send messages through POS
I have a client that has 4 stores and HQ and wants to use the feature of
sending messages(email) in the pos systems. Are they able to send messages to
each other at other stores or this is for local store only.
This is a multi-part message in MIME format.
Unfortunately, it can only be done with an add-on. Check with Retail =
Realm www.retailrealm.co.uk as one who offers one.
Check Point Software...Reading .wks file
Greetings...according to the Excel "help" file, as well as the file extension listing, I *should* be able to read an *.wks file, but Excel insists that it cannot. I am pretty sure the file was created in Microsoft Works. Is there a converter somewhere that I can download/install? Cheers - S2
Excel can read Works 2.0, not later. You have to save them in Works as excel
files or Works 2.0 or get a commercial
"Skip Stocks" <email@example.com> wrote in message
news:AFC110E0-641D-4D87-9464-B930CC41CF02@microsoft....0x800CCC90 error message Outlook 2003
"Receiving' reported error (0x800CCC90) : 'Your incoming (POP3) e-mail
server has reported an internal error. If you continue to receive this
message, contact your server administrator or Internet service provider
(ISP). Server responded: -ERR problem retrieving message.
Moved from Outlook 2000 to Outlook 2003 with the purchase of a new computer
and trying to set up the email accounts for myself and my wife with our ISP.
Set up my wife's account, and she's able to send and receive no problem.
I used the exact same setup routine on my account, and ran into "...Possible to globally set fields in messages views?
I have numerous folders and subfolders in my in-box. I now
have Outlook 2003 on WinXP, formerly using Outlook 2000 on
Win2k. In neither one can I find a way to either change the
e-mail default fields once and for all (in which case I'd
want one default for in-coming and another for out-going),
or to change existing folders all at once (in which case I'd
again want to set all in-box folders one way and all sent
folders another way.
Is there any way to do this? If so, how?
Bob <firstname.lastname@example.org> wrote:
> I have numerous folders and subfolders in my in-box. I n...Unencrypted Messages
We receive some email message from our peers in a university setting who do
not use Outlook. We are unable to read the body of their email messages.
We can read the subject line but that is all. We also received a "Notepad"
Below is the message we received from the university's IT staff
"The university server can read your messages, but the university messages
to you are not encrypted. Your software, apparently Microscoft Exchange,
unencrypts the already unencrypted messages that I send you, transforming
the legible to illegible."
Any ideas on how to re...SBS2008
I have configured my Server. Now when I send a message it get's stuck in the
Outgoing SMTP queue. in SBS2003, there's a setting in the SMTP properties
for "always Run", but I cannot find whee to edit SMTP connector properties
(OR POP3 Connector Properties, for that matter) in the 2008 Exchange System
Manager. Please advise where to fins these settings or other advice.
Are you sending out Via SMTP or DNS?
Russell Grover - SBITS.Biz [SBS-MVP]
MCP, MCPS, MCNPS, SBSC
Microsoft Certified Small Business Specialist
Small Business Server/Comput...File won't open as read only
I have a file that is in use, but another person opens it
and it doeasn't display the "file is in use" message. Is
there a setting or fix?
have you shared this file?
> I have a file that is in use, but another person opens it
> and it doeasn't display the "file is in use" message. Is
> there a setting or fix?
The file is on a network share. The share has all the
>have you shared this file?
>Frank Ka...How to give other users read-only access to Calendar
I want to allow the group Everyone to have read-only access to a calendar in
a certain mailbox. I can do this by granting the permission 'Full mailbox
access' (under 'Mailbox rights', under 'Exchange Advanced', for the
particular user). However this also allows people to to do everything (ie:
they become read-write users).
I notice that every mailbox in the system has 'Read permissions' granted to
group Everyone. This does not allow other people to open items in the
mailbox, but as I understand it, permits Exchange Server and Outlook to do
shared meetin...Process Performance Counter Disabled Error Message when backing up
Everytime I try to backup and/or restore an act database I get this message.
Any idea how to resolve it ? Even the ACT consultants have not been able to
sort it out
...Need parameter to write data to table: please help!
I have a query that tells me how long each batch will take to make in the
The fields are: release date, priority, status, work order number, vessel,
vessel group, and total time.
I would like to input the start time for the highest priority (lowest
number) batch for each vessel group. I am going to use a form for this.
How do I write a parameter to only use the start date I input for the lowest
numbered priority in each vessel group?
Create your form first. Then wherever you want to use the start date in your
query, just right click and select build.. then browse to your f...IMAP setup error message
Here is my complete error message:
Your IMAP command could not be sent to the server, due to non-network
errors. This could, for example, indicate a lack of memory on your system.
User name: email@example.com
Secure (SSL): 0
I used the same configuration to set up mail on my iPhone. Any ideas?
> Here is my complete error message:
> Your IMAP command could not be sent to the server, due to non-network
> errors. ...Read mail arn't marked as read anymore
After an SP upgrade of my Office 2000 the priviewed mail
doesnt get marked as read anymore. I have tried to change
the time (Tools->Options->Priview pane) from 2 -> 3 -> 4
seconds but nothing works. The only way to mark a mail as
read is either to open it or right click it and chose
Mark as read. Since I only use the priview pane this is
very anoying for me.
Is this a bug or has some setting changed with the SP?
...Text message in asp.net
Does anyone know of a way to send a text message from an aspx page? We are
doing email just fine and some of our customers would like to be contacted
via text message. Any help or links would be appreciated.
On Aug 28, 3:40=A0pm, DavidC <dlch...@lifetimeinc.com> wrote:
> Does anyone know of a way to send a text message from an aspx page? =A0We=
> doing email just fine and some of our customers would like to be contacte=
> via text message. =A0Any help or links would be appreciated.
