pop and smtp errors unique to machine

I'm using windows xp home and i'm running into pop and smtp errors using
outlook. i've verified on another machine that the account works and the
settings i'm using are correct. when i try "test account settings" for the
account using outlook the "log on to pop" fails and the "send test e-mail"
fails. i've also tried using outlook express and i get the following pop
error:

The connection to the server has failed. Account: 'pop.cogeco.ca', Server:
'pop.cogeco.ca', Protocol: POP3, Port: 110, Secure(SSL): No, Socket Error:
10061, Error Number: 0x800CCC0E

i've scanned for spyware using spybot and it comes up clean. any ideas?
thanks for the help

gary

-- 
Gary Roach
ADB Services


0
jgroach (5)
6/5/2004 1:07:34 PM
outlook 87535 articles. 10 followers. Follow

4 Replies
590 Views

Similar Articles

[PageSpeed] 45

Are you *absolutely* sure the account is configured correctly?

See your ISP's help site. I see the doc 
http://www.cogeco.ca/files/pdf/userguides_on/internet/Add_email_account_Outlook6.pdf 
which suggests that you should not be using Secure SSL, yet the error 
message below suggests that you have set it?

Hope this is useful to you.  Let us know.

rms




Gary Roach wrote:
> I'm using windows xp home and i'm running into pop and smtp errors using
> outlook. i've verified on another machine that the account works and the
> settings i'm using are correct. when i try "test account settings" for the
> account using outlook the "log on to pop" fails and the "send test e-mail"
> fails. i've also tried using outlook express and i get the following pop
> error:
> 
> The connection to the server has failed. Account: 'pop.cogeco.ca', Server:
> 'pop.cogeco.ca', Protocol: POP3, Port: 110, Secure(SSL): No, Socket Error:
> 10061, Error Number: 0x800CCC0E
> 
> i've scanned for spyware using spybot and it comes up clean. any ideas?
> thanks for the help
> 
> gary
> 
0
rmschne1 (174)
6/5/2004 1:37:56 PM
His post doesn't indicate the client is trying SSL.  (See the line Secure
(SSL):No)  What he is getting is a socket error.  Look for things that would
prohibit a connection.  These things could be something like...

1) Client uses the MS proxy client and needs to set a rule in the client
configuration file to allow port 110 and 25.

2) User may not have a valid ip configuration for his environment. (e.g.
check network configuration)

3) personal firewall may be blocking the application from opening a port

4) corporate firewall may be blocking the host from reaching the pop/smtp
server  (this one is easy to check for.  open a command prompt and type
netstat -n when doing a send/receive.  if you see a SYN_SENT next to the IP
address that represents the POP/SMTP server, then there is a device on the
network that is prohibiting the connection.)

"Rob Schneider" <rmschne@removetheones_b1e1e1b.net.net> wrote in message
news:%23KIPQJwSEHA.1472@TK2MSFTNGP09.phx.gbl...
> Are you *absolutely* sure the account is configured correctly?
>
> See your ISP's help site. I see the doc
>
http://www.cogeco.ca/files/pdf/userguides_on/internet/Add_email_account_Outlook6.pdf
> which suggests that you should not be using Secure SSL, yet the error
> message below suggests that you have set it?
>
> Hope this is useful to you.  Let us know.
>
> rms
>
>
>
>
> Gary Roach wrote:
> > I'm using windows xp home and i'm running into pop and smtp errors using
> > outlook. i've verified on another machine that the account works and the
> > settings i'm using are correct. when i try "test account settings" for
the
> > account using outlook the "log on to pop" fails and the "send test
e-mail"
> > fails. i've also tried using outlook express and i get the following pop
> > error:
> >
> > The connection to the server has failed. Account: 'pop.cogeco.ca',
Server:
> > 'pop.cogeco.ca', Protocol: POP3, Port: 110, Secure(SSL): No, Socket
Error:
> > 10061, Error Number: 0x800CCC0E
> >
> > i've scanned for spyware using spybot and it comes up clean. any ideas?
> > thanks for the help
> >
> > gary
> >


