View User account which is submitting mails to IMS in 5.5
Few users connect to the mail server from internet
using the IP address and send/receive mails.To stop
relaying in my mail server, i selected only one option
of " Users who authenticate succesfully can send mail ".
With this setting it was working fine till Mydoom Virus
came out.Now because of the virus, there are lot of
unwanted mails in the IMS Queue.I Could check the IMC out
folder and found that these mails are coming from users
from Internet who are on dialup.
Since only authenticated users can send mails,i feel
few PC's connecting from internet are...CRM 4.0 E-mail router cannot send external e-mails.
I have CRM 4.0.I can send e-mails from web client to all internal users.This
is working great.But I cannot send e-mails to external domains.
I am using exchange server 2003 and Exchange server is different server from
CRM 4.0 .
I'm testing e-mail router interface,Test results are success.
I am checking exchange server virtual server settings for relay,Relay setup
is okey for send to outside of this exchange organization.Granted access
working for my crm server ip.
I cannot find any resource for this issue.
Q1.Can I monitor CRM E-mail router traffics?
Q2.CRM E-mail Router h...Junk Mail Filter
I have the junk mail filtering turned off but my Junk Mail folder keeps
A few of the messages in the folder are from the blocked senders list but
most are from the safe senders list and are also in my contacts list.
I stll receive other, not filtered mail in my inbox.
Any ideas why my contacts and other messages, not on the blocked senders
list, are filtered when the junk mail filter is set to off?
Have you checked for filtering at the email's web service? Also, what about
in your anti-virus program?
"Ohio Ron" <Ohio Ron@discussions.microsoft.co...error in script from internet explorer
when i use online help i cannot click a link without getting an error from
I.E. concerning the script
...Money 2004 internet update
My 2004 is not updating properly, infact not at all. When
I press update now it will crash the program. My internet
settings and bank setting are correct. This problem is
only happening on my Dell computer running windows 2000.
Ijust installed a new graphix card and I am running a
dual monitor setup. It updated once after I installed the
card then not again after that. I loaded the program on
my laptop to test it and all features work fine. Are
there any known issues in regards to graphix cards ore
running in a dual monitor set up?
Well... It is definatly the video card. I disabled ...Mail forwarding problems to external recipients
I am new to this newsgoup so I hope you can all bear with me.
I've just started at a new company and I'm trying to make head and tail of
everything, and I've come across a problem.
We have 1x Exchange 2003 Server and clients are using Outlook 2000. When I
set up a Rule in the Rules Wizard to forward emails and run the rule my
external mail address receives nothing.
However, if I set the rule up to forward to my internal exchange mailbox
then I get the emails without a problem. I do not know if this is a policy
issue (although I am inclined to doubt it as my OU has a defa...Unable to Open Your Default e-mail folders #2
Trying to start Outlook 2002 up and keep getting the following error
Unable to Open Your Default e-mail folders
Any tips to resolve this problem please
Did this work before and just suddenly stop? Have you verified your profile
is set up correctly?
Outlook Tips: http://www.outlook-tips.net/
> Hi Guys,
> Trying to start Outlook 2002 up and keep getting the following error
> message: -
> Unable to Open Your Default e-mail folders
> Any tips to resol...Install the internet pack for Internet Explorer
Content-Type: multipart/related; boundary="dyatvmthbtnsg";
Content-Type: multipart/alternative; boundary="fbkzxamyh"
this is the latest version of security update, the
"October 2003, Cumulative Patch" update which resolves
all known security vulnerabilities affecting
MS Internet Explorer, MS Outlook and MS Outlook Express
as well as three new vulnerabilities.
Install now to help maintain ...Internet Explorer
I am running Win XP 2 and have automatic upgrades ticked. IE upgraded to
8, then problems. I cannot open a MS window, try's to open but closes
half why through. Same when I try to open Win Media Player, opens but
when I click to play window closes.
Reverted back to IE 7 but problem remains.
Can open MS windows using Firefox but not media player.
