Exchang 5.5 Question
I'm currently runnning Enterprise, if I can trim and compact our database to
go down below 16GB, can I restore the database to an Exchange Standard
hmmm...that's a good question. I have never heard of anyone wanting to do
that, or trying it. I can't find anything on it...my first instinct would
be to say no, but I am not 100% certain. are you going to do this in
production? you might want to test it on a recovery server, first, to see
what your results would be...
"TagaR" <TagaR@discussions.microsoft.com> wrote in mes...REF error message when inserting new rows
A formula that is referencing the cell above returns a REF error message if a new row is inserted between the two. Is there a way to eliminate this problem without having to re-autofill?
I've tested this in both 2000 and also 2002
see David's answer to your other post
Ellen Dan wrote:
> A formula that is referencing the cell above returns a REF error
> message if a new row is inserted between the two. Is there a way to
> eliminate this problem without having to re-autofill?
> I've tested this in both 2000 and al...VB question
I would like some advice please. I am trying to learn VB6. I was
recommended a very expensive book, Programming in Visual Basic 6.0. Before I
decide to keep this book. I would like to know if the practice/examples in
this VB book can be used in Microsoft Visual Basic Access 2003? Thank you
for any advice.
Sorry, I don't have a copy of the book, so I can't give a definitive answer.
However, the language components of VB and VBA are very similar. The major
problem you may run into is the fact that the controls available for forms
in VB are quite different that for forms in Ac...Newby CRM question
How do you create the 3 CRM databases if you are using a
full recovery backup plan? I cant find an example & I
want to make sure there isn't anything beyond
the "obvious". I know very little about SQL Server.
The CRM installation will automatically create the databases for you. The
recovery plan shouldnt have anything to do with this. Once their created, you
can verify the DB settings to make sure the recovery mode is set to Full, but
that should be all you need.
Was there something more you were looking for?
MVP - Microsoft CRM
I just received a new replacement computer with microsoft
office 2003. I have successfully set up my new outlook
but I cannot figure out how to transfer my old outlook
folders, date and emails over to my new computer and
>I just received a new replacement computer with microsoft
>office 2003. I have successfully set up my new outlook
>but I cannot figure out how to transfer my old outlook
>folders, date and emails over to my new computer and
>Start, Search, All Files and Folders.
I just started using Money 2004 deluxe and to be honest this is the first
time I use it so I have some basic questions that I tried to find answer
1- I included a CC account, this is an old credit card and I don't know the
starting balance of it, I just know the current balance. I downloaded the
transactions from the bank and now I'm trying to balance it. What is the
best way of doing it? I was trying to look for an option that let me
especify the current balance and the software be capable of calculate the
2- Last friday I downloaded a...COM question
I'm new to COM. My question is with a specific goal, but i guess this a
general COM issue, so I hope some COM expert could help me.
I developed a webbrowser based on the webbrowser activeX control. When
I noticed that it doesn't respond to keys like tab,delete and others, i
googled a bit and found that when adding the code below to the WinMain
message handle loop it works.
The important class is named BrowserWindow and it holds pointers to
IWebBrowser2 interface and a CAxWindow object.
is it necessary to do in every round of the loop the queryInterface(),
release(...Bulk Import Question
I'm trying to import Leads with Bulk Import Wizard. Everything seems
fine except that I can't pick the Target Field, it's greyed out. Is
this because the header record contains exact field names? It looks
like it is going to map to the wrong fields.
The options that are grayed out are required fields set within your form.
Are they on theleft hand column at the top of the list?
Microsoft Small Business Specialist
> I'm trying to import Leads with Bulk Import Wizard. Everything seems
> fine except that I can't pick t...Keep CString from new()
I've read some papers from vcdj and msj that conclude CString is a wrapper
class of string and acts like value type.
But some dev resources such as codeproject and this groups contain some
samples show "new CString(...)", especially when postmessage function
involved. That's misleading.
