W2K/Ex5.5 to W2K3/Ex2K3
having two separate physical machine server1(Win 2000 SP4, Ex5.5 SP4)
and server2(Win 2003, require to install Ex2003 on this server with all
mailboxes moved from server1 to server2). not sure where to install ADC,
hence installed ADC on both server1 & server2, when i try to configure and
run i get an error "server1 not an Exchange 5.5 server or an SRS service"
When i try installing E2K3 on server2, joining exchange site on server1,
unable to join it because the ADC
not working? how can i go about this.?
first of all you shoul...No longer download messages via outlook
I find that i can no longer download messages, even thoughmy account setting
are correct, (Outlook Expresss has no problems using the same settings!!!).
problems seemed to manifest themselves after installing XP SP2 and some
Trevor Pratt <firstname.lastname@example.org> wrote:
> I find that i can no longer download messages, even thoughmy account
> setting are correct, (Outlook Expresss has no problems using the same
> settings!!!). problems seemed to manifest themselves after installing
> XP SP2 and some other fixes.
Try turning off the Windows firewall and see if...Re-arranging table using pivot-table?
I have a worksheet with data organized somewhat like this:
New York New York
New York Albany
California Los Angeles
California San Diego
I need to convert this to a list of states and each city in the columns to
the right of their corresponding state. Something like this:
New York New York Albany
Florida Miami Orlando Tampa
California Los Angeles San Diego
Any help is greatly appreci...Re-install Outlook 2002
I am trying to re-install Outlook 2002 for my palm pilot
after a crash. The installation will run until I get the
message - "another version is already installed and must
be uninstalled". The previous version was corrupt and I
was unable to uninstall it. Now when I go into the control
panel to add/remove the uninstall is no longer in the
...550 5.7.1 Unable to relay for email@example.com
We have 2000 SBS with exchange thta has been working fine.
Today we are not able to receive any email at all. It does not matter who
The sender gets this error message:
Subject: Returned mail: see transcript for details
The original message was received at Thu, 13 May 2004 13:39:48 -0400 (EDT)
from ptd-24-25-191-160.maine.rr.com [18.104.22.168]
----- The following addresses had permanent fatal errors -----
< firstname.lastname@example.org>... >
(reason: 550 5.7.1 Unable to relay for email@example.com>...)
...Outlook 2003 refresh feature
Client is WinXP (Sp1) and OfficePro 2003 outlook (sp1).
Using neither NAT nor firewall. Incoming messages are not
being displayed unless the user clicks on another folder
and back to Inbox (very frustrating, considering the user
gets dozens of messages a day 'cause of the nature of his
I have checked the KB for the problem but I have found
nothing specific about OL2003 and XP.
Other posted messages have either OL2K or XP or some other
combination of OS' but nothing that applies directly to my
Regards and thanks.
Was this one of the articles you read...enter network password in Outlook 2003
Using Outlook 2003. I have my email set up to
SEND/RECEIVE every 5 mins but i keep getting the ENTER
NETWORK PASSWORD / USER NAME dialog box up and its
driving me mad.
All my setting look ok so I cant see why this is
I use btinternet/yahoo as my isp. Have spoken to BT
broadband net help who advise me that they DONT support
PLEASE HELP me to sort this out
Do you have more than one account configured with the same server? Does it
work when you enter your password or does it continue to prompt?
For all Outlook versions on Windows XP (just ignore the par...Problems with Office apps after archive and install
I had to do an archive and install (without preserving users and
network settings) on my G4 (OS 10.2.8), and ever since, I've been
unable to get several Office apps to work correctly.
In Word, I get an error about not being able to open the Visual Basic
Editor, and the custom dictionary being unavailable. In Entourage, I
"do not have write access to the application folder." In Excel,
there's an error accessing the system registry.
I've tried moving things from my previous system folder back into the
current system folder, but it only seems to have made things worse.
