Additional email account
If I add an additional email account to my current profile (POP server), how
do I access it? I do not understand how to switch back and forth between
email accounts in the same profile. Do I have to change the default email
account everytime I want to access the other account?
I understand that I can set up another profile, which is what I do. But why
would anyone set up multiple accounts with the same profile if it is
necessary to change the email account to default, close and reopen Outlook.
Or is there a better way?
It's not clear what you mean by "access" or even w...Dual Displays
I want to connect my Sharp Aquos flat screen TV to my computer, and see my desktop on both the TV and computer monitor.
Windows Vista Home Premium.
HP Pavilion a1610n computer.
Galaxy GeForce 8400 GS graphics card, outputs: 1-VGA, 1-DVI, and 1-SVGA. There is no HDMI port on the card.
I connected a VGA cable between the motherboard "on-board" VGA port and the TV, figuring that I could use that output to work with the TV. The computer monitor is plugged into the GeForce graphics card.
Tried the Desktop "Display Setting". It says, the number 2 monitor is "N...Email attachments #16
I am currently experiencing an Outlook problem where any
email attachment I add is automatically compressed into a
zip file. I attach WORD documents or PDF files and the
recipients receive these files as a .zip file. It has to
be a preference problem, but I can't find a way to stop
this automatic zipping of files. These same documents
can be sent by others using Outlook 2000 without a problem.
Has anyone encountered this problem before.
You have an add-in installed that does this like attachment compressor as
this is not a native function of Outlook.
Robert Sparnaa...Folder could not be displayed
I am running Windows XP and Outlook Express 6 just fine
then one day my husband does something to my computer and
his email account won't work. My email is working just
fine but in his he cannot open his inbox. It says folder
could not be displayed, and when you send and receive it
gives you this error message:
"An unknown error has occured.
Server:'incoming.verizon.net'.Protocol:POP3, port: 110,
Secure(SSL): No, error number: 0x800C013B"
If anyone could help me with this I would greatly
T...Display a message box "this entry is a duplicate"
How can I display a message box on a form if the shipment number is a
duplicate? I need a message box to pop up when user attempts to tab out of
Private Sub txtShipNum_BeforeUpdate(Cancel As Integer)
If DCount("*", "MyTable", "ShipNum = '" & Me.txtShipNum & "'") > 0 Then
Msgbox Me.txtShipNum & " already exists."
Cancel = True
This assumes that your text box is named txtShipNum, that the name of the
field in table MyTable is ShipNum...Non-Delivery Reports for External email senders
My Exchange 2003 Server only sends NDRs to internal email senders. External
email senders who mis-type email addresses get nothing delivered back. My Bad
mail folder is empty but the mail queue is full with stuff trying to leave
the server. How can I make the external mail servers get their
non-deliverable reports. I have Recipient policy set to check users in active
directory and enabled in the SMTP virtual server.
Make sure everything is enabled, use this article as a reference.
"David A" <DavidA@discussions.microsoft.com>...Access Email
Is there a way to get around the security popup messages that Outlook comes
up with when access send a email, have looked around and can only find
addins the i want to try and stay away from to make it a simplier process.
Been looking at various sites and this keeps coming up 'Object model guard'.
Would like to have access take care of the email and outlook problems.
The reason why i want to use outlook is that i have records stored in
outlook that a email has been sent.
Take a look at http://www.outlookcode.com/article.aspx?ID=52
An add-in such as Outlook ...how to display values in 3 cells into one cell
Anyone can help me how do I display the 3 separate different values in 3
cells into just one single cell ?
thanks so much in advance.
Either there was a typo or there's an echo in here.
That line should have been:
= A1 & " " & B1 & " " & C1
"Bradley Dawson" <firstname.lastname@example.org> wrote in message
> In the target cell, type:
> = A1 & B1 & C1
> where A1, B1, C1 are the cell addresses that you want to concatenate.
> If these have number...How to select & display distinct values
I need help with a form please.
My form has two controls, the first being a combo box. This box should
select the company name from a lookup table. The lookup table has only two
companies in it, however, they each are repeated several time. Company 1 has
about 10 rows, company 2 has 3 rows. I used the query builder and came up
with the statement:
"SELECT DISTINCT Lktbl_Role_Master.CompanyName
When I run the statement directly from query view, it executes perfectly and
returns exactly two rows (one for each company, in a datasheet view) ho...Display Time in Outlook
The time setting in my Outlook is one hour behind my
actual time. I cannot determine how to change the time.
Outlook is the only item that is incorrect. Other display
times in operating system are correct. Thanks, Jodi
...PK and FK Displayed
I am a complete Visio newbie, and cannot find the answer I need in books or
I am trying to create ER diagrams from scratch, and not connected to real
tables, using VEA. I have added tables ('Entities') to the form, connected
them with a Relationship connector, and, in the Database Properties window
I've assigned the end points to a Primary Key on the left and a Foreign Key
on the right. But the model shows the connector as running between the top
colums on both sides, whereas I want the keys to be in that upper box and
provide the connector's end points. Wh...Formulas are displayed, results are not
Hello, For some reason, when I enter a formula into a cell and press
enter, the formula just stays there. Anyone know what I can do to show
I tried pressing Cntrl + `, but that didn't work.
FYI, when I cut and paste a column from a separate workbook, that
column works like normal (i.e., the formulas produce results).
