I would like to ask if the fax activity can be connected to any fax server
and send fax automatically or if its just a static module for recording faxes
...Always sending a message (even when there isnt one to send)
For some reason, ever since I clicked on the option to
send a receipt to a person via Outlook, my Outlook ALWAYS
says "Sending Message 1 of 1" even when there is no email
in the 'Outbox.' Does anyone know how to solve this
problem? I have tried using the repair utility and
I have a similar problem but one of my outbound receipts
is mal-formed and causing send mail problems.
Need to remove the reciept from the outbound queue. How?
Sounds like you have one stuck as well. After a
successful transmition there should not be any messages
...Using workflow manager to send email
I have an entity called sales rep which is linked to the store. I want to do
a workflow which sends an email out to the sales rep 1 minute after the lead
is created. however i have done the template bit and when i try to create a
workflow i dont get the option to use the to field from the sales rep entity.
Can anyone please advice me how to go about this
...Cannot send newsgroup post with an attachment
I can send and receive posts using Outlook Express 6 newsgroups. I do not
use html. When I send a post that has an attachment, e.g. a 160kB jpg that
post never shows up as having been sent.
How can I fix this?
I can't speak for others, but msnews has a 100KB limit. If I have a need
to post a graphic, I upload it to TinyPic and post the link to it.
Imperial Beach, CA
"news.microsoft.com" <email@example.com> wrote in message ...Send/recieve error...
I am curently having a problem whereby when I press the send/reciev
button for incoming and outgoing emails, it always pops up an error o
something object not found...?!
I used Outlook XP and using IMAP email account...
Any help would be greatly appreciated....
~~ Message posted from http://www.ExcelTip.com
~~View and post usenet messages directly from http://www.ExcelForum.com
See if http://support.microsoft.com/default.aspx?scid=kb;en-us;312354 helps.
This posting is provided...Exchange 5.5 (latest SP and hotfixes) and Outlook 2k and 2003 Send/Receive Issue
I am running Exchange 5.5 Standard with latest of everything. My clients
are running either 2k or 2003, most being 2k. I have an issue with all
clients when sending receiving e-mail. Mail is no longer instantly sent or
received. Mail sent stays in the Outbox until I change folders or click on
a different e-mail message. Same way with receiving mail. People will have
Outlook open and sitting in Inbox. If they don't move around no messages
come in. But the moment they select a new folder/e-mail, etc. a slew of
messages come in.
What is the problem and how do I correct?
When I used the PC version of office, and I wanted to add an
application to the Send to list in the file menu, all I would need do
is open the send to folder, and drop a shortcut to that application. I
can not seem to find a folder with such a name - does anyone know how
to add things to the send to list?
G4 467mhz 1.25GB ram
OS X 10.3.5
The box said Windows 95 or better, so I bought a Macintosh!
Jonathan Zanger <firstname.lastname@example.org> wrote:
> When I used the PC version of office, and I wanted to add an
> application to the Send to list in the file menu, all ...Problem sending commands to the program in Word 2007
When I try to access Word files in an external drive I cannot get them. A
note indicates that tere is a problem sending commands to prgoram.
Don't even try! Opening files from an external or removable drive or saving
them to such a drive is one of the top three causes of file corruption.
Instead, copy the file to your hard drive and work on it from there.
Suzanne S. Barnhill
Microsoft MVP (Word)
Words into Type
Fairhope, Alabama USA
"RolandoQ" <RolandoQ@discussions.microsoft.com> wrote in message
news:0F2E4FAD-240D-4C3C-88C1-481...Entourage 2008 WSE 13.0.4 won't send invites
Operating System: Mac OS X 10.6 (Snow Leopard)
I cannot send any calendar invites through any of my email accounts either from my Entourage calendar or the office Exchange calendar. Invites are created in the calendar, but are never sent.
This is a multi-part message in MIME format.