A...Outlook 2007 Crashes when opening in Windows 7 64 bit
The computer is new with windows 7. I downloaded Office 2007 standard a month
ago. It has been working fine. Yesterday i was downloading old printer
drivers and my machine took a "critical update" from Microsoft. After that my
Outlook would not open. It would start to open and rthen crash with the error
message "Cannot start Microsoft Outlook. Cannot open the Outlook window." All
other MSD Office programs are working fine. Any suggestions?
I just did a clean install of WinXP Pro SP2 + all updates on a new
harddrive. I then installed Office 2003 and all updates. I then associated
my pst file to the new Outlook install. The PST is 81 MB and I straightened
out the Contacts, so that they come up correctly for new emails. The problem
is...Outlook Today. If I go into customizations and set the checkbox to open
to 'Outlook Today', it seems to save, but as soon as I close and reopen, the
changes are gone. Also, each time I go through these motions, a new incident
of 'Outlook Today' appears under 'Messages'...management reporter installation
Has anyone installed management report yet? Do both application service and
process service have to be installed or are they optional? Thanks, Janey
...Outlook rules wizard replies using From field instead of Reply-To address
This is regarding Outlook 2007 and its rules wizard. We have a mail
folder with hundreds of emails that were sent on behalf of people. So
the "From" and "Reply-To" are different.
We created a rule so that we can reply to all of these people but the
rules wizard onto uses the From filed when it processes the messages
instead of the Reply-To field. This behavior only happens with the
rules wizard, we can go through each email, click reply, and get the
Reply-To address just fine.
I understand there was an article posted by Microsoft about this issue
however it was in 2003. I...Re-Enable CRM User
I am trying to enable a disabled CRM user and I received the following error
message. Any thoughts or suggestions would be greatly appreciated.
String UserId) +0
Microsoft.Crm.Application.Platform.SystemUser.Activate(String id) +38
sender, DataEventArgs e) +127
eventId, FormState state, User user, String objectId,...XP Pro SP3
In a bit of a bind; hoping someone can help me!
I have a laptop here that was not logging in correctly - it would log in
and immediately log out. Drive showed minor failure, so I did a surface
scan and remapped the failing sector. Ran SFC which replaced one file -
still wasn't working.
So I tried a repair install. Normally, this fixes just about any darn
Not this time. On the initial boot afterwards (the black screen with
logo), it just hangs. Power down and reboot, it allows log in, then says
"windows must be activated before you can log in"...RE:Excel will not open from a web link
When opening a link on a web page that has an Excel
Spreadsheet embedded in it, the spreadsheet will not open
up Excel but opens within another browser as an Excel
file. Programming on webpage is correct, opens up on
other machines just fine.
...Debug Error when starting Outlook
I have just installed Office XP and when I try to open Outlook, I get the
following error message:
Programe: C:\Program Files\Microsoft Office\Office10|OUTLOOK.EXE
abnormal program termination
I have tried repair but this doesn't work.
I would appreciate any advise.
There are lot of workaround on this issue.
1. How about other programs - Word, Access etc - is that working?
2. Have you updated all of the patches and service packs?
3. Is OL opening after several attempts?
4. Have installed any Anitspam and Antivirus Program?
5. If yes then Please uninst...Outlook 2000 or XP on Exchange 2003 SBS
it appears that the only way Outlook XP and 2000 users can receive their
emails is when they highlight an email already in their inbox. For instance,
if they are in their Word program and they look into their Outlook, without
highlighting an email on their inbox, it would show that they have not
receive any emails. However, the moment they highlight an email in their
inbox, then they'll receive about 5 emails that appears to have been in some
type of queue. It's obvious that they were in there for quite a while
because of the time that they were sent.
Are these client run...Thanks Ken Wright but one more question RE saving data from circular references
Thanks heaps for that macro Ken Wright .
I have run it and it works.
However it loops forever. Can I set it up so that it could save dat
from a certain number of iterations?
Thanks again Michae
Message posted from http://www.ExcelForum.com
If you stayed within your thread and did not change the subject
Ken would see your reply as a reply to his reply and would see
it a lot faster than when you start a new thread. Ken would
probably see your post highlighted in RED. Also someone other
than Ken might have been able to help you. (not me I avoid
anything that hints of circul...SBS CRM install then move Exchange.