0
neoheart (690)
6/5/2004 1:52:21 PM
good catch.  I read it more than once, and read it wrong each time. 
Have another cup of coffee, I guess.  :-)




neo [mvp outlook] wrote:
> His post doesn't indicate the client is trying SSL.  (See the line Secure
> (SSL):No)  What he is getting is a socket error.  Look for things that would
> prohibit a connection.  These things could be something like...
> 
> 1) Client uses the MS proxy client and needs to set a rule in the client
> configuration file to allow port 110 and 25.
> 
> 2) User may not have a valid ip configuration for his environment. (e.g.
> check network configuration)
> 
> 3) personal firewall may be blocking the application from opening a port
> 
> 4) corporate firewall may be blocking the host from reaching the pop/smtp
> server  (this one is easy to check for.  open a command prompt and type
> netstat -n when doing a send/receive.  if you see a SYN_SENT next to the IP
> address that represents the POP/SMTP server, then there is a device on the
> network that is prohibiting the connection.)
> 
> "Rob Schneider" <rmschne@removetheones_b1e1e1b.net.net> wrote in message
> news:%23KIPQJwSEHA.1472@TK2MSFTNGP09.phx.gbl...
> 
>>Are you *absolutely* sure the account is configured correctly?
>>
>>See your ISP's help site. I see the doc
>>
> 
> http://www.cogeco.ca/files/pdf/userguides_on/internet/Add_email_account_Outlook6.pdf
> 
>>which suggests that you should not be using Secure SSL, yet the error
>>message below suggests that you have set it?
>>
>>Hope this is useful to you.  Let us know.
>>
>>rms
>>
>>
>>
>>
>>Gary Roach wrote:
>>
>>>I'm using windows xp home and i'm running into pop and smtp errors using
>>>outlook. i've verified on another machine that the account works and the
>>>settings i'm using are correct. when i try "test account settings" for
> 
> the
> 
>>>account using outlook the "log on to pop" fails and the "send test
> 
> e-mail"
> 
>>>fails. i've also tried using outlook express and i get the following pop
>>>error:
>>>
>>>The connection to the server has failed. Account: 'pop.cogeco.ca',
> 
> Server:
> 
>>>'pop.cogeco.ca', Protocol: POP3, Port: 110, Secure(SSL): No, Socket
> 
> Error:
> 
>>>10061, Error Number: 0x800CCC0E
>>>
>>>i've scanned for spyware using spybot and it comes up clean. any ideas?
>>>thanks for the help
>>>
>>>gary
>>>
> 
> 
> 
0
rmschne1 (174)
6/5/2004 2:12:26 PM
thanks for the help - i don't know what the problem was but it mysteriously
went away (even though it had originally persisted over several days and
reboots).


"neo [mvp outlook]" <neoheart@remove-heart.mvps.org> wrote in message
news:uV4uTRwSEHA.1048@tk2msftngp13.phx.gbl...
> His post doesn't indicate the client is trying SSL.  (See the line Secure
> (SSL):No)  What he is getting is a socket error.  Look for things that
would
> prohibit a connection.  These things could be something like...
>
> 1) Client uses the MS proxy client and needs to set a rule in the client
> configuration file to allow port 110 and 25.
>
> 2) User may not have a valid ip configuration for his environment. (e.g.
> check network configuration)
>
> 3) personal firewall may be blocking the application from opening a port
>
> 4) corporate firewall may be blocking the host from reaching the pop/smtp
> server  (this one is easy to check for.  open a command prompt and type
> netstat -n when doing a send/receive.  if you see a SYN_SENT next to the
IP
> address that represents the POP/SMTP server, then there is a device on the
> network that is prohibiting the connection.)
>
> "Rob Schneider" <rmschne@removetheones_b1e1e1b.net.net> wrote in message
> news:%23KIPQJwSEHA.1472@TK2MSFTNGP09.phx.gbl...
> > Are you *absolutely* sure the account is configured correctly?
> >
> > See your ISP's help site. I see the doc
> >
>
http://www.cogeco.ca/files/pdf/userguides_on/internet/Add_email_account_Outlook6.pdf
> > which suggests that you should not be using Secure SSL, yet the error
> > message below suggests that you have set it?
> >
> > Hope this is useful to you.  Let us know.
> >
> > rms
> >
> >
> >
> >
> > Gary Roach wrote:
> > > I'm using windows xp home and i'm running into pop and smtp errors
using
> > > outlook. i've verified on another machine that the account works and
the
> > > settings i'm using are correct. when i try "test account settings" for
> the
> > > account using outlook the "log on to pop" fails and the "send test
> e-mail"
> > > fails. i've also tried using outlook express and i get the following
pop
> > > error:
> > >
> > > The connection to the server has failed. Account: 'pop.cogeco.ca',
> Server:
> > > 'pop.cogeco.ca', Protocol: POP3, Port: 110, Secure(SSL): No, Socket
> Error:
> > > 10061, Error Number: 0x800CCC0E
> > >
> > > i've scanned for spyware using spybot and it comes up clean. any
ideas?
> > > thanks for the help
> > >
> > > gary
> > >
>
>


