Reply:

access 2007 run time
Does anyone knows when will be available. My app are in Acc 2002, and they don't work on Vista unless I convert them to 2007. Running Access 2007 in Runtime Mode: http://blogs.msdn.com/access/archive/2007/03/26/running-access-2007-in-runtime-mode.aspx HTH Vlado "Munteanu Gabriel" <softdata@softdata.ro> p�se v diskusn�m pr�spevku news:EB858512-90BA-4ED2-9E27-CC57FEEF6FA3@microsoft.com... > Does anyone knows when will be available. > My app are in Acc 2002, and they don't work on Vista unless I convert them > to 2007. "Munteanu Gabriel" <...

Referring to controls on a form from a subform
I'm trying to hide/show two labels on a popup form (frmPopup) based on how the form was called from a subform. The subform (fsubPeople) is in continuous view. It's a sub sub form (i.e., MainForm > SubForm1 > fsubPeople). There's a command button in the Detail section, and a command button in the Form Header. If the user clicks on the command button in the Detail section (which opens frmPopup filtered to a matching record), things work: I can set and hide the labels correctly. But if the user clicks on the command button in the Form Header (which opens frmPopup in acFormAdd...

SBS 2000 Exchange 100% CPU Issue
Hello, I have been sent 100's of malicious emails that have 1000+ recipients and this makes a process on my server (vmimb.exe) run at 100% CPU and the whole server grinds to a halt. I know this process is the MS POP3 connector and wandered how I might combat this problem, is their a POP3 connector which doesn't suffer this issue. Thanks. Merlin "Merlin" <imerlin@hotmail.com> wrote: >I have been sent 100's of malicious emails that have 1000+ recipients and >this makes a process on my server (vmimb.exe) run at 100% CPU and the whole >server grinds to a...

transfer license to new computer
Hello All. My POS computer is old therefore I am trying to upgrade my computer with new hardware. How can I deactivate my license from old computer and transfer into my new computer? I am using MS RMS 2.0 and Headquater Client 2.0. Please be advised. simply remove old computer setup new(make sure has compitable OS) install RMs and updates. Configure when you setup the key you will be required to call india and explain why you are moving your license. Tell them your replacing your hardware. Done. =================== "Alex" <blacksky80@gmail.com> wrote in message news:d265...

Time Format Calculations
Hi, I have a column in Excel which contains Time entries. Its using Custo format of "h:mm". The problem is that if I want to have sum of entries in this coulmn, am getting a bizare number? Is there any way to fix this issue? Thanks -- Message posted from http://www.ExcelForum.com Format the sum as [h]:mm -- HTH Bob Phillips ... looking out across Poole Harbour to the Purbecks (remove nothere from the email address if mailing direct) "dhaliwam" <dhaliwam.yajum@excelforum-nospam.com> wrote in message news:dhaliwam.yajum@excelforum-nospam.com... > H...

Category Groups
I can't find a way to make changes to the category GROUP. I want to delete the Household Expense Group and add a new group. Can someone help ? This is a common FAQ. You cannot add new category groups. http://umpmfaq.info/faqdb.php?q=20 -- Glyn Simpson, Microsoft MVP - Money Check http://support.microsoft.com/default.aspx?scid=fh;EN-GB;mny for UK tips and fixes for MS Money. To send Microsoft your wishes or suggestions, use http://register.microsoft.com/mswish/suggestion.asp or email mnyukwsh@microsoft.com especially if it's a UK specific wish. I do not respond to any unsolicite...

Moving to new machine.
I need move our Exchange 5.5 installation to a new machine. The existing machine is on its last leg and will fail soon so it's imperative I do this soon. Since I inherited the installation without documentation I'm in deep &^$&. Does anyone have a technical source or guide as to how to do this? Is this information available in the exchange documentation, if so what is the process called? I haven't been able to yet locate what I need. Any help will be appreciated. I followed this: http://www.swinc.com/resource/exch_faq_appxa.htm It is well written and is a great s...

OLE Server Issues and PDF's
I've seen the problems with this around, but as of yet, haven't found out a solution.... When a user inserts a PDF into a form, things work fine. When they open the attachment in the form, the file displays. When they close out, a box comes up saying "The operation on the Acrobat Document object failed. The OLE server may not be registered. To register the OLE server, reinstall it." My users are using Acrobat versions 7 or 8. Any help would be appreciated. Jeff G ...

