Our year end is June 30. Typically after year end, we run reports that show
deprecation for the year and accumulated. However, we need to run reports
that cross fiscal years. Specifically, we need it to run for CY2006. Any
...Either \ or conditions in rules
Is it possible in Outlook 2003 to create a rule with either \ or conditions,
eg If the message has certain words in the subject line OR if there are
certain words in the body of the message? As far as I can see, you can only
create conditions linked with AND.
In that scenario, you would need to create two separate rules, each with =
the same actions.=20
Sue Mosher, Outlook MVP
Author of Configuring Microsoft Outlook 2003
and Microsoft Outlook Programming - Jumpstart for=20
Administrators, Power Users, and Developers
...Access 2003 SP3 Run-time error 2004
My Access 2003 application periodically generates run-time error 2004.
There isn't enough memory to perform this operation. Close unneeded programs
and try the operation again.
'Creation of new form
Dim Frm As Access.Form
Set Frm = New Form_XYZ 'There
This error is unpredictable. It's hard to reproduce in test environment.
I want to know what objects are checked in msaccess.exe, in order to find
the source of the error may be available in my VBA code.
There are several hotfixes for SP3. Here's a link to Allen Browne's page on
the SP3 bugs,...1.2 to 3.0
I've had a look but not found anything on this - what is the deal with
licensing 3.0 if you've already got 1.2?
Can the 1.2 licenses be used in 3.0 or are we going to have to pay a
If you have valid Software Assurance cover on the current licensesI think
that you will get the new software as part of that. If not I think that you
have to buy it from scratch.
"Bouffont" <firstname.lastname@example.org> wrote in message
> Hi All,
> I've had a look but not...rules based on recipient address
We have one mailbox that has different email addresses that point to it. We
have within this mailbox folders. Depending on what email address mail was
sent to we want rules to move them into the relevent folder. Outlook and/or
Exchange shows the name of the account in the 'to' feild so that our rules do
not work as they are based on where the email was sent. how can we get over
IE main is Internet. Mail sent to email@example.com should go to Internet but
then get moved to the 'WEB' folder based on the firstname.lastname@example.org address. But
Internet is showing in the recpient field.
...Sent Message Rule
I know this is an Outlook ng. but I'm using Outlook Express and can't seem
to create a rule that copies my sent messages to a particular folder. 2
e-mail addresses in one Account. I want to send the sent messages from the
Sent Items folder to another.
The Bear <email@example.com> wrote:
> I know this is an Outlook ng. but I'm using Outlook Express
Then you should ask in an Outlook Express newsgroup.
Why don't the message rules work? I keep making messages to block the word
Viagra (any combination of spelling variations) and numerous other words, and
delete the messages. I have over 400 rule, most about Viagra, and NONE of
them are working.
What exactly are you specifying? See http://www.insideoe.com/tips/rules.htm
The rules are the same in WinMail except they added the junk folder.
"Darrell Bartels" <Darrell Bartels@discussions.microsoft.com> wrote in
> Why don't the mes...Error Message. #2
I am using GP 7.50g3. I have installed the GP into a new notebook that come
with Windows Xp SP2 (With all latest Security Patches and updates) and get
the following message. I have no problem installing it using the same method
previously on other PC.
"The Great_plains.vbs project references some objects that cannot be found.
These objects are listed in file: C:\MBS\GPS75\Dynamics.txt"
What should I be doing to get this issue sorted out. Any help will be
If its a new installation with no modification of any kind then you can go
...Error In Wizip Save as File
i am trying to save a winzip attachmnet as file and i get=20
always this error:
Outlook cannot save the url to a file , can=B4t find this=20
file .Make sure this file exist and file name are correct.
This happened only to a specified user.
Any help;(Outlook 2000 sp3)
...how do you Combin Percentages (ie 0 to 2 %) in a pie a chart 2007
how do you Combin Percentages (ie 0 to 2 %) in a pie a chart for 2007
...Logo On receipt #2
I am unable to print our store logo on to our receipts. It will show in
manager but not print in manager. The image is monochromatic B&W. It is under
the 20k regulation. It is correctly directed in administrator. It shows in
the preview under database – registers - receipt - formats - 40 column -
properties – properties. It is listed in the logo filename header and has “”
around it. I go to print and no logo on receipt and no space for the logo. It
will also not print in Store Operations, nor will it show on the receipt in
journal viewer but it will show on the receipt in journal vi...Syntax Error on DLookup
I have a code that I've copied and used several times but it isn't working in
this one instance. The control to which this is attached is on a subform
nested 4 deep. The control to which it is referring "Measurements" is on
Subform3 (the parent of subform4). Here's my code:
DLookup("Expr1", "qryMeasurements", "Measurements = " &
Me.Parent!Measurements) & " "
Please let me know what I may be missing. Thanks so much!
Not sure if this will work but try this syntax:
Me.Parent.Form!Measure...CRM3 Error when going off line 04-17-06
Just installed the 'offline' version of the Outlook CRM client on my laptop.
I am using CRM without Exhange. Whenever I try to take the laptop offline and
click the 'go offline' button I am getting the error: "Failed move data for
entity 'E-mail' during action saInsert, countRows=161. Contact your system
administrator for assistance and try going offline again"
Have tried going again with no luck any idea on what I should be doing to fix
the error? TIA
We are getting this error too. Any chance you were able to resolve
Bump... Anyone g...Color rule
I would like to use colors to change an email when
received from 1 of a group of like 60 people. (All 60
senders I would like to color their email when recieved)
I am limited by the number of color rules that I am
allowed to put into place.