Thanks for any suggestions!
Maybe your cell is preformatted as Text.
Try formatting to general then erase your =
and type it in again.
"Mike C" <email@example.com> wrote in message
news:f699bcd4-ad82-4a88-9759-5638c147b...calendar sometimes opens in month view
every once in a while (sorry that i can't be more precise), i find that
clicking on calendar, under 'all folders' , causes it to open in month
view. i can go back to inbox, and again click on calendar and get month view
again. for most of a day. then it goes back to opening on current day.
which it does most of the time. i don't remember if this happens after a
reboot, standby, or just for no apparent reason.
actually i prefer month view and wish i could make it open this way all the
any ideas about what it happening here?
...Multiple email addresses #4
I recently went from Outlook Express to Outlook, importing
my Address Book as I went. However, when I am in Outlook,
I can only see one email address per contact. That is, if
I have two email address for one contact, I can only see
the primary one in Outlook. How do I correct?
Do you have separate contact items for the several addresses or what?
Milly Staples [MVP - Outlook]
Post all replies to the group to keep the discussion intact. Due to
the (insert latest virus name here) virus, all mail sent to my personal
account will be deleted without reading.
After searching google.gr...Stop displaying a line
I have a line graph/chart and it gets its values using a formula and the values of another column. However this poses a problem because if there is nothing in the targetted column the formula returns 0 cause the line to drop to the bottom, instead of casuing the line to just end until a value is added to the target column. How can I do this?
Change your formula to use NA() if the cell is empty. For example:
To hide the resulting #N/A errors on the worksheet, you can use
conditional formatting. There are instructions here:
http://www.contextures.com/xlC...A question about Console window(display or not display)
I've redirected the (stdin stdout stderr) of a console window process
I spawned to a pipe.
And I want to display the redirected console window, the question is:
If I display it(set Create_new_CONSOLE in createprocess and some flags
in startupinfo), I cannot use the redirected way of pipe, which means
if i do not display, i can use the pipe communicating with the child
Does it mean that as long as I disply the console window, windows will
change stdin stdout to "screen&keyboard" instead of my pipe?
That's right. If you redirect stdin or stdout then you preemp...unattached textboxes disappear when a msgbox is displayed on a tab control
I'm using Access 2003.
I have a form with a tab control on it. I was having problems with labels
flashing and I followed the suggesting from Allen Browne -
The flashing went away but now when a msgbox is displayed the unattached
textboxes that I'm using as labels disappear. They come back as soon as the
msgbox is removed from the screen.
I've searched google looking for an answer but have come up short.
Does anyone know why I'm experiencing this behavior and how to make it go
That *is* strange. Have you tr...does Excel support multiple display monitors?
Hello All Excel Experts
How do I move chart windows to multiple display montors?? (one
computer runnng three monitors... Excel Charts will not
move off the primary monitor.
Your advice is EXTREMELY appreciated
...Calendar not printing all appointments
When I print a monthly calendar only 3 appointments per day will show. Some
days I have 4 appointments. This only seems to happen with my laptop.
...calendar time scale
Using Exchange 2003, all clients Outlook 2002. Is there any way to set up a
calendar in a public folder to have the same time-scale view of 15 minute
increments for all users?
...Display or not display series
I have a graph with four series but some of the series may
be blank, i.e. the series name is <blank series>. Is
there a way to not display these series on the graph
and/or legend if they are blank, and display them if they
are without deleting the series?
Create a chart from all the data
Select the data on which the chart is based.
In the heading cell for the series name column, select (NonBlanks)
from the dropdown list
The series with blank name cells will be hidden in the chart.
> I have a graph with four serie...Bouncing Emails #2
I have a user who complains that his emails are bouncing. I have requested
the user to ask the people who are emailing him to send me the bounced
message (either to my official email or hotmail address) so that I can check
where the problem could be.
My user complains that his contacts are busy and they are unable to do that?
How do i go about resolving this issue?
My exchange configuration is standard exchange 2003 with IMF implemented. I
have disabled all the spamming features of SMSE.
Did i miss anything out?
can you get onto a gmail or yahoo account and send him an e...Displaying an equation
I have an equation setup that is referencing a few other cells that have
equations in them. I want to have a cell that displays this equation with the
answers that are calculated from these other cells displayed as values in the
new equation. Any help would be greatly appreciated. Thanks
In article <E4143E2B-360A-4B43-955F-73BF8EC60694@microsoft.com>,
"hoising8" <firstname.lastname@example.org> wrote:
> I have an equation setup that is referencing a few other cells that have
A general query
Im serialising a person object with the following member variables
Private _forenames As String
Private _surname As String
Private _dob As Date
Private _marital_status As MaritalStatus
'Public Get and Set Properties here for each of the above
' I'll not detail them all to save space but Ill show attributes
<XmlElementAttribute(Elementname:="dob"...Email Templates with Attachments
It would be really good if Microsoft considered adding file attachments for
templates. It will then allow for bulk emailing using templates with files
attached to it as well. It is simply not possible at the moment and is
causing great pain for our clients.
This post is a suggestion for Microsoft, and Microsoft responds to the
suggestions with the most votes. To vote for this suggestion, click the "I
Agree" button in the message pane. If you do not see the button, follow this
link to open the suggestion in the Microsoft Web-based Newsreader and then ...