Quick question hopefully.
Just wondering if anyone can clarify what I believe is possible but not 100%
sure. CRM SBS edition installed on a SBS box, can a new Exchange box is
implemented into the same domain and keep e-mail functionality of CRM?? If
it is possible and Exchange is moved off the SBS box and onto a new server,
what needs to be done to ensure it works correctly? Change registy settings
to point to new mail server? have looked and can't seem to locate them...
I have done the following:
-Run Rule Wizard and remove rules from mailboxes (sbs box)
-Un-installed th...Outlook XP keeps asking for password :-(
I have checked and unchecked everything but that little window keeps poping up
for a password (and I check "save password") - even when the emails is rolling in -
so it seems that it don't need the password.
What do I do wrong ?
I have ADSL and written all the informations inc. the password on all 3
Your password is not retained in Outlook 2002 and Outlook Express
OL2002: The Save Password Setting Is Not Saved When You Connect to a POP3
http://support.microsoft.com/default.aspx?sci...Re: exmerge error
I am getting the following error when trying to use exmerg
can anyone please help
Microsoft Exchange Mailbox Merge Program, v4.00.02
Start Logging:February 27, 2004 20:04:3
[20:04:31] Logging Level: Non
[20:04:31] Reading settings from file 'C:\Program Files\Exchsrvr\BIN\EXMERGE.INI'
[20:04:32] Error 8007203a opening an LDAP connection. ('LDAP://EXCHANGE/rootDSE') (CADRoutines::GetNamingContextData
[20:04:32] Accessing Domain Controller 'PROFI...Ron Bovey re: "Trim Selection" in ExcelUtilities
Cells in my Excel spreadsheet appear to be empty. However, when I use
Edit/Go To/Special/Blanks, I get "No cells were found".
In the past, Ron Bovey suggested going to the WWW.APPROS.COM website,
download ExcelUtilities and then use the "Trim Selection" utility to
remove the characters that are making the cells not empty.
Since then, I've gone to the WWW.APPROS.COM website and downloaded the
ASAP Utilities. However, I can seem to find the "Trim Selection" nor
any utility that will do the same thing.
Try going to Rob (not Ron) Bovey's site:
...Outlook 2000 won't remember password #2
I had to reinstall office onto an XP machine, and Outlook 2000 won't
remember the account password. Yes... I have checked the box that says
"remember password." Any ideas? Is this a known problem? Any fixes?
Pete <Pete@nospam.com> wrote:
> I had to reinstall office onto an XP machine, and Outlook 2000 won't
> remember the account password. Yes... I have checked the box that says
> "remember password." Any ideas? Is this a known problem? Any fixes?
<http://support.microsoft.com/search/default.aspx?catalog=LCID%3D1033&1033comm=1&spid=2557&...How do I get invisible lines & borders to re-appear?
In Publisher 2003, table grid lines, text box borders and autoshape borders
have become invisible on-screen, although they do print out. Any ideas on how
to remedy this?
Recently installed Adobe PDF Maker which seems to have precipitated this,
although it could be entirely co-incidental.
Try updating your video drivers.
MVP Microsoft [Publisher]
"Ackerman & Co" <Ackerman & Co@discussions.microsoft.com> wrote in message
> In Publisher 2003, table grid lines, text box borders and auto...Exchange 2003 stops after installing SP1
Two weeks agoe I installed SP1 om Exchange 2003 (running om Win2003
Since the installation it has frozen 4 times.
There are no events, no pre warnings, it just stops sending and
recieving mails, no reaction on mouse and keyboard. Screen is frozen
or just blue.
Any idea would be welcome.
Any time the whole box hangs solid, you usually have a bigger problem than
Exchange. Having applied SP1 may just be a coincidence.
Make sure you are running the latest device driver updates, firmware
updates, etc. for all of your hardware. Run full hardware diagnostics on