So is below code solid?
UINT ThreadRun(LPVOID pParam)
for(POSITION pos = LineList.GetHeadPosition(); pos != NULL;
::PostMessage(hWnd, WM_USER_FILECOMPLETE, 0,
void CPageRun::OnFi...new configuration
ok..I am soo frustrated with this..I have been sent out to do this with no
training...I have installed RMS on 2 machines..right now I just have the one
up and running but when I am trying to configure the register I am lost..I
have it as register one but this is also the machine that has the SQL
database on it too. I have an epson tm-t88IV printer. a pole display. and a
scanner. I cant find the drivers for these things. but mostly I cant
configure them I thought I did but I keep getting a dialog box that says
something about receipt format in journal???
also I am going ...Outlook 2003
Hope someone can help with his. My father has Outlook 2003, and today
he has found that emais are registering as being sent via "Send/Receive"
but they are not appearing in his Inbox, or Junk mail. They have
disappeared. I have now sent him 3 emails, he sees them arrive but then
they are nowhere to be seen.
So far I have talked through the fixes on
http://support.microsoft.com/kb/253504/ - ie check for filters (there
are none) and email accounts (set up correctly - we did a test message
and it arrived in his email inbox no problem).
He hasn't set up any rules, so wh...migration question #13
hello and happy new year
i am trying to migrate from exchange 5.5 to exchange 2003. Since we never
used public folders in exchange 5.5, do I need to migrate public folders
using pfmigrate? or can i just setup replication for schedule and free busy
and offline address books and once in sync, i can remove the old exchange
No need to migrate PFs if you have none.
John Oliver, Jr
MCSE, MCT, CCNA
Exchange MVP 2007
Microsoft Certified Partner
"xiyan" <firstname.lastname@example.org> wrote in message
> hello and happy new ...If/And/Vlookup question
I have a spreadsheet set up as follows:
Column A = dates in month/day/year format
Column E = number of hours
Column F = $ rate associated with the hours in Column E
Column I = Total of Column E X Column F
In Column J I would like to do the following, but I'm not sure what'
the most efficient way of doing it. I would like to summarize th
Total amount in Column I for each month and year. For example, I woul
like to add the totals from Column I for all the data for the month o
May, 2004 (dates in Column A). I understand I can add a row unde
each each month and subtotal the ...Interesting observation: new SQL time machine! :)
This is a multi-part message in MIME format.
Interesting observation: new SQL time machine! :)
Run this several times and note that sometimes the first value is =
greater than the second!
I thought that these should be the same.
I understand that it's due to the way datetime rounds to 3, 7 or 0.
It is just interesting to note!
DECLARE @v datetime =3D SYSDATETIME()
One of the features i like from Open Office, is the auto-suggest /
auto-complete word as you type. Say for example i type accommo the program
will show accommodation as an option and i just hit enter to make the choice
Can Word do this too?
It could through Word2003, and it's been reported that the feature was
restored in Word2010.
Although if you've already gotten as far as "accommo," that particular
AutoCorrect doesn't do you much good, since in that word it's the
number of c's and m's that's tricky, and how would it know wheth...Crossing to New Year in Source Data
I have a chart based on attendance for the school year. It goes from 9/09 to
6/10. I have my data source chosen for the entire time frame, but the chart
is only showing information until the end of 09 and won't continue into the
new year. I have date labels on the bottom of the chart. Any ideas?
I have just plotted the dates that you mention (in EXCEL 2007) along my
horizontal axis and am not seeing the problem that you are.
Maybe try taking out the Data Labels and see if that makes any difference?
Please hit Yes if my comments have helped.
I'm writing a small program on Win32 MFC where user can login to do
something. Now I would like to implement the automatic logout when the user
is logged in and there was no mouse nor keyboard activity for e.g. 10
seconds? Since there is a lot WM_x messages that mouse and keyboard produces
I could listen to it's to much work and probably not so elegant. Must I use
keyboard and mouse hook for this or you think there is a better solution?