I am unable to create one rule for the group of users as
well, as I get an error and outlook closes on me.
There is probably a very simple script that can be
written but I am not that familiar with writing those.
I have tried to assign category through a rule on the
list of these people, but it will not allow me to upload
to the exchange ...How do I set up Server Rule to move Emails to a an Exchange 2007 public Folder?
Dear Exchange people,
We are using Exchange 2007 and Outlook 2003 and Outlook 2007. I have
emails that come in every day that need to be moved to an Exchange
public folder based on words in the emails subject. I set up a rule
in Outlook 2003 to move it to the public folder automatically and it
usually works when Outlook is open, but I need it to just run on the
server and not require Outlook to be open to run it. Would anyone be
so kind and friendly as to share with me an example of how to get it
to work on the server and not require the Outlook client to process
Thanks in...Outlook2003: Display rules disappear (Tools/Organize/Colors/Automatic..)
Some help needed re rules created in Tools/Organize/Colors/Automatic..:
Those rules disappear randomly and without obvious reason. Some of them move
to an other folder, where they are useless.
Is there any way to save/restore those rules in order to avoid rekeying
everything again and again?
Where are they located? Are they accessible?
Thanks for your help,
they are stored in views - did you change views on the folder where you lost
The best way to keep them is to copy the current view or make a new view and
set the rules.
Diane Poremsky [MVP - Outlook]
...Emulate Out of Office Assistant in a rule?
I want to be able to emulate the OoO assistant in a server
side rule, specifically I want it to only reply once to
Currently we have several customer service and tech
support mailboxes that have server side reply rules that
reply with a template directing them to our website for
support. However, this rule EASILY gets caught up in loops
to the point where I have to check it daily and turn off
the rule temporarily to break the loop.
I would use the Out of office assistant on the mailboxes,
but the subject text "Out of Office:" seems to be static
which wouldn...delegates error message
I am getting the following error message when trying to
"The Delegates page is not available. Unable to access
Is there anything I can do to fix this. Thanks.
Recheck the permissions and shares on the shared source folders and the
delegate ppl added also check with your Network Admin and make sure that no
network permissions have been changed.
...OMA gives ASP errors when trying to access
I am using Exchange on an SBS server. Exchange and Outlook Web Access
work fine, but I can't get Outlook Mobile Access to work. If you
attempt to access OMA from a web browser, it gives an error. The
Failed to map the path '/'.
Description: An unhandled exception occurred during the execution of
the current web request. Please review the stack trace for more
information about the error and where it originated in the code.
Exception Details: System.Web.HttpException: Failed to map the path
An unhandled exception was generated during t...Excel 2000 #2
How come the Move or Copy Sheet under Edit is grayed out for this particular
data file? I can't access it.
Is the workbook protected?
(You may need a password)
> How come the Move or Copy Sheet under Edit is grayed out for this particular
> data file? I can't access it.
...GP10 Upgrade error Help Please.
I am upgrading from 8.0 sp5 to 10
I am tryingto run the script on page 27.
select RTV_Return_Status from SVC05002 group by RTV_Return_Status having
count(*) > 1
I get the following error
Server: Msg 208, Level 16, State 1, Line 1
Invalid object name 'SVC05002'.
Page 27 say to call Microsoft or email support if results are retured after
running the script.
Support is closed and I was hoping to get this done over the weekend.
Anyone out there have any ideas?
Thanks in advance for your help.
Aftere further review I am thinking maybe I do not have this table because we...Publisher #2
I have had no problem uploading web files using FTP until today. I made
changes to my web site. Deleted the web files and the old exported web files
and them tried to upload the new files when I got this message. "To edit
this Web site in the future, edit the original.pub file, and then esport as
"Web Page, Filtered" again." To continue upload did not give me the correct
upload. What happened??? Thanks, Bill
...Rules in Error
I have a number of rules in place to reduce spam by
permanently deleting certain messages upon their arrival
based on content. But every day the "Rules in Error"
window pops up with the message "You don't have
appropriate permission to perform this operation" and the
applicable rule is deactivated from that point on. This
seems to occur randomly for no particular reason. If I
subsequently run the rule manually, the messages are then
Is there a way to stop this?
Few days ago I have asked the same question but didn't get any answers.
:( This is my problem:
I have written plugin for one app and it crashes here:
if (m_nFlags & WF_CONTINUEMODAL)
// enter modal loop
DWORD dwFlags = MLF_SHOWONIDLE;
if (GetStyle() & DS_NOIDLEMSG)
dwFlags |= MLF_NOIDLEMSG;
//It crashes on the line below
VERIFY(RunModalLoop(dwFlags) == m_nModalResult);
I belive that possible cause was that I didn't initialized MFC in any
way. I have noticed this in my other pro...MS Outlook 2003 Error when reply/forward email of a delegated mailbox with signing and encryption
Hello all experts,
We are working on a project with Outlook 2003 and Exchange 2003.
Customer requires some mailboxes being delegated to others for daily
usage and signing and encryption are always required for emails
However, we got some problem on the following situation:
mailbox UserA is being delegated to mailbox UserB.
UserB open mailbox UserA and then try to reply one of its email.
by default, the sender is set to UserA and the security settings have
UserA's cert for signing and encryption. However, when send out the
email, the signature is signed by UserB's cert.