Mass Assigning of Items to New Department
I have currently one large department called "stock items" that was created when the items were imported from my accounting software. I need to break these items down into more specific catagories, but I want to find a way that doesnt involve going one by one through my items and assigning new departments. Is there a way to do this more effieciently? Retail Realm has a store and HQ Utiliy in which one option is 37 new wizards one of which does exactly what you are asking. Please contact me for more information. Afshin Alikhani - [afshin@retailrealm.co.uk] CEO - Retail Real...

new CPUID
Thanks to those who sent me data. While I was flying to the MVP Summit I added new features to CPUID, including flyover help. The latest version is now on my site http://www.flounder.com/cpuid_explorer1htm joe Joseph M. Newcomer [MVP] email: newcomer@flounder.com Web: http://www.flounder.com MVP Tips: http://www.flounder.com/mvp_tips.htm ...

Excel>Data>Import External Data>New Web query
Hi I am trying to use Excel 2003 to import data from http://bigcharts.marketwatch.com/quotes/default.asp?refresh=on&rand=8519 I use new web query on the above url. I select the data in the block under 'My Favourite Quotes' The wizard behaves as expected but only returns 1 line not the 3 that have been selected. Can someone please give me some pointers on how I can get the 3 lines. Thanks Bruce ...

new contacts list
I've just got a new fangled phone that synchronises to my pc. The options to synchronise to are either lotus files (which I don't use) OE or outlook. I don't really want all my 100's of email addresses etc in my phone so i have a folder of contacts as vcf formats that I want to make into a separate outlook folder, just for synchronising with my phone but I can't work out how to do it! help! Make a new Contacts folder in Outlook and then drag & drop the vcf-files into the Contacts folder. Set your phone to synch with that folder. -- Roady [MVP] www.sparnaaij.net M...

proposed new time issue
we are running office 2007 on exchange 2003 I have one user who whenever he sends out a meeting invite and someone proposes a new time and he accepts the new time it places both the invites on the calendar and doesn't remove the original time. I asked him if he was being prompted to remove the original time and he said no any ideas why this might be happening and how to fix it? Thanks Lynn ...

EST/DST Time
hi i would like to make a cell that shows the time in EST throughout the year. Note: i have normal time set in my "Time And Date Property", which means it changes time with daylight saving. Please help me find a soltion so that i get EST time in that excel worksheet all thoughout the year. thank you. What is your normal time, pacific? If so use =TEXT(NOW()+3/24,"hh:mm") mountain =TEXT(NOW()+2/24,"hh:mm") central =TEXT(NOW()+1/24,"hh:mm") use n/24 depending on where you are -- Regards, Peo Sjoblom "Himu" <cricket_life@hotmai...

No new mail message
Is there a way to get Outlook to report there is no new mail? It works fine reporting new mail, but if there is no new mail, it would be nice to get a message. Otherwise I could have a problem receiving. If I could get a "no new mail" message, then I would know for sure. Bob Mannel No. -- Milly Staples [MVP - Outlook] Post all replies to the group to keep the discussion intact. "Bob Mannel" <bobmannel@charter.net> wrote in message news:0dbe01c3b462$03bf76e0$a001280a@phx.gbl... | Is there a way to get Outlook to report there is no new | mail? It works fin...

New install of IE8 makes my disk light flash 12-20-09
I usually use Firefox but I recently installed IE8. If I launch IE8 with a blank home page then my hard disk starts to do a lot of work. The hard disk works all the time while IE8 is launched even if I don't browse anything or touch IE8. When I close IE8 the disk activity stops. I hope IE8 isn't trying to index its way through my disk data because I have 500 GB! Could IE8 be downloading a lot of special data to identify dangerous web sites like Chrome does? I can't see any data being downloaded but maybe IE8 is doing a hidden download or something. A pop-up...

Help With New Forumla
I HAD POSTED THIS PROBLEM IF I SEND A STUDY ON 4/1/2004 @ 8:00A AND THEN SEND THE PAPER WORK ON 4/2/2004 @ 700A AND THEN REC. MY REPORT ON 4/4/04 @ 800P I AM LOOKING FOR A FORUMLA TO TELL ME WHAT THE TIME DELAY BETWEEN EACH OF THE ABOVE WOULD BE. I WAS GIVEN THIS FORUMLA =INT(B1)-INT(A1)-(MOD(A1,1))&"DAYS"& TEXT(MOD(B1,1)-MOD(A1,1)+(MOD(B1,1)<MOD(A1,1)),"hh:mm") I dont know how to set this up!! can someone please walk me through this? what part of this forumla goes in what cell? thanks joe jladika@millenniumimagingfl.com how can i reply back to you. do...

