thanks so much!
Not sure if this will work but try this syntax:
Me.Parent.Form!Measure...Outlook backup 12-21-09
Cannot open back up, asked to 'select encodingthat makes your document
readable' tried most of them in the drop dowm menu, no joy. Help please.
You provided no information. State how you created the backup. State how you
are trying to open it.
"Hasty" <Hasty@discussions.microsoft.com> wrote in message
> Cannot open back up, asked to 'select encodingthat makes your document
> readable' tried most of them in the drop dowm menu, no joy. Help please.
...Outlook Problem when opening it.
This is a multi-part message in MIME format.
Two of my users are experiencing the same problem. They close =
Outlook, then when they open it back up, it says it cannot locate the =
Exchange server. DNS is setup correctly. I have tested it several =
times. I then re-setup the Outlook profile and it connect just fine. =
But once they close it again, it cannot connect again until I reset it =
again. Any ideas!
------=_NextPar...Opening Attachments in Outlook #4
Recently encountered a problem opening Word and Excel
attachments in Outlook. After clicking on the attachment,
it takes a long time for the file to open, about 30 - 45
seconds when normally it opens a couple of seconds. I ran
virus software and none were found. If I save the file to
disk and the open it up through Word or Excel, it opens
normally. All other computers in the company are fine.
Does anybody have an idea of what may be causing this?
Diane Poremsky [MVP - Outlook]
Author, Teach Yourself Outlook 2003 in 24 Hours
C...CRM3 Error when going off line 04-17-06
Just installed the 'offline' version of the Outlook CRM client on my laptop.
I am using CRM without Exhange. Whenever I try to take the laptop offline and
click the 'go offline' button I am getting the error: "Failed move data for
entity 'E-mail' during action saInsert, countRows=161. Contact your system
administrator for assistance and try going offline again"
Have tried going again with no luck any idea on what I should be doing to fix
the error? TIA
We are getting this error too. Any chance you were able to resolve
Bump... Anyone g...Something is modifying my Outlook.PST file
I have Outlook installed on both my desktop and laptop. I have been
synchronizing the Outlook.PST file between the two quite successfully for
years. Lately I have noticed that the synchronization would report that
the file had been modified on both PC's even though I know I hadn't
opened it on the laptop or even run anything that should be accessing the
Outlook.PST file on the laptop.
So I started monitoring the situation by regularly looking at the
modified time on the files on both machines. So far this morning
something has modified the Outlook.PST file on both machines seve...Color rule
I would like to use colors to change an email when
received from 1 of a group of like 60 people. (All 60
senders I would like to color their email when recieved)
I am limited by the number of color rules that I am
allowed to put into place.
I am unable to create one rule for the group of users as
well, as I get an error and outlook closes on me.
There is probably a very simple script that can be
written but I am not that familiar with writing those.
I have tried to assign category through a rule on the
list of these people, but it will not allow me to upload
to the exchange ...Sharing Outlook Quickparts
I've been looking into quickparts and need a good way for my users to
exchange quickparts. So far the only way I've seen is to trade
normalemail.dotm between users. (or point to it within word file
locations if you're on the same network. We're not so that isn't an
I was really hoping that there was a way to create a parts gallery
within the exchange public folders and allow people to pull from that
Does anyone know if there's a way to this or if there's another/better
way to accomplish this?
...How do I set up Server Rule to move Emails to a an Exchange 2007 public Folder?
Dear Exchange people,
We are using Exchange 2007 and Outlook 2003 and Outlook 2007. I have
emails that come in every day that need to be moved to an Exchange
public folder based on words in the emails subject. I set up a rule
in Outlook 2003 to move it to the public folder automatically and it
usually works when Outlook is open, but I need it to just run on the
server and not require Outlook to be open to run it. Would anyone be
so kind and friendly as to share with me an example of how to get it
to work on the server and not require the Outlook client to process
Thanks in...Outlook2003: Display rules disappear (Tools/Organize/Colors/Automatic..)
Some help needed re rules created in Tools/Organize/Colors/Automatic..:
Those rules disappear randomly and without obvious reason. Some of them move
to an other folder, where they are useless.
Is there any way to save/restore those rules in order to avoid rekeying
everything again and again?
Where are they located? Are they accessible?
Thanks for your help,
they are stored in views - did you change views on the folder where you lost
The best way to keep them is to copy the current view or make a new view and
set the rules.
Diane Poremsky [MVP - Outlook]
...Transfering Messages from Windows Live Mail to Outlook
I have a customer who is using Windows Live Mail (WLM).
He has 142 441 files that take 13.3Gb.
He keeps on loosing contacts everytime he quits WLM. In addition, He uses
the signature feature to preprogram replies to his emails. With WLM when you
reply, they all disappear and only the default signature remains. Finally,
everytime he starts WLM, it is very slow because it scans his 142 441 files
all the time.
So I recommended to use Outlook. However, it is limited to 2Gb when we try
to import data from WLM.
Can you recommend a solution?
EURL US Info
In W...Emulate Out of Office Assistant in a rule?
I want to be able to emulate the OoO assistant in a server
side rule, specifically I want it to only reply once to
Currently we have several customer service and tech
support mailboxes that have server side reply rules that
reply with a template directing them to our website for
support. However, this rule EASILY gets caught up in loops
to the point where I have to check it daily and turn off
the rule temporarily to break the loop.
I would use the Out of office assistant on the mailboxes,
but the subject text "Out of Office:" seems to be static
which wouldn...delegates error message
I am getting the following error message when trying to
"The Delegates page is not available. Unable to access
Is there anything I can do to fix this. Thanks.
Recheck the permissions and shares on the shared source folders and the
delegate ppl added also check with your Network Admin and make sure that no
network permissions have been changed.
...OMA gives ASP errors when trying to access
I am using Exchange on an SBS server. Exchange and Outlook Web Access
work fine, but I can't get Outlook Mobile Access to work. If you
attempt to access OMA from a web browser, it gives an error. The
Failed to map the path '/'.
Description: An unhandled exception occurred during the execution of
the current web request. Please review the stack trace for more
information about the error and where it originated in the code.
Exception Details: System.Web.HttpException: Failed to map the path
An unhandled exception was generated during t...