0
jgroach (5)
6/5/2004 11:31:31 PM
Reply:

Similar Artilces:

errore after restoring
hi there i have a big problem with restoring the database for my company every thing seems good but when accessing the transaction entry or the gl (transaction menu--> financial--> .......) (transaction menu--> inventory--> .......) i got this error message:- (all call stacks are in use .cannot start script) and (a get/change first operation on table 'coCustomlinks' cannot find the table) detailed information [Microsoft][ODBC SQL Server Driver][SQL Server]Could not find stored procedure 'zDP_SY01201F_1'. [Microsoft][ODBC SQL Server Driver][SQL Server]Invalid o...

Error Message Exiting Outlook
I keep getting an error message when exiting Outlook 2002. It says "Microsoft Visual Basic" in the title bar and the text says "Compile error in hiddne module: AutoExit". What's causing that? I don't use Outlook for email, but had to set up an account to be able to change the store folder to link to my previous files saved on another drive. I don't know if that has anything to do with it... ...

Workflow generated pop-up messages
I'm using CRM3.0. I would like to know if it's possible from within workflow code (using c# code) to trigger a message (dialog box) back to the web client. So for example if a field is null, display a pop-up message dialog back to the web client such as: "You must enter a Search name before proceeding" I know it's possible to perform validation from within Workflow manager, however the workflow Manager as far as I know, cannot send dialog box pop-up messages back to a Web client. Note that using client side scripting event triggers is not suitable in this situation, ...

How to Restrict Outbound SMTP for Specific User
I have users that I want to restrict from emailing external to the company but allow internal email. Found article 244008 but it was for Ex5.5. I applied the same fix but email still went out. Basic steps were: Internet Mail SMTP Connector, Properties, Delivery Restrictions, Reject Messages From, Add. Should this work or am I missing something? Hi Shawn Here is a link that should help: http://www.msexchange.org/tutorials/MF009.html Make sure you make the Registry change as detailed in the notes section. -- Mark Fugatt Microsoft Limited This posting is provided "AS IS" w...

Unexpected MAPI error
Can't get my Outlook clients to connect...rebooted Exchange '03 server and get the following error in Event Viewer: An unexpected MAPI error occurred (0x80004005) Error translate something about more than one instance of EventConfig_ServerName folder. But when I open the system folders in the public folder I don't see any duplicated folders. All Exchange services appear to be running normalls. Not sure what's next, any help out there?! tks, steve ...

Error: The root element is missing
After publishing a customization I cannot open any objects (contact, account, lead etc). The object popup-window shows Error. I can click around in the system but not open up any objects or create new. I have tried to import an old customization and iisreset etc but without any result. I turned on the more extensive error message in the web.config file. This is the result: Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Detail...

some type of pop up blocker
When i try to access certain areas of CRM 3.0, there is some type of pop up blocker or something that will not let the next window open. I have disabled my pop up blocker but it still occurs. When i put the mouse pointer in front of the pop up blocker message, it states no pop ups were blocked. Some have worked by holding down ctrl or alt but others will not open the new window. Any ideas or suggestions? MT - if you have any toolbars installed in IE (google, MSN, yahoo, etc) uninstall them. there are lots of reported cases where disabling them isn't good enough, you need to un...

ERROR 2349 #2
I had a crash and had to reinstall MO 2000. It comes up with an error 2349 and won't continue installing. Any ideas? OFF2000: You Receive an "Error 2349" Error Message During Installation http://support.microsoft.com/default.aspx?scid=kb;en-us;302399 OFF2000: Error Message: Internal Error 2349: Copy Resumed with Different Info http://support.microsoft.com/default.aspx?scid=kb;en-us;329386 -- Mary Sauer MS MVP http://office.microsoft.com/ http://www.msauer.mvps.org/ news://msnews.microsoft.com "MISH" <anonymous@discussions.microsoft.com> wrote in message news:...