On Hand Quantity Point in Time
Ok, so I have figured out how to make a crystal report generate a on hand quantity for an item at any given time in the past. I have that now as a sub report and transfered the value in a variable to the main report to to perform other logic tasks but it has some issues. I can not sum or count any calculations for the report in total due to the nature in which the calculations are done so what I really need is someway for the SQL server to provide that answer. That is, given item X and date Y what was the quantity on hand on that day based on the sum of calculations and the adjusted be...

Adding Sequential numbers to a new feld in access table.
I am working with a table which is actually a merge of 14 other tables, therefore there is no real index key. Table 1 Index was 1-5000 Table 2 index was 1-5000 In the merged database there are about 52,000 records, but no index key. I added a field to the table named Index and would like to populate that field with a unique index number. Does anyone have any ideas on how I could create an update query which would add 1-52,000 to this field. Thank you for your help. rjcmi wrote: >I am working with a table which is actually a merge of 14 other >tables, therefore t...

Viewing of Proposal (under Proposals and Activities) work under My
We are about to enable Proposals and Activities in our Production Environment, but I'm observing a problem in My Tasks. The question is why our resources are unable to view their assignments generated under a Proposal Resource Plan. In our Dev Environment, I have a Proposal with two resources reserved under a Resource Plan (not via the Build Team button) using an FTE calculation. After the Proposal and Resource Plan were both published, both resources showed their time committed for this Proposal in the Resource Center. However, neither resource sees anything under M...

Backup And Restore Issues
I'm in the process of creating a backup server. I'm having problems backing up my exchange. I am using NTBACKUP, I choose to backup microsoft exchange server/pdc/microsoft information store/first storage group After running the backup I see 3 folders; log files, mailbox store and public folder store. There are no files inside these folders. SHouldn't there be database files there? Steve: How long does it take to backup? How big is the DB? "steve tysinger" wrote: > I'm in the process of creating a backup server. I'm having problems backing &g...

GP calculates new depreciation on a fully depreciated asset
We performed a mass change on a class of assets to change the Class ID and GL account number. After the mass change completed, we ran depreciation for the month, and some of the assets that were included in the mass change that were fully depreciated now show an amount in the Current Depreciation field (flagged as Y for Fully Depreciated and NBV shows as $0). A depreciation amount was also sent to the GL as part of the depreciation batch. We tried this in our TEST environment successfully. Does anyone know how this could have happened - that GP calculated and assigned a depre...

How not to paste into a new text box every time.
I have just installed Publisher 2003 and every time I try to paste into my text box, it puts the copied text into a new text box inside of my old text box. How do I paste into my selected text box? Edit|Paste Special - select unformatted text. (It is a bit of a pain, isn't it?) -- JoAnn Paules MVP Microsoft [Publisher] "CW616" <CW616@discussions.microsoft.com> wrote in message news:32F6E291-F131-47DA-878A-28C948E54DE2@microsoft.com... >I have just installed Publisher 2003 and every time I try to paste into my > text box, it puts the copied text into a new ...

Displays when new messages are received
I have used Outlook at work and I just set it up on my home computer. At work, whenever a new message is received a small envelope appears in the taskbar, right next to the time on the start menu. Is there a way that I can set this feature up on my home computer??? What version of Outlook are you using? -- Milly Staples [MVP - Outlook] Post all replies to the group to keep the discussion intact. Having searched the archives, Jessica <dancin720@hotmail.com> typed: | I have used Outlook at work and I just set it up on my | home computer. At work, whenever a new message is | r...

what message I get if new files is updated in the file system
Hi All, I have written my Folder browser functionality. Now I want to know When I add a File/Folder to a perticular directory. but it does not change/Update My Folder Browser. Can you please tell me what message that I need to process to synchronize my folder browser with the File System. Thanks Anup You might be able to use something like what David wrote in this article. This only works on NT based systems (I.E., no Win 98 or ME) http://www.codeproject.com/KB/system/FolderWatch.aspx Tom "Matrixinline" <anup.kataria@gmail.com> wrote in message news:401e3428-37b0-459c-...