You need special hardware for this. Or may...Failed to copy messages to the destination mailbox store.
I am trying to move mailboxes from exchange 2000 to
exchange 2003 using acitve directory user and computer, by
selecting exchange tasks, then move mailbox utility.
I have successfully moved some users from exchange 2000 to
exchange 2003, but i am getting this for some users.
On the source server.
Event ID 9172
Failed to copy messages to the destination mailbox store.
Error: The MAPI call failed.
MAPI or an unspecified service provider.
ID no: 80004005-0000-00000000
Event ID 1008
Unable to move mailbox 'Goins, India'.
Error: The MAPI call failed.
MAPI or an unspecified...bad debt write offs
How do I post bad debt write offs? I need the write off to reduce the payees
balance so they don't show up on a receivables report anymore. I tried
creating an expense to offset the uncollectable debt but the payee still
shows an outstanding balance. Help please!
"Tara in Austin" <Tara in Austin@discussions.microsoft.com> wrote in message
> How do I post bad debt write offs? I need the write off to reduce the
> balance so they don't show up on a receivables report anymore. I tried
I have a problem with outlook. When they send a message to me that demands
the shipment of a reading confirmation, even if I accept, the reading
confirmation does not come received from the sender. Someone knows from what
depends and in which way I can resolve the problem?
Thanks for the eventual answers.
Niki <firstname.lastname@example.org> typed:
> Good day,
> I have a problem with outlook. When they send a message to me that
> demands the shipment of a reading confirmation, even if I accept, the
> read..."Unblock" feature should be optional when reading e-mail in CRM
When viewing e-mail messages in CRM, a line appears saying "Unblock" to allow
the full message content to be read. Can this be made a configurable server
or security setting? We are trying to reduce "clicks" as much as possible.
This post is a suggestion for Microsoft, and Microsoft responds to the
suggestions with the most votes. To vote for this suggestion, click the "I
Agree" button in the message pane. If you do not see the button, follow this
link to open the suggestion in the Microsoft Web-based Newsreader and then
click "I Agre...checking the write protect status of floppy disk
Is there any way to check whether the floppy disk is write protected
Currently I'm writing a file in floppy disk and check the error
message for write protected(ERROR_WRITE_PROTECT)
Is there any other method to check the status of floppy disk
Look at IOCTL_DISK_IS_WRITABLE
Don Burn (MVP, Windows DKD)
Windows Filesystem and Driver Consulting
Remove StopSpam to reply
"Mani" <email@example.com> wrote in message
news:4b268a00-e2e5-4318-959a-2...Exchange over http
I set up my computer at home to use Exchange 2003 over http. It
downloads all of the messages in my inbox to my local Outlook (here at
home), but removes them from the server. Is there any way to stop
this from happening?
are you sure you're not using POP3? Are your contacts- and calendar folders
"m22baker" <firstname.lastname@example.org> wrote in message
> Please help,
> I set up my computer at home to use Exchange 2003 over http. It
> downloads all of the messages in ...File, Send, Message to Mail Recipient
We use Sage line 50 and send mail via Outlook to recipients. This has
stopped working. We've reinstalled Sage, reinstalled Office 2000, removed
and reinstalled both and even installed office 2003 to try and get it
From Word, we can send to, but not Sage. Anyone have any ideas?
Regards, Neal Blackie.
Have you checked Sage's support? Integration with Office/Outlook is
something that they would be responsible for, not Microsoft.
Milly Staples [MVP - Outlook]
Post all replies to the group to keep the discussion intact. Due to
the (insert latest v...The memory could not be "read".
I'm at work yesterday afternoon responding to e-mail on my desktop, and
Adobe pops up from the toolbar with a notice that there is an update
available for Acrobat. I accept the download, keep plugging away at my
e-mail, and install it when it's done. It runs through the install,
tells me that I should restart, but I ignore it and keep working. It's
near the end of the day and I'm going to be going home soon anyways. I
forgot to turn it off when I left. Came in this morning, restarted it
through the Start menu, and rebooted. Upon reaching the "Ctrl+Alt+Del"
...how can i copy a document to a CD without making it read only?
HOW CAN I COPY A DOCUMENT TO A CD WITHOUT MAKING IN READ ONLY?
You can't. It is not the file, but the media, that is read only. Even CD-RW
media does not allow editing a file on the CD. Copy te file from CD to HD,
mak edits and if a CD-RW you should be able to burn the edited file back to
> HOW CAN I COPY A DOCUMENT TO A CD WITHOUT MAKING IN READ ONLY?
...Unable to Read Japanese Email
I correspond with several Japanese users and can read emails from some of
them without a problem, but emails from others are nothing but a series of
?????. In one case, I can read one email but not another from the same
sender. Changing the Encoding doesn't help. Sending emails in Japanese to
them without a problem...they can read it fine. Would appreciate any
suggestions/solutions as I'm stumped.
I'm using Outlook 2003 on a Windows XP Home operating system. Japanese
language support is installed.
...Transferring read e-mail to another folder
I was wondering whether there was a way in which I could
automatically transfer my e-mail that has been read into
another folder, such as "Old e-mail" or something like
...Empty deleted items, now cant view any messages or folders
I have a PST file with about 8 subfolders that is about 500MB in size.
I did a "empty deleted items folder" on it today, and it seemed to
delete *everything*, all messages and all subfolders. Only the deleted
items folder (which is empty) is still visible.
The actual PST is still there, and still 500 MB in size. I ran
SCANPST.EXE on it, and it detected 1 error, fixed it, but there is
still nothing there. Interestingly SCANPST.EXE summarizes that there
are 8 folders but no items in the PST .. outlook shows no folders or
items at all (except deleted items).
Can anyone suggest ho...