How to know if my app was in idle time when it comes to user input? Thanks
"blue" <email@example.com> wrote in messa...archive pst question
If I list the archive folders in my folder list, does that negate the
improvements in speed that I get from archiving in the first place? I mean,
if outlook has to open those massive folders anyway, will that still slow it
down, or is it okay because my main pst file is being kept smaller?
Doesnt slow mine down, but then it might depend on size
"rij73" <firstname.lastname@example.org> wrote in message
> If I list the archive folders in my folder list, does that negate the
> improvements in speed that I get from archiving in...i am trying to set up a new mail ........
i am trying to set up a new e-mail address on windows mail aswell as import
my current live account to windows mail.
my servive provider is vodafone. kind regards jenny
Let us know how it goes.
"jenny lynn ince" <email@example.com> wrote in message
>i am trying to set up a new e-mail address on windows mail aswell as import
>my current live account to windows mail.
> my servive provider is vodafone. kind regards jenny
"jenny lynn ince" <firstname.lastname@example.org> ??????...open older msn files with new Money 2003
I just received my new computer with MS Money 2003
loaded. I've been using Money for Windows 95. When I
tried to open my files with the new version it got
corrupted after the conversion. AND it also corrupted the
original version! What to do? Is my past year's work
down the tubes???
H E L P
moneyless in Chicago!
What do you mean that it also corrupted the original version? You will not
be able to open the 'converted' file in the original version. But Money
always saves a copy of the file prior the conversion and changes the
extention to .mn* where '*' is the...New e-mail chime alert but without new mail
I just upgraded to Windows 7 from Vista. I was using Windows Mail and now
I'm using Windows Live Mail. I am sending and receiving e-mail just fine,
however, I am also getting "ghost chimes". Meaning I get the chime sound
that a new e-mail has arrived (exactly the same sound) only there's no new
mail in my Inbox. It's driving me a little nuts. It's not junk mail. There
doesn't seem to be any new mail at all arriving, just the chime sound
Thanks for any help or suggestions!
Are you sure there are no new messages? Check the setti...Synchronization Question
Can the following be done in Outlook and how do I do it?
User has workstation at office, HPIPAQ handheld, and laptop at home. I want
the user to be able to do the following.
1. sync IPAQ with Workstation
2. take IPAQ home and sync with laptop
3. when user connects via dial-up user sees contacts, calendar, inbox, and
so forth that is on exchange server
4. but when user is offline they should not see any email in inbox and
should beable to sync contacts, calendar, notes, and tasks
5. When user does a Send/Receive it should only send emails composed on
laptop and not receive them also does ...HowTo Automatically Have AutoArchive Turned On When Create a New Folder
I searched archives, but couldn't find any matches...
Outlook XP, comes with 6 folders with auto archiving already enabled.
My question, is how can I configure Outlook so that any new folders
created have AutoArchiving already enabled and set to use default
email@example.com (dvd9) wrote in message news:<firstname.lastname@example.org>...
> I searched archives, but couldn't find any matches...
> Outlook XP, comes with 6 folders with auto archiving already enabled.
> My question, is how can I configure Outlook so that any new fol...New cool software!
Check out this software I found on the net...
It's called ImageBatch and has a batch mode for converting, naming and
It's very cool!
...message " cannot save item " when trying to record new events
I get the message " cannot save item " displayed when trying to input new
events,meetings, etc into my Microsoft Office Outlook 2003 calander page.
Any help would be appreciate , I tried a few normal bypasses without success.
Try resetting the view on the folder.
Diane Poremsky [MVP - Outlook]
Outlook Tips: http://www.outlook-tips.net/
Outlook & Exchange Solutions Center: http://www.slipstick.com/
Outlook Tips by email:
EMO - a weekly newsletter about Outlook and Exchange: