Mystery Calender Filter

I've got two different users Active Sync'ing their Treo 700w phones with 
Exchange 2003 mailboxes over the air.  All works fine except when an 
appointment is made in the handheld calendar, it doesn't appear on the 
desktop Outlook Calendar.  Shows up in OWA and time alerts fire off just 
fine in both Outlook and OWA - you can even go to the event in Outlook. 
There must be some filter applied to Outlook, except when I go to:
View -> Arrange by ->Current View -> Customize -- Filters are reported as 
off.

Is there another place to be looking where some filter may be being applied 
that I don't know about?
This is happening to two different users at the same time - so I'm doubting 
there is any user settings involved - though they do work together so it is 
a possibility...

Could Symantec AV-CE 10 be involved in this somehow?

Any help is totally appreciated! 


0
Joseph
4/28/2007 9:10:06 PM
outlook 87536 articles. 10 followers. Follow

2 Replies
167 Views

Similar Articles

[PageSpeed] 22

Joseph O <.> wrote:

> I've got two different users Active Sync'ing their Treo 700w phones
> with Exchange 2003 mailboxes over the air.  All works fine except
> when an appointment is made in the handheld calendar, it doesn't
> appear on the desktop Outlook Calendar.  Shows up in OWA and time
> alerts fire off just fine in both Outlook and OWA - you can even go
> to the event in Outlook. There must be some filter applied to
> Outlook, except when I go to: 
> View -> Arrange by ->Current View -> Customize -- Filters are
> reported as off.

Try resetting the foldr's view to its default.
-- 
Brian Tillman
0
tillman1952 (16053)
4/29/2007 7:01:04 PM
Tried that - even added the /cleanview switch at the launch command prompt.
Still no good.  Any other ideas?  Is there anyone else running a Treo with 
this problem?

"Brian Tillman" <tillman1952@yahoo.com> wrote in message 
news:e5U%23ODpiHHA.2408@TK2MSFTNGP02.phx.gbl...
> Joseph O <.> wrote:
>
>> I've got two different users Active Sync'ing their Treo 700w phones
>> with Exchange 2003 mailboxes over the air.  All works fine except
>> when an appointment is made in the handheld calendar, it doesn't
>> appear on the desktop Outlook Calendar.  Shows up in OWA and time
>> alerts fire off just fine in both Outlook and OWA - you can even go
>> to the event in Outlook. There must be some filter applied to
>> Outlook, except when I go to: View -> Arrange by ->Current View -> 
>> Customize -- Filters are
>> reported as off.
>
> Try resetting the foldr's view to its default.
> -- 
> Brian Tillman 


0
Joseph
5/1/2007 8:00:43 PM
Reply:

Similar Artilces:

IF COUNTIF & COUNTA on Filtered Visible Cells #7
Hi Frank, Hope this will help. Correction to Last Posting: My Helper Column "U" increments one Row at a time and says: Check from Row above Current Row back to beginning of my "V" Range: i the Room was used previously give me the Last (MAX) time it was used b returning the relevant Row Number of the (text based) Group Nam (Executive, Trainees, Manager, Graphics, etc.) that used the Room Last The Helper Column "U" then passes this data to the Formula in Colum "T" - it checks for the criteria within the specified Range and doe the COUNT calculation us...

Calculations in filtered columns
Is there any way to perform an advanced filter on columns with calculations in them and copy the data with calculations to another location.? It copies the extracted data as values only. Thanks With the filtered data selected press CTL+G, special, visible cells only, CTRL + C, go to where you want to copy the information, paste special, values "Dianeg" wrote: > Is there any way to perform an advanced filter on columns with calculations > in them and copy the data with calculations to another location.? It copies > the extracted data as values only. >...

Junk Filter 1024 size limit?
I get an error on OWA 2003 when I try to add additional entires to my Block Senders List, that I am over the size limit allocated at the server level - Contact your Admin. My question is: How and where do I increase this limit? thanks! V2l0aCBhIHByb3BlciBBbnRpU1BBTSBTb2x1dGlvbi4gOy0pIA0KSnVzdCBnb29nbGUgZm9yIGl0 LiBNYXliZSB5b3UgZXZlbiBmaW5kIHNvbHV0aW9ucyB3aGljaCBzdXBwb3J0IG5ldyB0ZWNobm9s b2dpZXMgbGlrZSBTUEYgYW5kIENhbGxlcklELg0KQW5kcmVhcw0KDQoiQmVybmQiIDxiZGlibGlr QHNvbGJvdXJuZS5jb20+IHdyb3RlIGluIG1lc3NhZ2UgbmV3czoxOUYwRjI4Ni01ODk5LTRBQTYt QjFEOS02MjAxQjExNTJCMjJAbWljcm9zb2Z0LmNvbS4uLg0KPiBJI...

Mystery Formula
The reference below is in an entire column of cells. The cell C7 is a number (14,000) that appears to be a constant multiplier for the entire column. I'm trying to find out what the , in front of the cell reference signifies, and what "TABLE" is being referenced. Thanks! {=TABLE(,C7)} ** Posted via: http://www.ozgrid.com Excel Templates, Training, Add-ins & Software! http://www.ozgrid.com/Services/excel-software-categories.htm ** Mike Polo wrote... > The reference below is in an entire column of cells. The cell C7 is a > number (14,000) that appears to be a constant...

Changing Calender Format
I am new to Outlook 2007. The bubbles around the appointments in the the on-screen month version of the day/week/month view consume a lot of space. at the default 8 point font, 3 appointments are the maximun that will show up on within the box for a day. The 2003 format (without bubbles) allowed more appointments to show for the same screen space. Does anyone know how to turn the bubbles off? ...

Select nodes by filter
Hello! I've got following XML structure <ROOT> <DATASET> <ID>1</ID> <VALUE>Test1</VALUE> </DATASET> <DATASET> <ID>2</ID> <VALUE>Test2</VALUE> </DATASET> <DATASET> <ID>3</ID> <VALUE>Test3</VALUE> </DATASET> </ROOT> I want to select all dataset nodes having a certain id value. SelectNodes will give me a collection of ALL dataset nodes. I need something like SelectNodesByFilter("ROOT/DATASET", "ID < 3") D...

Service Calender Views
We have several locations using CRM and would like to be able to isolate the service calender views to the specific locations. Is there any way to do that? -- Healthy Heart Hello Perhaps create differents services in parameters. + Pat B a �crit : > We have several locations using CRM and would like to be able to isolate the > service calender views to the specific locations. Is there any way to do > that? -- Clark Blog � propos de MSCRM3.0 sur SBS 2003 : http://mscrm3.blogspot.com ...

Outlook 2003 Filtering email after SP1
I have both server based and PC based SPAM filters which flag spam with [SPAM] in the subject line. Before SP1 to Outlook 2003, my filters to delete these messages worked. Now messages that are marked as junk by outlook are not effected by my filters, they go to Junk, despite my filters. If I turn outlook Junk filtering Off, my filters work, but I was wondering if there is a way to restore the pre-SP1 behaviour. ...

Folder list, inbox and calender
Hi All I have seen this before but I don't know how it was done. Can anyone tell me how I can view my Folder list, inbox mail and Calendar at the same time all in the same window thanks wayne You can't unless you design a custom Outlook today page. --� Milly Staples [MVP - Outlook] Post all replies to the group to keep the discussion intact. After searching google.groups.com and finding no answer wayne <wmb37@zoom.co.uk> asked: | Hi All | | I have seen this before but I don't know how it was done. | | Can anyone tell me how I can view my Folder list, inbox | mail a...

"Remote" filtering
Warning: I am not an excel expert and don't know much of the technical lingo that I have read on the "threads" in the pursuit of an answer to my question...so here goes. I have a spreadsheet with about 10,000 rows and 100 cols of info. I run analyses on the data in this sheet by employing filters and subtotals based on the concept being run. I would like to do 2 things...1. have a few cells near A1 where I could type in a word and remotely filter a column (for example I would type "Joe" into a cell and it would know to filter for "Joe" in column G, and woul...

recalculating advanced filter?
When I use an Advanced Filter in Excel, is there any way to set it up so that, once the filter is defined, the filtered list changes as soon as I change the criteria? I want to automate the production of multiple lists depending on the user's input, with transfers between multiple worksheets etc, and I cannot ask the user to go through various worksheets and click through Data--Filter--Advanced Filter--OK everywhere. I could ask the user to click once somewhere. I suppose I have to write a macro that will go through all the worksheets and execute Data--Filter--Advanced Filet--OK e...

Mysterious Filling of Disk Space
I am experiencing a new problem with Outlook 2007. I can think of no change that has been made to cause this problem. My PC has limited space free as it uses a Solid State Disk. In reality there is usually around 1.5Gb free. When I start Outlook the free disk space will be rapidly consumed such that it is all gone within about 15 minutes and applications start o fail. This is annoying with Outlook because it corrupts the setup and requires me to reset the navpane. If I shutdown Outlook the disk space stops being consumed but is not released. When I reboot, the disk sp...

Loads of Mystery appointments (mysteriously deleted)?
Here's a wierd one... there are hundreds of deleted appointments in my deleted items folder they are all scheduled for 'Tue 01/01/1980' and in every other respect resemble an appointment that I was invited to about a year ago. The appointment is titled 'Michelle at Pearsons', and each one in deleted items, has a partner called 'Updated: 'Michelle at Pearsons'. But I haven't done anything with this appointment at all - for about a year - I only discovered them recently when Google sync alerted me to the fact that I'd deleted 12 appointments today....

can I delete tmp files in \Exchsrvr\Mailbox\vsi1\filter
We use Veritas to backup the exchange, it reported some tmp files in the folder \Exchsrvr\Mailbox\vsi1\filter are corrupted. I found the size of it more than 1G, and some files are several years ago. Is there any tools to delete those files? or I can delete them manually? hi, i think u r refering folder \Exchsrvr\mailroot\vsi1 ? this folder contains the mails that r in the transmiting stage, in-out-bad, if u r sure that u dont need those pending mails u can manualy delete them,, shudown exchange services befor deleteing them, DONT DELETE THE FOLDER STRUCTRE regards "Ivan"...

sharing calender in crm ?
hi all would like to find out that the calender inside crm is individual calender only or it is possible to share it out to other users or a team ? thank you ...

Data changes in advanced filter
I have just done an advanced filter and copied the results to another sheet, the data has been copied over with just values, is there any way of copying the data as is, ie with all the underlying formulae? Thanks in advance Try: Paste Special...>Formulas Regards, Fred "David Sher" <DavidSher@discussions.microsoft.com> wrote in message news:457F364B-EA58-47AF-8E2E-0914BD0E1296@microsoft.com... >I have just done an advanced filter and copied the results to another >sheet, > the data has been copied over with just values, is there any way of >...

Access to Calender
I need to grant the CEO's secretary access to his outlook calender. How can I do this. On Fri, 21 Oct 2005 08:27:18 -0700, "George Schneider" <georgedschneider@news.postalias> wrote: >I need to grant the CEO's secretary access to his outlook calender. How can >I do this. Easiest is to show the boss as you do it on his PC. You can get 3rd party utils to get you that level of perm setting, but it's a waste for one user. Is there a way to add an icon in outlok for the secetary? The only way I've been able to do it file __> open --> other user...

Junk email filtering
When using Exc 2003 and Outlook 2003 junk mail filtering works when deliver new email is set to mailbox - however, when it is set to personal folders it no longer works? Is this because when you use mailbox the message stays on the exc server and when you use personal folders it removes it from the exc server? Is there anyway to apply the filer to personal folders? Thanks -Ian ...