Error :XML not defined
This is a multi-part message in MIME format. ------=_NextPart_000_000D_01C60F1B.FCDBE180 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable I am trying to imput data in too a xml file. How can it deal with the = issues below I try putting in System.XML to see but it give me a error about only = having one inherits per class. Partial Class _xxxx Inherits Web.UI.Page Protected Sub btnSubmit_Click(ByVal sender As Object, ByVal e As = System.EventArgs) Handles btnSubmit.Click Dim xDoc As New XmlDocument Dim newComment As XmlDocumentFra...

error while responding via Internet email
When i respond ( via Internet email /POP3 and SMTP) to emails which were earlier downloaded on my LAN in office i get the emails bounced back. When i right click on the display name i get the following error. " The name or distribution list has been deleted and is no longer a valid Address Book entry. The item could not be found". If i down load email using POP3 and respond ( via SMTP) then i do not get any emails bounced back. Any clues why this is happening? I have Exchange 5.5 server. I get this error on Outlook 2000 as well as Outlook 2003 Thanks in advance. Regards Sunil ...

XML Parser Error: XML document must have a top level element 08-12-03
Hi all, I'm getting this messagen when trying to create some instance of any instance. Does anyone knows what's goin'on ? Thanks, Hugo ...

SMTP error to one specific domain
Server 2003 Exchange server 2003 Error below when sending to one particular email The connection was dropped due to an SMTP protocol event sink. STapley wrote: > Server 2003 > Exchange server 2003 > Error below when sending to one particular email > > The connection was dropped due to an SMTP protocol event sink. If you do not have any protocol sinks, then it must be them. Can we see full unedited NDR? -- If my message is helpful, please help me by registering at www.openoffice.org and voting for the following issues: http://www.openoffice.org/issues/show_bug.cgi?id=490...

Email error message
Am getting following message when trying to send emails and emails will not send: An unknown error has occurred. Subject 'test', Account: 'POP3.LIVE.COM', Server: 'SMTP.LIVE.COM', Protocol: SMTP, Server Response: '550 5.3.4 Requested action not taken; This account is currently blocked from sending messages. If you don't think you've violated the Windows Live Terms of Use, please contact customer support.', Port: 25, Secure(SSL): Yes, Server Error: 550, Error Number: 0x800CCC69 Can anyone help? Also I keep getting a message that there...

OWA 2003 Forms Based Auth Not loading, HTTP 500 Error
I had a exchange 2003 on win 2000 Server working fine, I just moved over the mailboxes to a windows 2003. Now I can't seem to get Forms to come up at all. I install a certificate created by the windows 2000 Server. I get all the other screen but once it get's past the, accept certificate screen, I get an internal error, Http 500 Regular login works fine without the certifcate and I believe with as well. Any help on this? ...

pop sound !
I get a pop sound and I checked to find its a "system notification" well nothing shows up on the screen so where can I check to see what its trying to notify me of ? sixpack wrote: > I get a pop sound and I checked to find its a "system notification" > well nothing shows up on the screen so where can I check to see > what its trying to notify me of ? How did you find it was a 'system notification'? -- Shenan Stanley MS-MVP -- How To Ask Questions The Smart Way http://www.catb.org/~esr/faqs/smart-questions.html So are you te...

LNK2019 error when trying to export class from dll
I am creating a DLL using MS VStudio C++ 2003. I have created a class in the DLL that I am wanting to export. Everything compiles with the exception of getting a linker error 2019 related to the constructor and destructor. I have 2 functions that are not a part of the class that are exported, one that returns a pointer to the class and the other which destroys the object. I have defined DLL_EXPORTS in the project settings- >preprocessor. Can someone Tell me what the problem is? I am posting the header file below along iwth the source. any help is greatly appreciated. BTW...I am new...

"A communication error occurred" error message
Help! I've tried everything I know... version: MS Money 2005, v14.0.125.1105 (latest one) Problem: When trying to import an .ofx file into my account, I get the stupid "A communication error occurred. Please try your call again. If you continue to have problems call your financial institution's Online Services Customer Support." "Please try your call again?" Please! What kind of error message is this when it's not applicable to what I'm trying to do! Anyway... Details: - The last time I updated the account was on 3/20, so until then, I was able to ...