Tried running IE diagnostics but problem remains.
Any-one any idea's? Its driving me crazy.
clanbull's Profile: http://forums.techarena.i...Mailing List for Exchange
Wanted to know if anyone knew of any Mailing List software which works with
Exchange / AD.
The users should be able to manage their own Mailist list via email
There's free stuff like the free edition of listserv -
http://www.lsoft.com/download/listservfree.asp - you don't need to install
it on an Exchange server.
GFI Mail Essentials also has a list server, can install it on Windows SMTP
server (Exchange doesn't need to be installed).
Ikakura is another:
MVP - Excha...Internet Explorer Problem
I have a weird one that I haven't been able to solve and need some
help. My Internet Explorer browser on my XP machine will not run in
'Admin' mode but runs fine in any of the user modes on the machine.
I've done what I can to reset IE to original settings and no luck
which leads to to believe that the program, in of itself, is okay but
there's apparently some registry key I need to tweak to get it running
again in Admin mode. If I boot up into a general user mode OR 'switch
user', it's fine.
So I'm hopeful that a MS engineer might see this and b...Can 4-up, mail merged postcards each have a diff address?
I'm trying to do a mail merge, and when I print the 4-up cards, each sheet
repeats an address 4 times instead of 4 diff addresses!
If you are looking at print preview this is a bug, if the merge is setup correctly it
will print correctly. Do a test on plain stock. There is a test option on the print
Mary Sauer MSFT MVP
"losabia" <firstname.lastname@example.org> wrote in message
> I'm trying to do a mail mer...Play sound
I have an office 2003 workstation - sound in general works on this system.
However I have Outlook set to play a sound under options advanced e-mail
options. However a popup comes up but no sound. What is the file it should
Strangely it does play occasionally - although not always - it sometimes
occurs for exchange and sometimes for Internet - it is set for REALLY loud
so it isn't a matter of me not noticing the sound.
"ayz" <email@example.com> wrote in message
> I have an office 2003 workstation - sound in g...Rmsnet and Internet order
It seems that information on this subject is hard to come by so I am hoping
someone here has a little insight.
Way back when, we used to use Quicksell 2000 for our brick and mortar POS.
We also use Storefront V5 for our web store. SMSPOS used to host a server
where we could export our Storefront orders in Yahoo XML format to a
specific directory. This was done from within the Storefront software using
the HTTP POST method. The XML was posted to an asp script which I suppose
parsed the XML and created a file suitable for import into Quicksell. We
would then connect to that server via a keystro...Mail filtering bottlenecks
WE have a dmz mail filtering server, and are using exch 5.5 as our mail
Recently it has taken up to 10 mins for an internal e mail to reach it's
What if, the dmz was processing messages slower than 5.5 was sending them,
is it possible that a queue is forming somewhere on the 5.5 box, and
internal messages are being trapped in it, while the dmz server catches up?
Thus delaying the sending / recieving of internal messages.
If not this reason, are there any other issues which may cause delay?
Internal mail should not go to DMZ (unless you have some weird setu...Internet Facing Deployment (IFD) not facing the internet
I have microsoft sharepoint running with small business server 2007 on
an application server.
I'm trying to host Microsoft Dynamics CRM 4.0 Internet Facing
I've set up the DNS to point to the server where CRM is running on IIS
I've opened up permissions for it in IIS
The Firewall is as open as I can figure out to get it.
Port forwarded and translated in the NAT policies
I even set up a sub-domain on my domain provider to point to the the
And that static IP points to our private IP in the DNS(as stated
I ran the IFD tool, I believe correctly, beca...'Save As' hangs Excel XP 2002 SP3
I have a problem in our office. For the most part Excel works fine. We can
open files and save them as long as we dont use the 'Save As' feature and try
to save it to a Network Drive. Files can be saved locally then have to be
copied to the Network Share.
Of course my first reaction was 'Permissions Issue'. BUt each user has full
access to the folder. They can right click and create a new Excel file and
rename it. BUt if they open that same file then try to 'Save As' back to the
same folder Excel hangs. Using the 'Save' feature works just fine.