Calculation mystery
I have problem with calculations in a program produced using VC++ and MFC. The calculation is using double floats. It loops until the result is reduced to a target value. In debug mode the calculation needs 178 loops. In release mode the calculation is not consistent and sometimes needs over 38000 loops. I think this must be something to do with double floats in debug mode. I can't fathom out what could cause the loops to vary in release mode. It shouldn't change from run to run and it doesn't change in debug mode. Any ideas? Steve -- EasyNN-plus. Build Neural Networks. ht...

Test Application for Direct Show Filter
Dear Team, I builded simple direct show source filter, MySource.dll as a subproject and included in the OS image. My registry settings are as follows: [HKEY_CLASSES_ROOT\Filter\{CDD3577F-7141-4F5B-818C-EC82509E0776}] @="Custom Audio Filter" [HKEY_CLASSES_ROOT\CLSID\{CDD3577F-7141-4F5B-818C-EC82509E0776}] @="Custom Audio Filter" "Merit"=dword:00600000 [HKEY_CLASSES_ROOT\CLSID\{CDD3577F-7141-4F5B-818C- EC82509E0776}\InprocServer32] @="MySource.DLL" "ThreadingModel"="Both" I can see the setting using remote regis...

Filter Query
Is there a way to filter for records that have one of two values. I have two Yes/No fields, and they can't both be True. I want the records that have one or the other. The way I have it now, the records that have one or the other are grouped on top, but after those records, the records that have neither appear in the form. Given Field1 and Field2, both yes/no, I'd put "<>Field1" under Field2 or visa versa. This will return only records where the two fields are unequal. Todd On Aug 2, 1:26 pm, DandimLee <Dandim...@discussions.microsoft.com> wrote: > Is...

How do I default the Outlook 2007 Calender View to two or three we
I can change the Month Calendar View to two or three weeks by dragging the cursor over the dates in the navigation pane. But as soon as I leave the calendar view (to email for example) and come back to the calendar it has changed back to the month view. There is not enough space on my laptop to see more than one or two items per day in the month view (without using the drop down), with the two or three week view I can see five or six items. Any solutions or work-arounds, or even any program add ons that might work? Thanks Noel I'm not aware of any addins that will make it p...

Mysteriously Deleted Files
Hello, this is my first attempt at a newsgroup and I'm hoping that someone might know what's happening to this system I'm working on. The computer I'm dealing with has Office XP pro installed on it, and recently the shortcut links on the left side of excell relayed an error message concerning the files being missing. I used the search function to locate all of my .xls and .doc files and only the hidden and system files returned as matches. I then looked the nortan protected recycle bin to see if any files had been deleted and possibly be restored, and a few excell f...

Filter formula 05-19-10
HI I have a database with repeated informations as listed below and is increasing daily Nat Firm Name SPAIN VIAJES EL CORTE INGLES SPAIN VIAJES EL CORTE INGLES SPAIN VIAJES EL CORTE INGLES GREECE AMEX INTERNATIONAL- HOLLAND GERMANY AIRTOURS INTERNATIONAL-GERMAN ITALY DERTOUR GMBH & CO. KG UNITED KINGDOM INTERNATIONAL TRAVEL CONNE BELGIUM RAINBOW TRAVEL LTD I would like to have a formula which will list the firm name once when choosing the country. I don't want to perform it through a pivot table as I am using the sumproduct to add the qty and amount to have a com...

HTTP Filter Driver?
I want to write a filter driver that sits above the Http driver. I'm calling IoGetDeviceObjectPointer() with the name "\\Device\\Http\\AppPool" in a UNICODE_STRING which is one of the HTTP devices (as shown by WinObj). For the access mask I'm passing FILE_READ_DATA. I'm getting back STATUS_INVALID_PARAMETER. What am I doing wrong? Better question is: "What are you doing?" Do you have any documentation about the device you are fooling with? I know I don't. Look at the "Windows Filtering Platform" (WFP) documentation for some id...