OWA Error #13
Hi, i have problem with OWA in Internet Explorer, any other web browser works just fine. I can connect to my mailbox and can see message in splited window, can send a message. When i try to open message in another window i receive an 500 Internal server error. I have turned off frendly error messages but error is the same. Same thing with attachments, i can't open it. It is very strange for me that Microsoft product works with any ather then Microsoft??? Please help BR AdboS "adbos" <allemagnus@wp.pl> wrote in news:d6i5nt$bac$1@inews.gazeta.pl: > Hi, > i have prob...

Changing ex2003 public store SMTP address
I have recently been required to change the SMTP address that one of our public folder stores use. I have changed the primary SMTP address of the store a few days ago and from what I can tell it is still sending out mail (replication) as the old address and getting mail destined to the old address. What do I need to do in order to get the public store to use the new SMTP address for replication? Best regards, Steven On Tue, 15 Nov 2005 11:33:33 -0800, "Steven" <spresley@qualcomm.com> wrote: >I have recently been required to change the SMTP address that one of ou...

error on second pass of loop.
What I am trying to do is find the total amount of time my site goes down. It all works when there is only one error in a row, but when it enters the loop it crashes on it's second pass. Any Suggestions? Sub Total() Dim ObjErrorString, ObjOkString Dim ObjErrorCell, ObjErrorTime Dim ObjOkCell, ObjOkTime Dim ObjTotal Set ObjErrorCell = Cells.Find(What:="ERROR", After:=ActiveCell, SearchOrder:=xlByColumns, SearchDirection:=xlNext) ObjErrorString = Left(ObjErrorCell.Offset(1, 0).Value, 5) Do Until ObjErrorString <> "ERROR" Ob...

Integration Manager Error
I am trying to use an integration to pull payroll hours into GP10. The integration works sometimes, but with some data I get the error "Cannot open any more tables". The particular integration that fails should be creating 4 payroll transaction batches, but it is only creating 3 with the fourth one failing with this error. All of the data for the four batches are similar except the dates are in different weeks for each batch. Can anyone give me an idea as to what would cause this error and where to look? More information, the original data is in a CSV file. Access conn...

Store Operations Business Rules Error
I am having a problem with POS registers recently. Since the last 3 days, when the cashiers log-in to the POS in the morning, the system does not allow them entry (after a minute freeze) and displays the following error message: Store Operations Business Rules ! Error # -2147217871 Timeout expired (Source: Microsoft OLE DP Provide for SQL Server) (Native Error:0) No Help File Available UPDATECashier SET Failed logon Attempts=0 WHERE Number =? When I click on ��OK�� then I get the following message: X Server Failure 135 A server failure occurred while attempting to read Cashier Error #...

Opening a form from a Pop-up
I have a pop-up form I have created so that instructors can double-click on a user number and a New Student form is supposed to open. I have done several pop-up boxes to open other forms and they all seem to work just fine. However, on this particular pop-up, when I double-click a number, I get the following error message "The specified field '[UserNumber]" could refer to more than one table listed in the FROM clause of your SQL statement." I am using a query to draw the information and there is only one table being used in the query. When I check the SQL statemen...

Calculate and display individual error bars for individual points
Generally error bars (standard deviations) vary point-by-point in a graph depending on the distribution of individual values for each point. Excel can calculate these separate standard deviations, but there appears to be no way to display them in a graph. Has anyone found a way around this? ---------------- This post is a suggestion for Microsoft, and Microsoft responds to the suggestions with the most votes. To vote for this suggestion, click the "I Agree" button in the message pane. If you do not see the button, follow this link to open the suggestion in the Microsoft Web-...

Error Message #4
can someone give me some help with this error message, 'table security violation', the user has access to SOP, this error message is intermittent. Check if the user has security at the table level denied to any tables. Table level security is checked when printing reports. You must have access to all tables linked to a report to be able to print the report. David Musgrave [MSFT] Senior Development Consultant Escalation Engineer - Great Plains Microsoft Dynamics Support - Asia Pacific Microsoft Dynamics (formerly Microsoft Business Solutions) http://www.microsoft.com/Dynamics m...