What happen when you click on send? Are you getting any error? Is your =
email working fine?
i am about to program a server/client app - i am already able to send and
receive data either on the server side and on the client side.
the only thing i am not able to do is to request and receive data within one
function on the client side - for example i'd like to update user
information on the client side by calling "UpdateUserData" which sends a
request to the server and should receive the updated data.
the client receives the requested data after finishing the function - which
is too late for my intention...
so i guess i need to implement the client socket in an extra...cannot send new mail from Outlook 2002
After doing a Microsoft update from the support site, my
Outlook 2002 changed!!! When I click "new" to send a new
email message, I no longer have the option of
checking "Mail Message." It's gone! I also am unable to
get on the Internet. I am on a small Windows 2003
network, and we are all connected via LAN. I can get on
the file server and read and send email, but I have
uninstalled and installed Outlook at least 5 times, as
well as the whole Office 2000 Suite several times.
Yes, this really sounds strange. Has anyone heard of
this? I think it has somet...Send shift-a key to an other application
My question is simple. How can I send a shift-a key message to an other
application so it modifies the keyboard state? I tried simple messaging with
PostMessage() and SendMessage(). I tried AttachThreadInput() to join the
process to access the keyboard state but without any success. I really need
a solution that can send key to an application with the screen locked so
Is there any win32/mfc specialists?
"Julie" <email@example.com> wrote in message
> My question is simple. How can I ...outlook '03
receiving all emails, but outbound emails not being
received by anyone even though emails going into "sent"
queue and appears to have been sent. using norton 2004
internet security. please help??
Does it work when you disable NIS? (for troubleshooting purpose only)
Robert Sparnaaij [MVP-Outlook]
Tips of the month:
-Backup and Restore
-Create an Office XP CD slipstreamed with Service Pack 3
"chandra" <firstname.lastname@example.org> wrote in message
> receiving all emails, bu...very odd problem with "send as"
hi everyone. im in the middle of an AD/Exchange 2000 to AD/Exchange 2003
migration and im using Quest migration manager (if that matters) to
facilitate the migration and keep the source and target domains in synch
during the process. here is the problem: lets say i have 10 users in the
source domain and in addition to their own mailboxes they also share a
common mailbox between them all. they can all open the mailbox and send mail
FROM the mailbox. important note: they dont "send on behalf" of the mailbox,
they "send AS" from the mailbox. the difference is that with ...Can't send e-mail anymore just receive.. Arggghhh.....
For some reason my Outlook 2002 decided to quite sending mail. I can
receive mail but when I try to send it I get the message below over
and over... I know the SMTP address in the mailbox setup is still
correct so what gives? I can post to newsgroups obviously....
Thanks in advance!!
Task 'Temujin Sending' reported error (0x800CCC0F) : 'The connection
to the server was interrupted. If this problem continues, contact
your server administrator or Internet service provider (ISP).'
Is this question too hard or something? Maybe I'll go ask the fifteen
year old down the st...Sending delivery reports
My main e-mail address is email@example.com which I
use when mailing from home. I have another account with
NTL. When I receive a mail on my BT account which asks
for a receipt it and I'm using my NTL account I am unable
to send that receipt.
If anyone knows haow to resolve this problem I would be
...How can I create one mail that can send several times to many peop
Maybe my question is stupid, but I'm new to Outlook. I would like to send
one mail to many people (not in one go) without having to retype the mail. I
downloaded templates from Microsoft website but I don't know how I can change
the text and save it.
Anyone can help me?
> Maybe my question is stupid, but I'm new to Outlook. I would like to
> send one mail to many people (not in one go) without having to retype
> the mail. I downloaded templates from Microsoft website but I don't
> know how I can change the text and ...OL2002 Send/Receive Hangs
When I try to Send/Receive in Outlook 2002 on English XP,
Outlook will just hang and hog the CPU and I then have to
reboot the machine.