What can i remove entries in auto-detect recipient with
Remove individual addresses from the autocompletion cache by highlighting
the entry when presented in the suggested names list (use your arrow key to
migrate to the entry) and then hitting your Delete key before you tab out of
the field. To clear the entire cache, follow the instructions here:
"firstname.lastname@example.org" <email@example.com> wrote in message
news:20f5801c45aa0$f73bb8d0$a601280...cannot get mail
all of a sudden i can't get mail, 6 days now. i have read questions and
answers. please help
Account: 'mail', Server: 'pop.att.yahoo.com', Protocol: POP3, Server
Response: '-ERR [AUTH] invalid user/password', Port: 995, Secure(SSL): Yes,
Server Error: 0x800CCC90, Error Number: 0x800CCC92
First, test your password by logging in to your provider's webmail:
If that works, it proves you have the correct username and password.
A likely reason for the username/password failing in Windows Mail is
account corruption. One thing you...Mail Merge #16
While doing mail merge with Publisher document, using wizard, when I selected
folder to get addresses in one of the contact folder, I got an error, 'dialog
or database engine failure'.
Ed looks left. Ed looks right. No-one is there. Furtively, Ed picks up
a note from GC Publisher <GC Publisher@discussions.microsoft.com>. On
it is written:
> While doing mail merge with Publisher document, using wizard, when I
> selected folder to get addresses in one of the contact folder, I got
> an error, 'dialog or database engine failure'.
a) Try updating your MDAC...Millionaire at 31...on the internet #7
Do you want a great backend product that is selling like crazy this week?
My readers are running to get this NEW CONCEPT!
I�m selling more this week than I ever did in the past months with any other program.
My commissions are climbing very fast. I�m really excited!
This is the best ad copy I�ve read in months! It sells.
If you haven't felt the shockwave yet, stop everything you are doing and read this to be one of the first promoters.
The inner circles of the shockwave are raking in the profits like fury.
This will pay us for years to come as it is the first �Wave� of the NEW I...new excel files not saving across wireless network
In the past I have been able to save a new excel file back to the desktop
server. Now when I try it indicates that the save location is not available.
But if I save the file locally first and then back to the desktop server it
saves ok. Is this an excel setting or some network condition preventing save
of new excel file? Thanks.
The information in the following MSKB article may help you:
You cannot save a file from your Windows XP-based or Windows 2000-based
computer to a shared folder on a file server
> In the past I ha...Excel XP saving to Excel 2K format.
I am trying to save a modified excel sheet as a Office 2K version (that is
what the client is using) but I get a "Document Not Saved" error with no
Does anyone have a clue as to how to save it as an older version?
";-\)" <firstname.lastname@example.org> wrote:
>I am trying to save a modified excel sheet as a Office 2K version (that is
>what the client is using) but I get a "Document Not Saved" error with no
>Does anyone have a clue as to how to save it as an older version?
Excel XP and 2000, as well as ...How can I have attachments opened when I open the mail?
Someone posted to change the default--How is this done? I am a beginner and
on the winter side of life. Many Thanks!
This is not possible and not desirable. For security reasons, you should
only open attachments that you are expecting from people you know.
Sue Mosher, Outlook MVP
Microsoft Outlook Programming - Jumpstart for
Administrators, Power Users, and Developers
"rebojo" <email@example.com> wrote in message
> Someone po...Internet 7 to Internet 8
I am trying to convert Intert 7 to Internet 8 through Compatibility but I
can't manage to make it work.
If you have Internet Explorer 7 then you can not "convert" it to To Internet
Explorer 8. IE7 doesn't have any way to become something that wasn't invented
when it was made. If you have Internet Explorer 8 you can use compatibility
mode to display pages that worked with IE7 but won't in IE8. One caveat: If the
page depends upon some feature of IE7 that was changed as a security
vulnerability, compatibility mode will not re-enable the vul...