There are no error messages. The Send/Receive window
comes up and it does try to send/retrieve messages, but
never goes anywhere. I have reinstalled Office XP, run
scanpst.exe, ran Detect and Repair and nothing has
worked. I also ran a virus scanner to no avail.
I haven't installed any new applications and have not
changed any of the pop account settings. ANY IDEAS?
When you test the account settings, do you get an error mess...How to create/ send a consolidated report
Hi, I hope you can help me. I'm trying to create a consolidated pending tasks
report that the manager receives. Otherwise, i'll clog my manager’s in box
with dozens of these warnings. Hope anyone gives me a clue. Thanks
We have proposed a solution to our client to generate alerts for the open
task, if you are interested please drop a email to discuss.
> Hi, I hope you can help me. I'm trying to create a consolidated pending tasks
> report that the manager receives. Otherwise, i'...Can't Send/Receive Mail
Error Message Reads: The connection to the server has failed. Subject
'Test', Account: 'HOME', Server: 'smpt.live.com', Protocol: SMTP, Port: 25,
Secure(SSL): No, Socket Error: 10060, Error Number: 0x800CCC0E
Double-check the settings.
You have: smpt.live.com
Should be: smtp.live.com
"KD4887" <KD4887@discussions.microsoft.com> wrote in message
> Error Message Reads: The connection to the server has failed. Subject
> 'Test', Account: 'HOME', Server: '...Send as group in Exchange 5.5
I have a customer that had groups set up where the "From" field shows the
group address when one of the members sends an e-mail. For example, they
have a group of users called "Exec Admin." When one of the members sends a
message, the message displays that it's from the "Exec Admin" group. Can
anyone tell me how this is set up? The administrator made a change to one of
the users and this no longer works for the whole group. I need to go and
help them troubleshoot, but I'm not even sure how this is configured.
Give them Send As permissi...How to prevent sending mail outside the organisation
I need to create a group of users in my exchange 2000 organisation that
should not be able to send mail outside the organisation.
How can I do that
Thanks in advance
mcse 2000 - mcsa 2003 and still a lot to learn...
Create group for that, populate it with accounts, put that group in
Admin groups, "Admin group name", Connectors, Internet Mail SMTP
connector properties, Delivery Restrictions and Add that group in
"Reject messages from".
emmanuel meurant wrote:
> I need to create a group of users in my exchange 2000 organisation that
> should not be able t...send outgoing mail to outside organization??
Is there anything I could do to solve the problem when I try to send a mail
where the e-mail address is outside of the organization to another domain,
like send to other company and the e-mail address is not in the Active
Directory, like contact ?
If I send this kind of mail, it send to the administrator mail account of
the domain rather than the e-mail address mention. But when I send a contact
I have created in Active Directory, it delivers properly to the destination.
Is that any solution to solve the problem, or I need to add every contact
which is need to send in AD? Thanks a lot...send to button greyed out #2
We have a single user client that can't mail documents in GP (either text or
pdf). We have reinstalled Adobe Pro thinking it was an adobe issue, but GP
is not recognizing mail to send either text or pdf. This client needs to
mail RM statements and so this feature does not work either. This client has
two mail profiles, but it appears to be recognizing a default profile. We
have reinstalled GP but no luck. This is our only client using full CRM with
outlook. Here are the pertinent versions: CRM 4 (rollup 5) Outlook 2007 SP
2, GP 10 10.00.1237(2008 Payroll year end). Any sugge...Allowing other applicaitons to send e-mail
I am a novice Microsoft Access programmer and I have some code that sends an
e-mail with some attachments. This all works fine however every e-mail is
prompted with an Outlook message asking me if I want to allow the e-mail to
be sent by another programme.
I know there is ClickYesPro freeware to overcome this however I am on a
corporate network and the powers that be will not let me install this.
Is there a way to change the Outlook settings to allow specific applicaitons
to send e-mails without the warning?
If I need to code Outlook then I will have a go!